@@ -22,6 +22,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_AVB_VERIFY=y
+CONFIG_ANDROID_AB=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA=y
@@ -31,11 +33,14 @@ CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ABOOTIMG=y
CONFIG_CMD_SPL=y
CONFIG_CMD_BCB=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_AB_SELECT=y
# CONFIG_CMD_PMIC is not set
+CONFIG_CMD_AVB=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="am572x-idk"
@@ -102,3 +107,4 @@ CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_LIBAVB=y
@@ -27,6 +27,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_AVB_VERIFY=y
+CONFIG_ANDROID_AB=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA=y
@@ -34,10 +36,13 @@ CONFIG_SPL_DMA=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x40000
CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ABOOTIMG=y
CONFIG_CMD_BCB=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_AB_SELECT=y
# CONFIG_CMD_PMIC is not set
+CONFIG_CMD_AVB=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
@@ -98,3 +103,4 @@ CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_LIBAVB=y
@@ -28,6 +28,8 @@ CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_VERSION_VARIABLE=y
CONFIG_BOARD_EARLY_INIT_F=y
+CONFIG_AVB_VERIFY=y
+CONFIG_ANDROID_AB=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SPL_DMA=y
@@ -39,10 +41,13 @@ CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_DFU=y
CONFIG_SPL_YMODEM_SUPPORT=y
CONFIG_CMD_ADTIMG=y
+CONFIG_CMD_ABOOTIMG=y
CONFIG_CMD_BCB=y
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_AB_SELECT=y
# CONFIG_CMD_PMIC is not set
+CONFIG_CMD_AVB=y
CONFIG_OF_CONTROL=y
CONFIG_SPL_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
@@ -105,3 +110,4 @@ CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
+CONFIG_LIBAVB=y
Enable Android commands that will be needed for Android 10 boot flow implementation, for all AM57x variants. Commands enabled: 1. 'abootimg': - CONFIG_CMD_ABOOTIMG=y 2. 'ab_select': - CONFIG_ANDROID_AB=y - CONFIG_CMD_AB_SELECT=y 3. 'avb': - CONFIG_LIBAVB=y - CONFIG_AVB_VERIFY=y - CONFIG_CMD_AVB=y While at it, resync defconfig files with "make savedefconfig". Signed-off-by: Sam Protsenko <joe.skb7 at gmail.com> --- configs/am57xx_evm_defconfig | 6 ++++++ configs/am57xx_hs_evm_defconfig | 6 ++++++ configs/am57xx_hs_evm_usb_defconfig | 6 ++++++ 3 files changed, 18 insertions(+)