diff mbox series

rockchip: px30: sync the main px30 dtsi from mainline

Message ID 20200122093143.41323-1-heiko@sntech.de
State New
Headers show
Series rockchip: px30: sync the main px30 dtsi from mainline | expand

Commit Message

Heiko Stübner Jan. 22, 2020, 9:31 a.m. UTC
From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>

There have been multiple peripherals added to the main px30 dtsi
in the Linux kernel since its addition to u-boot. So to make it easier
to sync board devicetrees, update the core dtsi from Linux.

Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
---
 arch/arm/dts/px30.dtsi | 182 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 171 insertions(+), 11 deletions(-)

Comments

Kever Yang Jan. 30, 2020, 3:54 a.m. UTC | #1
On 2020/1/22 下午5:31, Heiko Stuebner wrote:
> From: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
>
> There have been multiple peripherals added to the main px30 dtsi
> in the Linux kernel since its addition to u-boot. So to make it easier
> to sync board devicetrees, update the core dtsi from Linux.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner at theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   arch/arm/dts/px30.dtsi | 182 ++++++++++++++++++++++++++++++++++++++---
>   1 file changed, 171 insertions(+), 11 deletions(-)
>
> diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
> index 0d2325a77f..b6c79e7ed3 100644
> --- a/arch/arm/dts/px30.dtsi
> +++ b/arch/arm/dts/px30.dtsi
> @@ -10,6 +10,7 @@
>   #include <dt-bindings/pinctrl/rockchip.h>
>   #include <dt-bindings/power/px30-power.h>
>   #include <dt-bindings/soc/rockchip,boot-mode.h>
> +#include <dt-bindings/thermal/thermal.h>
>   
>   / {
>   	compatible = "rockchip,px30";
> @@ -113,16 +114,11 @@
>   		compatible = "operating-points-v2";
>   		opp-shared;
>   
> -		opp-408000000 {
> -			opp-hz = /bits/ 64 <408000000>;
> -			opp-microvolt = <950000 950000 1350000>;
> -			clock-latency-ns = <40000>;
> -			opp-suspend;
> -		};
>   		opp-600000000 {
>   			opp-hz = /bits/ 64 <600000000>;
>   			opp-microvolt = <950000 950000 1350000>;
>   			clock-latency-ns = <40000>;
> +			opp-suspend;
>   		};
>   		opp-816000000 {
>   			opp-hz = /bits/ 64 <816000000>;
> @@ -186,6 +182,55 @@
>   			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
>   	};
>   
> +	thermal_zones: thermal-zones {
> +		soc_thermal: soc-thermal {
> +			polling-delay-passive = <20>;
> +			polling-delay = <1000>;
> +			sustainable-power = <750>;
> +			thermal-sensors = <&tsadc 0>;
> +
> +			trips {
> +				threshold: trip-point-0 {
> +					temperature = <70000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				target: trip-point-1 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				soc_crit: soc-crit {
> +					temperature = <115000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};
> +
> +			cooling-maps {
> +				map0 {
> +					trip = <&target>;
> +					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					contribution = <4096>;
> +				};
> +
> +				map1 {
> +					trip = <&target>;
> +					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +					contribution = <4096>;
> +				};
> +			};
> +		};
> +
> +		gpu_thermal: gpu-thermal {
> +			polling-delay-passive = <100>; /* milliseconds */
> +			polling-delay = <1000>; /* milliseconds */
> +			thermal-sensors = <&tsadc 1>;
> +		};
> +	};
> +
>   	xin24m: xin24m {
>   		compatible = "fixed-clock";
>   		#clock-cells = <0>;
> @@ -370,6 +415,36 @@
>   			compatible = "rockchip,px30-io-voltage-domain";
>   			status = "disabled";
>   		};
> +
> +		lvds: lvds {
> +			compatible = "rockchip,px30-lvds";
> +			phys = <&dsi_dphy>;
> +			phy-names = "dphy";
> +			rockchip,grf = <&grf>;
> +			rockchip,output = "lvds";
> +			status = "disabled";
> +
> +			ports {
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +
> +				port at 0 {
> +					reg = <0>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					lvds_vopb_in: endpoint at 0 {
> +						reg = <0>;
> +						remote-endpoint = <&vopb_out_lvds>;
> +					};
> +
> +					lvds_vopl_in: endpoint at 1 {
> +						reg = <1>;
> +						remote-endpoint = <&vopl_out_lvds>;
> +					};
> +				};
> +			};
> +		};
>   	};
>   
>   	uart1: serial at ff158000 {
> @@ -650,6 +725,26 @@
>   		};
>   	};
>   
> +	tsadc: tsadc at ff280000 {
> +		compatible = "rockchip,px30-tsadc";
> +		reg = <0x0 0xff280000 0x0 0x100>;
