@@ -36,6 +36,7 @@ config BCM2711_32B
select BCM2711
select ARMV7_LPAE
select CPU_V7A
+ select PHYS_64BIT
config BCM2711_64B
bool "Broadcom BCM2711 SoC 64-bit support"
@@ -8,4 +8,12 @@
extern unsigned long rpi_bcm283x_base;
+#ifdef CONFIG_ARMV7_LPAE
+#ifdef CONFIG_TARGET_RPI_4_32B
+#include <addr_map.h>
+#define phys_to_virt addrmap_phys_to_virt
+#define virt_to_phys addrmap_virt_to_phys
+#endif
+#endif
+
#endif
@@ -146,6 +146,27 @@ int mach_cpu_init(void)
}
#ifdef CONFIG_ARMV7_LPAE
+#ifdef CONFIG_TARGET_RPI_4_32B
+#define BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT 0xff800000UL
+#include <addr_map.h>
+#include <asm/system.h>
+
+void init_addr_map(void)
+{
+ mmu_set_region_dcache_behaviour_phys(BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT,
+ BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+ BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE,
+ DCACHE_OFF);
+
+ /* identity mapping for 0..BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT */
+ addrmap_set_entry(0, 0, BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT, 0);
+ /* XHCI MMIO on PCIe at BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT */
+ addrmap_set_entry(BCM2711_RPI4_PCIE_XHCI_MMIO_VIRT,
+ BCM2711_RPI4_PCIE_XHCI_MMIO_PHYS,
+ BCM2711_RPI4_PCIE_XHCI_MMIO_SIZE, 1);
+}
+#endif
+
void enable_caches(void)
{
dcache_enable();
Create a non-cacheable mapping for the 0x600000000 physical memory region, where MMIO registers for the PCIe XHCI controller are instantiated by the PCIe bridge. Due to 32bit limit in the CPU virtual address space in ARM 32bit mode, this region is mapped at 0xff800000 CPU virtual address. Signed-off-by: Marek Szyprowski <m.szyprowski at samsung.com> --- arch/arm/mach-bcm283x/Kconfig | 1 + arch/arm/mach-bcm283x/include/mach/base.h | 8 ++++++++ arch/arm/mach-bcm283x/init.c | 21 +++++++++++++++++++++ 3 files changed, 30 insertions(+)