[v2] mx6sxsabresd: Keep only one target

diff --git a/board/freescale/mx6sxsabresd/MAINTAINERS b/board/freescale/mx6sxsabresd/MAINTAINERS
index 1dcec67545..a56d252edb 100644
--- a/board/freescale/mx6sxsabresd/MAINTAINERS
+++ b/board/freescale/mx6sxsabresd/MAINTAINERS
@@ -4,4 +4,3 @@  S:	Maintained
 F:	board/freescale/mx6sxsabresd/
 F:	include/configs/mx6sxsabresd.h
 F:	configs/mx6sxsabresd_defconfig
-F:	configs/mx6sxsabresd_spl_defconfig
diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 9fff8ffc4c..4f1d6602e5 100644
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -321,239 +321,3 @@  int checkboard(void)
 
 	return 0;
 }
-
-#ifdef CONFIG_SPL_BUILD
-#include <linux/libfdt.h>
-#include <spl.h>
-#include <asm/arch/mx6-ddr.h>
-
-static struct fsl_esdhc_cfg usdhc_cfg[3] = {
-	{USDHC2_BASE_ADDR, 0, 4},
-	{USDHC3_BASE_ADDR},
-	{USDHC4_BASE_ADDR},
-};
-
-#define USDHC3_CD_GPIO	IMX_GPIO_NR(2, 10)
-#define USDHC3_PWR_GPIO	IMX_GPIO_NR(2, 11)
-#define USDHC4_CD_GPIO	IMX_GPIO_NR(6, 21)
-
-static iomux_v3_cfg_t const usdhc2_pads[] = {
-	MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DATA0__USDHC2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DATA1__USDHC2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DATA2__USDHC2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD2_DATA3__USDHC2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usdhc3_pads[] = {
-	MX6_PAD_SD3_CLK__USDHC3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_CMD__USDHC3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA0__USDHC3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA1__USDHC3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA2__USDHC3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA3__USDHC3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA4__USDHC3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA5__USDHC3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA6__USDHC3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD3_DATA7__USDHC3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-
-	/* CD pin */
-	MX6_PAD_KEY_COL0__GPIO2_IO_10 | MUX_PAD_CTRL(NO_PAD_CTRL),
-
-	/* RST_B, used for power reset cycle */
-	MX6_PAD_KEY_COL1__GPIO2_IO_11 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-static iomux_v3_cfg_t const usdhc4_pads[] = {
-	MX6_PAD_SD4_CLK__USDHC4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_CMD__USDHC4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DATA0__USDHC4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DATA1__USDHC4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DATA2__USDHC4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DATA3__USDHC4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
-	MX6_PAD_SD4_DATA7__GPIO6_IO_21 | MUX_PAD_CTRL(NO_PAD_CTRL),
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	struct src *src_regs = (struct src *)SRC_BASE_ADDR;
-	u32 val;
-	u32 port;
-
-	val = readl(&src_regs->sbmr1);
-
-	if ((val & 0xc0) != 0x40) {
-		printf("Not boot from USDHC!\n");
-		return -EINVAL;
-	}
-
-	port = (val >> 11) & 0x3;
-	printf("port %d\n", port);
-	switch (port) {
-	case 1:
-		imx_iomux_v3_setup_multiple_pads(
-			usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
-		usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
-		usdhc_cfg[0].esdhc_base = USDHC2_BASE_ADDR;
-		break;
-	case 2:
-		imx_iomux_v3_setup_multiple_pads(
-			usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
-		gpio_direction_input(USDHC3_CD_GPIO);
-		gpio_direction_output(USDHC3_PWR_GPIO, 1);
-		usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
-		usdhc_cfg[0].esdhc_base = USDHC3_BASE_ADDR;
-		break;
-	case 3:
-		imx_iomux_v3_setup_multiple_pads(
-			usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
