| Message ID | 20200117124616.24695-8-pragnesh.patel@sifive.com |
|---|---|
| State | New |
| Headers | show |
| Series | RISC-V SiFive FU540 support SPL | expand |
On Fri, Jan 17, 2020 at 6:18 PM Pragnesh Patel <pragnesh.patel at sifive.com> wrote: > > Add header files needed for U-boot SPL > > Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> First of all, PATCH7 and PATCH8 does not make sense. Instead of PATCH7 and PATCH8, we should have following patch breakup: 1. A PATCH for adding ddrregs.c,required headers and required Makefile/Kconfig changes 2. A PATCH for adding spl.c, required headers and required Makefile/Kconfig changes 3. A PATCH for SPL defconfig By "required headers", I mean the headers by this patch only. > --- > board/sifive/fu540/ccache.h | 43 + > board/sifive/fu540/fu540-memory-map.h | 59 ++ > board/sifive/fu540/regconfig-ctl.h | 274 ++++++ > board/sifive/fu540/regconfig-phy.h | 1224 +++++++++++++++++++++++++ > board/sifive/fu540/ux00ddr.h | 276 ++++++ > board/sifive/fu540/ux00prci.h | 69 ++ > 6 files changed, 1945 insertions(+) > create mode 100644 board/sifive/fu540/ccache.h > create mode 100644 board/sifive/fu540/fu540-memory-map.h > create mode 100644 board/sifive/fu540/regconfig-ctl.h > create mode 100644 board/sifive/fu540/regconfig-phy.h > create mode 100644 board/sifive/fu540/ux00ddr.h > create mode 100644 board/sifive/fu540/ux00prci.h > > diff --git a/board/sifive/fu540/ccache.h b/board/sifive/fu540/ccache.h > new file mode 100644 > index 0000000000..0e5e40a1ef > --- /dev/null > +++ b/board/sifive/fu540/ccache.h > @@ -0,0 +1,43 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2019 SiFive, Inc > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + * Troy Benjegerdes <troy.benjegerdes at sifive.com> > + */ > + > +#ifndef FU540_CCACHE_H > +#define FU540_CCACHE_H > + > +#include <asm/arch/cache.h> > + > +#ifndef __ASSEMBLER__ > + > +#include <stdint.h> > +#include <linux/types.h> > + > +/* Block memory access until operation completed */ > +static inline void ccache_barrier_0(void) > +{ > + asm volatile("fence rw, io" : : : "memory"); > +} > + > +static inline void ccache_barrier_1(void) > +{ > + asm volatile("fence io, rw" : : : "memory"); > +} > + > +/* Enable ways; allow cache to use these ways */ > +static inline void ccache_enable_ways(u64 base_addr, u8 value) > +{ > + volatile u32 *enable = (volatile u32 *)(base_addr + > + CCACHE_ENABLE); > + ccache_barrier_0(); > + (*enable) = value; > + ccache_barrier_1(); > +} > + > +#endif > + > +#endif /* FU540_CCACHE_H */ > diff --git a/board/sifive/fu540/fu540-memory-map.h b/board/sifive/fu540/fu540-memory-map.h > new file mode 100644 > index 0000000000..c0df07d6fd > --- /dev/null > +++ b/board/sifive/fu540/fu540-memory-map.h > @@ -0,0 +1,59 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2019 SiFive, Inc > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + * Troy Benjegerdes <troy.benjegerdes at sifive.com> > + */ > + > +#ifndef FU540_MEMORY_MAP > +#define FU540_MEMORY_MAP > + > +#include <linux/const.h> > +#include <asm/arch/gpio.h> > +#include <asm/arch/uart.h> > +#include "ccache.h" > +#include "i2c.h" > +#include "spi.h" > +#include "ux00prci.h" Remove unused includes > + > +/**************************************************************************** > + * Platform definitions > + *****************************************************************************/ > + > +/* Memory map */ > +#define CCACHE_CTRL_ADDR _AC(0x2010000, UL) > +#define CCACHE_CTRL_SIZE _AC(0x1000, UL) > + > +#define GPIO_CTRL_ADDR _AC(0x10060000, UL) > +#define GPIO_CTRL_SIZE _AC(0x1000, UL) GPIO_xyz defines are not used anywhere remove it. > + > +#define PHYSICAL_FILTER_CTRL_ADDR _AC(0x100b8000, UL) > +#define PHYSICAL_FILTER_CTRL_SIZE _AC(0x1000, UL) > + > +#define UART0_CTRL_ADDR _AC(0x10010000, UL) > +#define UART0_CTRL_SIZE _AC(0x1000, UL) > +#define UART1_CTRL_ADDR _AC(0x10011000, UL) > +#define UART1_CTRL_SIZE _AC(0x1000, UL) > +#ifndef UART_CTRL_ADDR > +#define UART_CTRL_ADDR UART0_CTRL_ADDR > +#endif > +#ifndef UART_CTRL_SIZE > +#define UART_CTRL_SIZE UART0_CTRL_SIZE > +#endif These UARTx_<xyz> defines can be removed if we can get rid of UART clock scaling from init_clk_and_ddr(). The rationale is that UART driver of U-Boot is supposed to set correct divider values based on current clk setting so we don't need to do UART clock scaling in init_clk_and_ddr() > +#define UX00DDR_CTRL_ADDR _AC(0x100b0000, UL) > +#define UX00DDR_CTRL_SIZE _AC(0x4000, UL) > +#define UX00PRCI_CTRL_ADDR _AC(0x10000000, UL) > +#define UX00PRCI_CTRL_SIZE _AC(0x1000, UL) > + > +/* Helper functions */ > +#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i))) > + > +#define UX00PRCI_REG(offset) \ > + _REG32(UX00PRCI_CTRL_ADDR, \ > + offset) > +#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset) > +#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset) Remove GPIO_REG() and UART0_REG() as well. > + > +#endif /* FU540_MEMORY_MAP */ > diff --git a/board/sifive/fu540/regconfig-ctl.h b/board/sifive/fu540/regconfig-ctl.h > new file mode 100644 > index 0000000000..19a52e7996 > --- /dev/null > +++ b/board/sifive/fu540/regconfig-ctl.h > @@ -0,0 +1,274 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2019 SiFive, Inc > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + * Troy Benjegerdes <troy.benjegerdes at sifive.com> > + */ > + > +#define DENALI_CTL_00_DATA 0x00000a00 > +#define DENALI_CTL_01_DATA 0x00000000 > +#define DENALI_CTL_02_DATA 0x00000000 > +#define DENALI_CTL_03_DATA 0x00000000 > +#define DENALI_CTL_04_DATA 0x00000000 > +#define DENALI_CTL_05_DATA 0x00000000 > +#define DENALI_CTL_06_DATA 0x0000000a > +#define DENALI_CTL_07_DATA 0x0002d362 > +#define DENALI_CTL_08_DATA 0x00071073 > +#define DENALI_CTL_09_DATA 0x0a1c0255 > +#define DENALI_CTL_10_DATA 0x1c1c0400 > +#define DENALI_CTL_11_DATA 0x0404990b > +#define DENALI_CTL_12_DATA 0x2b050405 > +#define DENALI_CTL_13_DATA 0x0e0c081e > +#define DENALI_CTL_14_DATA 0x08090914 > +#define DENALI_CTL_15_DATA 0x00fde718 > +#define DENALI_CTL_16_DATA 0x00180a05 > +#define DENALI_CTL_17_DATA 0x008b130e > +#define DENALI_CTL_18_DATA 0x01000118 > +#define DENALI_CTL_19_DATA 0x0e032101 > +#define DENALI_CTL_20_DATA 0x00000000 > +#define DENALI_CTL_21_DATA 0x00000101 > +#define DENALI_CTL_22_DATA 0x00000000 > +#define DENALI_CTL_23_DATA 0x0a000000 > +#define DENALI_CTL_24_DATA 0x00000000 > +#define DENALI_CTL_25_DATA 0x01450100 > +#define DENALI_CTL_26_DATA 0x00001c36 > +#define DENALI_CTL_27_DATA 0x00000005 > +#define DENALI_CTL_28_DATA 0x00170006 > +#define DENALI_CTL_29_DATA 0x014e0300 > +#define DENALI_CTL_30_DATA 0x03010000 > +#define DENALI_CTL_31_DATA 0x000a0e00 > +#define DENALI_CTL_32_DATA 0x04030200 > +#define DENALI_CTL_33_DATA 0x0000031f > +#define DENALI_CTL_34_DATA 0x00070004 > +#define DENALI_CTL_35_DATA 0x00000000 > +#define DENALI_CTL_36_DATA 0x00000000 > +#define DENALI_CTL_37_DATA 0x00000000 > +#define DENALI_CTL_38_DATA 0x00000000 > +#define DENALI_CTL_39_DATA 0x00000000 > +#define DENALI_CTL_40_DATA 0x00000000 > +#define DENALI_CTL_41_DATA 0x00000000 > +#define DENALI_CTL_42_DATA 0x00000000 > +#define DENALI_CTL_43_DATA 0x00000000 > +#define DENALI_CTL_44_DATA 0x00000000 > +#define DENALI_CTL_45_DATA 0x00000000 > +#define DENALI_CTL_46_DATA 0x00000000 > +#define DENALI_CTL_47_DATA 0x00000000 > +#define DENALI_CTL_48_DATA 0x00000000 > +#define DENALI_CTL_49_DATA 0x00000000 > +#define DENALI_CTL_50_DATA 0x00000000 > +#define DENALI_CTL_51_DATA 0x00000000 > +#define DENALI_CTL_52_DATA 0x00000000 > +#define DENALI_CTL_53_DATA 0x00000000 > +#define DENALI_CTL_54_DATA 0x00000000 > +#define DENALI_CTL_55_DATA 0x00000000 > +#define DENALI_CTL_56_DATA 0x00000000 > +#define DENALI_CTL_57_DATA 0x00000000 > +#define DENALI_CTL_58_DATA 0x00000000 > +#define DENALI_CTL_59_DATA 0x00000000 > +#define DENALI_CTL_60_DATA 0x00000424 > +#define DENALI_CTL_61_DATA 0x00000201 > +#define DENALI_CTL_62_DATA 0x00001008 > +#define DENALI_CTL_63_DATA 0x00000000 > +#define DENALI_CTL_64_DATA 0x00000200 > +#define DENALI_CTL_65_DATA 0x00000000 > +#define DENALI_CTL_66_DATA 0x00000481 > +#define DENALI_CTL_67_DATA 0x00000400 > +#define DENALI_CTL_68_DATA 0x00000424 > +#define DENALI_CTL_69_DATA 0x00000201 > +#define DENALI_CTL_70_DATA 0x00001008 > +#define DENALI_CTL_71_DATA 0x00000000 > +#define DENALI_CTL_72_DATA 0x00000200 > +#define DENALI_CTL_73_DATA 0x00000000 > +#define DENALI_CTL_74_DATA 0x00000481 > +#define DENALI_CTL_75_DATA 0x00000400 > +#define DENALI_CTL_76_DATA 0x01010000 > +#define DENALI_CTL_77_DATA 0x00000000 > +#define DENALI_CTL_78_DATA 0x00000000 > +#define DENALI_CTL_79_DATA 0x00000000 > +#define DENALI_CTL_80_DATA 0x00000000 > +#define DENALI_CTL_81_DATA 0x00000000 > +#define DENALI_CTL_82_DATA 0x00000000 > +#define DENALI_CTL_83_DATA 0x00000000 > +#define DENALI_CTL_84_DATA 0x00000000 > +#define DENALI_CTL_85_DATA 0x00000000 > +#define DENALI_CTL_86_DATA 0x00000000 > +#define DENALI_CTL_87_DATA 0x00000000 > +#define DENALI_CTL_88_DATA 0x00000000 > +#define DENALI_CTL_89_DATA 0x00000000 > +#define DENALI_CTL_90_DATA 0x00000000 > +#define DENALI_CTL_91_DATA 0x00000000 > +#define DENALI_CTL_92_DATA 0x00000000 > +#define DENALI_CTL_93_DATA 0x00000000 > +#define DENALI_CTL_94_DATA 0x00000000 > +#define DENALI_CTL_95_DATA 0x00000000 > +#define DENALI_CTL_96_DATA 0x00000000 > +#define DENALI_CTL_97_DATA 0x00000000 > +#define DENALI_CTL_98_DATA 0x00000000 > +#define DENALI_CTL_99_DATA 0x00000000 > +#define DENALI_CTL_100_DATA 0x00000000 > +#define DENALI_CTL_101_DATA 0x00000000 > +#define DENALI_CTL_102_DATA 0x00000000 > +#define DENALI_CTL_103_DATA 0x00000000 > +#define DENALI_CTL_104_DATA 0x00000000 > +#define DENALI_CTL_105_DATA 0x00000003 > +#define DENALI_CTL_106_DATA 0x00000000 > +#define DENALI_CTL_107_DATA 0x00000000 > +#define DENALI_CTL_108_DATA 0x00000000 > +#define DENALI_CTL_109_DATA 0x00000000 > +#define DENALI_CTL_110_DATA 0x01000000 > +#define DENALI_CTL_111_DATA 0x00040000 > +#define DENALI_CTL_112_DATA 0x00800200 > +#define DENALI_CTL_113_DATA 0x00000200 > +#define DENALI_CTL_114_DATA 0x00000040 > +#define DENALI_CTL_115_DATA 0x01000100 > +#define DENALI_CTL_116_DATA 0x0a000002 > +#define DENALI_CTL_117_DATA 0x0101ffff > +#define DENALI_CTL_118_DATA 0x01010101 > +#define DENALI_CTL_119_DATA 0x01010101 > +#define DENALI_CTL_120_DATA 0x0000010b > +#define DENALI_CTL_121_DATA 0x00000c01 > +#define DENALI_CTL_122_DATA 0x00000000 > +#define DENALI_CTL_123_DATA 0x00000000 > +#define DENALI_CTL_124_DATA 0x00000000 > +#define DENALI_CTL_125_DATA 0x00000000 > +#define DENALI_CTL_126_DATA 0x00030300 > +#define DENALI_CTL_127_DATA 0x00000000 > +#define DENALI_CTL_128_DATA 0x00010001 > +#define DENALI_CTL_129_DATA 0x00000000 > +#define DENALI_CTL_130_DATA 0x00000000 > +#define DENALI_CTL_131_DATA 0x00000000 > +#define DENALI_CTL_132_DATA 0x00000000 > +#define DENALI_CTL_133_DATA 0x00000000 > +#define DENALI_CTL_134_DATA 0x00000000 > +#define DENALI_CTL_135_DATA 0x00000000 > +#define DENALI_CTL_136_DATA 0x00000000 > +#define DENALI_CTL_137_DATA 0x00000000 > +#define DENALI_CTL_138_DATA 0x00000000 > +#define DENALI_CTL_139_DATA 0x00000000 > +#define DENALI_CTL_140_DATA 0x00000000 > +#define DENALI_CTL_141_DATA 0x00000000 > +#define DENALI_CTL_142_DATA 0x00000000 > +#define DENALI_CTL_143_DATA 0x00000000 > +#define DENALI_CTL_144_DATA 0x00000000 > +#define DENALI_CTL_145_DATA 0x00000000 > +#define DENALI_CTL_146_DATA 0x00000000 > +#define DENALI_CTL_147_DATA 0x00000000 > +#define DENALI_CTL_148_DATA 0x00000000 > +#define DENALI_CTL_149_DATA 0x00000000 > +#define DENALI_CTL_150_DATA 0x00000000 > +#define DENALI_CTL_151_DATA 0x00000000 > +#define DENALI_CTL_152_DATA 0x00000000 > +#define DENALI_CTL_153_DATA 0x00000000 > +#define DENALI_CTL_154_DATA 0x00000000 > +#define DENALI_CTL_155_DATA 0x00000000 > +#define DENALI_CTL_156_DATA 0x00000000 > +#define DENALI_CTL_157_DATA 0x00000000 > +#define DENALI_CTL_158_DATA 0x00000000 > +#define DENALI_CTL_159_DATA 0x00000000 > +#define DENALI_CTL_160_DATA 0x00000000 > +#define DENALI_CTL_161_DATA 0x02010102 > +#define DENALI_CTL_162_DATA 0x0107070d > +#define DENALI_CTL_163_DATA 0x04040400 > +#define DENALI_CTL_164_DATA 0x03000503 > +#define DENALI_CTL_165_DATA 0x00000000 > +#define DENALI_CTL_166_DATA 0x00000000 > +#define DENALI_CTL_167_DATA 0x00000000 > +#define DENALI_CTL_168_DATA 0x00000000 > +#define DENALI_CTL_169_DATA 0x280d0000 > +#define DENALI_CTL_170_DATA 0x01000000 > +#define DENALI_CTL_171_DATA 0x00000000 > +#define DENALI_CTL_172_DATA 0x00010001 > +#define DENALI_CTL_173_DATA 0x00000000 > +#define DENALI_CTL_174_DATA 0x00000000 > +#define DENALI_CTL_175_DATA 0x00000000 > +#define DENALI_CTL_176_DATA 0x00000000 > +#define DENALI_CTL_177_DATA 0x00000000 > +#define DENALI_CTL_178_DATA 0x00000000 > +#define DENALI_CTL_179_DATA 0x00000000 > +#define DENALI_CTL_180_DATA 0x00000000 > +#define DENALI_CTL_181_DATA 0x01000000 > +#define DENALI_CTL_182_DATA 0x00000001 > +#define DENALI_CTL_183_DATA 0x00000100 > +#define DENALI_CTL_184_DATA 0x00000101 > +#define DENALI_CTL_185_DATA 0x67676701 > +#define DENALI_CTL_186_DATA 0x67676767 > +#define DENALI_CTL_187_DATA 0x67676767 > +#define DENALI_CTL_188_DATA 0x67676767 > +#define DENALI_CTL_189_DATA 0x67676767 > +#define DENALI_CTL_190_DATA 0x67676767 > +#define DENALI_CTL_191_DATA 0x67676767 > +#define DENALI_CTL_192_DATA 0x67676767 > +#define DENALI_CTL_193_DATA 0x67676767 > +#define DENALI_CTL_194_DATA 0x01000067 > +#define DENALI_CTL_195_DATA 0x00000001 > +#define DENALI_CTL_196_DATA 0x00000101 > +#define DENALI_CTL_197_DATA 0x00000000 > +#define DENALI_CTL_198_DATA 0x00000000 > +#define DENALI_CTL_199_DATA 0x00000000 > +#define DENALI_CTL_200_DATA 0x00000000 > +#define DENALI_CTL_201_DATA 0x00000000 > +#define DENALI_CTL_202_DATA 0x00000000 > +#define DENALI_CTL_203_DATA 0x00000000 > +#define DENALI_CTL_204_DATA 0x00000000 > +#define DENALI_CTL_205_DATA 0x00000000 > +#define DENALI_CTL_206_DATA 0x00000000 > +#define DENALI_CTL_207_DATA 0x00000000 > +#define DENALI_CTL_208_DATA 0x00000001 > +#define DENALI_CTL_209_DATA 0x00000000 > +#define DENALI_CTL_210_DATA 0x007fffff > +#define DENALI_CTL_211_DATA 0x00000000 > +#define DENALI_CTL_212_DATA 0x007fffff > +#define DENALI_CTL_213_DATA 0x00000000 > +#define DENALI_CTL_214_DATA 0x007fffff > +#define DENALI_CTL_215_DATA 0x00000000 > +#define DENALI_CTL_216_DATA 0x007fffff > +#define DENALI_CTL_217_DATA 0x00000000 > +#define DENALI_CTL_218_DATA 0x007fffff > +#define DENALI_CTL_219_DATA 0x00000000 > +#define DENALI_CTL_220_DATA 0x007fffff > +#define DENALI_CTL_221_DATA 0x00000000 > +#define DENALI_CTL_222_DATA 0x007fffff > +#define DENALI_CTL_223_DATA 0x00000000 > +#define DENALI_CTL_224_DATA 0x037fffff > +#define DENALI_CTL_225_DATA 0xffffffff > +#define DENALI_CTL_226_DATA 0x000f000f > +#define DENALI_CTL_227_DATA 0x00ffff03 > +#define DENALI_CTL_228_DATA 0x000fffff > +#define DENALI_CTL_229_DATA 0x0003000f > +#define DENALI_CTL_230_DATA 0xffffffff > +#define DENALI_CTL_231_DATA 0x000f000f > +#define DENALI_CTL_232_DATA 0x00ffff03 > +#define DENALI_CTL_233_DATA 0x000fffff > +#define DENALI_CTL_234_DATA 0x0003000f > +#define DENALI_CTL_235_DATA 0xffffffff > +#define DENALI_CTL_236_DATA 0x000f000f > +#define DENALI_CTL_237_DATA 0x00ffff03 > +#define DENALI_CTL_238_DATA 0x000fffff > +#define DENALI_CTL_239_DATA 0x0003000f > +#define DENALI_CTL_240_DATA 0xffffffff > +#define DENALI_CTL_241_DATA 0x000f000f > +#define DENALI_CTL_242_DATA 0x00ffff03 > +#define DENALI_CTL_243_DATA 0x000fffff > +#define DENALI_CTL_244_DATA 0x6407000f > +#define DENALI_CTL_245_DATA 0x01640001 > +#define DENALI_CTL_246_DATA 0x00000000 > +#define DENALI_CTL_247_DATA 0x00000000 > +#define DENALI_CTL_248_DATA 0x00001700 > +#define DENALI_CTL_249_DATA 0x00386c05 > +#define DENALI_CTL_250_DATA 0x02000200 > +#define DENALI_CTL_251_DATA 0x02000200 > +#define DENALI_CTL_252_DATA 0x0000386c > +#define DENALI_CTL_253_DATA 0x00023438 > +#define DENALI_CTL_254_DATA 0x02020d10 > +#define DENALI_CTL_255_DATA 0x00140303 > +#define DENALI_CTL_256_DATA 0x00000000 > +#define DENALI_CTL_257_DATA 0x00000000 > +#define DENALI_CTL_258_DATA 0x00001403 > +#define DENALI_CTL_259_DATA 0x00000000 > +#define DENALI_CTL_260_DATA 0x00000000 > +#define DENALI_CTL_261_DATA 0x00000000 > +#define DENALI_CTL_262_DATA 0x00000000 > +#define DENALI_CTL_263_DATA 0x0d010000 > +#define DENALI_CTL_264_DATA 0x00000008 > diff --git a/board/sifive/fu540/regconfig-phy.h b/board/sifive/fu540/regconfig-phy.h > new file mode 100644 > index 0000000000..3450aecdf1 > --- /dev/null > +++ b/board/sifive/fu540/regconfig-phy.h > @@ -0,0 +1,1224 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2019 SiFive, Inc > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + * Troy Benjegerdes <troy.benjegerdes at sifive.com> > + */ > + > +#define DENALI_PHY_00_DATA 0x31706542 > +#define DENALI_PHY_01_DATA 0x0004c008 > +#define DENALI_PHY_02_DATA 0x000000da > +#define DENALI_PHY_03_DATA 0x00000000 > +#define DENALI_PHY_04_DATA 0x00000000 > +#define DENALI_PHY_05_DATA 0x00010000 > +#define DENALI_PHY_06_DATA 0x01DDDD90 > +#define DENALI_PHY_07_DATA 0x01DDDD90 > +#define DENALI_PHY_08_DATA 0x01030000 > +#define DENALI_PHY_09_DATA 0x01000000 > +#define DENALI_PHY_10_DATA 0x00c00000 > +#define DENALI_PHY_11_DATA 0x00000007 > +#define DENALI_PHY_12_DATA 0x00000000 > +#define DENALI_PHY_13_DATA 0x00000000 > +#define DENALI_PHY_14_DATA 0x04000408 > +#define DENALI_PHY_15_DATA 0x00000408 > +#define DENALI_PHY_16_DATA 0x00e4e400 > +#define DENALI_PHY_17_DATA 0x00000000 > +#define DENALI_PHY_18_DATA 0x00000000 > +#define DENALI_PHY_19_DATA 0x00000000 > +#define DENALI_PHY_20_DATA 0x00000000 > +#define DENALI_PHY_21_DATA 0x00000000 > +#define DENALI_PHY_22_DATA 0x00000000 > +#define DENALI_PHY_23_DATA 0x00000000 > +#define DENALI_PHY_24_DATA 0x00000000 > +#define DENALI_PHY_25_DATA 0x00000000 > +#define DENALI_PHY_26_DATA 0x00000000 > +#define DENALI_PHY_27_DATA 0x00000000 > +#define DENALI_PHY_28_DATA 0x00000000 > +#define DENALI_PHY_29_DATA 0x00000000 > +#define DENALI_PHY_30_DATA 0x00000000 > +#define DENALI_PHY_31_DATA 0x00000000 > +#define DENALI_PHY_32_DATA 0x00000000 > +#define DENALI_PHY_33_DATA 0x00200000 > +#define DENALI_PHY_34_DATA 0x00000000 > +#define DENALI_PHY_35_DATA 0x00000000 > +#define DENALI_PHY_36_DATA 0x00000000 > +#define DENALI_PHY_37_DATA 0x00000000 > +#define DENALI_PHY_38_DATA 0x00000000 > +#define DENALI_PHY_39_DATA 0x00000000 > +#define DENALI_PHY_40_DATA 0x02800280 > +#define DENALI_PHY_41_DATA 0x02800280 > +#define DENALI_PHY_42_DATA 0x02800280 > +#define DENALI_PHY_43_DATA 0x02800280 > +#define DENALI_PHY_44_DATA 0x00000280 > +#define DENALI_PHY_45_DATA 0x00000000 > +#define DENALI_PHY_46_DATA 0x00000000 > +#define DENALI_PHY_47_DATA 0x00000000 > +#define DENALI_PHY_48_DATA 0x00000000 > +#define DENALI_PHY_49_DATA 0x00000000 > +#define DENALI_PHY_50_DATA 0x00800080 > +#define DENALI_PHY_51_DATA 0x00800080 > +#define DENALI_PHY_52_DATA 0x00800080 > +#define DENALI_PHY_53_DATA 0x00800080 > +#define DENALI_PHY_54_DATA 0x00800080 > +#define DENALI_PHY_55_DATA 0x00800080 > +#define DENALI_PHY_56_DATA 0x00800080 > +#define DENALI_PHY_57_DATA 0x00800080 > +#define DENALI_PHY_58_DATA 0x00800080 > +#define DENALI_PHY_59_DATA 0x000100da > +#define DENALI_PHY_60_DATA 0x01000200 > +#define DENALI_PHY_61_DATA 0x00000000 > +#define DENALI_PHY_62_DATA 0x00000000 > +#define DENALI_PHY_63_DATA 0x00000002 > +#define DENALI_PHY_64_DATA 0x51313152 > +#define DENALI_PHY_65_DATA 0x80013130 > +#define DENALI_PHY_66_DATA 0x02000080 > +#define DENALI_PHY_67_DATA 0x00100001 > +#define DENALI_PHY_68_DATA 0x0c064208 > +#define DENALI_PHY_69_DATA 0x000f0c0f > +#define DENALI_PHY_70_DATA 0x01000140 > +#define DENALI_PHY_71_DATA 0x0000000c > +#define DENALI_PHY_72_DATA 0x00000000 > +#define DENALI_PHY_73_DATA 0x00000000 > +#define DENALI_PHY_74_DATA 0x00000000 > +#define DENALI_PHY_75_DATA 0x00000000 > +#define DENALI_PHY_76_DATA 0x00000000 > +#define DENALI_PHY_77_DATA 0x00000000 > +#define DENALI_PHY_78_DATA 0x00000000 > +#define DENALI_PHY_79_DATA 0x00000000 > +#define DENALI_PHY_80_DATA 0x00000000 > +#define DENALI_PHY_81_DATA 0x00000000 > +#define DENALI_PHY_82_DATA 0x00000000 > +#define DENALI_PHY_83_DATA 0x00000000 > +#define DENALI_PHY_84_DATA 0x00000000 > +#define DENALI_PHY_85_DATA 0x00000000 > +#define DENALI_PHY_86_DATA 0x00000000 > +#define DENALI_PHY_87_DATA 0x00000000 > +#define DENALI_PHY_88_DATA 0x00000000 > +#define DENALI_PHY_89_DATA 0x00000000 > +#define DENALI_PHY_90_DATA 0x00000000 > +#define DENALI_PHY_91_DATA 0x00000000 > +#define DENALI_PHY_92_DATA 0x00000000 > +#define DENALI_PHY_93_DATA 0x00000000 > +#define DENALI_PHY_94_DATA 0x00000000 > +#define DENALI_PHY_95_DATA 0x00000000 > +#define DENALI_PHY_96_DATA 0x00000000 > +#define DENALI_PHY_97_DATA 0x00000000 > +#define DENALI_PHY_98_DATA 0x00000000 > +#define DENALI_PHY_99_DATA 0x00000000 > +#define DENALI_PHY_100_DATA 0x00000000 > +#define DENALI_PHY_101_DATA 0x00000000 > +#define DENALI_PHY_102_DATA 0x00000000 > +#define DENALI_PHY_103_DATA 0x00000000 > +#define DENALI_PHY_104_DATA 0x00000000 > +#define DENALI_PHY_105_DATA 0x00000000 > +#define DENALI_PHY_106_DATA 0x00000000 > +#define DENALI_PHY_107_DATA 0x00000000 > +#define DENALI_PHY_108_DATA 0x00000000 > +#define DENALI_PHY_109_DATA 0x00000000 > +#define DENALI_PHY_110_DATA 0x00000000 > +#define DENALI_PHY_111_DATA 0x00000000 > +#define DENALI_PHY_112_DATA 0x00000000 > +#define DENALI_PHY_113_DATA 0x00000000 > +#define DENALI_PHY_114_DATA 0x00000000 > +#define DENALI_PHY_115_DATA 0x00000000 > +#define DENALI_PHY_116_DATA 0x00000000 > +#define DENALI_PHY_117_DATA 0x00000000 > +#define DENALI_PHY_118_DATA 0x00000000 > +#define DENALI_PHY_119_DATA 0x00000000 > +#define DENALI_PHY_120_DATA 0x00000000 > +#define DENALI_PHY_121_DATA 0x00000000 > +#define DENALI_PHY_122_DATA 0x00000000 > +#define DENALI_PHY_123_DATA 0x00000000 > +#define DENALI_PHY_124_DATA 0x00000000 > +#define DENALI_PHY_125_DATA 0x00000000 > +#define DENALI_PHY_126_DATA 0x00000000 > +#define DENALI_PHY_127_DATA 0x00000000 > +#define DENALI_PHY_128_DATA 0x40263571 > +#define DENALI_PHY_129_DATA 0x0004c008 > +#define DENALI_PHY_130_DATA 0x000000da > +#define DENALI_PHY_131_DATA 0x00000000 > +#define DENALI_PHY_132_DATA 0x00000000 > +#define DENALI_PHY_133_DATA 0x00010000 > +#define DENALI_PHY_134_DATA 0x01DDDD90 > +#define DENALI_PHY_135_DATA 0x01DDDD90 > +#define DENALI_PHY_136_DATA 0x01030000 > +#define DENALI_PHY_137_DATA 0x01000000 > +#define DENALI_PHY_138_DATA 0x00c00000 > +#define DENALI_PHY_139_DATA 0x00000007 > +#define DENALI_PHY_140_DATA 0x00000000 > +#define DENALI_PHY_141_DATA 0x00000000 > +#define DENALI_PHY_142_DATA 0x04000408 > +#define DENALI_PHY_143_DATA 0x00000408 > +#define DENALI_PHY_144_DATA 0x00e4e400 > +#define DENALI_PHY_145_DATA 0x00000000 > +#define DENALI_PHY_146_DATA 0x00000000 > +#define DENALI_PHY_147_DATA 0x00000000 > +#define DENALI_PHY_148_DATA 0x00000000 > +#define DENALI_PHY_149_DATA 0x00000000 > +#define DENALI_PHY_150_DATA 0x00000000 > +#define DENALI_PHY_151_DATA 0x00000000 > +#define DENALI_PHY_152_DATA 0x00000000 > +#define DENALI_PHY_153_DATA 0x00000000 > +#define DENALI_PHY_154_DATA 0x00000000 > +#define DENALI_PHY_155_DATA 0x00000000 > +#define DENALI_PHY_156_DATA 0x00000000 > +#define DENALI_PHY_157_DATA 0x00000000 > +#define DENALI_PHY_158_DATA 0x00000000 > +#define DENALI_PHY_159_DATA 0x00000000 > +#define DENALI_PHY_160_DATA 0x00000000 > +#define DENALI_PHY_161_DATA 