diff mbox series

[v2,3/7] ARM: dts: rockchip: Sync v5.7-rc1 Radxa Dalang Carrier

Message ID 20200708100528.419035-4-jagan@amarulasolutions.com
State Superseded
Headers show
Series rockchip: Add RockPI N8/N10 support | expand

Commit Message

Jagan Teki July 8, 2020, 10:05 a.m. UTC 
Carrier board often referred as baseboard. For making
complete SBC or any other industrial boards, these
carrier boards will be used with associated SOMs.

Radxa has Dalang carrier board which supports on-board
peripherals, ports like USB-2.0, USB-3.0, HDMI, MIPI DSI/CSI,
eDP, Ethernet, WiFi, PCIe, USB-C, 40-Pin GPIO header and etc.

Right now Dalang carrier board is used with two SBC-variants:
Rock Pi N10 => VMARC RK3399Por SOM + Dalang carrier board
Rock Pi N8  => VMARC RK3288 SOM + Dalang carrier board(+codec)

So add this carrier board dtsi as a separate file in
ARM directory, so-that the same can reuse it in both
rk3288, rk3399pro variants of Rockchip SOMs.

Sync this dtsi from linux-next v5.7-rc1.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
---
 .../dts/rockchip-radxa-dalang-carrier.dtsi    | 81 +++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
diff mbox series

Patch

diff --git a/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
new file mode 100644
index 0000000000..df3712aedf
--- /dev/null
+++ b/arch/arm/dts/rockchip-radxa-dalang-carrier.dtsi
@@ -0,0 +1,81 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2019 Radxa Limited
+ * Copyright (c) 2019 Amarula Solutions(India)
+ */
+
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+};
+
+&gmac {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	i2c-scl-rising-time-ns = <140>;
+	i2c-scl-falling-time-ns = <30>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	hym8563: hym8563 at 51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "hym8563";
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	vqmmc-supply = <&vccio_sd>;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&pinctrl {
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins =
+				<4 RK_PD6 0 &pcfg_pull_up>;
+		};
+	};
+};