| Message ID | 20200710125523.68008-4-chee.hong.ang@intel.com |
|---|---|
| State | Accepted |
| Commit | 35d847ed908d3b1d6e58d95b3b9f326111343df5 |
| Headers | show |
| Series | Agilex's clock driver updates and fixes | expand |
> -----Original Message----- > From: Ang, Chee Hong <chee.hong.ang at intel.com> > Sent: Friday, July 10, 2020 8:55 PM > To: u-boot at lists.denx.de > Cc: Marek Vasut <marex at denx.de>; Simon Goldschmidt > <simon.k.r.goldschmidt at gmail.com>; See, Chin Liang > <chin.liang.see at intel.com>; Tan, Ley Foon <ley.foon.tan at intel.com>; Ang, > Chee Hong <chee.hong.ang at intel.com> > Subject: [PATCH v1 3/4] clk: agilex: Handle clock configuration differently in > SPL and U-Boot proper > > Since warm reset may optionally set the CLock Manager to'boot mode', the > clock driver should always force the Agilex's Clock Manager to 'boot mode' > before the clock driver start configuring the Clock Manager in SPL. > In SSBL, clock driver will skip the Clock Manager configuration if it's already > being setup by SPL (Clock Manager NOT in 'boot > mode') to prevent any inaccurate clocking issues happened on HPS > peripherals such as UART, MAC and etc. > > Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com> > --- > drivers/clk/altera/clk-agilex.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c > index b5cf187364..c83eb2efb9 100644 > --- a/drivers/clk/altera/clk-agilex.c > +++ b/drivers/clk/altera/clk-agilex.c > @@ -171,6 +171,16 @@ static void clk_basic_init(struct udevice *dev, > if (!cfg) > return; > > +#ifdef CONFIG_SPL_BUILD > + /* Always force clock manager into boot mode before any > configuration */ > + clk_write_ctrl(plat, > + CM_REG_READL(plat, CLKMGR_CTRL) | > CLKMGR_CTRL_BOOTMODE); #else "#else" is at the end of line, is this patch display issue or coding issue? Regards Ley Foon
> > From: Ang, Chee Hong <chee.hong.ang at intel.com> > > Sent: Friday, July 10, 2020 8:55 PM > > To: u-boot at lists.denx.de > > Cc: Marek Vasut <marex at denx.de>; Simon Goldschmidt > > <simon.k.r.goldschmidt at gmail.com>; See, Chin Liang > > <chin.liang.see at intel.com>; Tan, Ley Foon <ley.foon.tan at intel.com>; > > Ang, Chee Hong <chee.hong.ang at intel.com> > > Subject: [PATCH v1 3/4] clk: agilex: Handle clock configuration > > differently in SPL and U-Boot proper > > > > Since warm reset may optionally set the CLock Manager to'boot mode', > > the clock driver should always force the Agilex's Clock Manager to 'boot > mode' > > before the clock driver start configuring the Clock Manager in SPL. > > In SSBL, clock driver will skip the Clock Manager configuration if > > it's already being setup by SPL (Clock Manager NOT in 'boot > > mode') to prevent any inaccurate clocking issues happened on HPS > > peripherals such as UART, MAC and etc. > > > > Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com> > > --- > > drivers/clk/altera/clk-agilex.c | 10 ++++++++++ > > 1 file changed, 10 insertions(+) > > > > diff --git a/drivers/clk/altera/clk-agilex.c > > b/drivers/clk/altera/clk-agilex.c index b5cf187364..c83eb2efb9 100644 > > --- a/drivers/clk/altera/clk-agilex.c > > +++ b/drivers/clk/altera/clk-agilex.c > > @@ -171,6 +171,16 @@ static void clk_basic_init(struct udevice *dev, > > if (!cfg) > > return; > > > > +#ifdef CONFIG_SPL_BUILD > > + /* Always force clock manager into boot mode before any > > configuration */ > > + clk_write_ctrl(plat, > > + CM_REG_READL(plat, CLKMGR_CTRL) | > > CLKMGR_CTRL_BOOTMODE); #else > "#else" is at the end of line, is this patch display issue or coding issue? Only happen in display. Code is fine. > > > Regards > Ley Foon
diff --git a/drivers/clk/altera/clk-agilex.c b/drivers/clk/altera/clk-agilex.c index b5cf187364..c83eb2efb9 100644 --- a/drivers/clk/altera/clk-agilex.c +++ b/drivers/clk/altera/clk-agilex.c @@ -171,6 +171,16 @@ static void clk_basic_init(struct udevice *dev, if (!cfg) return; +#ifdef CONFIG_SPL_BUILD + /* Always force clock manager into boot mode before any configuration */ + clk_write_ctrl(plat, + CM_REG_READL(plat, CLKMGR_CTRL) | CLKMGR_CTRL_BOOTMODE); +#else + /* Skip clock configuration in SSBL if it's not in boot mode */ + if (!(CM_REG_READL(plat, CLKMGR_CTRL) & CLKMGR_CTRL_BOOTMODE)) + return; +#endif + /* Put both PLLs in bypass */ clk_write_bypass_mainpll(plat, CLKMGR_BYPASS_MAINPLL_ALL); clk_write_bypass_perpll(plat, CLKMGR_BYPASS_PERPLL_ALL);
Since warm reset may optionally set the CLock Manager to'boot mode', the clock driver should always force the Agilex's Clock Manager to 'boot mode' before the clock driver start configuring the Clock Manager in SPL. In SSBL, clock driver will skip the Clock Manager configuration if it's already being setup by SPL (Clock Manager NOT in 'boot mode') to prevent any inaccurate clocking issues happened on HPS peripherals such as UART, MAC and etc. Signed-off-by: Chee Hong Ang <chee.hong.ang at intel.com> --- drivers/clk/altera/clk-agilex.c | 10 ++++++++++ 1 file changed, 10 insertions(+)