| Message ID | 20200701144310.25481-3-narmstrong@baylibre.com |
|---|---|
| State | Accepted |
| Commit | 8888d837731d876f2685ff408edabd7fef83a2c5 |
| Headers | show |
| Series | board: amlogic: add Odroid C4 support | expand |
Hi Neil, On Wed, 1 Jul 2020 at 20:13, Neil Armstrong <narmstrong at baylibre.com> wrote: > > From: Christian Hewitt <christianshewitt at gmail.com> > > Odroid C4 is an Amlogic SM1 device, the board config and board documentation > are adapted from the Odroid-N2 support from the same vendor. > > Signed-off-by: Christian Hewitt <christianshewitt at gmail.com> > Signed-off-by: Neil Armstrong <narmstrong at baylibre.com> > --- Please add my Tested-by: Anand Moon <linux.amoon at gmail.com> > arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi | 7 + > board/amlogic/odroid-n2/MAINTAINERS | 2 + > configs/odroid-c4_defconfig | 62 +++++++++ > doc/board/amlogic/index.rst | 3 +- > doc/board/amlogic/odroid-c4.rst | 133 +++++++++++++++++++ > 5 files changed, 206 insertions(+), 1 deletion(-) > create mode 100644 arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi > create mode 100644 configs/odroid-c4_defconfig > create mode 100644 doc/board/amlogic/odroid-c4.rst > > diff --git a/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi > new file mode 100644 > index 0000000000..ee32c6f43d > --- /dev/null > +++ b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi > @@ -0,0 +1,7 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2020 BayLibre, SAS > + * Author: Neil Armstrong <narmstrong at baylibre.com> > + */ > + > +#include "meson-g12-common-u-boot.dtsi" > diff --git a/board/amlogic/odroid-n2/MAINTAINERS b/board/amlogic/odroid-n2/MAINTAINERS > index 5627e54058..77f7746346 100644 > --- a/board/amlogic/odroid-n2/MAINTAINERS > +++ b/board/amlogic/odroid-n2/MAINTAINERS > @@ -4,4 +4,6 @@ S: Maintained > L: u-boot-amlogic at groups.io > F: board/amlogic/odroid-n2/ > F: configs/odroid-n2_defconfig > +F: configs/odroid-c4_defconfig > F: doc/board/amlogic/odroid-n2.rst > +F: doc/board/amlogic/odroid-c4.rst > diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig > new file mode 100644 > index 0000000000..db9271916e > --- /dev/null > +++ b/configs/odroid-c4_defconfig > @@ -0,0 +1,62 @@ > +CONFIG_ARM=y > +CONFIG_SYS_BOARD="odroid-n2" > +CONFIG_ARCH_MESON=y > +CONFIG_SYS_TEXT_BASE=0x01000000 > +CONFIG_ENV_SIZE=0x2000 > +CONFIG_DM_GPIO=y > +CONFIG_MESON_G12A=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_DEBUG_UART_BASE=0xff803000 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_IDENT_STRING=" odroid-c4" > +CONFIG_DEBUG_UART=y > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_MISC_INIT_R=y > +# CONFIG_DISPLAY_CPUINFO is not set > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_IMI is not set > +CONFIG_CMD_GPIO=y > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_USB_MASS_STORAGE=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_REGULATOR=y > +CONFIG_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-c4" > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_DM_MMC=y > +CONFIG_MMC_MESON_GX=y > +CONFIG_PHY_REALTEK=y > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_MESON_G12A_USB_PHY=y > +CONFIG_PINCTRL=y > +CONFIG_PINCTRL_MESON_G12A=y > +CONFIG_POWER_DOMAIN=y > +CONFIG_MESON_EE_POWER_DOMAIN=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_RESET=y > +CONFIG_DEBUG_UART_MESON=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_SKIP_INIT=y > +CONFIG_MESON_SERIAL=y > +CONFIG_USB=y > +CONFIG_DM_USB=y > +CONFIG_USB_XHCI_HCD=y > +CONFIG_USB_XHCI_DWC3=y > +CONFIG_USB_DWC3=y > +# CONFIG_USB_DWC3_GADGET is not set > +CONFIG_USB_DWC3_MESON_G12A=y > +CONFIG_USB_GADGET=y > +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e > +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada > +CONFIG_USB_GADGET_DWC2_OTG=y > +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y > +CONFIG_USB_GADGET_DOWNLOAD=y > +CONFIG_DM_VIDEO=y > +CONFIG_VIDEO_MESON=y > +CONFIG_VIDEO_DT_SIMPLEFB=y > +CONFIG_OF_LIBFDT_OVERLAY=y > diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst > index 3730419167..0e2f8c9aad 100644 > --- a/doc/board/amlogic/index.rst > +++ b/doc/board/amlogic/index.rst > @@ -17,7 +17,7 @@ This matrix concerns the actual source code version. > +===============================+===========+==============+==============+============+============+=============+==============+ > | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | > | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | > -| | P200 | LibreTech-CC | | | | | | > +| | P200 | LibreTech-CC | | | | | Odroid-C4 | > | | P201 | LibreTech-AC | | | | | | > +-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ > | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | > @@ -83,6 +83,7 @@ Board Documentation > libretech-cc > nanopi-k2 > odroid-c2 > + odroid-c4 > odroid-n2 > p200 > p201 > diff --git a/doc/board/amlogic/odroid-c4.rst b/doc/board/amlogic/odroid-c4.rst > new file mode 100644 > index 0000000000..4327d1913f > --- /dev/null > +++ b/doc/board/amlogic/odroid-c4.rst > @@ -0,0 +1,133 @@ > +.. SPDX-License-Identifier: GPL-2.0+ > + > +U-Boot for ODROID-C4 > +==================== > + > +ODROID-N2 is a single board computer manufactured by Hardkernel > +Co. Ltd with the following specifications: > + > + - Amlogic S905X3 Arm Cortex-A55 quad-core SoC > + - 2GB or 4GB LPDDR4 SDRAM > + - Gigabit Ethernet > + - HDMI 2.1 display > + - 40-pin GPIO header > + - 7-pin GPIO expansion header > + - 4x USB 3.0 Host > + - 1x USB 2.0 Host/OTG (micro) > + - eMMC, microSD > + - UART serial > + - Infrared receiver > + > +Schematics are available on the manufacturer website. > + > +U-Boot compilation > +------------------ > + > + $ export CROSS_COMPILE=aarch64-none-elf- > + $ make odroid-c4_defconfig > + $ make > + > +Image creation > +-------------- > + > +Amlogic doesn't provide sources for the firmware and for tools needed > +to create the bootloader image, so it is necessary to obtain them from > +the git tree published by the board vendor: > + > +.. code-block:: bash > + > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz > + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz > + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH > + > + $ DIR=odroid-c4 > + $ git clone --depth 1 \ > + https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 \ > + $DIR > + > + $ cd odroid-c4 > + $ make odroidc4_defconfig > + $ make > + $ export UBOOTDIR=$PWD > + > + Go back to mainline U-Boot source tree then : > + > +.. code-block:: bash > + > + $ mkdir fip > + > + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh > + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ > + $ cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/ > + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ > + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ > + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ > + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ > + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ > + $ cp u-boot.bin fip/bl33.bin > + > + $ sh fip/blx_fix.sh \ > + fip/bl30.bin \ > + fip/zero_tmp \ > + fip/bl30_zero.bin \ > + fip/bl301.bin \ > + fip/bl301_zero.bin \ > + fip/bl30_new.bin \ > + bl30 > + > + $ sh fip/blx_fix.sh \ > + fip/bl2.bin \ > + fip/zero_tmp \ > + fip/bl2_zero.bin \ > + fip/acs.bin \ > + fip/bl21_zero.bin \ > + fip/bl2_new.bin \ > + bl2 > + > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ > + --output fip/bl30_new.bin.g12a.enc \ > + --level v3 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ > + --output fip/bl30_new.bin.enc \ > + --level v3 --type bl30 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ > + --output fip/bl31.img.enc \ > + --level v3 --type bl31 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ > + --output fip/bl33.bin.enc \ > + --level v3 --type bl33 --compress lz4 > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ > + --output fip/bl2.n.bin.sig > + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ > + --output fip/u-boot.bin \ > + --bl2 fip/bl2.n.bin.sig \ > + --bl30 fip/bl30_new.bin.enc \ > + --bl31 fip/bl31.img.enc \ > + --bl33 fip/bl33.bin.enc \ > + --ddrfw1 fip/ddr4_1d.fw \ > + --ddrfw2 fip/ddr4_2d.fw \ > + --ddrfw3 fip/ddr3_1d.fw \ > + --ddrfw4 fip/piei.fw \ > + --ddrfw5 fip/lpddr4_1d.fw \ > + --ddrfw6 fip/lpddr4_2d.fw \ > + --ddrfw7 fip/diag_lpddr4.fw \ > + --ddrfw8 fip/aml_ddr.fw \ > + --ddrfw9 fip/lpddr3_1d.fw \ > + --level v3 > + > +and then write the image to SD with: > + > +.. code-block:: bash > + > + $ DEV=/dev/your_sd_device > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 > + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444 > -- > 2.22.0 >
diff --git a/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi new file mode 100644 index 0000000000..ee32c6f43d --- /dev/null +++ b/arch/arm/dts/meson-sm1-odroid-c4-u-boot.dtsi @@ -0,0 +1,7 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 BayLibre, SAS + * Author: Neil Armstrong <narmstrong at baylibre.com> + */ + +#include "meson-g12-common-u-boot.dtsi" diff --git a/board/amlogic/odroid-n2/MAINTAINERS b/board/amlogic/odroid-n2/MAINTAINERS index 5627e54058..77f7746346 100644 --- a/board/amlogic/odroid-n2/MAINTAINERS +++ b/board/amlogic/odroid-n2/MAINTAINERS @@ -4,4 +4,6 @@ S: Maintained L: u-boot-amlogic at groups.io F: board/amlogic/odroid-n2/ F: configs/odroid-n2_defconfig +F: configs/odroid-c4_defconfig F: doc/board/amlogic/odroid-n2.rst +F: doc/board/amlogic/odroid-c4.rst diff --git a/configs/odroid-c4_defconfig b/configs/odroid-c4_defconfig new file mode 100644 index 0000000000..db9271916e --- /dev/null +++ b/configs/odroid-c4_defconfig @@ -0,0 +1,62 @@ +CONFIG_ARM=y +CONFIG_SYS_BOARD="odroid-n2" +CONFIG_ARCH_MESON=y +CONFIG_SYS_TEXT_BASE=0x01000000 +CONFIG_ENV_SIZE=0x2000 +CONFIG_DM_GPIO=y +CONFIG_MESON_G12A=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEBUG_UART_BASE=0xff803000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_IDENT_STRING=" odroid-c4" +CONFIG_DEBUG_UART=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_MISC_INIT_R=y +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_USB=y +CONFIG_CMD_USB_MASS_STORAGE=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_REGULATOR=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="meson-sm1-odroid-c4" +CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM_MMC=y +CONFIG_MMC_MESON_GX=y +CONFIG_PHY_REALTEK=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_MESON_G12A_USB_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_G12A=y +CONFIG_POWER_DOMAIN=y +CONFIG_MESON_EE_POWER_DOMAIN=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_RESET=y +CONFIG_DEBUG_UART_MESON=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_DWC3=y +# CONFIG_USB_DWC3_GADGET is not set +CONFIG_USB_DWC3_MESON_G12A=y +CONFIG_USB_GADGET=y +CONFIG_USB_GADGET_VENDOR_NUM=0x1b8e +CONFIG_USB_GADGET_PRODUCT_NUM=0xfada +CONFIG_USB_GADGET_DWC2_OTG=y +CONFIG_USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8=y +CONFIG_USB_GADGET_DOWNLOAD=y +CONFIG_DM_VIDEO=y +CONFIG_VIDEO_MESON=y +CONFIG_VIDEO_DT_SIMPLEFB=y +CONFIG_OF_LIBFDT_OVERLAY=y diff --git a/doc/board/amlogic/index.rst b/doc/board/amlogic/index.rst index 3730419167..0e2f8c9aad 100644 --- a/doc/board/amlogic/index.rst +++ b/doc/board/amlogic/index.rst @@ -17,7 +17,7 @@ This matrix concerns the actual source code version. +===============================+===========+==============+==============+============+============+=============+==============+ | Boards | Odroid-C2 | P212 | Khadas VIM2 | S400 | U200 | Odroid-N2 | SEI610 | | | Nanopi-K2 | Khadas-VIM | Libretech-PC | | SEI510 | Khadas-VIM3 | Khadas-VIM3L | -| | P200 | LibreTech-CC | | | | | | +| | P200 | LibreTech-CC | | | | | Odroid-C4 | | | P201 | LibreTech-AC | | | | | | +-------------------------------+-----------+--------------+--------------+------------+------------+-------------+--------------+ | UART | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | **Yes** | @@ -83,6 +83,7 @@ Board Documentation libretech-cc nanopi-k2 odroid-c2 + odroid-c4 odroid-n2 