> +		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> +		assigned-clocks = <&cru SCLK_TSADC>;
> +		assigned-clock-rates = <50000>;
> +		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
> +		clock-names = "tsadc", "apb_pclk";
> +		resets = <&cru SRST_TSADC>;
> +		reset-names = "tsadc-apb";
> +		rockchip,grf = <&grf>;
> +		rockchip,hw-tshut-temp = <120000>;
> +		pinctrl-names = "init", "default", "sleep";
> +		pinctrl-0 = <&tsadc_otp_gpio>;
> +		pinctrl-1 = <&tsadc_otp_out>;
> +		pinctrl-2 = <&tsadc_otp_gpio>;
> +		#thermal-sensor-cells = <1>;
> +		status = "disabled";
> +	};
> +
>   	saradc: saradc at ff288000 {
>   		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
>   		reg = <0x0 0xff288000 0x0 0x100>;
> @@ -706,12 +801,48 @@
>   		#reset-cells = <1>;
>   	};
>   
> +	usb2phy_grf: syscon at ff2c0000 {
> +		compatible = "rockchip,px30-usb2phy-grf", "syscon",
> +			     "simple-mfd";
> +		reg = <0x0 0xff2c0000 0x0 0x10000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +
> +		u2phy: usb2-phy at 100 {
> +			compatible = "rockchip,px30-usb2phy";
> +			reg = <0x100 0x20>;
> +			clocks = <&pmucru SCLK_USBPHY_REF>;
> +			clock-names = "phyclk";
> +			#clock-cells = <0>;
> +			assigned-clocks = <&cru USB480M>;
> +			assigned-clock-parents = <&u2phy>;
> +			clock-output-names = "usb480m_phy";
> +			status = "disabled";
> +
> +			u2phy_host: host-port {
> +				#phy-cells = <0>;
> +				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "linestate";
> +				status = "disabled";
> +			};
> +
> +			u2phy_otg: otg-port {
> +				#phy-cells = <0>;
> +				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +					     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "otg-bvalid", "otg-id",
> +						  "linestate";
> +				status = "disabled";
> +			};
> +		};
> +	};
> +
>   	dsi_dphy: phy at ff2e0000 {
>   		compatible = "rockchip,px30-dsi-dphy";
>   		reg = <0x0 0xff2e0000 0x0 0x10000>;
>   		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
>   		clock-names = "ref", "pclk";
> -		#clock-cells = <0>;
>   		resets = <&cru SRST_MIPIDSIPHY_P>;
>   		reset-names = "apb";
>   		#phy-cells = <0>;
> @@ -731,6 +862,8 @@
>   		g-rx-fifo-size = <280>;
>   		g-tx-fifo-size = <256 128 128 64 32 16>;
>   		g-use-dma;
> +		phys = <&u2phy_otg>;
> +		phy-names = "usb2-phy";
>   		power-domains = <&power PX30_PD_USB>;
>   		status = "disabled";
>   	};
> @@ -741,6 +874,8 @@
>   		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
>   		clocks = <&cru HCLK_HOST>;
>   		clock-names = "usbhost";
> +		phys = <&u2phy_host>;
> +		phy-names = "usb";
>   		power-domains = <&power PX30_PD_USB>;
>   		status = "disabled";
>   	};
> @@ -751,6 +886,8 @@
>   		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
>   		clocks = <&cru HCLK_HOST>;
>   		clock-names = "usbhost";
> +		phys = <&u2phy_host>;
> +		phy-names = "usb";
>   		power-domains = <&power PX30_PD_USB>;
>   		status = "disabled";
>   	};
> @@ -823,17 +960,30 @@
>   		status = "disabled";
>   	};
>   
> +	gpu: gpu at ff400000 {
> +		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
> +		reg = <0x0 0xff400000 0x0 0x4000>;
> +		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-names = "job", "mmu", "gpu";
> +		clocks = <&cru SCLK_GPU>;
> +		#cooling-cells = <2>;
> +		power-domains = <&power PX30_PD_GPU>;
> +		status = "disabled";
> +	};
> +
>   	dsi: dsi at ff450000 {
>   		compatible = "rockchip,px30-mipi-dsi";
>   		reg = <0x0 0xff450000 0x0 0x10000>;
>   		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
> -		clocks = <&cru PCLK_MIPI_DSI>, <&dsi_dphy>;
> -		clock-names = "pclk", "pll";
> -		resets = <&cru SRST_MIPIDSI_HOST_P>;
> -		reset-names = "apb";
> +		clocks = <&cru PCLK_MIPI_DSI>;
> +		clock-names = "pclk";
>   		phys = <&dsi_dphy>;
>   		phy-names = "dphy";
>   		power-domains = <&power PX30_PD_VO>;
> +		resets = <&cru SRST_MIPIDSI_HOST_P>;
> +		reset-names = "apb";
>   		rockchip,grf = <&grf>;
>   		#address-cells = <1>;
>   		#size-cells = <0>;
> @@ -883,6 +1033,11 @@
>   				reg = <0>;
>   				remote-endpoint = <&dsi_in_vopb>;
>   			};
> +
> +			vopb_out_lvds: endpoint at 1 {
> +				reg = <1>;
> +				remote-endpoint = <&lvds_vopb_in>;
> +			};
>   		};
>   	};
>   
> @@ -920,6 +1075,11 @@
>   				reg = <0>;
>   				remote-endpoint = <&dsi_in_vopl>;
>   			};
> +
> +			vopl_out_lvds: endpoint at 1 {
> +				reg = <1>;
> +				remote-endpoint = <&lvds_vopl_in>;
> +			};
>   		};
>   	};
>
diff mbox series

