@@ -30,6 +30,9 @@
#include <miiphy.h>
#include <lcd.h>
#include <led.h>
+#include <power/pmic.h>
+#include <power/regulator.h>
+#include <power/da9063_pmic.h>
#include <splash.h>
#include <video_fb.h>
@@ -438,6 +441,56 @@ static void aristainetos_bootmode_settings(void)
}
}
+#if defined(CONFIG_DM_PMIC_DA9063)
+/*
+ * On the aristainetos2c boards the PMIC needs to be initialized,
+ * because the Ethernet PHY uses a different regulator that is not
+ * setup per hardware default. This does not influence the other versions
+ * as this regulator isn't used there at all.
+ *
+ * Unfortunately we have not yet a interface to setup all
+ * values we need.
+ */
+static int setup_pmic_voltages(void)
+{
+ struct udevice *dev;
+ int off;
+ int ret;
+
+ off = fdt_path_offset(gd->fdt_blob, "pmic0");
+ if (off < 0) {
+ printf("%s: No pmic path offset\n", __func__);
+ return off;
+ }
+
+ ret = uclass_get_device_by_of_offset(UCLASS_PMIC, off, &dev);
+ if (ret) {
+ printf("%s: Could not find PMIC\n", __func__);
+ return ret;
+ }
+
+ pmic_reg_write(dev, DA9063_REG_PAGE_CON, 0x01);
+ pmic_reg_write(dev, DA9063_REG_BPRO_CFG, 0xc1);
+ ret = pmic_reg_read(dev, DA9063_REG_BUCK_ILIM_B);
+ if (ret < 0) {
+ printf("%s: error %d get register\n", __func__, ret);
+ return ret;
+ }
+ ret &= 0xf0;
+ ret |= 0x09;
+ pmic_reg_write(dev, DA9063_REG_BUCK_ILIM_B, ret);
+ pmic_reg_write(dev, DA9063_REG_VBPRO_A, 0x43);
+ pmic_reg_write(dev, DA9063_REG_VBPRO_B, 0xc3);
+
+ return 0;
+}
+#else
+static int setup_pmic_voltages(void)
+{
+ return 0;
+}
+#endif
+
int board_late_init(void)
{
int x, y;
@@ -457,6 +510,9 @@ int board_late_init(void)
else
env_set("board_type", ARI_BT_7);
+ if (setup_pmic_voltages())
+ printf("Error setup PMIC\n");
+
return 0;
}
@@ -87,7 +87,10 @@ CONFIG_PHY=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_IMX6=y
CONFIG_DM_PMIC=y
+# CONFIG_SPL_PMIC_CHILDREN is not set
+CONFIG_DM_PMIC_DA9063=y
CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_DA9063=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_PWM=y
CONFIG_PWM_IMX=y
On the aristainetos2c boards the PMIC needs to be initialized, because the Ethernet PHY uses a different regulator that is not setup per hardware default. This does not influence the other versions as this regulator isn't used there at all. Signed-off-by: Heiko Schocher <hs at denx.de> --- board/aristainetos/aristainetos.c | 56 +++++++++++++++++++++++++++++++ configs/aristainetos2c_defconfig | 3 ++ 2 files changed, 59 insertions(+)