0x00200000 > +#define DENALI_PHY_162_DATA 0x00000000 > +#define DENALI_PHY_163_DATA 0x00000000 > +#define DENALI_PHY_164_DATA 0x00000000 > +#define DENALI_PHY_165_DATA 0x00000000 > +#define DENALI_PHY_166_DATA 0x00000000 > +#define DENALI_PHY_167_DATA 0x00000000 > +#define DENALI_PHY_168_DATA 0x02800280 > +#define DENALI_PHY_169_DATA 0x02800280 > +#define DENALI_PHY_170_DATA 0x02800280 > +#define DENALI_PHY_171_DATA 0x02800280 > +#define DENALI_PHY_172_DATA 0x00000280 > +#define DENALI_PHY_173_DATA 0x00000000 > +#define DENALI_PHY_174_DATA 0x00000000 > +#define DENALI_PHY_175_DATA 0x00000000 > +#define DENALI_PHY_176_DATA 0x00000000 > +#define DENALI_PHY_177_DATA 0x00000000 > +#define DENALI_PHY_178_DATA 0x00800080 > +#define DENALI_PHY_179_DATA 0x00800080 > +#define DENALI_PHY_180_DATA 0x00800080 > +#define DENALI_PHY_181_DATA 0x00800080 > +#define DENALI_PHY_182_DATA 0x00800080 > +#define DENALI_PHY_183_DATA 0x00800080 > +#define DENALI_PHY_184_DATA 0x00800080 > +#define DENALI_PHY_185_DATA 0x00800080 > +#define DENALI_PHY_186_DATA 0x00800080 > +#define DENALI_PHY_187_DATA 0x000100da > +#define DENALI_PHY_188_DATA 0x01000200 > +#define DENALI_PHY_189_DATA 0x00000000 > +#define DENALI_PHY_190_DATA 0x00000000 > +#define DENALI_PHY_191_DATA 0x00000002 > +#define DENALI_PHY_192_DATA 0x51313152 > +#define DENALI_PHY_193_DATA 0x80013130 > +#define DENALI_PHY_194_DATA 0x02000080 > +#define DENALI_PHY_195_DATA 0x00100001 > +#define DENALI_PHY_196_DATA 0x0c064208 > +#define DENALI_PHY_197_DATA 0x000f0c0f > +#define DENALI_PHY_198_DATA 0x01000140 > +#define DENALI_PHY_199_DATA 0x0000000c > +#define DENALI_PHY_200_DATA 0x00000000 > +#define DENALI_PHY_201_DATA 0x00000000 > +#define DENALI_PHY_202_DATA 0x00000000 > +#define DENALI_PHY_203_DATA 0x00000000 > +#define DENALI_PHY_204_DATA 0x00000000 > +#define DENALI_PHY_205_DATA 0x00000000 > +#define DENALI_PHY_206_DATA 0x00000000 > +#define DENALI_PHY_207_DATA 0x00000000 > +#define DENALI_PHY_208_DATA 0x00000000 > +#define DENALI_PHY_209_DATA 0x00000000 > +#define DENALI_PHY_210_DATA 0x00000000 > +#define DENALI_PHY_211_DATA 0x00000000 > +#define DENALI_PHY_212_DATA 0x00000000 > +#define DENALI_PHY_213_DATA 0x00000000 > +#define DENALI_PHY_214_DATA 0x00000000 > +#define DENALI_PHY_215_DATA 0x00000000 > +#define DENALI_PHY_216_DATA 0x00000000 > +#define DENALI_PHY_217_DATA 0x00000000 > +#define DENALI_PHY_218_DATA 0x00000000 > +#define DENALI_PHY_219_DATA 0x00000000 > +#define DENALI_PHY_220_DATA 0x00000000 > +#define DENALI_PHY_221_DATA 0x00000000 > +#define DENALI_PHY_222_DATA 0x00000000 > +#define DENALI_PHY_223_DATA 0x00000000 > +#define DENALI_PHY_224_DATA 0x00000000 > +#define DENALI_PHY_225_DATA 0x00000000 > +#define DENALI_PHY_226_DATA 0x00000000 > +#define DENALI_PHY_227_DATA 0x00000000 > +#define DENALI_PHY_228_DATA 0x00000000 > +#define DENALI_PHY_229_DATA 0x00000000 > +#define DENALI_PHY_230_DATA 0x00000000 > +#define DENALI_PHY_231_DATA 0x00000000 > +#define DENALI_PHY_232_DATA 0x00000000 > +#define DENALI_PHY_233_DATA 0x00000000 > +#define DENALI_PHY_234_DATA 0x00000000 > +#define DENALI_PHY_235_DATA 0x00000000 > +#define DENALI_PHY_236_DATA 0x00000000 > +#define DENALI_PHY_237_DATA 0x00000000 > +#define DENALI_PHY_238_DATA 0x00000000 > +#define DENALI_PHY_239_DATA 0x00000000 > +#define DENALI_PHY_240_DATA 0x00000000 > +#define DENALI_PHY_241_DATA 0x00000000 > +#define DENALI_PHY_242_DATA 0x00000000 > +#define DENALI_PHY_243_DATA 0x00000000 > +#define DENALI_PHY_244_DATA 0x00000000 > +#define DENALI_PHY_245_DATA 0x00000000 > +#define DENALI_PHY_246_DATA 0x00000000 > +#define DENALI_PHY_247_DATA 0x00000000 > +#define DENALI_PHY_248_DATA 0x00000000 > +#define DENALI_PHY_249_DATA 0x00000000 > +#define DENALI_PHY_250_DATA 0x00000000 > +#define DENALI_PHY_251_DATA 0x00000000 > +#define DENALI_PHY_252_DATA 0x00000000 > +#define DENALI_PHY_253_DATA 0x00000000 > +#define DENALI_PHY_254_DATA 0x00000000 > +#define DENALI_PHY_255_DATA 0x00000000 > +#define DENALI_PHY_256_DATA 0x46052371 > +#define DENALI_PHY_257_DATA 0x0004c008 > +#define DENALI_PHY_258_DATA 0x000000da > +#define DENALI_PHY_259_DATA 0x00000000 > +#define DENALI_PHY_260_DATA 0x00000000 > +#define DENALI_PHY_261_DATA 0x00010000 > +#define DENALI_PHY_262_DATA 0x01DDDD90 > +#define DENALI_PHY_263_DATA 0x01DDDD90 > +#define DENALI_PHY_264_DATA 0x01030000 > +#define DENALI_PHY_265_DATA 0x01000000 > +#define DENALI_PHY_266_DATA 0x00c00000 > +#define DENALI_PHY_267_DATA 0x00000007 > +#define DENALI_PHY_268_DATA 0x00000000 > +#define DENALI_PHY_269_DATA 0x00000000 > +#define DENALI_PHY_270_DATA 0x04000408 > +#define DENALI_PHY_271_DATA 0x00000408 > +#define DENALI_PHY_272_DATA 0x00e4e400 > +#define DENALI_PHY_273_DATA 0x00000000 > +#define DENALI_PHY_274_DATA 0x00000000 > +#define DENALI_PHY_275_DATA 0x00000000 > +#define DENALI_PHY_276_DATA 0x00000000 > +#define DENALI_PHY_277_DATA 0x00000000 > +#define DENALI_PHY_278_DATA 0x00000000 > +#define DENALI_PHY_279_DATA 0x00000000 > +#define DENALI_PHY_280_DATA 0x00000000 > +#define DENALI_PHY_281_DATA 0x00000000 > +#define DENALI_PHY_282_DATA 0x00000000 > +#define DENALI_PHY_283_DATA 0x00000000 > +#define DENALI_PHY_284_DATA 0x00000000 > +#define DENALI_PHY_285_DATA 0x00000000 > +#define DENALI_PHY_286_DATA 0x00000000 > +#define DENALI_PHY_287_DATA 0x00000000 > +#define DENALI_PHY_288_DATA 0x00000000 > +#define DENALI_PHY_289_DATA 0x00200000 > +#define DENALI_PHY_290_DATA 0x00000000 > +#define DENALI_PHY_291_DATA 0x00000000 > +#define DENALI_PHY_292_DATA 0x00000000 > +#define DENALI_PHY_293_DATA 0x00000000 > +#define DENALI_PHY_294_DATA 0x00000000 > +#define DENALI_PHY_295_DATA 0x00000000 > +#define DENALI_PHY_296_DATA 0x02800280 > +#define DENALI_PHY_297_DATA 0x02800280 > +#define DENALI_PHY_298_DATA 0x02800280 > +#define DENALI_PHY_299_DATA 0x02800280 > +#define DENALI_PHY_300_DATA 0x00000280 > +#define DENALI_PHY_301_DATA 0x00000000 > +#define DENALI_PHY_302_DATA 0x00000000 > +#define DENALI_PHY_303_DATA 0x00000000 > +#define DENALI_PHY_304_DATA 0x00000000 > +#define DENALI_PHY_305_DATA 0x00000000 > +#define DENALI_PHY_306_DATA 0x00800080 > +#define DENALI_PHY_307_DATA 0x00800080 > +#define DENALI_PHY_308_DATA 0x00800080 > +#define DENALI_PHY_309_DATA 0x00800080 > +#define DENALI_PHY_310_DATA 0x00800080 > +#define DENALI_PHY_311_DATA 0x00800080 > +#define DENALI_PHY_312_DATA 0x00800080 > +#define DENALI_PHY_313_DATA 0x00800080 > +#define DENALI_PHY_314_DATA 0x00800080 > +#define DENALI_PHY_315_DATA 0x000100da > +#define DENALI_PHY_316_DATA 0x00000200 > +#define DENALI_PHY_317_DATA 0x00000000 > +#define DENALI_PHY_318_DATA 0x00000000 > +#define DENALI_PHY_319_DATA 0x00000002 > +#define DENALI_PHY_320_DATA 0x51313152 > +#define DENALI_PHY_321_DATA 0x80013130 > +#define DENALI_PHY_322_DATA 0x02000080 > +#define DENALI_PHY_323_DATA 0x00100001 > +#define DENALI_PHY_324_DATA 0x0c064208 > +#define DENALI_PHY_325_DATA 0x000f0c0f > +#define DENALI_PHY_326_DATA 0x01000140 > +#define DENALI_PHY_327_DATA 0x0000000c > +#define DENALI_PHY_328_DATA 0x00000000 > +#define DENALI_PHY_329_DATA 0x00000000 > +#define DENALI_PHY_330_DATA 0x00000000 > +#define DENALI_PHY_331_DATA 0x00000000 > +#define DENALI_PHY_332_DATA 0x00000000 > +#define DENALI_PHY_333_DATA 0x00000000 > +#define DENALI_PHY_334_DATA 0x00000000 > +#define DENALI_PHY_335_DATA 0x00000000 > +#define DENALI_PHY_336_DATA 0x00000000 > +#define DENALI_PHY_337_DATA 0x00000000 > +#define DENALI_PHY_338_DATA 0x00000000 > +#define DENALI_PHY_339_DATA 0x00000000 > +#define DENALI_PHY_340_DATA 0x00000000 > +#define DENALI_PHY_341_DATA 0x00000000 > +#define DENALI_PHY_342_DATA 0x00000000 > +#define DENALI_PHY_343_DATA 0x00000000 > +#define DENALI_PHY_344_DATA 0x00000000 > +#define DENALI_PHY_345_DATA 0x00000000 > +#define DENALI_PHY_346_DATA 0x00000000 > +#define DENALI_PHY_347_DATA 0x00000000 > +#define DENALI_PHY_348_DATA 0x00000000 > +#define DENALI_PHY_349_DATA 0x00000000 > +#define DENALI_PHY_350_DATA 0x00000000 > +#define DENALI_PHY_351_DATA 0x00000000 > +#define DENALI_PHY_352_DATA 0x00000000 > +#define DENALI_PHY_353_DATA 0x00000000 > +#define DENALI_PHY_354_DATA 0x00000000 > +#define DENALI_PHY_355_DATA 0x00000000 > +#define DENALI_PHY_356_DATA 0x00000000 > +#define DENALI_PHY_357_DATA 0x00000000 > +#define DENALI_PHY_358_DATA 0x00000000 > +#define DENALI_PHY_359_DATA 0x00000000 > +#define DENALI_PHY_360_DATA 0x00000000 > +#define DENALI_PHY_361_DATA 0x00000000 > +#define DENALI_PHY_362_DATA 0x00000000 > +#define DENALI_PHY_363_DATA 0x00000000 > +#define DENALI_PHY_364_DATA 0x00000000 > +#define DENALI_PHY_365_DATA 0x00000000 > +#define DENALI_PHY_366_DATA 0x00000000 > +#define DENALI_PHY_367_DATA 0x00000000 > +#define DENALI_PHY_368_DATA 0x00000000 > +#define DENALI_PHY_369_DATA 0x00000000 > +#define DENALI_PHY_370_DATA 0x00000000 > +#define DENALI_PHY_371_DATA 0x00000000 > +#define DENALI_PHY_372_DATA 0x00000000 > +#define DENALI_PHY_373_DATA 0x00000000 > +#define DENALI_PHY_374_DATA 0x00000000 > +#define DENALI_PHY_375_DATA 0x00000000 > +#define DENALI_PHY_376_DATA 0x00000000 > +#define DENALI_PHY_377_DATA 0x00000000 > +#define DENALI_PHY_378_DATA 0x00000000 > +#define DENALI_PHY_379_DATA 0x00000000 > +#define DENALI_PHY_380_DATA 0x00000000 > +#define DENALI_PHY_381_DATA 0x00000000 > +#define DENALI_PHY_382_DATA 0x00000000 > +#define DENALI_PHY_383_DATA 0x00000000 > +#define DENALI_PHY_384_DATA 0x37654120 > +#define DENALI_PHY_385_DATA 0x0004c008 > +#define DENALI_PHY_386_DATA 0x000000da > +#define DENALI_PHY_387_DATA 0x00000000 > +#define DENALI_PHY_388_DATA 0x00000000 > +#define DENALI_PHY_389_DATA 0x00010000 > +#define DENALI_PHY_390_DATA 0x01DDDD90 > +#define DENALI_PHY_391_DATA 0x01DDDD90 > +#define DENALI_PHY_392_DATA 0x01030000 > +#define DENALI_PHY_393_DATA 0x01000000 > +#define DENALI_PHY_394_DATA 0x00c00000 > +#define DENALI_PHY_395_DATA 0x00000007 > +#define DENALI_PHY_396_DATA 0x00000000 > +#define DENALI_PHY_397_DATA 0x00000000 > +#define DENALI_PHY_398_DATA 0x04000408 > +#define DENALI_PHY_399_DATA 0x00000408 > +#define DENALI_PHY_400_DATA 0x00e4e400 > +#define DENALI_PHY_401_DATA 0x00000000 > +#define DENALI_PHY_402_DATA 0x00000000 > +#define DENALI_PHY_403_DATA 0x00000000 > +#define DENALI_PHY_404_DATA 0x00000000 > +#define DENALI_PHY_405_DATA 0x00000000 > +#define DENALI_PHY_406_DATA 0x00000000 > +#define DENALI_PHY_407_DATA 0x00000000 > +#define DENALI_PHY_408_DATA 0x00000000 > +#define DENALI_PHY_409_DATA 0x00000000 > +#define DENALI_PHY_410_DATA 0x00000000 > +#define DENALI_PHY_411_DATA 0x00000000 > +#define DENALI_PHY_412_DATA 0x00000000 > +#define DENALI_PHY_413_DATA 0x00000000 > +#define DENALI_PHY_414_DATA 0x00000000 > +#define DENALI_PHY_415_DATA 0x00000000 > +#define DENALI_PHY_416_DATA 0x00000000 > +#define DENALI_PHY_417_DATA 0x00200000 > +#define DENALI_PHY_418_DATA 0x00000000 > +#define DENALI_PHY_419_DATA 0x00000000 > +#define DENALI_PHY_420_DATA 0x00000000 > +#define DENALI_PHY_421_DATA 0x00000000 > +#define DENALI_PHY_422_DATA 0x00000000 > +#define DENALI_PHY_423_DATA 0x00000000 > +#define DENALI_PHY_424_DATA 0x02800280 > +#define DENALI_PHY_425_DATA 0x02800280 > +#define DENALI_PHY_426_DATA 0x02800280 > +#define DENALI_PHY_427_DATA 0x02800280 > +#define DENALI_PHY_428_DATA 0x00000280 > +#define DENALI_PHY_429_DATA 0x00000000 > +#define DENALI_PHY_430_DATA 0x00000000 > +#define DENALI_PHY_431_DATA 0x00000000 > +#define DENALI_PHY_432_DATA 0x00000000 > +#define DENALI_PHY_433_DATA 0x00000000 > +#define DENALI_PHY_434_DATA 0x00800080 > +#define DENALI_PHY_435_DATA 0x00800080 > +#define DENALI_PHY_436_DATA 0x00800080 > +#define DENALI_PHY_437_DATA 0x00800080 > +#define DENALI_PHY_438_DATA 0x00800080 > +#define DENALI_PHY_439_DATA 0x00800080 > +#define DENALI_PHY_440_DATA 0x00800080 > +#define DENALI_PHY_441_DATA 