Patch

diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi
index 0d2325a77f..b6c79e7ed3 100644
--- a/arch/arm/dts/px30.dtsi
+++ b/arch/arm/dts/px30.dtsi
@@ -10,6 +10,7 @@ 
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/power/px30-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,px30";
@@ -113,16 +114,11 @@ 
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-408000000 {
-			opp-hz = /bits/ 64 <408000000>;
-			opp-microvolt = <950000 950000 1350000>;
-			clock-latency-ns = <40000>;
-			opp-suspend;
-		};
 		opp-600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <950000 950000 1350000>;
 			clock-latency-ns = <40000>;
+			opp-suspend;
 		};
 		opp-816000000 {
 			opp-hz = /bits/ 64 <816000000>;
@@ -186,6 +182,55 @@ 
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 	};
 
+	thermal_zones: thermal-zones {
+		soc_thermal: soc-thermal {
+			polling-delay-passive = <20>;
+			polling-delay = <1000>;
+			sustainable-power = <750>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				threshold: trip-point-0 {
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point-1 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				soc_crit: soc-crit {
+					temperature = <115000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&tsadc 1>;
+		};
+	};
+
 	xin24m: xin24m {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
@@ -370,6 +415,36 @@ 
 			compatible = "rockchip,px30-io-voltage-domain";
 			status = "disabled";
 		};
+
+		lvds: lvds {
+			compatible = "rockchip,px30-lvds";
+			phys = <&dsi_dphy>;
+			phy-names = "dphy";
+			rockchip,grf = <&grf>;
+			rockchip,output = "lvds";
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port at 0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					lvds_vopb_in: endpoint at 0 {
+						reg = <0>;
+						remote-endpoint = <&vopb_out_lvds>;
+					};
+
+					lvds_vopl_in: endpoint at 1 {
+						reg = <1>;
+						remote-endpoint = <&vopl_out_lvds>;
+					};
+				};
+			};
+		};
 	};
 
 	uart1: serial at ff158000 {
@@ -650,6 +725,26 @@ 
 		};
 	};
 
+	tsadc: tsadc at ff280000 {
+		compatible = "rockchip,px30-tsadc";
+		reg = <0x0 0xff280000 0x0 0x100>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+		assigned-clocks = <&cru SCLK_TSADC>;
+		assigned-clock-rates = <50000>;
+		clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+		clock-names = "tsadc", "apb_pclk";
+		resets = <&cru SRST_TSADC>;
+		reset-names = "tsadc-apb";
+		rockchip,grf = <&grf>;
+		rockchip,hw-tshut-temp = <120000>;
+		pinctrl-names = "init", "default", "sleep";
+		pinctrl-0 = <&tsadc_otp_gpio>;
+		pinctrl-1 = <&tsadc_otp_out>;
+		pinctrl-2 = <&tsadc_otp_gpio>;
+		#thermal-sensor-cells = <1>;
+		status = "disabled";
+	};
+
 	saradc: saradc at ff288000 {
 		compatible = "rockchip,px30-saradc", "rockchip,rk3399-saradc";
 		reg = <0x0 0xff288000 0x0 0x100>;
@@ -706,12 +801,48 @@ 
 		#reset-cells = <1>;
 	};
 