p200 p201 diff --git a/doc/board/amlogic/odroid-c4.rst b/doc/board/amlogic/odroid-c4.rst new file mode 100644 index 0000000000..4327d1913f --- /dev/null +++ b/doc/board/amlogic/odroid-c4.rst @@ -0,0 +1,133 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +U-Boot for ODROID-C4 +==================== + +ODROID-N2 is a single board computer manufactured by Hardkernel +Co. Ltd with the following specifications: + + - Amlogic S905X3 Arm Cortex-A55 quad-core SoC + - 2GB or 4GB LPDDR4 SDRAM + - Gigabit Ethernet + - HDMI 2.1 display + - 40-pin GPIO header + - 7-pin GPIO expansion header + - 4x USB 3.0 Host + - 1x USB 2.0 Host/OTG (micro) + - eMMC, microSD + - UART serial + - Infrared receiver + +Schematics are available on the manufacturer website. + +U-Boot compilation +------------------ + + $ export CROSS_COMPILE=aarch64-none-elf- + $ make odroid-c4_defconfig + $ make + +Image creation +-------------- + +Amlogic doesn't provide sources for the firmware and for tools needed +to create the bootloader image, so it is necessary to obtain them from +the git tree published by the board vendor: + +.. code-block:: bash + + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz + $ tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz + $ export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH + + $ DIR=odroid-c4 + $ git clone --depth 1 \ + https://github.com/hardkernel/u-boot.git -b odroidg12-v2015.01 \ + $DIR + + $ cd odroid-c4 + $ make odroidc4_defconfig + $ make + $ export UBOOTDIR=$PWD + + Go back to mainline U-Boot source tree then : + +.. code-block:: bash + + $ mkdir fip + + $ wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh + $ cp $UBOOTDIR/build/scp_task/bl301.bin fip/ + $ cp $UBOOTDIR/build/board/hardkernel/odroidc4/firmware/acs.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl2.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl30.bin fip/ + $ cp $UBOOTDIR/fip/g12a/bl31.img fip/ + $ cp $UBOOTDIR/fip/g12a/ddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/ddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/diag_lpddr4.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr3_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_1d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/lpddr4_2d.fw fip/ + $ cp $UBOOTDIR/fip/g12a/piei.fw fip/ + $ cp $UBOOTDIR/fip/g12a/aml_ddr.fw fip/ + $ cp u-boot.bin fip/bl33.bin + + $ sh fip/blx_fix.sh \ + fip/bl30.bin \ + fip/zero_tmp \ + fip/bl30_zero.bin \ + fip/bl301.bin \ + fip/bl301_zero.bin \ + fip/bl30_new.bin \ + bl30 + + $ sh fip/blx_fix.sh \ + fip/bl2.bin \ + fip/zero_tmp \ + fip/bl2_zero.bin \ + fip/acs.bin \ + fip/bl21_zero.bin \ + fip/bl2_new.bin \ + bl2 + + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl30sig --input fip/bl30_new.bin \ + --output fip/bl30_new.bin.g12a.enc \ + --level v3 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl30_new.bin.g12a.enc \ + --output fip/bl30_new.bin.enc \ + --level v3 --type bl30 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl31.img \ + --output fip/bl31.img.enc \ + --level v3 --type bl31 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl3sig --input fip/bl33.bin --compress lz4 \ + --output fip/bl33.bin.enc \ + --level v3 --type bl33 --compress lz4 + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bl2sig --input fip/bl2_new.bin \ + --output fip/bl2.n.bin.sig + $ $UBOOTDIR/fip/g12a/aml_encrypt_g12a --bootmk \ + --output fip/u-boot.bin \ + --bl2 fip/bl2.n.bin.sig \ + --bl30 fip/bl30_new.bin.enc \ + --bl31 fip/bl31.img.enc \ + --bl33 fip/bl33.bin.enc \ + --ddrfw1 fip/ddr4_1d.fw \ + --ddrfw2 fip/ddr4_2d.fw \ + --ddrfw3 fip/ddr3_1d.fw \ + --ddrfw4 fip/piei.fw \ + --ddrfw5 fip/lpddr4_1d.fw \ + --ddrfw6 fip/lpddr4_2d.fw \ + --ddrfw7 fip/diag_lpddr4.fw \ + --ddrfw8 fip/aml_ddr.fw \ + --ddrfw9 fip/lpddr3_1d.fw \ + --level v3 + +and then write the image to SD with: + +.. code-block:: bash + + $ DEV=/dev/your_sd_device + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1 + $ dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444