diff mbox series

[v7,3/3] dm: uclass: don't assign aliased seq numbers

Message ID 20200601234709.31121-4-michael@walle.cc
State Superseded
Headers show
Series dm: uclass: don't assign aliased seq numbers | expand

Commit Message

Michael Walle June 1, 2020, 11:47 p.m. UTC 
If there are aliases for an uclass, set the base for the "dynamically"
allocated numbers next to the highest alias.

Please note, that this might lead to holes in the sequences, depending
on the device tree. For example if there is only an alias "ethernet1",
the next device seq number would be 2.

In particular this fixes a problem with boards which are using ethernet
aliases but also might have network add-in cards like the E1000. If the
board is started with the add-in card and depending on the order of the
drivers, the E1000 might occupy the first ethernet device and mess up
all the hardware addresses, because the devices are now shifted by one.

Also adapt the test cases to the new handling and add test cases
checking the holes in the seq numbers.

Signed-off-by: Michael Walle <michael at walle.cc>
Reviewed-by: Alex Marginean <alexandru.marginean at nxp.com>
Tested-by: Alex Marginean <alexandru.marginean at nxp.com>
Acked-by: Vladimir Oltean <olteanv at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Tested-by: Michal Simek <michal.simek at xilinx.com> [on zcu102-revA]
---
 arch/sandbox/dts/test.dts |  4 ++--
 drivers/core/uclass.c     | 21 +++++++++++++++------
 include/configs/sandbox.h |  6 +++---
 test/dm/eth.c             | 14 +++++++-------
 test/dm/test-fdt.c        | 22 +++++++++++++++++-----
 5 files changed, 44 insertions(+), 23 deletions(-)

Comments

Simon Glass June 13, 2020, 3:11 a.m. UTC | #1 
If there are aliases for an uclass, set the base for the "dynamically"
allocated numbers next to the highest alias.

Please note, that this might lead to holes in the sequences, depending
on the device tree. For example if there is only an alias "ethernet1",
the next device seq number would be 2.

In particular this fixes a problem with boards which are using ethernet
aliases but also might have network add-in cards like the E1000. If the
board is started with the add-in card and depending on the order of the
drivers, the E1000 might occupy the first ethernet device and mess up
all the hardware addresses, because the devices are now shifted by one.

Also adapt the test cases to the new handling and add test cases
checking the holes in the seq numbers.

Signed-off-by: Michael Walle <michael at walle.cc>
Reviewed-by: Alex Marginean <alexandru.marginean at nxp.com>
Tested-by: Alex Marginean <alexandru.marginean at nxp.com>
Acked-by: Vladimir Oltean <olteanv at gmail.com>
Reviewed-by: Simon Glass <sjg at chromium.org>
Tested-by: Michal Simek <michal.simek at xilinx.com> [on zcu102-revA]
---
 arch/sandbox/dts/test.dts |  4 ++--
 drivers/core/uclass.c     | 21 +++++++++++++++------
 include/configs/sandbox.h |  6 +++---
 test/dm/eth.c             | 14 +++++++-------
 test/dm/test-fdt.c        | 22 +++++++++++++++++-----
 5 files changed, 44 insertions(+), 23 deletions(-)

Applied to u-boot-dm, thanks!
diff mbox series

Patch

diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts
index b9255e4593..a6e2bfd082 100644
--- a/arch/sandbox/dts/test.dts
+++ b/arch/sandbox/dts/test.dts
@@ -23,8 +23,8 @@ 
 		pci0 = &pci0;
 		pci1 = &pci1;
 		pci2 = &pci2;
-		remoteproc1 = &rproc_1;
-		remoteproc2 = &rproc_2;
+		remoteproc0 = &rproc_1;
+		remoteproc1 = &rproc_2;
 		rtc0 = &rtc_0;
 		rtc1 = &rtc_1;
 		spi0 = "/spi at 0";
diff --git a/drivers/core/uclass.c b/drivers/core/uclass.c
index 2ab419cfe4..c3f1b73cd6 100644
--- a/drivers/core/uclass.c
+++ b/drivers/core/uclass.c
@@ -689,13 +689,14 @@  int uclass_unbind_device(struct udevice *dev)
 
 int uclass_resolve_seq(struct udevice *dev)
 {
+	struct uclass *uc = dev->uclass;
+	struct uclass_driver *uc_drv = uc->uc_drv;
 	struct udevice *dup;
-	int seq;
+	int seq = 0;
 	int ret;
 
 	assert(dev->seq == -1);
-	ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, dev->req_seq,
-					false, &dup);
+	ret = uclass_find_device_by_seq(uc_drv->id, dev->req_seq, false, &dup);
 	if (!ret) {
 		dm_warn("Device '%s': seq %d is in use by '%s'\n",
 			dev->name, dev->req_seq, dup->name);
@@ -707,9 +708,17 @@  int uclass_resolve_seq(struct udevice *dev)
 		return ret;
 	}
 
