diff mbox series

[02/10] ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN to 2MB

Message ID 20200709060820.121087-2-yamada.masahiro@socionext.com
State Accepted
Commit e3e9d5e8d7d7041157873a4242261cc01e74fdbb
Headers show
Series [01/10] Revert "ARM: uniphier: add weird workaround code for LD20" | expand

Commit Message

Masahiro Yamada July 9, 2020, 6:08 a.m. UTC
I increased the maximum U-Boot proper size from time to time, but
configs/uniphier_v7_defconfig hit the current limit 832KB.

Some historical info:

In the initial support, the max size was 512MB.

Commit 58d702274c09 ("ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN")
increased it to 576KB, and commit 3ce5b1a8d86d ("ARM: uniphier: move
SPL stack address") moved the SPL stack location to avoid the memory
map conflict. It was the solution to increase the size without changing
the NOR boot image map.

commit 1a4bd3a095b2 ("ARM: uniphier: increase CONFIG_SYS_MONITOR_LEN
again") ended up with increasing the max size again, breaking the NOR
boot image map. The limit was set to 832KB, otherwise the SPL stack
would overwrite the U-Boot proper image:
 CONFIG_SPL_STACK - CONFIG_SYS_UBOOT_BASE + sizeof(struct image_header) = 0xd0000

To increase CONFIG_SYS_MONITOR_LEN even more, the SPL stack must be
moved somewhere. I put it back to the original location prior to
commit 3ce5b1a8d86d.

With this change, there is no more practical size limit.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 include/configs/uniphier.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 55fa85ed62..2e1204fc86 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -53,7 +53,7 @@ 
 
 #define CONFIG_SYS_MAX_FLASH_SECT	256
 #define CONFIG_SYS_MONITOR_BASE		0
-#define CONFIG_SYS_MONITOR_LEN		0x000d0000	/* 832KB */
+#define CONFIG_SYS_MONITOR_LEN		0x00200000	/* 2MB */
 #define CONFIG_SYS_FLASH_BASE		0
 
 /*
@@ -221,7 +221,7 @@ 
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_TEXT_BASE)
 
 /* only for SPL */
-#define CONFIG_SPL_STACK		(0x00200000)
+#define CONFIG_SPL_STACK		(0x00100000)
 
 #define CONFIG_SYS_NAND_U_BOOT_OFFS		0x20000