0x00800080 > +#define DENALI_PHY_442_DATA 0x00800080 > +#define DENALI_PHY_443_DATA 0x000100da > +#define DENALI_PHY_444_DATA 0x00000200 > +#define DENALI_PHY_445_DATA 0x00000000 > +#define DENALI_PHY_446_DATA 0x00000000 > +#define DENALI_PHY_447_DATA 0x00000002 > +#define DENALI_PHY_448_DATA 0x51313152 > +#define DENALI_PHY_449_DATA 0x80013130 > +#define DENALI_PHY_450_DATA 0x02000080 > +#define DENALI_PHY_451_DATA 0x00100001 > +#define DENALI_PHY_452_DATA 0x0c064208 > +#define DENALI_PHY_453_DATA 0x000f0c0f > +#define DENALI_PHY_454_DATA 0x01000140 > +#define DENALI_PHY_455_DATA 0x0000000c > +#define DENALI_PHY_456_DATA 0x00000000 > +#define DENALI_PHY_457_DATA 0x00000000 > +#define DENALI_PHY_458_DATA 0x00000000 > +#define DENALI_PHY_459_DATA 0x00000000 > +#define DENALI_PHY_460_DATA 0x00000000 > +#define DENALI_PHY_461_DATA 0x00000000 > +#define DENALI_PHY_462_DATA 0x00000000 > +#define DENALI_PHY_463_DATA 0x00000000 > +#define DENALI_PHY_464_DATA 0x00000000 > +#define DENALI_PHY_465_DATA 0x00000000 > +#define DENALI_PHY_466_DATA 0x00000000 > +#define DENALI_PHY_467_DATA 0x00000000 > +#define DENALI_PHY_468_DATA 0x00000000 > +#define DENALI_PHY_469_DATA 0x00000000 > +#define DENALI_PHY_470_DATA 0x00000000 > +#define DENALI_PHY_471_DATA 0x00000000 > +#define DENALI_PHY_472_DATA 0x00000000 > +#define DENALI_PHY_473_DATA 0x00000000 > +#define DENALI_PHY_474_DATA 0x00000000 > +#define DENALI_PHY_475_DATA 0x00000000 > +#define DENALI_PHY_476_DATA 0x00000000 > +#define DENALI_PHY_477_DATA 0x00000000 > +#define DENALI_PHY_478_DATA 0x00000000 > +#define DENALI_PHY_479_DATA 0x00000000 > +#define DENALI_PHY_480_DATA 0x00000000 > +#define DENALI_PHY_481_DATA 0x00000000 > +#define DENALI_PHY_482_DATA 0x00000000 > +#define DENALI_PHY_483_DATA 0x00000000 > +#define DENALI_PHY_484_DATA 0x00000000 > +#define DENALI_PHY_485_DATA 0x00000000 > +#define DENALI_PHY_486_DATA 0x00000000 > +#define DENALI_PHY_487_DATA 0x00000000 > +#define DENALI_PHY_488_DATA 0x00000000 > +#define DENALI_PHY_489_DATA 0x00000000 > +#define DENALI_PHY_490_DATA 0x00000000 > +#define DENALI_PHY_491_DATA 0x00000000 > +#define DENALI_PHY_492_DATA 0x00000000 > +#define DENALI_PHY_493_DATA 0x00000000 > +#define DENALI_PHY_494_DATA 0x00000000 > +#define DENALI_PHY_495_DATA 0x00000000 > +#define DENALI_PHY_496_DATA 0x00000000 > +#define DENALI_PHY_497_DATA 0x00000000 > +#define DENALI_PHY_498_DATA 0x00000000 > +#define DENALI_PHY_499_DATA 0x00000000 > +#define DENALI_PHY_500_DATA 0x00000000 > +#define DENALI_PHY_501_DATA 0x00000000 > +#define DENALI_PHY_502_DATA 0x00000000 > +#define DENALI_PHY_503_DATA 0x00000000 > +#define DENALI_PHY_504_DATA 0x00000000 > +#define DENALI_PHY_505_DATA 0x00000000 > +#define DENALI_PHY_506_DATA 0x00000000 > +#define DENALI_PHY_507_DATA 0x00000000 > +#define DENALI_PHY_508_DATA 0x00000000 > +#define DENALI_PHY_509_DATA 0x00000000 > +#define DENALI_PHY_510_DATA 0x00000000 > +#define DENALI_PHY_511_DATA 0x00000000 > +#define DENALI_PHY_512_DATA 0x24316750 > +#define DENALI_PHY_513_DATA 0x0004c008 > +#define DENALI_PHY_514_DATA 0x000000da > +#define DENALI_PHY_515_DATA 0x00000000 > +#define DENALI_PHY_516_DATA 0x00000000 > +#define DENALI_PHY_517_DATA 0x00010000 > +#define DENALI_PHY_518_DATA 0x01DDDD90 > +#define DENALI_PHY_519_DATA 0x01DDDD90 > +#define DENALI_PHY_520_DATA 0x01030000 > +#define DENALI_PHY_521_DATA 0x01000000 > +#define DENALI_PHY_522_DATA 0x00c00000 > +#define DENALI_PHY_523_DATA 0x00000007 > +#define DENALI_PHY_524_DATA 0x00000000 > +#define DENALI_PHY_525_DATA 0x00000000 > +#define DENALI_PHY_526_DATA 0x04000408 > +#define DENALI_PHY_527_DATA 0x00000408 > +#define DENALI_PHY_528_DATA 0x00e4e400 > +#define DENALI_PHY_529_DATA 0x00000000 > +#define DENALI_PHY_530_DATA 0x00000000 > +#define DENALI_PHY_531_DATA 0x00000000 > +#define DENALI_PHY_532_DATA 0x00000000 > +#define DENALI_PHY_533_DATA 0x00000000 > +#define DENALI_PHY_534_DATA 0x00000000 > +#define DENALI_PHY_535_DATA 0x00000000 > +#define DENALI_PHY_536_DATA 0x00000000 > +#define DENALI_PHY_537_DATA 0x00000000 > +#define DENALI_PHY_538_DATA 0x00000000 > +#define DENALI_PHY_539_DATA 0x00000000 > +#define DENALI_PHY_540_DATA 0x00000000 > +#define DENALI_PHY_541_DATA 0x00000000 > +#define DENALI_PHY_542_DATA 0x00000000 > +#define DENALI_PHY_543_DATA 0x00000000 > +#define DENALI_PHY_544_DATA 0x00000000 > +#define DENALI_PHY_545_DATA 0x00200000 > +#define DENALI_PHY_546_DATA 0x00000000 > +#define DENALI_PHY_547_DATA 0x00000000 > +#define DENALI_PHY_548_DATA 0x00000000 > +#define DENALI_PHY_549_DATA 0x00000000 > +#define DENALI_PHY_550_DATA 0x00000000 > +#define DENALI_PHY_551_DATA 0x00000000 > +#define DENALI_PHY_552_DATA 0x02800280 > +#define DENALI_PHY_553_DATA 0x02800280 > +#define DENALI_PHY_554_DATA 0x02800280 > +#define DENALI_PHY_555_DATA 0x02800280 > +#define DENALI_PHY_556_DATA 0x00000280 > +#define DENALI_PHY_557_DATA 0x00000000 > +#define DENALI_PHY_558_DATA 0x00000000 > +#define DENALI_PHY_559_DATA 0x00000000 > +#define DENALI_PHY_560_DATA 0x00000000 > +#define DENALI_PHY_561_DATA 0x00000000 > +#define DENALI_PHY_562_DATA 0x00800080 > +#define DENALI_PHY_563_DATA 0x00800080 > +#define DENALI_PHY_564_DATA 0x00800080 > +#define DENALI_PHY_565_DATA 0x00800080 > +#define DENALI_PHY_566_DATA 0x00800080 > +#define DENALI_PHY_567_DATA 0x00800080 > +#define DENALI_PHY_568_DATA 0x00800080 > +#define DENALI_PHY_569_DATA 0x00800080 > +#define DENALI_PHY_570_DATA 0x00800080 > +#define DENALI_PHY_571_DATA 0x000100da > +#define DENALI_PHY_572_DATA 0x00000200 > +#define DENALI_PHY_573_DATA 0x00000000 > +#define DENALI_PHY_574_DATA 0x00000000 > +#define DENALI_PHY_575_DATA 0x00000002 > +#define DENALI_PHY_576_DATA 0x51313152 > +#define DENALI_PHY_577_DATA 0x80013130 > +#define DENALI_PHY_578_DATA 0x02000080 > +#define DENALI_PHY_579_DATA 0x00100001 > +#define DENALI_PHY_580_DATA 0x0c064208 > +#define DENALI_PHY_581_DATA 0x000f0c0f > +#define DENALI_PHY_582_DATA 0x01000140 > +#define DENALI_PHY_583_DATA 0x0000000c > +#define DENALI_PHY_584_DATA 0x00000000 > +#define DENALI_PHY_585_DATA 0x00000000 > +#define DENALI_PHY_586_DATA 0x00000000 > +#define DENALI_PHY_587_DATA 0x00000000 > +#define DENALI_PHY_588_DATA 0x00000000 > +#define DENALI_PHY_589_DATA 0x00000000 > +#define DENALI_PHY_590_DATA 0x00000000 > +#define DENALI_PHY_591_DATA 0x00000000 > +#define DENALI_PHY_592_DATA 0x00000000 > +#define DENALI_PHY_593_DATA 0x00000000 > +#define DENALI_PHY_594_DATA 0x00000000 > +#define DENALI_PHY_595_DATA 0x00000000 > +#define DENALI_PHY_596_DATA 0x00000000 > +#define DENALI_PHY_597_DATA 0x00000000 > +#define DENALI_PHY_598_DATA 0x00000000 > +#define DENALI_PHY_599_DATA 0x00000000 > +#define DENALI_PHY_600_DATA 0x00000000 > +#define DENALI_PHY_601_DATA 0x00000000 > +#define DENALI_PHY_602_DATA 0x00000000 > +#define DENALI_PHY_603_DATA 0x00000000 > +#define DENALI_PHY_604_DATA 0x00000000 > +#define DENALI_PHY_605_DATA 0x00000000 > +#define DENALI_PHY_606_DATA 0x00000000 > +#define DENALI_PHY_607_DATA 0x00000000 > +#define DENALI_PHY_608_DATA 0x00000000 > +#define DENALI_PHY_609_DATA 0x00000000 > +#define DENALI_PHY_610_DATA 0x00000000 > +#define DENALI_PHY_611_DATA 0x00000000 > +#define DENALI_PHY_612_DATA 0x00000000 > +#define DENALI_PHY_613_DATA 0x00000000 > +#define DENALI_PHY_614_DATA 0x00000000 > +#define DENALI_PHY_615_DATA 0x00000000 > +#define DENALI_PHY_616_DATA 0x00000000 > +#define DENALI_PHY_617_DATA 0x00000000 > +#define DENALI_PHY_618_DATA 0x00000000 > +#define DENALI_PHY_619_DATA 0x00000000 > +#define DENALI_PHY_620_DATA 0x00000000 > +#define DENALI_PHY_621_DATA 0x00000000 > +#define DENALI_PHY_622_DATA 0x00000000 > +#define DENALI_PHY_623_DATA 0x00000000 > +#define DENALI_PHY_624_DATA 0x00000000 > +#define DENALI_PHY_625_DATA 0x00000000 > +#define DENALI_PHY_626_DATA 0x00000000 > +#define DENALI_PHY_627_DATA 0x00000000 > +#define DENALI_PHY_628_DATA 0x00000000 > +#define DENALI_PHY_629_DATA 0x00000000 > +#define DENALI_PHY_630_DATA 0x00000000 > +#define DENALI_PHY_631_DATA 0x00000000 > +#define DENALI_PHY_632_DATA 0x00000000 > +#define DENALI_PHY_633_DATA 0x00000000 > +#define DENALI_PHY_634_DATA 0x00000000 > +#define DENALI_PHY_635_DATA 0x00000000 > +#define DENALI_PHY_636_DATA 0x00000000 > +#define DENALI_PHY_637_DATA 0x00000000 > +#define DENALI_PHY_638_DATA 0x00000000 > +#define DENALI_PHY_639_DATA 0x00000000 > +#define DENALI_PHY_640_DATA 0x35174620 > +#define DENALI_PHY_641_DATA 0x0004c008 > +#define DENALI_PHY_642_DATA 0x000000da > +#define DENALI_PHY_643_DATA 0x00000000 > +#define DENALI_PHY_644_DATA 0x00000000 > +#define DENALI_PHY_645_DATA 0x00010000 > +#define DENALI_PHY_646_DATA 0x01DDDD90 > +#define DENALI_PHY_647_DATA 0x01DDDD90 > +#define DENALI_PHY_648_DATA 0x01030000 > +#define DENALI_PHY_649_DATA 0x01000000 > +#define DENALI_PHY_650_DATA 0x00c00000 > +#define DENALI_PHY_651_DATA 0x00000007 > +#define DENALI_PHY_652_DATA 0x00000000 > +#define DENALI_PHY_653_DATA 0x00000000 > +#define DENALI_PHY_654_DATA 0x04000408 > +#define DENALI_PHY_655_DATA 0x00000408 > +#define DENALI_PHY_656_DATA 0x00e4e400 > +#define DENALI_PHY_657_DATA 0x00000000 > +#define DENALI_PHY_658_DATA 0x00000000 > +#define DENALI_PHY_659_DATA 0x00000000 > +#define DENALI_PHY_660_DATA 0x00000000 > +#define DENALI_PHY_661_DATA 0x00000000 > +#define DENALI_PHY_662_DATA 0x00000000 > +#define DENALI_PHY_663_DATA 0x00000000 > +#define DENALI_PHY_664_DATA 0x00000000 > +#define DENALI_PHY_665_DATA 0x00000000 > +#define DENALI_PHY_666_DATA 0x00000000 > +#define DENALI_PHY_667_DATA 0x00000000 > +#define DENALI_PHY_668_DATA 0x00000000 > +#define DENALI_PHY_669_DATA 0x00000000 > +#define DENALI_PHY_670_DATA 0x00000000 > +#define DENALI_PHY_671_DATA 0x00000000 > +#define DENALI_PHY_672_DATA 0x00000000 > +#define DENALI_PHY_673_DATA 0x00200000 > +#define DENALI_PHY_674_DATA 0x00000000 > +#define DENALI_PHY_675_DATA 0x00000000 > +#define DENALI_PHY_676_DATA 0x00000000 > +#define DENALI_PHY_677_DATA 0x00000000 > +#define DENALI_PHY_678_DATA 0x00000000 > +#define DENALI_PHY_679_DATA 0x00000000 > +#define DENALI_PHY_680_DATA 0x02800280 > +#define DENALI_PHY_681_DATA 0x02800280 > +#define DENALI_PHY_682_DATA 0x02800280 > +#define DENALI_PHY_683_DATA 0x02800280 > +#define DENALI_PHY_684_DATA 0x00000280 > +#define DENALI_PHY_685_DATA 0x00000000 > +#define DENALI_PHY_686_DATA 0x00000000 > +#define DENALI_PHY_687_DATA 0x00000000 > +#define DENALI_PHY_688_DATA 0x00000000 > +#define DENALI_PHY_689_DATA 0x00000000 > +#define DENALI_PHY_690_DATA 0x00800080 > +#define DENALI_PHY_691_DATA 0x00800080 > +#define DENALI_PHY_692_DATA 0x00800080 > +#define DENALI_PHY_693_DATA 0x00800080 > +#define DENALI_PHY_694_DATA 0x00800080 > +#define DENALI_PHY_695_DATA 0x00800080 > +#define DENALI_PHY_696_DATA 0x00800080 > +#define DENALI_PHY_697_DATA 0x00800080 > +#define DENALI_PHY_698_DATA 0x00800080 > +#define DENALI_PHY_699_DATA 0x000100da > +#define DENALI_PHY_700_DATA 0x00000200 > +#define DENALI_PHY_701_DATA 0x00000000 > +#define DENALI_PHY_702_DATA 0x00000000 > +#define DENALI_PHY_703_DATA 0x00000002 > +#define DENALI_PHY_704_DATA 0x51313152 > +#define DENALI_PHY_705_DATA 0x80013130 > +#define DENALI_PHY_706_DATA 0x02000080 > +#define DENALI_PHY_707_DATA 0x00100001 > +#define DENALI_PHY_708_DATA 0x0c064208 > +#define DENALI_PHY_709_DATA 0x000f0c0f > +#define DENALI_PHY_710_DATA 0x01000140 > +#define DENALI_PHY_711_DATA 0x0000000c > +#define DENALI_PHY_712_DATA 0x00000000 > +#define DENALI_PHY_713_DATA 0x00000000 > +#define DENALI_PHY_714_DATA 0x00000000 > +#define DENALI_PHY_715_DATA 0x00000000 > +#define DENALI_PHY_716_DATA 0x00000000 > +#define DENALI_PHY_717_DATA 0x00000000 > +#define DENALI_PHY_718_DATA 0x00000000 > +#define DENALI_PHY_719_DATA 0x00000000 > +#define DENALI_PHY_720_DATA 0x00000000 > +#define DENALI_PHY_721_DATA 