+	usb2phy_grf: syscon at ff2c0000 {
+		compatible = "rockchip,px30-usb2phy-grf", "syscon",
+			     "simple-mfd";
+		reg = <0x0 0xff2c0000 0x0 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		u2phy: usb2-phy at 100 {
+			compatible = "rockchip,px30-usb2phy";
+			reg = <0x100 0x20>;
+			clocks = <&pmucru SCLK_USBPHY_REF>;
+			clock-names = "phyclk";
+			#clock-cells = <0>;
+			assigned-clocks = <&cru USB480M>;
+			assigned-clock-parents = <&u2phy>;
+			clock-output-names = "usb480m_phy";
+			status = "disabled";
+
+			u2phy_host: host-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "linestate";
+				status = "disabled";
+			};
+
+			u2phy_otg: otg-port {
+				#phy-cells = <0>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "otg-bvalid", "otg-id",
+						  "linestate";
+				status = "disabled";
+			};
+		};
+	};
+
 	dsi_dphy: phy at ff2e0000 {
 		compatible = "rockchip,px30-dsi-dphy";
 		reg = <0x0 0xff2e0000 0x0 0x10000>;
 		clocks = <&pmucru SCLK_MIPIDSIPHY_REF>, <&cru PCLK_MIPIDSIPHY>;
 		clock-names = "ref", "pclk";
-		#clock-cells = <0>;
 		resets = <&cru SRST_MIPIDSIPHY_P>;
 		reset-names = "apb";
 		#phy-cells = <0>;
@@ -731,6 +862,8 @@ 
 		g-rx-fifo-size = <280>;
 		g-tx-fifo-size = <256 128 128 64 32 16>;
 		g-use-dma;
+		phys = <&u2phy_otg>;
+		phy-names = "usb2-phy";
 		power-domains = <&power PX30_PD_USB>;
 		status = "disabled";
 	};
@@ -741,6 +874,8 @@ 
 		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
 		clock-names = "usbhost";
+		phys = <&u2phy_host>;
+		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;
 		status = "disabled";
 	};
@@ -751,6 +886,8 @@ 
 		interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_HOST>;
 		clock-names = "usbhost";
+		phys = <&u2phy_host>;
+		phy-names = "usb";
 		power-domains = <&power PX30_PD_USB>;
 		status = "disabled";
 	};
@@ -823,17 +960,30 @@ 
 		status = "disabled";
 	};
 
+	gpu: gpu at ff400000 {
+		compatible = "rockchip,px30-mali", "arm,mali-bifrost";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "job", "mmu", "gpu";
+		clocks = <&cru SCLK_GPU>;
+		#cooling-cells = <2>;
+		power-domains = <&power PX30_PD_GPU>;
+		status = "disabled";
+	};
+
 	dsi: dsi at ff450000 {
 		compatible = "rockchip,px30-mipi-dsi";
 		reg = <0x0 0xff450000 0x0 0x10000>;
 		interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru PCLK_MIPI_DSI>, <&dsi_dphy>;
-		clock-names = "pclk", "pll";
-		resets = <&cru SRST_MIPIDSI_HOST_P>;
-		reset-names = "apb";
+		clocks = <&cru PCLK_MIPI_DSI>;
+		clock-names = "pclk";
 		phys = <&dsi_dphy>;
 		phy-names = "dphy";
 		power-domains = <&power PX30_PD_VO>;
+		resets = <&cru SRST_MIPIDSI_HOST_P>;
+		reset-names = "apb";
 		rockchip,grf = <&grf>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -883,6 +1033,11 @@ 
 				reg = <0>;
 				remote-endpoint = <&dsi_in_vopb>;
 			};
+
+			vopb_out_lvds: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopb_in>;
+			};
 		};
 	};
 
@@ -920,6 +1075,11 @@ 
 				reg = <0>;
 				remote-endpoint = <&dsi_in_vopl>;
 			};
+
+			vopl_out_lvds: endpoint at 1 {
+				reg = <1>;
+				remote-endpoint = <&lvds_vopl_in>;
+			};
 		};
 	};