| Message ID | 20200607234347.2392-1-xypron.glpk@gmx.de |
|---|---|
| State | Accepted |
| Commit | a1f79c2170ba425972d626cc6351bcdef2ca9d08 |
| Headers | show |
| Series | [1/1] arm: wandboard: move CONFIG_MXC_UART to defconfig | expand |
On Sun, Jun 7, 2020 at 8:44 PM Heinrich Schuchardt <xypron.glpk at gmx.de> wrote: > > For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in > the .config file. > > To avoid duplicate definitions move the setting from > include/configs/wandboard.h to configs/wandboard_defconfig. > > Document the debug UART settings in the README. > > Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in > the .config file. > To avoid duplicate definitions move the setting from > include/configs/wandboard.h to configs/wandboard_defconfig. > Document the debug UART settings in the README. > Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de> > Reviewed-by: Fabio Estevam <festevam at gmail.com> Applied to u-boot-imx, master, thanks ! Best regards, Stefano Babic
diff --git a/board/wandboard/README b/board/wandboard/README index f84f205337..2d514a7214 100644 --- a/board/wandboard/README +++ b/board/wandboard/README @@ -37,3 +37,13 @@ as the mx6 processor) - Connect the serial cable to the host PC - Power up the board and U-Boot messages will appear in the serial console. + +Debug UART +---------- + +The following settings provide a debug UART for the Wandboard: + +CONFIG_DEBUG_UART=y +CONFIG_DEBUG_UART_MXC=y +CONFIG_DEBUG_UART_BASE=0x02020000 +CONFIG_DEBUG_UART_CLOCK=80000000 diff --git a/configs/wandboard_defconfig b/configs/wandboard_defconfig index 82e517b90f..2040e2df67 100644 --- a/configs/wandboard_defconfig +++ b/configs/wandboard_defconfig @@ -68,6 +68,7 @@ CONFIG_PINCTRL_IMX6=y CONFIG_DM_PMIC=y CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_SCSI=y +CONFIG_MXC_UART=y CONFIG_DM_THERMAL=y CONFIG_USB=y CONFIG_DM_USB=y diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h index a65d23bbe8..ae064f1eb6 100644 --- a/include/configs/wandboard.h +++ b/include/configs/wandboard.h @@ -17,7 +17,6 @@ /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) -#define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE /* SATA Configs */
For using a debug UART on the Wandboard CONFIG_MXC_UART=y must be set in the .config file. To avoid duplicate definitions move the setting from include/configs/wandboard.h to configs/wandboard_defconfig. Document the debug UART settings in the README. Signed-off-by: Heinrich Schuchardt <xypron.glpk at gmx.de> --- board/wandboard/README | 10 ++++++++++ configs/wandboard_defconfig | 1 + include/configs/wandboard.h | 1 - 3 files changed, 11 insertions(+), 1 deletion(-) -- 2.20.1