0x00000000 > +#define DENALI_PHY_722_DATA 0x00000000 > +#define DENALI_PHY_723_DATA 0x00000000 > +#define DENALI_PHY_724_DATA 0x00000000 > +#define DENALI_PHY_725_DATA 0x00000000 > +#define DENALI_PHY_726_DATA 0x00000000 > +#define DENALI_PHY_727_DATA 0x00000000 > +#define DENALI_PHY_728_DATA 0x00000000 > +#define DENALI_PHY_729_DATA 0x00000000 > +#define DENALI_PHY_730_DATA 0x00000000 > +#define DENALI_PHY_731_DATA 0x00000000 > +#define DENALI_PHY_732_DATA 0x00000000 > +#define DENALI_PHY_733_DATA 0x00000000 > +#define DENALI_PHY_734_DATA 0x00000000 > +#define DENALI_PHY_735_DATA 0x00000000 > +#define DENALI_PHY_736_DATA 0x00000000 > +#define DENALI_PHY_737_DATA 0x00000000 > +#define DENALI_PHY_738_DATA 0x00000000 > +#define DENALI_PHY_739_DATA 0x00000000 > +#define DENALI_PHY_740_DATA 0x00000000 > +#define DENALI_PHY_741_DATA 0x00000000 > +#define DENALI_PHY_742_DATA 0x00000000 > +#define DENALI_PHY_743_DATA 0x00000000 > +#define DENALI_PHY_744_DATA 0x00000000 > +#define DENALI_PHY_745_DATA 0x00000000 > +#define DENALI_PHY_746_DATA 0x00000000 > +#define DENALI_PHY_747_DATA 0x00000000 > +#define DENALI_PHY_748_DATA 0x00000000 > +#define DENALI_PHY_749_DATA 0x00000000 > +#define DENALI_PHY_750_DATA 0x00000000 > +#define DENALI_PHY_751_DATA 0x00000000 > +#define DENALI_PHY_752_DATA 0x00000000 > +#define DENALI_PHY_753_DATA 0x00000000 > +#define DENALI_PHY_754_DATA 0x00000000 > +#define DENALI_PHY_755_DATA 0x00000000 > +#define DENALI_PHY_756_DATA 0x00000000 > +#define DENALI_PHY_757_DATA 0x00000000 > +#define DENALI_PHY_758_DATA 0x00000000 > +#define DENALI_PHY_759_DATA 0x00000000 > +#define DENALI_PHY_760_DATA 0x00000000 > +#define DENALI_PHY_761_DATA 0x00000000 > +#define DENALI_PHY_762_DATA 0x00000000 > +#define DENALI_PHY_763_DATA 0x00000000 > +#define DENALI_PHY_764_DATA 0x00000000 > +#define DENALI_PHY_765_DATA 0x00000000 > +#define DENALI_PHY_766_DATA 0x00000000 > +#define DENALI_PHY_767_DATA 0x00000000 > +#define DENALI_PHY_768_DATA 0x15203476 > +#define DENALI_PHY_769_DATA 0x0004c008 > +#define DENALI_PHY_770_DATA 0x000000da > +#define DENALI_PHY_771_DATA 0x00000000 > +#define DENALI_PHY_772_DATA 0x00000000 > +#define DENALI_PHY_773_DATA 0x00010000 > +#define DENALI_PHY_774_DATA 0x01DDDD90 > +#define DENALI_PHY_775_DATA 0x01DDDD90 > +#define DENALI_PHY_776_DATA 0x01030000 > +#define DENALI_PHY_777_DATA 0x01000000 > +#define DENALI_PHY_778_DATA 0x00c00000 > +#define DENALI_PHY_779_DATA 0x00000007 > +#define DENALI_PHY_780_DATA 0x00000000 > +#define DENALI_PHY_781_DATA 0x00000000 > +#define DENALI_PHY_782_DATA 0x04000408 > +#define DENALI_PHY_783_DATA 0x00000408 > +#define DENALI_PHY_784_DATA 0x00e4e400 > +#define DENALI_PHY_785_DATA 0x00000000 > +#define DENALI_PHY_786_DATA 0x00000000 > +#define DENALI_PHY_787_DATA 0x00000000 > +#define DENALI_PHY_788_DATA 0x00000000 > +#define DENALI_PHY_789_DATA 0x00000000 > +#define DENALI_PHY_790_DATA 0x00000000 > +#define DENALI_PHY_791_DATA 0x00000000 > +#define DENALI_PHY_792_DATA 0x00000000 > +#define DENALI_PHY_793_DATA 0x00000000 > +#define DENALI_PHY_794_DATA 0x00000000 > +#define DENALI_PHY_795_DATA 0x00000000 > +#define DENALI_PHY_796_DATA 0x00000000 > +#define DENALI_PHY_797_DATA 0x00000000 > +#define DENALI_PHY_798_DATA 0x00000000 > +#define DENALI_PHY_799_DATA 0x00000000 > +#define DENALI_PHY_800_DATA 0x00000000 > +#define DENALI_PHY_801_DATA 0x00200000 > +#define DENALI_PHY_802_DATA 0x00000000 > +#define DENALI_PHY_803_DATA 0x00000000 > +#define DENALI_PHY_804_DATA 0x00000000 > +#define DENALI_PHY_805_DATA 0x00000000 > +#define DENALI_PHY_806_DATA 0x00000000 > +#define DENALI_PHY_807_DATA 0x00000000 > +#define DENALI_PHY_808_DATA 0x02800280 > +#define DENALI_PHY_809_DATA 0x02800280 > +#define DENALI_PHY_810_DATA 0x02800280 > +#define DENALI_PHY_811_DATA 0x02800280 > +#define DENALI_PHY_812_DATA 0x00000280 > +#define DENALI_PHY_813_DATA 0x00000000 > +#define DENALI_PHY_814_DATA 0x00000000 > +#define DENALI_PHY_815_DATA 0x00000000 > +#define DENALI_PHY_816_DATA 0x00000000 > +#define DENALI_PHY_817_DATA 0x00000000 > +#define DENALI_PHY_818_DATA 0x00800080 > +#define DENALI_PHY_819_DATA 0x00800080 > +#define DENALI_PHY_820_DATA 0x00800080 > +#define DENALI_PHY_821_DATA 0x00800080 > +#define DENALI_PHY_822_DATA 0x00800080 > +#define DENALI_PHY_823_DATA 0x00800080 > +#define DENALI_PHY_824_DATA 0x00800080 > +#define DENALI_PHY_825_DATA 0x00800080 > +#define DENALI_PHY_826_DATA 0x00800080 > +#define DENALI_PHY_827_DATA 0x000100da > +#define DENALI_PHY_828_DATA 0x00000200 > +#define DENALI_PHY_829_DATA 0x00000000 > +#define DENALI_PHY_830_DATA 0x00000000 > +#define DENALI_PHY_831_DATA 0x00000002 > +#define DENALI_PHY_832_DATA 0x51313152 > +#define DENALI_PHY_833_DATA 0x80013130 > +#define DENALI_PHY_834_DATA 0x02000080 > +#define DENALI_PHY_835_DATA 0x00100001 > +#define DENALI_PHY_836_DATA 0x0c064208 > +#define DENALI_PHY_837_DATA 0x000f0c0f > +#define DENALI_PHY_838_DATA 0x01000140 > +#define DENALI_PHY_839_DATA 0x0000000c > +#define DENALI_PHY_840_DATA 0x00000000 > +#define DENALI_PHY_841_DATA 0x00000000 > +#define DENALI_PHY_842_DATA 0x00000000 > +#define DENALI_PHY_843_DATA 0x00000000 > +#define DENALI_PHY_844_DATA 0x00000000 > +#define DENALI_PHY_845_DATA 0x00000000 > +#define DENALI_PHY_846_DATA 0x00000000 > +#define DENALI_PHY_847_DATA 0x00000000 > +#define DENALI_PHY_848_DATA 0x00000000 > +#define DENALI_PHY_849_DATA 0x00000000 > +#define DENALI_PHY_850_DATA 0x00000000 > +#define DENALI_PHY_851_DATA 0x00000000 > +#define DENALI_PHY_852_DATA 0x00000000 > +#define DENALI_PHY_853_DATA 0x00000000 > +#define DENALI_PHY_854_DATA 0x00000000 > +#define DENALI_PHY_855_DATA 0x00000000 > +#define DENALI_PHY_856_DATA 0x00000000 > +#define DENALI_PHY_857_DATA 0x00000000 > +#define DENALI_PHY_858_DATA 0x00000000 > +#define DENALI_PHY_859_DATA 0x00000000 > +#define DENALI_PHY_860_DATA 0x00000000 > +#define DENALI_PHY_861_DATA 0x00000000 > +#define DENALI_PHY_862_DATA 0x00000000 > +#define DENALI_PHY_863_DATA 0x00000000 > +#define DENALI_PHY_864_DATA 0x00000000 > +#define DENALI_PHY_865_DATA 0x00000000 > +#define DENALI_PHY_866_DATA 0x00000000 > +#define DENALI_PHY_867_DATA 0x00000000 > +#define DENALI_PHY_868_DATA 0x00000000 > +#define DENALI_PHY_869_DATA 0x00000000 > +#define DENALI_PHY_870_DATA 0x00000000 > +#define DENALI_PHY_871_DATA 0x00000000 > +#define DENALI_PHY_872_DATA 0x00000000 > +#define DENALI_PHY_873_DATA 0x00000000 > +#define DENALI_PHY_874_DATA 0x00000000 > +#define DENALI_PHY_875_DATA 0x00000000 > +#define DENALI_PHY_876_DATA 0x00000000 > +#define DENALI_PHY_877_DATA 0x00000000 > +#define DENALI_PHY_878_DATA 0x00000000 > +#define DENALI_PHY_879_DATA 0x00000000 > +#define DENALI_PHY_880_DATA 0x00000000 > +#define DENALI_PHY_881_DATA 0x00000000 > +#define DENALI_PHY_882_DATA 0x00000000 > +#define DENALI_PHY_883_DATA 0x00000000 > +#define DENALI_PHY_884_DATA 0x00000000 > +#define DENALI_PHY_885_DATA 0x00000000 > +#define DENALI_PHY_886_DATA 0x00000000 > +#define DENALI_PHY_887_DATA 0x00000000 > +#define DENALI_PHY_888_DATA 0x00000000 > +#define DENALI_PHY_889_DATA 0x00000000 > +#define DENALI_PHY_890_DATA 0x00000000 > +#define DENALI_PHY_891_DATA 0x00000000 > +#define DENALI_PHY_892_DATA 0x00000000 > +#define DENALI_PHY_893_DATA 0x00000000 > +#define DENALI_PHY_894_DATA 0x00000000 > +#define DENALI_PHY_895_DATA 0x00000000 > +#define DENALI_PHY_896_DATA 0x41753206 > +#define DENALI_PHY_897_DATA 0x0004c008 > +#define DENALI_PHY_898_DATA 0x000000da > +#define DENALI_PHY_899_DATA 0x00000000 > +#define DENALI_PHY_900_DATA 0x00000000 > +#define DENALI_PHY_901_DATA 0x00010000 > +#define DENALI_PHY_902_DATA 0x01DDDD90 > +#define DENALI_PHY_903_DATA 0x01DDDD90 > +#define DENALI_PHY_904_DATA 0x01030000 > +#define DENALI_PHY_905_DATA 0x01000000 > +#define DENALI_PHY_906_DATA 0x00c00000 > +#define DENALI_PHY_907_DATA 0x00000007 > +#define DENALI_PHY_908_DATA 0x00000000 > +#define DENALI_PHY_909_DATA 0x00000000 > +#define DENALI_PHY_910_DATA 0x04000408 > +#define DENALI_PHY_911_DATA 0x00000408 > +#define DENALI_PHY_912_DATA 0x00e4e400 > +#define DENALI_PHY_913_DATA 0x00000000 > +#define DENALI_PHY_914_DATA 0x00000000 > +#define DENALI_PHY_915_DATA 0x00000000 > +#define DENALI_PHY_916_DATA 0x00000000 > +#define DENALI_PHY_917_DATA 0x00000000 > +#define DENALI_PHY_918_DATA 0x00000000 > +#define DENALI_PHY_919_DATA 0x00000000 > +#define DENALI_PHY_920_DATA 0x00000000 > +#define DENALI_PHY_921_DATA 0x00000000 > +#define DENALI_PHY_922_DATA 0x00000000 > +#define DENALI_PHY_923_DATA 0x00000000 > +#define DENALI_PHY_924_DATA 0x00000000 > +#define DENALI_PHY_925_DATA 0x00000000 > +#define DENALI_PHY_926_DATA 0x00000000 > +#define DENALI_PHY_927_DATA 0x00000000 > +#define DENALI_PHY_928_DATA 0x00000000 > +#define DENALI_PHY_929_DATA 0x00200000 > +#define DENALI_PHY_930_DATA 0x00000000 > +#define DENALI_PHY_931_DATA 0x00000000 > +#define DENALI_PHY_932_DATA 0x00000000 > +#define DENALI_PHY_933_DATA 0x00000000 > +#define DENALI_PHY_934_DATA 0x00000000 > +#define DENALI_PHY_935_DATA 0x00000000 > +#define DENALI_PHY_936_DATA 0x02800280 > +#define DENALI_PHY_937_DATA 0x02800280 > +#define DENALI_PHY_938_DATA 0x02800280 > +#define DENALI_PHY_939_DATA 0x02800280 > +#define DENALI_PHY_940_DATA 0x00000280 > +#define DENALI_PHY_941_DATA 0x00000000 > +#define DENALI_PHY_942_DATA 0x00000000 > +#define DENALI_PHY_943_DATA 0x00000000 > +#define DENALI_PHY_944_DATA 0x00000000 > +#define DENALI_PHY_945_DATA 0x00000000 > +#define DENALI_PHY_946_DATA 0x00800080 > +#define DENALI_PHY_947_DATA 0x00800080 > +#define DENALI_PHY_948_DATA 0x00800080 > +#define DENALI_PHY_949_DATA 0x00800080 > +#define DENALI_PHY_950_DATA 0x00800080 > +#define DENALI_PHY_951_DATA 0x00800080 > +#define DENALI_PHY_952_DATA 0x00800080 > +#define DENALI_PHY_953_DATA 0x00800080 > +#define DENALI_PHY_954_DATA 0x00800080 > +#define DENALI_PHY_955_DATA 0x000100da > +#define DENALI_PHY_956_DATA 0x00000200 > +#define DENALI_PHY_957_DATA 0x00000000 > +#define DENALI_PHY_958_DATA 0x00000000 > +#define DENALI_PHY_959_DATA 0x00000002 > +#define DENALI_PHY_960_DATA 0x51313152 > +#define DENALI_PHY_961_DATA 0x80013130 > +#define DENALI_PHY_962_DATA 0x02000080 > +#define DENALI_PHY_963_DATA 0x00100001 > +#define DENALI_PHY_964_DATA 0x0c064208 > +#define DENALI_PHY_965_DATA 0x000f0c0f > +#define DENALI_PHY_966_DATA 0x01000140 > +#define DENALI_PHY_967_DATA 0x0000000c > +#define DENALI_PHY_968_DATA 0x00000000 > +#define DENALI_PHY_969_DATA 0x00000000 > +#define DENALI_PHY_970_DATA 0x00000000 > +#define DENALI_PHY_971_DATA 0x00000000 > +#define DENALI_PHY_972_DATA 0x00000000 > +#define DENALI_PHY_973_DATA 0x00000000 > +#define DENALI_PHY_974_DATA 0x00000000 > +#define DENALI_PHY_975_DATA 0x00000000 > +#define DENALI_PHY_976_DATA 0x00000000 > +#define DENALI_PHY_977_DATA 0x00000000 > +#define DENALI_PHY_978_DATA 0x00000000 > +#define DENALI_PHY_979_DATA 0x00000000 > +#define DENALI_PHY_980_DATA 0x00000000 > +#define DENALI_PHY_981_DATA 0x00000000 > +#define DENALI_PHY_982_DATA 0x00000000 > +#define DENALI_PHY_983_DATA 0x00000000 > +#define DENALI_PHY_984_DATA 0x00000000 > +#define DENALI_PHY_985_DATA 0x00000000 > +#define DENALI_PHY_986_DATA 0x00000000 > +#define DENALI_PHY_987_DATA 0x00000000 > +#define DENALI_PHY_988_DATA 0x00000000 > +#define DENALI_PHY_989_DATA 0x00000000 > +#define DENALI_PHY_990_DATA 0x00000000 > +#define DENALI_PHY_991_DATA 0x00000000 > +#define DENALI_PHY_992_DATA 0x00000000 > +#define DENALI_PHY_993_DATA 0x00000000 > +#define DENALI_PHY_994_DATA 0x00000000 > +#define DENALI_PHY_995_DATA 0x00000000 > +#define DENALI_PHY_996_DATA 0x00000000 > +#define DENALI_PHY_997_DATA 0x00000000 > +#define DENALI_PHY_998_DATA 0x00000000 > +#define DENALI_PHY_999_DATA 0x00000000 > +#define DENALI_PHY_1000_DATA 0x00000000 > +#define