-		gpio_direction_input(USDHC4_CD_GPIO);
-		usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
-		usdhc_cfg[0].esdhc_base = USDHC4_BASE_ADDR;
-		break;
-	}
-
-	gd->arch.sdhc_clk = usdhc_cfg[0].sdhc_clk;
-	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
-}
-
-int board_mmc_getcd(struct mmc *mmc)
-{
-	struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
-	int ret = 0;
-
-	switch (cfg->esdhc_base) {
-	case USDHC2_BASE_ADDR:
-		ret = 1; /* Assume uSDHC2 is always present */
-		break;
-	case USDHC3_BASE_ADDR:
-		ret = !gpio_get_value(USDHC3_CD_GPIO);
-		break;
-	case USDHC4_BASE_ADDR:
-		ret = !gpio_get_value(USDHC4_CD_GPIO);
-		break;
-	}
-
-	return ret;
-}
-
-const struct mx6sx_iomux_ddr_regs mx6_ddr_ioregs = {
-	.dram_dqm0 = 0x00000028,
-	.dram_dqm1 = 0x00000028,
-	.dram_dqm2 = 0x00000028,
-	.dram_dqm3 = 0x00000028,
-	.dram_ras = 0x00000020,
-	.dram_cas = 0x00000020,
-	.dram_odt0 = 0x00000020,
-	.dram_odt1 = 0x00000020,
-	.dram_sdba2 = 0x00000000,
-	.dram_sdcke0 = 0x00003000,
-	.dram_sdcke1 = 0x00003000,
-	.dram_sdclk_0 = 0x00000030,
-	.dram_sdqs0 = 0x00000028,
-	.dram_sdqs1 = 0x00000028,
-	.dram_sdqs2 = 0x00000028,
-	.dram_sdqs3 = 0x00000028,
-	.dram_reset = 0x00000020,
-};
-
-const struct mx6sx_iomux_grp_regs mx6_grp_ioregs = {
-	.grp_addds = 0x00000020,
-	.grp_ddrmode_ctl = 0x00020000,
-	.grp_ddrpke = 0x00000000,
-	.grp_ddrmode = 0x00020000,
-	.grp_b0ds = 0x00000028,
-	.grp_b1ds = 0x00000028,
-	.grp_ctlds = 0x00000020,
-	.grp_ddr_type = 0x000c0000,
-	.grp_b2ds = 0x00000028,
-	.grp_b3ds = 0x00000028,
-};
-
-const struct mx6_mmdc_calibration mx6_mmcd_calib = {
-	.p0_mpwldectrl0 = 0x00290025,
-	.p0_mpwldectrl1 = 0x00220022,
-	.p0_mpdgctrl0 = 0x41480144,
-	.p0_mpdgctrl1 = 0x01340130,
-	.p0_mprddlctl = 0x3C3E4244,
-	.p0_mpwrdlctl = 0x34363638,
-};
-
-static struct mx6_ddr3_cfg mem_ddr = {
-	.mem_speed = 1600,
-	.density = 4,
-	.width = 32,
-	.banks = 8,
-	.rowaddr = 15,
-	.coladdr = 10,
-	.pagesz = 2,
-	.trcd = 1375,
-	.trcmin = 4875,
-	.trasmin = 3500,
-};
-
-static void ccgr_init(void)
-{
-	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
-
-	writel(0xFFFFFFFF, &ccm->CCGR0);
-	writel(0xFFFFFFFF, &ccm->CCGR1);
-	writel(0xFFFFFFFF, &ccm->CCGR2);
-	writel(0xFFFFFFFF, &ccm->CCGR3);
-	writel(0xFFFFFFFF, &ccm->CCGR4);
-	writel(0xFFFFFFFF, &ccm->CCGR5);
-	writel(0xFFFFFFFF, &ccm->CCGR6);
-	writel(0xFFFFFFFF, &ccm->CCGR7);
-}
-
-static void spl_dram_init(void)
-{
-	struct mx6_ddr_sysinfo sysinfo = {
-		.dsize = mem_ddr.width/32,
-		.cs_density = 24,
-		.ncs = 1,
-		.cs1_mirror = 0,
-		.rtt_wr = 2,
-		.rtt_nom = 2,		/* RTT_Nom = RZQ/2 */
-		.walat = 1,		/* Write additional latency */
-		.ralat = 5,		/* Read additional latency */
-		.mif3_mode = 3,		/* Command prediction working mode */
-		.bi_on = 1,		/* Bank interleaving enabled */
-		.sde_to_rst = 0x10,	/* 14 cycles, 200us (JEDEC default) */
-		.rst_to_cke = 0x23,	/* 33 cycles, 500us (JEDEC default) */
-		.ddr_type = DDR_TYPE_DDR3,
-		.refsel = 1,	/* Refresh cycles at 32KHz */
-		.refr = 7,	/* 8 refresh commands per refresh cycle */
-	};
-
-	mx6sx_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
-	mx6_dram_cfg(&sysinfo, &mx6_mmcd_calib, &mem_ddr);
-}
-
-void board_init_f(ulong dummy)
-{
-	/* setup AIPS and disable watchdog */
-	arch_cpu_init();
-
-	ccgr_init();
-
-	/* iomux and setup of i2c */
-	board_early_init_f();
-
-	/* setup GP timer */
-	timer_init();
-
-	/* UART clocks enabled and gd valid - init serial console */
-	preloader_console_init();
-
-	/* DDR initialization */
-	spl_dram_init();
-
-	/* Clear the BSS. */
-	memset(__bss_start, 0, __bss_end - __bss_start);
-
-	/* load/boot image from boot device */
-	board_init_r(NULL, 0);
-}
-#endif