diff mbox series

[v4,3/3] fastboot: Add default fastboot_set_reboot_flag implementation

Message ID bafde1d934ebce4a96f30c4769be4dca58caa31e.1592871839.git.roman.kovalivskyi@globallogic.com
State New
Headers show
Series Add support for booting into userspace fastboot | expand

Commit Message

Roman Kovalivskyi June 23, 2020, 12:27 a.m. UTC 
Default implementation of fastboot_set_reboot_flag function that depends
on "bcb" commands could be used in general case if there are no need to
make any platform-specific implementation, otherwise it could be
disabled via Kconfig option FASTBOOT_USE_BCB_SET_REBOOT_FLAG.

Please note that FASTBOOT_USE_BCB_SET_REBOOT_FLAG is mutually exclusive
with some platforms which already have their own implementation of this
function.

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi at globallogic.com>
---
 drivers/fastboot/Kconfig       | 12 +++++++++
 drivers/fastboot/Makefile      |  1 +
 drivers/fastboot/fb_bcb_impl.c | 48 ++++++++++++++++++++++++++++++++++
 3 files changed, 61 insertions(+)
 create mode 100644 drivers/fastboot/fb_bcb_impl.c
diff mbox series

Patch

diff --git a/drivers/fastboot/Kconfig b/drivers/fastboot/Kconfig
index d4436dfc9173..4352ba67a713 100644
--- a/drivers/fastboot/Kconfig
+++ b/drivers/fastboot/Kconfig
@@ -165,6 +165,18 @@  config FASTBOOT_CMD_OEM_FORMAT
 	  relies on the env variable partitions to contain the list of
 	  partitions as required by the gpt command.
 
+config FASTBOOT_USE_BCB_SET_REBOOT_FLAG
+	bool "Use BCB by fastboot to set boot reason"
+	depends on CMD_BCB && !ARCH_MESON && !ARCH_ROCKCHIP && !TARGET_KC1 && \
+	  !TARGET_SNIPER && !TARGET_AM57XX_EVM && !TARGET_DRA7XX_EVM
+	default y
+	help
+	  Fastboot could implement setting of reboot reason in a generic fashion
+	  via BCB commands. BCB commands are able to write reboot reason into
+	  command field of boot control block. In general case it is sufficient
+	  implementation if your platform supports BCB commands and doesn't
+	  require any specific reboot reason handling.
+
 endif # FASTBOOT
 
 endmenu
diff --git a/drivers/fastboot/Makefile b/drivers/fastboot/Makefile
index 048af5aa8234..2b2c390fe4de 100644
--- a/drivers/fastboot/Makefile
+++ b/drivers/fastboot/Makefile
@@ -5,3 +5,4 @@  obj-y += fb_getvar.o
 obj-y += fb_command.o
 obj-$(CONFIG_FASTBOOT_FLASH_MMC) += fb_mmc.o
 obj-$(CONFIG_FASTBOOT_FLASH_NAND) += fb_nand.o
+obj-$(CONFIG_FASTBOOT_USE_BCB_SET_REBOOT_FLAG) += fb_bcb_impl.o
diff --git a/drivers/fastboot/fb_bcb_impl.c b/drivers/fastboot/fb_bcb_impl.c
new file mode 100644
index 000000000000..a5ae94e2e357
--- /dev/null
+++ b/drivers/fastboot/fb_bcb_impl.c
@@ -0,0 +1,48 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 GlobalLogic.
+ * Roman Kovalivskyi <roman.kovalivskyi at globallogic.com>
+ */
+
+#include <common.h>
+#include <fastboot.h>
+
+/**
+ * fastboot_set_reboot_flag() - Set flag to indicate reboot-bootloader
+ *
+ * Set flag which indicates that we should reboot into the bootloader
+ * following the reboot that fastboot executes after this function.
+ *
+ * This function should be overridden in your board file with one
+ * which sets whatever flag your board specific Android bootloader flow
+ * requires in order to re-enter the bootloader.
+ */
+int fastboot_set_reboot_flag(enum fastboot_reboot_reason reason)
+{
+	static const char * const boot_cmds[] = {
+		"bootonce-bootloader",
+		"boot-fastboot",
+		"boot-recovery"
+	};
+
+	char cmd[32];
+
+	if (reason >= FASTBOOT_REBOOT_REASONS_COUNT)
+		return -EINVAL;
+
+	snprintf(cmd, sizeof(cmd), "bcb load %d misc",
+		 CONFIG_FASTBOOT_FLASH_MMC_DEV);
+
+	if (run_command(cmd, 0))
+		return -ENODEV;
+
+	snprintf(cmd, sizeof(cmd), "bcb set command %s", boot_cmds[reason]);
+
+	if (run_command(cmd, 0))
+		return -ENOEXEC;
+
+	if (run_command("bcb store", 0))
+		return -EIO;
+
+	return 0;
+}