DENALI_PHY_1001_DATA 0x00000000 > +#define DENALI_PHY_1002_DATA 0x00000000 > +#define DENALI_PHY_1003_DATA 0x00000000 > +#define DENALI_PHY_1004_DATA 0x00000000 > +#define DENALI_PHY_1005_DATA 0x00000000 > +#define DENALI_PHY_1006_DATA 0x00000000 > +#define DENALI_PHY_1007_DATA 0x00000000 > +#define DENALI_PHY_1008_DATA 0x00000000 > +#define DENALI_PHY_1009_DATA 0x00000000 > +#define DENALI_PHY_1010_DATA 0x00000000 > +#define DENALI_PHY_1011_DATA 0x00000000 > +#define DENALI_PHY_1012_DATA 0x00000000 > +#define DENALI_PHY_1013_DATA 0x00000000 > +#define DENALI_PHY_1014_DATA 0x00000000 > +#define DENALI_PHY_1015_DATA 0x00000000 > +#define DENALI_PHY_1016_DATA 0x00000000 > +#define DENALI_PHY_1017_DATA 0x00000000 > +#define DENALI_PHY_1018_DATA 0x00000000 > +#define DENALI_PHY_1019_DATA 0x00000000 > +#define DENALI_PHY_1020_DATA 0x00000000 > +#define DENALI_PHY_1021_DATA 0x00000000 > +#define DENALI_PHY_1022_DATA 0x00000000 > +#define DENALI_PHY_1023_DATA 0x00000000 > +#define DENALI_PHY_1024_DATA 0x36025174 > +#define DENALI_PHY_1025_DATA 0x0004c008 > +#define DENALI_PHY_1026_DATA 0x000000da > +#define DENALI_PHY_1027_DATA 0x00000000 > +#define DENALI_PHY_1028_DATA 0x00000000 > +#define DENALI_PHY_1029_DATA 0x00010000 > +#define DENALI_PHY_1030_DATA 0x01DDDD90 > +#define DENALI_PHY_1031_DATA 0x01DDDD90 > +#define DENALI_PHY_1032_DATA 0x01030000 > +#define DENALI_PHY_1033_DATA 0x01000000 > +#define DENALI_PHY_1034_DATA 0x00c00000 > +#define DENALI_PHY_1035_DATA 0x00000007 > +#define DENALI_PHY_1036_DATA 0x00000000 > +#define DENALI_PHY_1037_DATA 0x00000000 > +#define DENALI_PHY_1038_DATA 0x04000408 > +#define DENALI_PHY_1039_DATA 0x00000408 > +#define DENALI_PHY_1040_DATA 0x00e4e400 > +#define DENALI_PHY_1041_DATA 0x00000000 > +#define DENALI_PHY_1042_DATA 0x00000000 > +#define DENALI_PHY_1043_DATA 0x00000000 > +#define DENALI_PHY_1044_DATA 0x00000000 > +#define DENALI_PHY_1045_DATA 0x00000000 > +#define DENALI_PHY_1046_DATA 0x00000000 > +#define DENALI_PHY_1047_DATA 0x00000000 > +#define DENALI_PHY_1048_DATA 0x00000000 > +#define DENALI_PHY_1049_DATA 0x00000000 > +#define DENALI_PHY_1050_DATA 0x00000000 > +#define DENALI_PHY_1051_DATA 0x00000000 > +#define DENALI_PHY_1052_DATA 0x00000000 > +#define DENALI_PHY_1053_DATA 0x00000000 > +#define DENALI_PHY_1054_DATA 0x00000000 > +#define DENALI_PHY_1055_DATA 0x00000000 > +#define DENALI_PHY_1056_DATA 0x00000000 > +#define DENALI_PHY_1057_DATA 0x00200000 > +#define DENALI_PHY_1058_DATA 0x00000000 > +#define DENALI_PHY_1059_DATA 0x00000000 > +#define DENALI_PHY_1060_DATA 0x00000000 > +#define DENALI_PHY_1061_DATA 0x00000000 > +#define DENALI_PHY_1062_DATA 0x00000000 > +#define DENALI_PHY_1063_DATA 0x00000000 > +#define DENALI_PHY_1064_DATA 0x02800280 > +#define DENALI_PHY_1065_DATA 0x02800280 > +#define DENALI_PHY_1066_DATA 0x02800280 > +#define DENALI_PHY_1067_DATA 0x02800280 > +#define DENALI_PHY_1068_DATA 0x00000280 > +#define DENALI_PHY_1069_DATA 0x00000000 > +#define DENALI_PHY_1070_DATA 0x00000000 > +#define DENALI_PHY_1071_DATA 0x00000000 > +#define DENALI_PHY_1072_DATA 0x00000000 > +#define DENALI_PHY_1073_DATA 0x00000000 > +#define DENALI_PHY_1074_DATA 0x00800080 > +#define DENALI_PHY_1075_DATA 0x00800080 > +#define DENALI_PHY_1076_DATA 0x00800080 > +#define DENALI_PHY_1077_DATA 0x00800080 > +#define DENALI_PHY_1078_DATA 0x00800080 > +#define DENALI_PHY_1079_DATA 0x00800080 > +#define DENALI_PHY_1080_DATA 0x00800080 > +#define DENALI_PHY_1081_DATA 0x00800080 > +#define DENALI_PHY_1082_DATA 0x00800080 > +#define DENALI_PHY_1083_DATA 0x000100da > +#define DENALI_PHY_1084_DATA 0x00000200 > +#define DENALI_PHY_1085_DATA 0x00000000 > +#define DENALI_PHY_1086_DATA 0x00000000 > +#define DENALI_PHY_1087_DATA 0x00000002 > +#define DENALI_PHY_1088_DATA 0x51313152 > +#define DENALI_PHY_1089_DATA 0x80013130 > +#define DENALI_PHY_1090_DATA 0x02000080 > +#define DENALI_PHY_1091_DATA 0x00100001 > +#define DENALI_PHY_1092_DATA 0x0c064208 > +#define DENALI_PHY_1093_DATA 0x000f0c0f > +#define DENALI_PHY_1094_DATA 0x01000140 > +#define DENALI_PHY_1095_DATA 0x0000000c > +#define DENALI_PHY_1096_DATA 0x00000000 > +#define DENALI_PHY_1097_DATA 0x00000000 > +#define DENALI_PHY_1098_DATA 0x00000000 > +#define DENALI_PHY_1099_DATA 0x00000000 > +#define DENALI_PHY_1100_DATA 0x00000000 > +#define DENALI_PHY_1101_DATA 0x00000000 > +#define DENALI_PHY_1102_DATA 0x00000000 > +#define DENALI_PHY_1103_DATA 0x00000000 > +#define DENALI_PHY_1104_DATA 0x00000000 > +#define DENALI_PHY_1105_DATA 0x00000000 > +#define DENALI_PHY_1106_DATA 0x00000000 > +#define DENALI_PHY_1107_DATA 0x00000000 > +#define DENALI_PHY_1108_DATA 0x00000000 > +#define DENALI_PHY_1109_DATA 0x00000000 > +#define DENALI_PHY_1110_DATA 0x00000000 > +#define DENALI_PHY_1111_DATA 0x00000000 > +#define DENALI_PHY_1112_DATA 0x00000000 > +#define DENALI_PHY_1113_DATA 0x00000000 > +#define DENALI_PHY_1114_DATA 0x00000000 > +#define DENALI_PHY_1115_DATA 0x00000000 > +#define DENALI_PHY_1116_DATA 0x00000000 > +#define DENALI_PHY_1117_DATA 0x00000000 > +#define DENALI_PHY_1118_DATA 0x00000000 > +#define DENALI_PHY_1119_DATA 0x00000000 > +#define DENALI_PHY_1120_DATA 0x00000000 > +#define DENALI_PHY_1121_DATA 0x00000000 > +#define DENALI_PHY_1122_DATA 0x00000000 > +#define DENALI_PHY_1123_DATA 0x00000000 > +#define DENALI_PHY_1124_DATA 0x00000000 > +#define DENALI_PHY_1125_DATA 0x00000000 > +#define DENALI_PHY_1126_DATA 0x00000000 > +#define DENALI_PHY_1127_DATA 0x00000000 > +#define DENALI_PHY_1128_DATA 0x00000000 > +#define DENALI_PHY_1129_DATA 0x00000000 > +#define DENALI_PHY_1130_DATA 0x00000000 > +#define DENALI_PHY_1131_DATA 0x00000000 > +#define DENALI_PHY_1132_DATA 0x00000000 > +#define DENALI_PHY_1133_DATA 0x00000000 > +#define DENALI_PHY_1134_DATA 0x00000000 > +#define DENALI_PHY_1135_DATA 0x00000000 > +#define DENALI_PHY_1136_DATA 0x00000000 > +#define DENALI_PHY_1137_DATA 0x00000000 > +#define DENALI_PHY_1138_DATA 0x00000000 > +#define DENALI_PHY_1139_DATA 0x00000000 > +#define DENALI_PHY_1140_DATA 0x00000000 > +#define DENALI_PHY_1141_DATA 0x00000000 > +#define DENALI_PHY_1142_DATA 0x00000000 > +#define DENALI_PHY_1143_DATA 0x00000000 > +#define DENALI_PHY_1144_DATA 0x00000000 > +#define DENALI_PHY_1145_DATA 0x00000000 > +#define DENALI_PHY_1146_DATA 0x00000000 > +#define DENALI_PHY_1147_DATA 0x00000000 > +#define DENALI_PHY_1148_DATA 0x00000000 > +#define DENALI_PHY_1149_DATA 0x00000000 > +#define DENALI_PHY_1150_DATA 0x00000000 > +#define DENALI_PHY_1151_DATA 0x00000000 > +#define DENALI_PHY_1152_DATA 0x00000000 > +#define DENALI_PHY_1153_DATA 0x00000000 > +#define DENALI_PHY_1154_DATA 0x00050000 > +#define DENALI_PHY_1155_DATA 0x00000000 > +#define DENALI_PHY_1156_DATA 0x00000000 > +#define DENALI_PHY_1157_DATA 0x00000000 > +#define DENALI_PHY_1158_DATA 0x00000100 > +#define DENALI_PHY_1159_DATA 0x00000000 > +#define DENALI_PHY_1160_DATA 0x00000000 > +#define DENALI_PHY_1161_DATA 0x00506401 > +#define DENALI_PHY_1162_DATA 0x01221102 > +#define DENALI_PHY_1163_DATA 0x00000122 > +#define DENALI_PHY_1164_DATA 0x00000000 > +#define DENALI_PHY_1165_DATA 0x000B1F00 > +#define DENALI_PHY_1166_DATA 0x0B1F0B1F > +#define DENALI_PHY_1167_DATA 0x0B1F0B1B > +#define DENALI_PHY_1168_DATA 0x0B1F0B1F > +#define DENALI_PHY_1169_DATA 0x0B1F0B1F > +#define DENALI_PHY_1170_DATA 0x00000B00 > +#define DENALI_PHY_1171_DATA 0x42080010 > +#define DENALI_PHY_1172_DATA 0x01000100 > +#define DENALI_PHY_1173_DATA 0x01000100 > +#define DENALI_PHY_1174_DATA 0x01000100 > +#define DENALI_PHY_1175_DATA 0x01000100 > +#define DENALI_PHY_1176_DATA 0x00000000 > +#define DENALI_PHY_1177_DATA 0x00000000 > +#define DENALI_PHY_1178_DATA 0x00000000 > +#define DENALI_PHY_1179_DATA 0x00000000 > +#define DENALI_PHY_1180_DATA 0x00000000 > +#define DENALI_PHY_1181_DATA 0x00000803 > +#define DENALI_PHY_1182_DATA 0x223FFF00 > +#define DENALI_PHY_1183_DATA 0x000008FF > +#define DENALI_PHY_1184_DATA 0x0000057F > +#define DENALI_PHY_1185_DATA 0x0000057F > +#define DENALI_PHY_1186_DATA 0x00037FFF > +#define DENALI_PHY_1187_DATA 0x00037FFF > +#define DENALI_PHY_1188_DATA 0x00004410 > +#define DENALI_PHY_1189_DATA 0x00004410 > +#define DENALI_PHY_1190_DATA 0x00004410 > +#define DENALI_PHY_1191_DATA 0x00004410 > +#define DENALI_PHY_1192_DATA 0x00004410 > +#define DENALI_PHY_1193_DATA 0x00037FFF > +#define DENALI_PHY_1194_DATA 0x00037FFF > +#define DENALI_PHY_1195_DATA 0x00000000 > +#define DENALI_PHY_1196_DATA 0x00000000 > +#define DENALI_PHY_1197_DATA 0x00000000 > +#define DENALI_PHY_1198_DATA 0x04000000 > +#define DENALI_PHY_1199_DATA 0x00000000 > +#define DENALI_PHY_1200_DATA 0x00000000 > +#define DENALI_PHY_1201_DATA 0x00000108 > +#define DENALI_PHY_1202_DATA 0x00000000 > +#define DENALI_PHY_1203_DATA 0x00000000 > +#define DENALI_PHY_1204_DATA 0x00000000 > +#define DENALI_PHY_1205_DATA 0x00000001 > +#define DENALI_PHY_1206_DATA 0x00000000 > +#define DENALI_PHY_1207_DATA 0x00000000 > +#define DENALI_PHY_1208_DATA 0x00000000 > +#define DENALI_PHY_1209_DATA 0x00000000 > +#define DENALI_PHY_1210_DATA 0x00000000 > +#define DENALI_PHY_1211_DATA 0x00000000 > +#define DENALI_PHY_1212_DATA 0x00020100 > +#define DENALI_PHY_1213_DATA 0x00000000 > +#define DENALI_PHY_1214_DATA 0x00000000 > diff --git a/board/sifive/fu540/ux00ddr.h b/board/sifive/fu540/ux00ddr.h > new file mode 100644 > index 0000000000..2b96397852 > --- /dev/null > +++ b/board/sifive/fu540/ux00ddr.h > @@ -0,0 +1,276 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2019 SiFive, Inc > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + * Troy Benjegerdes <troy.benjegerdes at sifive.com> > + */ > + > +#ifndef FU540_UX00DDR_H > +#define FU540_UX00DDR_H > + > +#ifndef __ASSEMBLER__ > + > +#include <stdint.h> > +#include <stddef.h> > +#include <stdbool.h> > + > +extern u32 ddr_phy_settings[1215]; > +extern u32 ddr_ctl_settings[265]; > + > +#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i))) > + > +#define DRAM_CLASS_OFFSET 8 > +#define DRAM_CLASS_DDR4 0xA > +#define OPTIMAL_RMODW_EN_OFFSET 0 > +#define DISABLE_RD_INTERLEAVE_OFFSET 16 > +#define OUT_OF_RANGE_OFFSET 1 > +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 > +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 > +#define MC_INIT_COMPLETE_OFFSET 8 > +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 > +#define DFI_PHY_WRLELV_MODE_OFFSET 24 > +#define DFI_PHY_RDLVL_MODE_OFFSET 24 > +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 > +#define VREF_EN_OFFSET 24 > +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 > +#define AXI0_ADDRESS_RANGE_ENABLE 8 > +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 > +#define RDLVL_EN_OFFSET 16 > +#define RDLVL_GATE_EN_OFFSET 24 > +#define WRLVL_EN_OFFSET 0 > + > +#define PHY_RX_CAL_DQ0_0_OFFSET 0 > +#define PHY_RX_CAL_DQ1_0_OFFSET 16 > + > +static inline void phy_reset(volatile u32 *ddrphyreg, const > + u32 *physettings) > +{ > + unsigned int i; > + > + for (i = 1152; i <= 1214; i++) { > + u32 physet = physettings[i]; > + /*if (physet!=0)*/ ddrphyreg[i] = physet; > + } > + > + for (i = 0; i <= 1151; i++) { > + u32 physet = physettings[i]; > + /*if (physet!=0)*/ ddrphyreg[i] = physet; > + } > +} > + > +static inline void ux00ddr_writeregmap(size_t ahbregaddr, const > + u32 *ctlsettings, const u32 *physettings) > +{ > + volatile u32 *ddrctlreg = (volatile u32 *)ahbregaddr; > + volatile u32 *ddrphyreg = ((volatile u32 *)ahbregaddr) + > + (0x2000 / sizeof(u32)); > + > + unsigned int i; > + > + for (i = 0; i <= 264; i++) { > + u32 ctlset = ctlsettings[i]; > + /*if (ctlset!