@@ -8,12 +8,11 @@ ifdef CONFIG_DM_SPI
obj-y += spi-uclass.o
obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
obj-$(CONFIG_SOFT_SPI) += soft_spi.o
-obj-$(CONFIG_SPI_MEM) += spi-mem.o
obj-$(CONFIG_TI_QSPI) += ti_qspi.o
else
obj-y += spi.o
-obj-$(CONFIG_SPI_MEM) += spi-mem-nodm.o
endif
+obj-$(CONFIG_SPI_MEM) += spi-mem.o
obj-$(CONFIG_ALTERA_SPI) += altera_spi.o
obj-$(CONFIG_ATH79_SPI) += ath79_spi.o
deleted file mode 100644
@@ -1,107 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
- */
-
-#include <log.h>
-#include <malloc.h>
-#include <spi.h>
-#include <spi-mem.h>
-
-int spi_mem_exec_op(struct spi_slave *slave,
- const struct spi_mem_op *op)
-{
- unsigned int pos = 0;
- const u8 *tx_buf = NULL;
- u8 *rx_buf = NULL;
- u8 *op_buf;
- int op_len;
- u32 flag;
- int ret;
- int i;
-
- if (op->data.nbytes) {
- if (op->data.dir == SPI_MEM_DATA_IN)
- rx_buf = op->data.buf.in;
- else
- tx_buf = op->data.buf.out;
- }
-
- op_len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
- op_buf = calloc(1, op_len);
-
- ret = spi_claim_bus(slave);
- if (ret < 0)
- return ret;
-
- op_buf[pos++] = op->cmd.opcode;
-
- if (op->addr.nbytes) {
- for (i = 0; i < op->addr.nbytes; i++)
- op_buf[pos + i] = op->addr.val >>
- (8 * (op->addr.nbytes - i - 1));
-
- pos += op->addr.nbytes;
- }
-
- if (op->dummy.nbytes)
- memset(op_buf + pos, 0xff, op->dummy.nbytes);
-
- /* 1st transfer: opcode + address + dummy cycles */
- flag = SPI_XFER_BEGIN;
- /* Make sure to set END bit if no tx or rx data messages follow */
- if (!tx_buf && !rx_buf)
- flag |= SPI_XFER_END;
-
- ret = spi_xfer(slave, op_len * 8, op_buf, NULL, flag);
- if (ret)
- return ret;
-
- /* 2nd transfer: rx or tx data path */
- if (tx_buf || rx_buf) {
- ret = spi_xfer(slave, op->data.nbytes * 8, tx_buf,
- rx_buf, SPI_XFER_END);
- if (ret)
- return ret;
- }
-
- spi_release_bus(slave);
-
- for (i = 0; i < pos; i++)
- debug("%02x ", op_buf[i]);
- debug("| [%dB %s] ",
- tx_buf || rx_buf ? op->data.nbytes : 0,
- tx_buf || rx_buf ? (tx_buf ? "out" : "in") : "-");
- for (i = 0; i < op->data.nbytes; i++)
- debug("%02x ", tx_buf ? tx_buf[i] : rx_buf[i]);
- debug("[ret %d]\n", ret);
-
- free(op_buf);
-
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int spi_mem_adjust_op_size(struct spi_slave *slave,
- struct spi_mem_op *op)
-{
- unsigned int len;
-
- len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
- if (slave->max_write_size && len > slave->max_write_size)
- return -EINVAL;
-
- if (op->data.dir == SPI_MEM_DATA_IN && slave->max_read_size)
- op->data.nbytes = min(op->data.nbytes,
- slave->max_read_size);
- else if (slave->max_write_size)
- op->data.nbytes = min(op->data.nbytes,
- slave->max_write_size - len);
-
- if (!op->data.nbytes)
- return -EINVAL;
-
- return 0;
-}
@@ -105,6 +105,19 @@ void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data);
#endif /* __UBOOT__ */
+static inline
+struct spi_controller_mem_ops *spi_get_mem_ops(struct spi_slave *slave)
+{
+#ifdef CONFIG_DM_SPI
+ struct udevice *bus = slave->dev->parent;
+ struct dm_spi_ops *ops = spi_get_ops(bus);
+
+ return ops->mem_ops;
+#else
+ return slave->mem_ops;
+#endif
+}
+
static int spi_check_buswidth_req(struct spi_slave *slave, u8 buswidth, bool tx)
{
u32 mode = slave->mode;
@@ -181,11 +193,10 @@ EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
bool spi_mem_supports_op(struct spi_slave *slave,
const struct spi_mem_op *op)
{
- struct udevice *bus = slave->dev->parent;
- struct dm_spi_ops *ops = spi_get_ops(bus);
+ struct spi_controller_mem_ops *mem_ops = spi_get_mem_ops(slave);
- if (ops->mem_ops && ops->mem_ops->supports_op)
- return ops->mem_ops->supports_op(slave, op);
+ if (mem_ops && mem_ops->supports_op)
+ return mem_ops->supports_op(slave, op);
return spi_mem_default_supports_op(slave, op);
}
@@ -205,8 +216,7 @@ EXPORT_SYMBOL_GPL(spi_mem_supports_op);
*/
int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
{
- struct udevice *bus = slave->dev->parent;
- struct dm_spi_ops *ops = spi_get_ops(bus);
+ struct spi_controller_mem_ops *mem_ops = spi_get_mem_ops(slave);
unsigned int pos = 0;
const u8 *tx_buf = NULL;
u8 *rx_buf = NULL;
@@ -222,7 +232,7 @@ int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
if (ret < 0)
return ret;
- if (ops->mem_ops && ops->mem_ops->exec_op) {
+ if (mem_ops && mem_ops->exec_op) {
#ifndef __UBOOT__
/*
* Flush the message queue before executing our SPI memory
@@ -243,7 +253,8 @@ int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
mutex_lock(&ctlr->bus_lock_mutex);
mutex_lock(&ctlr->io_mutex);
#endif
- ret = ops->mem_ops->exec_op(slave, op);
+
+ ret = mem_ops->exec_op(slave, op);
#ifndef __UBOOT__
mutex_unlock(&ctlr->io_mutex);
@@ -425,13 +436,12 @@ EXPORT_SYMBOL_GPL(spi_mem_exec_op);
*/
int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
{
- struct udevice *bus = slave->dev->parent;
- struct dm_spi_ops *ops = spi_get_ops(bus);
+ struct spi_controller_mem_ops *mem_ops = spi_get_mem_ops(slave);
- if (ops->mem_ops && ops->mem_ops->adjust_op_size)
- return ops->mem_ops->adjust_op_size(slave, op);
+ if (mem_ops && mem_ops->adjust_op_size)
+ return mem_ops->adjust_op_size(slave, op);
- if (!ops->mem_ops || !ops->mem_ops->exec_op) {
+ if (!mem_ops || !mem_ops->exec_op) {
unsigned int len;
len = sizeof(op->cmd.opcode) + op->addr.nbytes +
@@ -450,6 +460,7 @@ int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
if (!op->data.nbytes)
return -EINVAL;
+
}
return 0;
@@ -138,6 +138,7 @@ struct spi_slave {
#else
unsigned int bus;
unsigned int cs;
+ struct spi_controller_mem_ops *mem_ops;
#endif
uint mode;
unsigned int wordlen;