@@ -12,3 +12,6 @@ config TI_K3_NAVSS_UDMA
help
Support for UDMA used in K3 devices.
endif
+
+config TI_K3_PSIL
+ bool
@@ -1,3 +1,7 @@
# SPDX-License-Identifier: GPL-2.0+
obj-$(CONFIG_TI_K3_NAVSS_UDMA) += k3-udma.o
+obj-$(CONFIG_TI_K3_PSIL) += k3-psil-data.o
+k3-psil-data-y += k3-psil.o
+k3-psil-data-$(CONFIG_SOC_K3_AM6) += k3-psil-am654.o
+k3-psil-data-$(CONFIG_SOC_K3_J721E) += k3-psil-j721e.o
new file mode 100644
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi at ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_ETHERNET(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+static struct psil_ep am654_src_ep_map[] = {
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0x4100),
+ PSIL_ETHERNET(0x4101),
+ PSIL_ETHERNET(0x4102),
+ PSIL_ETHERNET(0x4103),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0x4200),
+ PSIL_ETHERNET(0x4201),
+ PSIL_ETHERNET(0x4202),
+ PSIL_ETHERNET(0x4203),
+ /* PRU_ICSSG2 */
+ PSIL_ETHERNET(0x4300),
+ PSIL_ETHERNET(0x4301),
+ PSIL_ETHERNET(0x4302),
+ PSIL_ETHERNET(0x4303),
+ /* CPSW0 */
+ PSIL_ETHERNET(0x7000),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+static struct psil_ep am654_dst_ep_map[] = {
+ /* PRU_ICSSG0 */
+ PSIL_ETHERNET(0xc100),
+ PSIL_ETHERNET(0xc101),
+ PSIL_ETHERNET(0xc102),
+ PSIL_ETHERNET(0xc103),
+ PSIL_ETHERNET(0xc104),
+ PSIL_ETHERNET(0xc105),
+ PSIL_ETHERNET(0xc106),
+ PSIL_ETHERNET(0xc107),
+ /* PRU_ICSSG1 */
+ PSIL_ETHERNET(0xc200),
+ PSIL_ETHERNET(0xc201),
+ PSIL_ETHERNET(0xc202),
+ PSIL_ETHERNET(0xc203),
+ PSIL_ETHERNET(0xc204),
+ PSIL_ETHERNET(0xc205),
+ PSIL_ETHERNET(0xc206),
+ PSIL_ETHERNET(0xc207),
+ /* PRU_ICSSG2 */
+ PSIL_ETHERNET(0xc300),
+ PSIL_ETHERNET(0xc301),
+ PSIL_ETHERNET(0xc302),
+ PSIL_ETHERNET(0xc303),
+ PSIL_ETHERNET(0xc304),
+ PSIL_ETHERNET(0xc305),
+ PSIL_ETHERNET(0xc306),
+ PSIL_ETHERNET(0xc307),
+ /* CPSW0 */
+ PSIL_ETHERNET(0xf000),
+ PSIL_ETHERNET(0xf001),
+ PSIL_ETHERNET(0xf002),
+ PSIL_ETHERNET(0xf003),
+ PSIL_ETHERNET(0xf004),
+ PSIL_ETHERNET(0xf005),
+ PSIL_ETHERNET(0xf006),
+ PSIL_ETHERNET(0xf007),
+};
+
+struct psil_ep_map am654_ep_map = {
+ .name = "am654",
+ .src = am654_src_ep_map,
+ .src_count = ARRAY_SIZE(am654_src_ep_map),
+ .dst = am654_dst_ep_map,
+ .dst_count = ARRAY_SIZE(am654_dst_ep_map),
+};
new file mode 100644
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi at ti.com>
+ */
+
+#include <linux/kernel.h>
+
+#include "k3-psil-priv.h"
+
+#define PSIL_ETHERNET(x) \
+ { \
+ .thread_id = x, \
+ .ep_config = { \
+ .ep_type = PSIL_EP_NATIVE, \
+ .pkt_mode = 1, \
+ .needs_epib = 1, \
+ .psd_size = 16, \
+ }, \
+ }
+
+/* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
+static struct psil_ep j721e_src_ep_map[] = {
+ /* CPSW0 */
+ PSIL_ETHERNET(0x7000),
+};
+
+/* PSI-L destination thread IDs, used for TX (DMA_MEM_TO_DEV) */
+static struct psil_ep j721e_dst_ep_map[] = {
+ /* CPSW0 */
+ PSIL_ETHERNET(0xf000),
+ PSIL_ETHERNET(0xf001),
+ PSIL_ETHERNET(0xf002),
+ PSIL_ETHERNET(0xf003),
+ PSIL_ETHERNET(0xf004),
+ PSIL_ETHERNET(0xf005),
+ PSIL_ETHERNET(0xf006),
+ PSIL_ETHERNET(0xf007),
+};
+
+struct psil_ep_map j721e_ep_map = {
+ .name = "j721e",
+ .src = j721e_src_ep_map,
+ .src_count = ARRAY_SIZE(j721e_src_ep_map),
+ .dst = j721e_dst_ep_map,
+ .dst_count = ARRAY_SIZE(j721e_dst_ep_map),
+};
new file mode 100644
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_PRIV_H_
+#define K3_PSIL_PRIV_H_
+
+#include "k3-psil.h"
+
+struct psil_ep {
+ u32 thread_id;
+ struct psil_endpoint_config ep_config;
+};
+
+/**
+ * struct psil_ep_map - PSI-L thread ID configuration maps
+ * @name: Name of the map, set it to the name of the SoC
+ * @src: Array of source PSI-L thread configurations
+ * @src_count: Number of entries in the src array
+ * @dst: Array of destination PSI-L thread configurations
+ * @dst_count: Number of entries in the dst array
+ *
+ * In case of symmetric configuration for a matching src/dst thread (for example
+ * 0x4400 and 0xc400) only the src configuration can be present. If no dst
+ * configuration found the code will look for (dst_thread_id & ~0x8000) to find
+ * the symmetric match.
