@@ -285,7 +285,7 @@ config BUILD_TARGET
default "u-boot-with-spl.sfp" if TARGET_SOCFPGA_GEN5
default "u-boot-spl.kwb" if ARCH_MVEBU && SPL
default "u-boot-elf.srec" if RCAR_GEN3
- default "u-boot.itb" if SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
+ default "u-boot.itb" if !BINMAN && SPL_LOAD_FIT && (ARCH_ROCKCHIP || \
ARCH_SUNXI || RISCV || ARCH_ZYNQMP)
default "u-boot.kwb" if ARCH_KIRKWOOD
default "u-boot-with-spl.bin" if ARCH_AT91 && SPL_NAND_SUPPORT
new file mode 100644
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 Google LLC
+ */
+
+#ifdef CONFIG_SPL_OPTEE
+
+/ {
+ binman: binman {
+ multiple-images;
+ };
+};
+
+#include <config.h>
+
+&binman {
+ itb {
+ filename = "u-boot.itb";
+ fit {
+ fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
+ description = "FIT image with OP-TEE support";
+ #address-cells = <1>;
+
+ images {
+ uboot {
+ description = "U-Boot";
+ type = "standalone";
+ os = "U-Boot";
+ arch = "arm";
+ compression = "none";
+ load = <CONFIG_SYS_TEXT_BASE>;
+
+ u-boot-nodtb {
+ };
+ };
+ optee {
+ description = "OP-TEE";
+ type = "firmware";
+ arch = "arm";
+ os = "tee";
+ compression = "none";
+ load = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+ entry = <(CONFIG_SYS_SDRAM_BASE + 0x8400000)>;
+
+ blob-ext {
+ filename = "tee.bin";
+ };
+ };
+ fdt {
+ description = CONFIG_SYS_BOARD;
+ type = "flat_dt";
+ compression = "none";
+
+ u-boot-dtb {
+ };
+ };
+ };
+
+ configurations {
+ default = "conf";
+ conf {
+ description = CONFIG_SYS_BOARD;
+ firmware = "optee";
+ loadables = "uboot";
+ fdt = "fdt";
+ };
+ };
+ };
+ };
+};
+
+#endif
@@ -9,6 +9,7 @@
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3228-cru.h>
#include <dt-bindings/thermal/thermal.h>
+#include "rk322x-u-boot.dtsi"
/ {
#address-cells = <1>;
@@ -4,6 +4,7 @@
*/
#include "rockchip-u-boot.dtsi"
+#include "rk322x-u-boot.dtsi"
/ {
chosen {
@@ -14,7 +14,7 @@ CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
-CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/fit_spl_optee.sh"
+# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_USE_PREBOOT=y
CONFIG_SILENT_CONSOLE=y
CONFIG_DEFAULT_FDT_FILE="rk3288-evb-rk808.dtb"
At present this board uses a custom script to produce the .its file. Update it to use binman instead. Binman can create all the images that are needed. Signed-off-by: Simon Glass <sjg at chromium.org> --- (no changes since v1) Kconfig | 2 +- arch/arm/dts/rk322x-u-boot.dtsi | 72 +++++++++++++++++++++++++++++++++ arch/arm/dts/rk322x.dtsi | 1 + arch/arm/dts/rk3288-u-boot.dtsi | 1 + configs/evb-rk3288_defconfig | 2 +- 5 files changed, 76 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/rk322x-u-boot.dtsi