-	for (seq = 0; seq < DM_MAX_SEQ; seq++) {
-		ret = uclass_find_device_by_seq(dev->uclass->uc_drv->id, seq,
-						false, &dup);
+	if (CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_SEQ_ALIAS) &&
+	    (uc_drv->flags & DM_UC_FLAG_SEQ_ALIAS)) {
+		/*
+		 * dev_read_alias_highest_id() will return -1 if there no
+		 * alias. Thus we can always add one.
+		 */
+		seq = dev_read_alias_highest_id(uc_drv->name) + 1;
+	}
+
+	for (; seq < DM_MAX_SEQ; seq++) {
+		ret = uclass_find_device_by_seq(uc_drv->id, seq, false, &dup);
 		if (ret == -ENODEV)
 			break;
 		if (ret)
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index 484a15df79..a2c9811eca 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -95,9 +95,9 @@ 
 #endif
 
 #define SANDBOX_ETH_SETTINGS		"ethaddr=00:00:11:22:33:44\0" \
-					"eth1addr=00:00:11:22:33:45\0" \
-					"eth3addr=00:00:11:22:33:46\0" \
-					"eth5addr=00:00:11:22:33:47\0" \
+					"eth3addr=00:00:11:22:33:45\0" \
+					"eth5addr=00:00:11:22:33:46\0" \
+					"eth6addr=00:00:11:22:33:47\0" \
 					"ipaddr=1.2.3.4\0"
 
 #define MEM_LAYOUT_ENV_SETTINGS \
diff --git a/test/dm/eth.c b/test/dm/eth.c
index 1fddcaabb0..b58c9640a2 100644
--- a/test/dm/eth.c
+++ b/test/dm/eth.c
@@ -48,7 +48,7 @@  static int dm_test_eth_alias(struct unit_test_state *uts)
 	ut_assertok(net_loop(PING));
 	ut_asserteq_str("eth at 10002000", env_get("ethact"));
 
-	env_set("ethact", "eth1");
+	env_set("ethact", "eth6");
 	ut_assertok(net_loop(PING));
 	ut_asserteq_str("eth at 10004000", env_get("ethact"));
 
@@ -105,7 +105,7 @@  static int dm_test_eth_act(struct unit_test_state *uts)
 	const char *ethname[DM_TEST_ETH_NUM] = {"eth at 10002000", "eth at 10003000",
 						"sbe5", "eth at 10004000"};
 	const char *addrname[DM_TEST_ETH_NUM] = {"ethaddr", "eth5addr",
-						 "eth3addr", "eth1addr"};
+						 "eth3addr", "eth6addr"};
 	char ethaddr[DM_TEST_ETH_NUM][18];
 	int i;
 
@@ -188,15 +188,15 @@  static int dm_test_eth_rotate(struct unit_test_state *uts)
 
 	/* Invalidate eth1's MAC address */
 	memset(ethaddr, '\0', sizeof(ethaddr));
-	strncpy(ethaddr, env_get("eth1addr"), 17);
-	/* Must disable access protection for eth1addr before clearing */
-	env_set(".flags", "eth1addr");
-	env_set("eth1addr", NULL);
+	strncpy(ethaddr, env_get("eth6addr"), 17);
+	/* Must disable access protection for eth6addr before clearing */
+	env_set(".flags", "eth6addr");
+	env_set("eth6addr", NULL);
 
 	retval = _dm_test_eth_rotate1(uts);
 
 	/* Restore the env */
-	env_set("eth1addr", ethaddr);
+	env_set("eth6addr", ethaddr);
 	env_set("ethrotate", NULL);
 
 	if (!retval) {
diff --git a/test/dm/test-fdt.c b/test/dm/test-fdt.c
index 4fcae03dc5..51f2547409 100644
--- a/test/dm/test-fdt.c
+++ b/test/dm/test-fdt.c
@@ -361,20 +361,32 @@  static int dm_test_fdt_uclass_seq(struct unit_test_state *uts)
 	ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 2, &dev));
 	ut_asserteq_str("d-test", dev->name);
 
-	/* d-test actually gets 0 */
-	ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 0, &dev));
+	/*
+	 * d-test actually gets 9, because thats the next free one after the
+	 * aliases.
+	 */
+	ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 9, &dev));
 	ut_asserteq_str("d-test", dev->name);
 
-	/* initially no one wants seq 1 */
-	ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 1,
+	/* initially no one wants seq 10 */
+	ut_asserteq(-ENODEV, uclass_get_device_by_seq(UCLASS_TEST_FDT, 10,
 						      &dev));
 	ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 0, &dev));
 	ut_assertok(uclass_get_device(UCLASS_TEST_FDT, 4, &dev));
 
 	/* But now that it is probed, we can find it */
-	ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 1, &dev));
+	ut_assertok(uclass_get_device_by_seq(UCLASS_TEST_FDT, 10, &dev));
 	ut_asserteq_str("f-test", dev->name);
 
+	/*
+	 * And we should still have holes in our sequence numbers, that is 2
+	 * and 4 should not be used.
+	 */
+	ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 2,
+						       true, &dev));
+	ut_asserteq(-ENODEV, uclass_find_device_by_seq(UCLASS_TEST_FDT, 4,
+						       true, &dev));
+
 	return 0;
 }
 DM_TEST(dm_test_fdt_uclass_seq, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);