+ */
+struct psil_ep_map {
+ char *name;
+ struct psil_ep *src;
+ int src_count;
+ struct psil_ep *dst;
+ int dst_count;
+};
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id);
+
+/* SoC PSI-L endpoint maps */
+extern struct psil_ep_map am654_ep_map;
+extern struct psil_ep_map j721e_ep_map;
+
+#endif /* K3_PSIL_PRIV_H_ */
new file mode 100644
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Peter Ujfalusi <peter.ujfalusi at ti.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+
+#include "k3-psil-priv.h"
+
+static const struct psil_ep_map *soc_ep_map;
+
+struct psil_endpoint_config *psil_get_ep_config(u32 thread_id)
+{
+ int i;
+
+ if (!soc_ep_map) {
+ if (IS_ENABLED(CONFIG_SOC_K3_AM6))
+ soc_ep_map = &am654_ep_map;
+ else if (IS_ENABLED(CONFIG_SOC_K3_J721E))
+ soc_ep_map = &j721e_ep_map;
+ }
+
+ if (thread_id & K3_PSIL_DST_THREAD_ID_OFFSET && soc_ep_map->dst) {
+ /* check in destination thread map */
+ for (i = 0; i < soc_ep_map->dst_count; i++) {
+ if (soc_ep_map->dst[i].thread_id == thread_id)
+ return &soc_ep_map->dst[i].ep_config;
+ }
+ }
+
+ thread_id &= ~K3_PSIL_DST_THREAD_ID_OFFSET;
+ if (soc_ep_map->src) {
+ for (i = 0; i < soc_ep_map->src_count; i++) {
+ if (soc_ep_map->src[i].thread_id == thread_id)
+ return &soc_ep_map->src[i].ep_config;
+ }
+ }
+
+ return ERR_PTR(-ENOENT);
+}
new file mode 100644
@@ -0,0 +1,67 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com
+ */
+
+#ifndef K3_PSIL_H_
+#define K3_PSIL_H_
+
+#include <linux/types.h>
+
+#define K3_PSIL_DST_THREAD_ID_OFFSET 0x8000
+
+struct device;
+
+/**
+ * enum udma_tp_level - Channel Throughput Levels
+ * @UDMA_TP_NORMAL: Normal channel
+ * @UDMA_TP_HIGH: High Throughput channel
+ * @UDMA_TP_ULTRAHIGH: Ultra High Throughput channel
+ */
+enum udma_tp_level {
+ UDMA_TP_NORMAL = 0,
+ UDMA_TP_HIGH,
+ UDMA_TP_ULTRAHIGH,
+ UDMA_TP_LAST,
+};
+
+/**
+ * enum psil_endpoint_type - PSI-L Endpoint type
+ * @PSIL_EP_NATIVE: Normal channel
+ * @PSIL_EP_PDMA_XY: XY mode PDMA
+ * @PSIL_EP_PDMA_MCAN: MCAN mode PDMA
+ * @PSIL_EP_PDMA_AASRC: AASRC mode PDMA
+ */
+enum psil_endpoint_type {
+ PSIL_EP_NATIVE = 0,
+ PSIL_EP_PDMA_XY,
+ PSIL_EP_PDMA_MCAN,
+ PSIL_EP_PDMA_AASRC,
+};
+
+/**
+ * struct psil_endpoint_config - PSI-L Endpoint configuration
+ * @ep_type: PSI-L endpoint type
+ * @pkt_mode: If set, the channel must be in Packet mode, otherwise in
+ * TR mode
+ * @notdpkt: TDCM must be suppressed on the TX channel
+ * @needs_epib: Endpoint needs EPIB
+ * @psd_size: If set, PSdata is used by the endpoint
+ * @channel_tpl: Desired throughput level for the channel
+ * @pdma_acc32: ACC32 must be enabled on the PDMA side
+ * @pdma_burst: BURST must be enabled on the PDMA side
+ */
+struct psil_endpoint_config {
+ enum psil_endpoint_type ep_type;
+
+ unsigned pkt_mode:1;
+ unsigned notdpkt:1;
+ unsigned needs_epib:1;
+ u32 psd_size;
+ enum udma_tp_level channel_tpl;
+
+ /* PDMA properties, valid for PSIL_EP_PDMA_* */
+ unsigned pdma_acc32:1;
+ unsigned pdma_burst:1;
+};
+#endif /* K3_PSIL_H_ */