@@ -59,6 +59,14 @@ config BCM6345_GPIO
help
This driver supports the GPIO banks on BCM6345 SoCs.
+config CORTINA_GPIO
+ bool "Cortina-Access GPIO driver"
+ depends on DM_GPIO && CORTINA_PLATFORM
+ help
+ Enable support for the GPIO controller in Cortina CAxxxx SoCs.
+ This driver supports all CPU ISA variants supported by Cortina
+ Access CAxxxx SoCs.
+
config DWAPB_GPIO
bool "DWAPB GPIO driver"
depends on DM && DM_GPIO
@@ -17,6 +17,7 @@ endif
obj-$(CONFIG_AT91_GPIO) += at91_gpio.o
obj-$(CONFIG_ATMEL_PIO4) += atmel_pio4.o
obj-$(CONFIG_BCM6345_GPIO) += bcm6345_gpio.o
+obj-$(CONFIG_CORTINA_GPIO) += cortina_gpio.o
obj-$(CONFIG_INTEL_GPIO) += intel_gpio.o
obj-$(CONFIG_INTEL_ICH6_GPIO) += intel_ich6_gpio.o
obj-$(CONFIG_INTEL_BROADWELL_GPIO) += intel_broadwell_gpio.o
new file mode 100644
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020 Cortina-Access
+ *
+ * GPIO Driver for Cortina Access CAxxxx Line of SoCs
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <linux/compat.h>
+#include <linux/compiler.h>
+
+/* GPIO Register Map */
+#define CORTINA_GPIO_CFG 0x00
+#define CORTINA_GPIO_OUT 0x04
+#define CORTINA_GPIO_IN 0x08
+#define CORTINA_GPIO_LVL 0x0C
+#define CORTINA_GPIO_EDGE 0x10
+#define CORTINA_GPIO_BOTHEDGE 0x14
+#define CORTINA_GPIO_IE 0x18
+#define CORTINA_GPIO_INT 0x1C
+#define CORTINA_GPIO_STAT 0x20
+
+struct cortina_gpio_bank {
+ void __iomem *base;
+};
+
+#ifdef CONFIG_DM_GPIO
+static int ca_gpio_direction_input(struct udevice *dev, unsigned int offset)
+{
+ struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+ setbits_32(priv->base, BIT(offset));
+ return 0;
+}
+
+static int
+ca_gpio_direction_output(struct udevice *dev, unsigned int offset, int value)
+{
+ struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+ clrbits_32(priv->base, BIT(offset));
+ return 0;
+}
+
+static int ca_gpio_get_value(struct udevice *dev, unsigned int offset)
+{
+ struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+ return readl(priv->base + CORTINA_GPIO_IN) & BIT(offset);
+}
+
+static int ca_gpio_set_value(struct udevice *dev, unsigned int offset,
+ int value)
+{
+ struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+ setbits_32(priv->base + CORTINA_GPIO_OUT, BIT(offset));
+ return 0;
+}
+
+static int ca_gpio_get_function(struct udevice *dev, unsigned int offset)
+{
+ struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+ if (readl(priv->base) & BIT(offset))
+ return GPIOF_INPUT;
+ else
+ return GPIOF_OUTPUT;
+}
+
+static const struct dm_gpio_ops gpio_cortina_ops = {
+ .direction_input = ca_gpio_direction_input,
+ .direction_output = ca_gpio_direction_output,
+ .get_value = ca_gpio_get_value,
+ .set_value = ca_gpio_set_value,
+ .get_function = ca_gpio_get_function,
+};
+
+static int ca_gpio_probe(struct udevice *dev)
+{
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct cortina_gpio_bank *priv = dev_get_priv(dev);
+
+ priv->base = dev_remap_addr_index(dev, 0);
+ if (!priv->base)
+ return -EINVAL;
+
+ uc_priv->gpio_count = dev_read_u32_default(dev, "ngpios", 32);
+ uc_priv->bank_name = dev->name;
+
+ debug("Done Cortina GPIO init\n");
+ return 0;
+}
+
+static const struct udevice_id ca_gpio_ids[] = {
+ {.compatible = "cortina,ca-gpio"},
+ {}
+};
+
+U_BOOT_DRIVER(cortina_gpio) = {
+ .name = "cortina-gpio",
+ .id = UCLASS_GPIO,
+ .ops = &gpio_cortina_ops,
+ .probe = ca_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct cortina_gpio_bank),
+ .of_match = ca_gpio_ids,
+};
+#endif /* CONFIG_DM_GPIO */