@@ -6,6 +6,20 @@
*/
&cbass_mcu {
+ mcu_conf: scm_conf at 40f00000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0x0 0x40f00000 0x0 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x40f00000 0x20000>;
+
+ phy_gmii_sel: phy at 4040 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x4040 0x4>;
+ #phy-cells = <1>;
+ };
+ };
+
mcu_uart0: serial at 40a00000 {
compatible = "ti,am654-uart";
reg = <0x00 0x40a00000 0x00 0x100>;
@@ -146,4 +160,74 @@
ti,sci-rm-range-rflow = <0x5>; /* GP RFLOW */
};
};
+
+ mcu_cpsw: ethernet at 46000000 {
+ compatible = "ti,am654-cpsw-nuss";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0x46000000 0x0 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x0 0x0 0x0 0x46000000 0x0 0x200000>;
+ dma-coherent;
+ clocks = <&k3_clks 5 10>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&mcu_udmap 0xf000>,
+ <&mcu_udmap 0xf001>,
+ <&mcu_udmap 0xf002>,
+ <&mcu_udmap 0xf003>,
+ <&mcu_udmap 0xf004>,
+ <&mcu_udmap 0xf005>,
+ <&mcu_udmap 0xf006>,
+ <&mcu_udmap 0xf007>,
+ <&mcu_udmap 0x7000>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpsw_port1: port at 1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ ti,syscon-efuse = <&mcu_conf 0x200>;
+ phys = <&phy_gmii_sel 1>;
+ };
+ };
+
+ davinci_mdio: mdio at f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x0 0xf00 0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 5 10>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ };
+
+ cpts at 3d000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x0 0x3d000 0x0 0x400>;
+ clocks = <&mcu_cpsw_cpts_mux>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 570 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+
+ mcu_cpsw_cpts_mux: refclk-mux {
+ #clock-cells = <0>;
+ clocks = <&k3_clks 118 5>, <&k3_clks 118 11>,
+ <&k3_clks 118 6>, <&k3_clks 118 3>,
+ <&k3_clks 118 8>, <&k3_clks 118 14>,
+ <&k3_clks 120 3>, <&k3_clks 121 3>;
+ assigned-clocks = <&mcu_cpsw_cpts_mux>;
+ assigned-clock-parents = <&k3_clks 118 5>;
+ };
+ };
+ };
};
@@ -57,59 +57,6 @@
u-boot,dm-spl;
};
};
-
- mcu_conf: scm_conf at 40f00000 {
- compatible = "syscon";
- reg = <0x0 0x40f00000 0x0 0x20000>;
- };
-
- mcu_cpsw: cpsw_nuss at 046000000 {
- compatible = "ti,am654-cpsw-nuss";
- #address-cells = <2>;
- #size-cells = <2>;
- reg = <0x0 0x46000000 0x0 0x200000>;
- reg-names = "cpsw_nuss";
- ranges;
- dma-coherent;
- clocks = <&k3_clks 5 10>;
- clock-names = "fck";
- power-domains = <&k3_pds 5 TI_SCI_PD_EXCLUSIVE>;
-
- dmas = <&mcu_udmap 0xf000>,
- <&mcu_udmap 0xf001>,
- <&mcu_udmap 0xf002>,
- <&mcu_udmap 0xf003>,
- <&mcu_udmap 0xf004>,
- <&mcu_udmap 0xf005>,
- <&mcu_udmap 0xf006>,
- <&mcu_udmap 0xf007>,
- <&mcu_udmap 0x7000>;
- dma-names = "tx0", "tx1", "tx2", "tx3",
- "tx4", "tx5", "tx6", "tx7",
- "rx";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
- host: host at 0 {
- reg = <0>;
- ti,label = "host";
- };
-
- cpsw_port1: port at 1 {
- reg = <1>;
- ti,mac-only;
- ti,label = "port1";
- ti,syscon-efuse = <&mcu_conf 0x200>;
- };
- };
-
- davinci_mdio: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
- bus_freq = <1000000>;
- };
- };
};
&cbass_wakeup {
@@ -271,6 +218,7 @@
reg = <0x0 0x46000000 0x0 0x200000>,
<0x0 0x40f00200 0x0 0x2>;
reg-names = "cpsw_nuss", "mac_efuse";
+ /delete-property/ ranges;
cpsw-phy-sel at 40f04040 {
compatible = "ti,am654-cpsw-phy-sel";
Sync CPSW DT node from kernel and move it out of -u-boot.dtsi file. Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com> --- arch/arm/dts/k3-am65-mcu.dtsi | 84 ++++++++++++++++++++ arch/arm/dts/k3-am654-base-board-u-boot.dtsi | 54 +------------ 2 files changed, 85 insertions(+), 53 deletions(-)