@@ -37,7 +37,8 @@
<&adi1_default_mode>,
<&usbuicc_default_mode>,
<&dmic_default_mode>,
- <&extcpena_default_mode>;
+ <&extcpena_default_mode>,
+ <&modsclsda_default_mode>;
/*
* Pins 2, 4, 10, 11, 12, 13, 16, 24, 25, 36, 37, 38, 39 and 42
@@ -354,6 +355,21 @@
};
};
};
+ /* Modem I2C setup (SCL and SDA pins) */
+ modsclsda {
+ modsclsda_default_mode: modsclsda_default {
+ default_mux {
+ ste,function = "modsclsda";
+ ste,pins = "modsclsda_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO40_T19",
+ "GPIO41_U19";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
};
};
};
@@ -55,14 +55,6 @@ static struct pinctrl_map __initdata ab8500_pinmap[] = {
/* sysclkreq4 disable, mux in gpio configured in input pulldown */
AB8500_MUX_STATE("gpio3_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
AB8500_PIN_STATE("GPIO3_U9", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
- /*
- * pins 40 and 41 are muxed in MODCSLSDA
- * configured INPUT PULL DOWN
- */
- AB8500_MUX_HOG("modsclsda_d_1", "modsclsda"),
- AB8500_PIN_HOG("GPIO40_T19", in_pd),
- AB8500_PIN_HOG("GPIO41_U19", in_pd),
};
static struct pinctrl_map __initdata ab8505_pinmap[] = {
This moves the pin setup of the AB8500 modem I2C pins (SCL/SDA) from the board file to the device tree. Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/arm/boot/dts/ste-href-ab8500.dtsi | 18 +++++++++++++++++- arch/arm/mach-ux500/board-mop500-pins.c | 8 -------- 2 files changed, 17 insertions(+), 9 deletions(-)