diff mbox series

[v5,5/5] roc-rk3399-pc: Set LED only during POR and pwr_key=y

Message ID 20200714093229.28763-6-jagan@amarulasolutions.com
State New
Headers show
Series roc-rk3399-pc: Custom SPL | expand

Commit Message

Jagan Teki July 14, 2020, 9:32 a.m. UTC 
ROC-RK3399-PC has specific set of configurations for
on-board led setup.

Due to easiness for user to know the state of the board
roc-rk339-pc board code will setup the low power led
on/off, and waiting for user to press power key and then
glow full power led.

All this needs to happen only during power-on-reset not
for soft reset or WDT.

Also, it is not a proper usage to ask the user to press
the Power key if the board connected remotely, so add
the environment variable 'pwr_key' to check as well.

So, user need to press Power key only
- during POR
- pwr_key=y

Tested-by: Suniel Mahesh <sunil at amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v5:
- add changes on board file

 board/firefly/roc-pc-rk3399/roc-pc-rk3399.c | 35 ++++++++++++++++++++-
 configs/roc-pc-mezzanine-rk3399_defconfig   |  3 ++
 configs/roc-pc-rk3399_defconfig             |  3 ++
 3 files changed, 40 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
index 4db3dd739c..ff2dc028a1 100644
--- a/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
+++ b/board/firefly/roc-pc-rk3399/roc-pc-rk3399.c
@@ -5,19 +5,52 @@ 
 
 #include <common.h>
 #include <dm.h>
+#include <env.h>
 #include <log.h>
 #include <spl_gpio.h>
+#include <asm/io.h>
 #include <power/regulator.h>
 
+#include <asm/arch-rockchip/cru.h>
 #include <asm/arch-rockchip/gpio.h>
+#include <asm/arch-rockchip/grf_rk3399.h>
 
+#define PMUGRF_BASE		0xff320000
 #define GPIO0_BASE		0xff720000
 
+/**
+ * LED setup for roc-rk3399-pc
+ *
+ * 1. Set the low power leds (only during POR, pwr_key env is 'y')
+ *    glow yellow LED, termed as low power
+ *    poll for on board power key press
+ *    once powe key pressed, turn off yellow
+ * 2. Turn on red LED, indicating full power mode
+ */
 static int led_setup(void)
 {
 	struct rockchip_gpio_regs * const gpio0 = (void *)GPIO0_BASE;
+	struct rk3399_pmugrf_regs * const pmugrf = (void *)PMUGRF_BASE;
+	bool press_pwr_key = false;
+
+	if (IS_ENABLED(CONFIG_SPL_ENV_SUPPORT)) {
+		env_init();
+		env_load();
+		if (env_get_yesno("pwr_key") == 1)
+			press_pwr_key = true;
+	}
+
+	if (press_pwr_key && !strcmp(get_reset_cause(), "POR")) {
+		spl_gpio_output(gpio0, GPIO(BANK_A, 2), 1);
+
+		spl_gpio_set_pull(&pmugrf->gpio0_p, GPIO(BANK_A, 5),
+				  GPIO_PULL_NORMAL);
+		while (readl(&gpio0->ext_port) & 0x20)
+			;
+
+		spl_gpio_output(gpio0, GPIO(BANK_A, 2), 0);
+	}
 
-	/* Turn on red LED, indicating full power mode */
 	spl_gpio_output(gpio0, GPIO(BANK_B, 5), 1);
 
 	return 0;
diff --git a/configs/roc-pc-mezzanine-rk3399_defconfig b/configs/roc-pc-mezzanine-rk3399_defconfig
index 15d511741f..14cda5850e 100644
--- a/configs/roc-pc-mezzanine-rk3399_defconfig
+++ b/configs/roc-pc-mezzanine-rk3399_defconfig
@@ -8,6 +8,7 @@  CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_SPL_DM_SPI=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROC_PC_RK3399=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x20000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
@@ -20,6 +21,7 @@  CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
@@ -34,6 +36,7 @@  CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc-mezzanine"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig
index 2a6d0d22c8..85f5c8f86b 100644
--- a/configs/roc-pc-rk3399_defconfig
+++ b/configs/roc-pc-rk3399_defconfig
@@ -8,6 +8,7 @@  CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_SPL_DM_SPI=y
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROC_PC_RK3399=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x20000
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
@@ -20,6 +21,7 @@  CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_ENV_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
@@ -33,6 +35,7 @@  CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_MISC=y