=0)*/ ddrctlreg[i] = ctlset; > + } > + > + phy_reset(ddrphyreg, physettings); > +} > + > +static inline void ux00ddr_start(size_t ahbregaddr, size_t filteraddr, > + size_t ddrend) > +{ > + // START register at ddrctl register base offset 0 > + u32 regdata = _REG32(0 << 2, ahbregaddr); > + > + regdata |= 0x1; > + _REG32(0 << 2, ahbregaddr) = regdata; > + > + /* > + * WAIT for initialization complete : bit 8 of INT_STATUS > + * (DENALI_CTL_132) 0x210 > + */ > + while ((_REG32(132 << 2, ahbregaddr) & (1 << > + MC_INIT_COMPLETE_OFFSET)) == 0) { > + } > + > + // Disable the BusBlocker in front of the controller AXI slave ports > + volatile u64 *filterreg = (volatile u64 *)filteraddr; > + > + filterreg[0] = 0x0f00000000000000UL | (ddrend >> 2); > +} > + > +static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t > + ahbregaddr) > +{ > + /* > + * Mask off Bit 8 of Interrupt Status > + * Bit [8] The MC initialization has been completed > + */ > + > + _REG32(136 << 2, ahbregaddr) |= (1 << MC_INIT_COMPLETE_OFFSET); > +} > + > +static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) > +{ > + /* > + * Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status > + * Bit [2] Multiple accesses outside the defined PHYSICAL memory > + * space have occurred > + * Bit [1] A memory access outside the defined PHYSICAL memory > + * space has occurred > + */ > + > + _REG32(136 << 2, ahbregaddr) |= ((1 << OUT_OF_RANGE_OFFSET) | (1 << > + MULTIPLE_OUT_OF_RANGE_OFFSET)); > +} > + > +static inline void ux00ddr_mask_port_command_error_interrupt(size_t > + ahbregaddr) > +{ > + /* > + * Mask off Bit 7 of Interrupt Status > + * Bit [7] An error occurred on the port command channel > + */ > + > + _REG32(136 << 2, ahbregaddr) |= (1 << > + PORT_COMMAND_CHANNEL_ERROR_OFFSET); > +} > + > +static inline void ux00ddr_mask_leveling_completed_interrupt(size_t > + ahbregaddr) > +{ > + /* > + * Mask off Bit 22 of Interrupt Status > + * Bit [22] The leveling operation has completed > + */ > + > + _REG32(136 << 2, ahbregaddr) |= (1 << > + LEVELING_OPERATION_COMPLETED_OFFSET); > +} > + > +static inline void ux00ddr_setuprangeprotection(size_t ahbregaddr, size_t > + end_addr) > +{ > + _REG32(209 << 2, ahbregaddr) = 0x0; > + size_t end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; > + > + _REG32(210 << 2, ahbregaddr) = ((u32)end_addr_16kblocks); > + _REG32(212 << 2, ahbregaddr) = 0x0; > + _REG32(214 << 2, ahbregaddr) = 0x0; > + _REG32(216 << 2, ahbregaddr) = 0x0; > + _REG32(224 << 2, ahbregaddr) |= (0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET); > + _REG32(225 << 2, ahbregaddr) = 0xFFFFFFFF; > + _REG32(208 << 2, ahbregaddr) |= (1 << AXI0_ADDRESS_RANGE_ENABLE); > + _REG32(208 << 2, ahbregaddr) |= (1 << PORT_ADDR_PROTECTION_EN_OFFSET); > +} > + > +static inline void ux00ddr_disableaxireadinterleave(size_t ahbregaddr) > +{ > + _REG32(120 << 2, ahbregaddr) |= (1 << DISABLE_RD_INTERLEAVE_OFFSET); > +} > + > +static inline void ux00ddr_disableoptimalrmodw(size_t ahbregaddr) > +{ > + _REG32(21 << 2, ahbregaddr) &= (~(1 << OPTIMAL_RMODW_EN_OFFSET)); > +} > + > +static inline void ux00ddr_enablewriteleveling(size_t ahbregaddr) > +{ > + _REG32(170 << 2, ahbregaddr) |= ((1 << WRLVL_EN_OFFSET) | (1 << > + DFI_PHY_WRLELV_MODE_OFFSET)); > +} > + > +static inline void ux00ddr_enablereadleveling(size_t ahbregaddr) > +{ > + _REG32(181 << 2, ahbregaddr) |= (1 << DFI_PHY_RDLVL_MODE_OFFSET); > + _REG32(260 << 2, ahbregaddr) |= (1 << RDLVL_EN_OFFSET); > +} > + > +static inline void ux00ddr_enablereadlevelinggate(size_t ahbregaddr) > +{ > + _REG32(260 << 2, ahbregaddr) |= (1 << RDLVL_GATE_EN_OFFSET); > + _REG32(182 << 2, ahbregaddr) |= (1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET); > +} > + > +static inline void ux00ddr_enablevreftraining(size_t ahbregaddr) > +{ > + _REG32(184 << 2, ahbregaddr) |= (1 << VREF_EN_OFFSET); > +} > + > +static inline u32 ux00ddr_getdramclass(size_t ahbregaddr) > +{ > + return((_REG32(0, ahbregaddr) >> DRAM_CLASS_OFFSET) & 0xF); > +} > + > +static inline u64 ux00ddr_phy_fixup(size_t ahbregaddr) > +{ > + // return bitmask of failed lanes > + > + size_t ddrphyreg = ahbregaddr + 0x2000; > + > + u64 fails = 0; > + u32 slicebase = 0; > + u32 dq = 0; > + > + // check errata condition > + for (u32 slice = 0; slice < 8; slice++) { > + u32 regbase = slicebase + 34; > + > + for (u32 reg = 0; reg < 4; reg++) { > + u32 updownreg = _REG32((regbase + reg) << 2, > + ddrphyreg); > + > + for (u32 bit = 0; bit < 2; bit++) { > + u32 phy_rx_cal_dqn_0_offset; > + > + if (bit == 0) { > + phy_rx_cal_dqn_0_offset = > + PHY_RX_CAL_DQ0_0_OFFSET; > + } else { > + phy_rx_cal_dqn_0_offset = > + PHY_RX_CAL_DQ1_0_OFFSET; > + } > + > + u32 down = (updownreg >> > + phy_rx_cal_dqn_0_offset) & 0x3F; > + u32 up = (updownreg >> > + (phy_rx_cal_dqn_0_offset + 6)) & 0x3F; > + > + u8 failc0 = ((down == 0) && (up == 0x3F)); > + u8 failc1 = ((up == 0) && (down == 0x3F)); > + > + // print error message on failure > + if (failc0 || failc1) { > + if (fails == 0) > + printf("DDR error in fixing up\n"); > + > + fails |= (1 << dq); > + > + char slicelsc = '0'; > + char slicemsc = '0'; > + > + slicelsc += (dq % 10); > + slicemsc += (dq / 10); > + printf("S "); > + printf("%c", slicemsc); > + printf("%c", slicelsc); > + > + if (failc0) > + printf("U"); > + else > + printf("D"); > + > + printf("\n"); > + } > + dq++; > + } > + } > + slicebase += 128; > + } > + return(0); > +} > + > +#endif /* __ASSEMBLER__ */ > + > +#endif /* FU540_UX00DDR_H */ > diff --git a/board/sifive/fu540/ux00prci.h b/board/sifive/fu540/ux00prci.h > new file mode 100644 > index 0000000000..0393fc2804 > --- /dev/null > +++ b/board/sifive/fu540/ux00prci.h > @@ -0,0 +1,69 @@ > +/* SPDX-License-Identifier: GPL-2.0+ */ > +/* > + * Copyright (c) 2019 SiFive, Inc > + * > + * Authors: > + * Pragnesh Patel <pragnesh.patel at sifive.com> > + * Troy Benjegerdes <troy.benjegerdes at sifive.com> > + */ > + > +#ifndef _SIFIVE_UX00PRCI_H > +#define _SIFIVE_UX00PRCI_H > + > +/* Register offsets */ > +#define UX00PRCI_HFROSCCFG (0x0000) > +#define UX00PRCI_COREPLLCFG (0x0004) > +#define UX00PRCI_COREPLLOUT (0x0008) > +#define UX00PRCI_DDRPLLCFG (0x000C) > +#define UX00PRCI_DDRPLLOUT (0x0010) > +#define UX00PRCI_GEMGXLPLLCFG (0x001C) > +#define UX00PRCI_GEMGXLPLLOUT (0x0020) > +#define UX00PRCI_CORECLKSELREG (0x0024) > +#define UX00PRCI_DEVICESRESETREG (0x0028) > +#define UX00PRCI_CLKMUXSTATUSREG (0x002C) > +#define UX00PRCI_PROCMONCFG (0x00F0) > + > +/* Fields */ > +#define XOSC_EN(x) (((x) & 0x1) << 30) > +#define XOSC_RDY(x) (((x) & 0x1) << 31) > + > +#define PLL_R(x) (((x) & 0x3F) << 0) > +#define PLL_F(x) (((x) & 0x1FF) << 6) > +#define PLL_Q(x) (((x) & 0x7) << 15) > +#define PLL_RANGE(x) (((x) & 0x7) << 18) > +#define PLL_BYPASS(x) (((x) & 0x1) << 24) > +#define PLL_FSE(x) (((x) & 0x1) << 25) > +#define PLL_LOCK(x) (((x) & 0x1) << 31) > + > +#define PLLOUT_DIV(x) (((x) & 0x7F) << 0) > +#define PLLOUT_DIV_BY_1(x) (((x) & 0x1) << 8) > +#define PLLOUT_CLK_EN(x) (((x) & 0x1) << 31) > + > +#define PLL_R_default 0x1 > +#define PLL_F_default 0x1F > +#define PLL_Q_default 0x3 > +#define PLL_RANGE_default 0x0 > +#define PLL_BYPASS_default 0x1 > +#define PLL_FSE_default 0x1 > + > +#define PLLOUT_DIV_default 0x0 > +#define PLLOUT_DIV_BY_1_default 0x0 > +#define PLLOUT_CLK_EN_default 0x0 > + > +#define PLL_CORECLKSEL_HFXIN 0x1 > +#define PLL_CORECLKSEL_COREPLL 0x0 > + > +#define DEVICESRESET_DDR_CTRL_RST_N(x) (((x) & 0x1) << 0) > +#define DEVICESRESET_DDR_AXI_RST_N(x) (((x) & 0x1) << 1) > +#define DEVICESRESET_DDR_AHB_RST_N(x) (((x) & 0x1) << 2) > +#define DEVICESRESET_DDR_PHY_RST_N(x) (((x) & 0x1) << 3) > +#define DEVICESRESET_GEMGXL_RST_N(x) (((x) & 0x1) << 5) > + > +#define CLKMUX_STATUS_CORECLKPLLSEL (0x1 << 0) > +#define CLKMUX_STATUS_TLCLKSEL (0x1 << 1) > +#define CLKMUX_STATUS_RTCXSEL (0x1 << 2) > +#define CLKMUX_STATUS_DDRCTRLCLKSEL (0x1 << 3) > +#define CLKMUX_STATUS_DDRPHYCLKSEL (0x1 << 4) > +#define CLKMUX_STATUS_GEMGXLCLKSEL (0x1 << 6) > + > +#endif // _SIFIVE_UX00PRCI_H > -- > 2.17.1 > Regards, Anup
Hi Anup, >-----Original Message----- >From: Anup Patel <anup at brainfault.org> >Sent: 20 January 2020 11:28 >To: Pragnesh Patel <pragnesh.patel at sifive.com> >Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Palmer Dabbelt ><palmerdabbelt at google.com>; Atish Patra <atish.patra at wdc.com>; Palmer >Dabbelt ( Sifive) <palmer at sifive.com> >Subject: Re: [PATCH v2 7/9] riscv: sifive: fu540: Add U-boot SPL header files > >On Fri, Jan 17, 2020 at 6:18 PM Pragnesh Patel ><pragnesh.patel at sifive.com> wrote: >> >> Add header files needed for U-boot SPL >> >> Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> > >First of all, PATCH7 and PATCH8 does not make sense. > >Instead of PATCH7 and PATCH8, we should have following >patch breakup: >1. A PATCH for adding ddrregs.c,required headers and required >Makefile/Kconfig changes >2. A PATCH for adding spl.c, required headers and required >Makefile/Kconfig changes >3. A PATCH for SPL defconfig > >By "required headers", I mean the headers by this patch only. Will split in v3, thanks. > >> --- >> board/sifive/fu540/ccache.h | 43 + >> board/sifive/fu540/fu540-memory-map.h | 59 ++ >> board/sifive/fu540/regconfig-ctl.h | 274 ++++++ >> board/sifive/fu540/regconfig-phy.h | 1224 +++++++++++++++++++++++++ >> board/sifive/fu540/ux00ddr.h | 276 ++++++ >> board/sifive/fu540/ux00prci.h | 69 ++ >> 6 files changed, 1945 insertions(+) >> create mode 100644 board/sifive/fu540/ccache.h >> create mode 100644 board/sifive/fu540/fu540-memory-map.h >> create mode 100644 board/sifive/fu540/regconfig-ctl.h >> create mode 100644 board/sifive/fu540/regconfig-phy.h >> create mode 100644 board/sifive/fu540/ux00ddr.h >> create mode 100644 board/sifive/fu540/ux00prci.h >> >> diff --git a/board/sifive/fu540/ccache.h b/board/sifive/fu540/ccache.h >> new file mode 100644 >> index 0000000000..0e5e40a1ef >> --- /dev/null >> +++ b/board/sifive/fu540/ccache.h >> @@ -0,0 +1,43 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (c) 2019 SiFive, Inc >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> >> + */ >> + >> +#ifndef FU540_CCACHE_H >> +#define FU540_CCACHE_H >> + >> +#include <asm/arch/cache.h> >> + >> +#ifndef __ASSEMBLER__ >> + >> +#include <stdint.h> >> +#include <linux/types.h> >> + >> +/* Block memory access until operation completed */ >> +static inline void ccache_barrier_0(void) >> +{ >> + asm volatile("fence rw, io" : : : "memory"); >> +} >> + >> +static inline void ccache_barrier_1(void) >> +{ >> + asm volatile("fence io, rw" : : : "memory"); >> +} >> + >> +/* Enable ways; allow cache to use these ways */ >> +static inline void ccache_enable_ways(u64 base_addr, u8 value) >> +{ >> + volatile u32 *enable = (volatile u32 *)(base_addr + >> + CCACHE_ENABLE); >> + ccache_barrier_0(); >> + (*enable) = value; >> + ccache_barrier_1(); >> +} >> + >> +#endif >> + >> +#endif /* FU540_CCACHE_H */ >> diff --git a/board/sifive/fu540/fu540-memory-map.h >b/board/sifive/fu540/fu540-memory-map.h >> new file mode 100644 >> index 0000000000..c0df07d6fd >> --- /dev/null >> +++ b/board/sifive/fu540/fu540-memory-map.h >> @@ -0,0 +1,59 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (c) 2019 SiFive, Inc >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> >> + */ >> + >> +#ifndef FU540_MEMORY_MAP >> +#define FU540_MEMORY_MAP >> + >> +#include <linux/const.h> >> +#include <asm/arch/gpio.h> >> +#include <asm/arch/uart.h> >> +#include "ccache.h" >> +#include "i2c.h" >> +#include "spi.h" >> +#include "ux00prci.h" > >Remove unused includes Will update in v3. > >> + >> >+/*************************************************************** >************* >> + * Platform definitions >> + >***************************************************************** >************/ >> + >> +/* Memory map */ >> +#define CCACHE_CTRL_ADDR _AC(0x2010000, UL) >> +#define CCACHE_CTRL_SIZE _AC(0x1000, UL) >> + >> +#define GPIO_CTRL_ADDR _AC(0x10060000, UL) >> +#define GPIO_CTRL_SIZE _AC(0x1000, UL) > >GPIO_xyz defines are not used anywhere remove it. GPIO_CTRL_ADDR will be used by GPIO_REG() and GPIO_REG will be used by VSC8541 PHY reset sequence (spl.c) > >> + >> +#define PHYSICAL_FILTER_CTRL_ADDR _AC(0x100b8000, UL) >> +#define PHYSICAL_FILTER_CTRL_SIZE _AC(0x1000, UL) >> + >> +#define UART0_CTRL_ADDR _AC(0x10010000, UL) >> +#define UART0_CTRL_SIZE _AC(0x1000, UL) >> +#define UART1_CTRL_ADDR _AC(0x10011000, UL) >> +#define UART1_CTRL_SIZE _AC(0x1000, UL) >> +#ifndef UART_CTRL_ADDR >> +#define UART_CTRL_ADDR UART0_CTRL_ADDR >> +#endif >> +#ifndef UART_CTRL_SIZE >> +#define UART_CTRL_SIZE UART0_CTRL_SIZE >> +#endif > >These UARTx_<xyz> defines can be removed if we can get rid of >UART clock scaling from init_clk_and_ddr(). The rationale is that >UART driver of U-Boot is supposed to set correct divider values >based on current clk setting so we don't need to do UART clock >scaling in init_clk_and_ddr() UART clock scaling can be removed from init_clk_and_ddr(), I will check and update this in v3. > >> +#define UX00DDR_CTRL_ADDR _AC(0x100b0000, UL) >> +#define UX00DDR_CTRL_SIZE _AC(0x4000, UL) >> +#define UX00PRCI_CTRL_ADDR _AC(0x10000000, UL) >> +#define UX00PRCI_CTRL_SIZE _AC(0x1000, UL) >> + >> +/* Helper functions */ >> +#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i))) >> + >> +#define UX00PRCI_REG(offset) \ >> + _REG32(UX00PRCI_CTRL_ADDR, \ >> + offset) >> +#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset) >> +#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset) > >Remove GPIO_REG() and UART0_REG() as well. Will remove UART0_REG() but GPIO_REG() used by VSC8541 PHY reset sequence (spl.c) > >> + >> +#endif /* FU540_MEMORY_MAP */ >> diff --git a/board/sifive/fu540/regconfig-ctl.h >b/board/sifive/fu540/regconfig-ctl.h >> new file mode 100644 >> index 0000000000..19a52e7996 >> --- /dev/null >> +++ b/board/sifive/fu540/regconfig-ctl.h >> @@ -0,0 +1,274 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (c) 2019 SiFive, Inc >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> >> + */ >> + >> +#define DENALI_CTL_00_DATA 0x00000a00 >> +#define DENALI_CTL_01_DATA 0x00000000 >> +#define DENALI_CTL_02_DATA 0x00000000 >> +#define DENALI_CTL_03_DATA 0x00000000 >> +#define DENALI_CTL_04_DATA 0x00000000 >> +#define DENALI_CTL_05_DATA 0x00000000 >> +#define DENALI_CTL_06_DATA 0x0000000a >> +#define DENALI_CTL_07_DATA 0x0002d362 >> +#define DENALI_CTL_08_DATA 0x00071073 >> +#define DENALI_CTL_09_DATA 0x0a1c0255 >> +#define DENALI_CTL_10_DATA 0x1c1c0400 >> +#define DENALI_CTL_11_DATA 0x0404990b >> +#define DENALI_CTL_12_DATA 0x2b050405 >> +#define DENALI_CTL_13_DATA 0x0e0c081e >> +#define DENALI_CTL_14_DATA 0x08090914 >> +#define DENALI_CTL_15_DATA 0x00fde718 >> +#define DENALI_CTL_16_DATA 0x00180a05 >> +#define DENALI_CTL_17_DATA 0x008b130e >> +#define DENALI_CTL_18_DATA 0x01000118 >> +#define DENALI_CTL_19_DATA 0x0e032101 >> +#define DENALI_CTL_20_DATA 0x00000000 >> +#define DENALI_CTL_21_DATA 0x00000101 >> +#define DENALI_CTL_22_DATA 0x00000000 >> +#define DENALI_CTL_23_DATA 0x0a000000 >> +#define DENALI_CTL_24_DATA 0x00000000 >> +#define DENALI_CTL_25_DATA 0x01450100 >> +#define DENALI_CTL_26_DATA 0x00001c36 >> +#define DENALI_CTL_27_DATA 0x00000005 >> +#define DENALI_CTL_28_DATA 0x00170006 >> +#define DENALI_CTL_29_DATA 0x014e0300 >> +#define DENALI_CTL_30_DATA 0x03010000 >> +#define DENALI_CTL_31_DATA 0x000a0e00 >> +#define DENALI_CTL_32_DATA 0x04030200 >> +#define DENALI_CTL_33_DATA 0x0000031f >> +#define DENALI_CTL_34_DATA 0x00070004 >> +#define DENALI_CTL_35_DATA 0x00000000 >> +#define DENALI_CTL_36_DATA 0x00000000 >> +#define DENALI_CTL_37_DATA 0x00000000 >> +#define DENALI_CTL_38_DATA 0x00000000 >> +#define DENALI_CTL_39_DATA 0x00000000 >> +#define DENALI_CTL_40_DATA 0x00000000 >> +#define DENALI_CTL_41_DATA 0x00000000 >> +#define DENALI_CTL_42_DATA 0x00000000 >> +#define DENALI_CTL_43_DATA 0x00000000 >> +#define DENALI_CTL_44_DATA 0x00000000 >> +#define DENALI_CTL_45_DATA 0x00000000 >> +#define DENALI_CTL_46_DATA 0x00000000 >> +#define DENALI_CTL_47_DATA 0x00000000 >> +#define DENALI_CTL_48_DATA 0x00000000 >> +#define DENALI_CTL_49_DATA 0x00000000 >> +#define DENALI_CTL_50_DATA 0x00000000 >> +#define DENALI_CTL_51_DATA 0x00000000 >> +#define DENALI_CTL_52_DATA 0x00000000 >> +#define DENALI_CTL_53_DATA 0x00000000 >> +#define DENALI_CTL_54_DATA 0x00000000 >> +#define DENALI_CTL_55_DATA 0x00000000 >> +#define DENALI_CTL_56_DATA 0x00000000 >> +#define DENALI_CTL_57_DATA 0x00000000 >> +#define DENALI_CTL_58_DATA 0x00000000 >> +#define DENALI_CTL_59_DATA 0x00000000 >> +#define DENALI_CTL_60_DATA 0x00000424 >> +#define DENALI_CTL_61_DATA 0x00000201 >> +#define DENALI_CTL_62_DATA 0x00001008 >> +#define DENALI_CTL_63_DATA 0x00000000 >> +#define DENALI_CTL_64_DATA 0x00000200 >> +#define DENALI_CTL_65_DATA 0x00000000 >> +#define DENALI_CTL_66_DATA 0x00000481 >> +#define DENALI_CTL_67_DATA 0x00000400 >> +#define DENALI_CTL_68_DATA 0x00000424 >> +#define DENALI_CTL_69_DATA 0x00000201 >> +#define DENALI_CTL_70_DATA 0x00001008 >> +#define DENALI_CTL_71_DATA 0x00000000 >> +#define DENALI_CTL_72_DATA 0x00000200 >> +#define DENALI_CTL_73_DATA 0x00000000 >> +#define DENALI_CTL_74_DATA 0x00000481 >> +#define DENALI_CTL_75_DATA 0x00000400 >> +#define DENALI_CTL_76_DATA 0x01010000 >> +#define DENALI_CTL_77_DATA 0x00000000 >> +#define DENALI_CTL_78_DATA 0x00000000 >> +#define DENALI_CTL_79_DATA 0x00000000 >> +#define DENALI_CTL_80_DATA 0x00000000 >> +#define DENALI_CTL_81_DATA 0x00000000 >> +#define DENALI_CTL_82_DATA 0x00000000 >> +#define DENALI_CTL_83_DATA 0x00000000 >> +#define DENALI_CTL_84_DATA 0x00000000 >> +#define DENALI_CTL_85_DATA 0x00000000 >> +#define DENALI_CTL_86_DATA 0x00000000 >> +#define DENALI_CTL_87_DATA 0x00000000 >> +#define DENALI_CTL_88_DATA 0x00000000 >> +#define DENALI_CTL_89_DATA 0x00000000 >> +#define DENALI_CTL_90_DATA 0x00000000 >> +#define DENALI_CTL_91_DATA 0x00000000 >> +#define DENALI_CTL_92_DATA 0x00000000 >> +#define DENALI_CTL_93_DATA 0x00000000 >> +#define DENALI_CTL_94_DATA 0x00000000 >> +#define DENALI_CTL_95_DATA 0x00000000 >> +#define DENALI_CTL_96_DATA 0x00000000 >> +#define DENALI_CTL_97_DATA 0x00000000 >> +#define DENALI_CTL_98_DATA 0x00000000 >> +#define DENALI_CTL_99_DATA 0x00000000 >> +#define DENALI_CTL_100_DATA 0x00000000 >> +#define DENALI_CTL_101_DATA 0x00000000 >> +#define DENALI_CTL_102_DATA 0x00000000 >> +#define DENALI_CTL_103_DATA 0x00000000 >> +#define DENALI_CTL_104_DATA 0x00000000 >> +#define DENALI_CTL_105_DATA 0x00000003 >> +#define DENALI_CTL_106_DATA 0x00000000 >> +#define DENALI_CTL_107_DATA 0x00000000 >> +#define DENALI_CTL_108_DATA 0x00000000 >> +#define DENALI_CTL_109_DATA 0x00000000 >> +#define DENALI_CTL_110_DATA 0x01000000 >> +#define DENALI_CTL_111_DATA 0x00040000 >> +#define DENALI_CTL_112_DATA 0x00800200 >> +#define DENALI_CTL_113_DATA 0x00000200 >> +#define DENALI_CTL_114_DATA 0x00000040 >> +#define DENALI_CTL_115_DATA 0x01000100 >> +#define DENALI_CTL_116_DATA 0x0a000002 >> +#define DENALI_CTL_117_DATA 0x0101ffff >> +#define DENALI_CTL_118_DATA 0x01010101 >> +#define DENALI_CTL_119_DATA 0x01010101 >> +#define DENALI_CTL_120_DATA 0x0000010b >> +#define DENALI_CTL_121_DATA 0x00000c01 >> +#define DENALI_CTL_122_DATA 0x00000000 >> +#define DENALI_CTL_123_DATA 0x00000000 >> +#define DENALI_CTL_124_DATA 0x00000000 >> +#define DENALI_CTL_125_DATA 0x00000000 >> +#define DENALI_CTL_126_DATA 0x00030300 >> +#define DENALI_CTL_127_DATA 0x00000000 >> +#define DENALI_CTL_128_DATA 0x00010001 >> +#define DENALI_CTL_129_DATA 0x00000000 >> +#define DENALI_CTL_130_DATA 0x00000000 >> +#define DENALI_CTL_131_DATA 0x00000000 >> +#define DENALI_CTL_132_DATA 0x00000000 >> +#define DENALI_CTL_133_DATA 0x00000000 >> +#define DENALI_CTL_134_DATA 0x00000000 >> +#define DENALI_CTL_135_DATA 0x00000000 >> +#define DENALI_CTL_136_DATA 0x00000000 >> +#define DENALI_CTL_137_DATA 0x00000000 >> +#define DENALI_CTL_138_DATA 0x00000000 >> +#define DENALI_CTL_139_DATA 0x00000000 >> +#define DENALI_CTL_140_DATA 0x00000000 >> +#define DENALI_CTL_141_DATA 0x00000000 >> +#define DENALI_CTL_142_DATA 0x00000000 >> +#define DENALI_CTL_143_DATA 0x00000000 >> +#define DENALI_CTL_144_DATA 0x00000000 >> +#define DENALI_CTL_145_DATA 0x00000000 >> +#define DENALI_CTL_146_DATA 0x00000000 >> +#define DENALI_CTL_147_DATA 0x00000000 >> +#define DENALI_CTL_148_DATA 0x00000000 >> +#define DENALI_CTL_149_DATA 0x00000000 >> +#define DENALI_CTL_150_DATA 0x00000000 >> +#define DENALI_CTL_151_DATA 0x00000000 >> +#define DENALI_CTL_152_DATA 0x00000000 >> +#define DENALI_CTL_153_DATA 0x00000000 >> +#define DENALI_CTL_154_DATA 0x00000000 >> +#define DENALI_CTL_155_DATA 0x00000000 >> +#define DENALI_CTL_156_DATA 0x00000000 >> +#define DENALI_CTL_157_DATA 0x00000000 >> +#define DENALI_CTL_158_DATA 0x00000000 >> +#define DENALI_CTL_159_DATA 0x00000000 >> +#define DENALI_CTL_160_DATA 0x00000000 >> +#define DENALI_CTL_161_DATA 0x02010102 >> +#define DENALI_CTL_162_DATA 0x0107070d >> +#define DENALI_CTL_163_DATA 0x04040400 >> +#define DENALI_CTL_164_DATA 0x03000503 >> +#define DENALI_CTL_165_DATA 0x00000000 >> +#define DENALI_CTL_166_DATA 0x00000000 >> +#define DENALI_CTL_167_DATA 0x00000000 >> +#define DENALI_CTL_168_DATA 0x00000000 >> +#define DENALI_CTL_169_DATA 0x280d0000 >> +#define DENALI_CTL_170_DATA 0x01000000 >> +#define DENALI_CTL_171_DATA 0x00000000 >> +#define DENALI_CTL_172_DATA 0x00010001 >> +#define DENALI_CTL_173_DATA 0x00000000 >> +#define DENALI_CTL_174_DATA 0x00000000 >> +#define DENALI_CTL_175_DATA 0x00000000 >> +#define DENALI_CTL_176_DATA 0x00000000 >> +#define DENALI_CTL_177_DATA 0x00000000 >> +#define DENALI_CTL_178_DATA 0x00000000 >> +#define DENALI_CTL_179_DATA 0x00000000 >> +#define DENALI_CTL_180_DATA 0x00000000 >> +#define DENALI_CTL_181_DATA 0x01000000 >> +#define DENALI_CTL_182_DATA 0x00000001 >> +#define DENALI_CTL_183_DATA 0x00000100 >> +#define DENALI_CTL_184_DATA 0x00000101 >> +#define DENALI_CTL_185_DATA 0x67676701 >> +#define DENALI_CTL_186_DATA 0x67676767 >> +#define DENALI_CTL_187_DATA 0x67676767 >> +#define DENALI_CTL_188_DATA 0x67676767 >> +#define DENALI_CTL_189_DATA 0x67676767 >> +#define DENALI_CTL_190_DATA 0x67676767 >> +#define DENALI_CTL_191_DATA 0x67676767 >> +#define DENALI_CTL_192_DATA 0x67676767 >> +#define DENALI_CTL_193_DATA 0x67676767 >> +#define DENALI_CTL_194_DATA 0x01000067 >> +#define DENALI_CTL_195_DATA 0x00000001 >> +#define DENALI_CTL_196_DATA 0x00000101 >> +#define DENALI_CTL_197_DATA 0x00000000 >> +#define DENALI_CTL_198_DATA 0x00000000 >> +#define DENALI_CTL_199_DATA 0x00000000 >> +#define DENALI_CTL_200_DATA 0x00000000 >> +#define DENALI_CTL_201_DATA 0x00000000 >> +#define DENALI_CTL_202_DATA 0x00000000 >> +#define DENALI_CTL_203_DATA 0x00000000 >> +#define DENALI_CTL_204_DATA 0x00000000 >> +#define DENALI_CTL_205_DATA 0x00000000 >> +#define DENALI_CTL_206_DATA 0x00000000 >> +#define DENALI_CTL_207_DATA 0x00000000 >> +#define DENALI_CTL_208_DATA 0x00000001 >> +#define DENALI_CTL_209_DATA 0x00000000 >> +#define DENALI_CTL_210_DATA 0x007fffff >> +#define DENALI_CTL_211_DATA 0x00000000 >> +#define DENALI_CTL_212_DATA 0x007fffff >> +#define DENALI_CTL_213_DATA 0x00000000 >> +#define DENALI_CTL_214_DATA 0x007fffff >> +#define DENALI_CTL_215_DATA 0x00000000 >> +#define DENALI_CTL_216_DATA 0x007fffff >> +#define DENALI_CTL_217_DATA 0x00000000 >> +#define DENALI_CTL_218_DATA 0x007fffff >> +#define DENALI_CTL_219_DATA 0x00000000 >> +#define DENALI_CTL_220_DATA 0x007fffff >> +#define DENALI_CTL_221_DATA 0x00000000 >> +#define DENALI_CTL_222_DATA 0x007fffff >> +#define DENALI_CTL_223_DATA 0x00000000 >> +#define DENALI_CTL_224_DATA 0x037fffff >> +#define DENALI_CTL_225_DATA 0xffffffff >> +#define DENALI_CTL_226_DATA 0x000f000f >> +#define DENALI_CTL_227_DATA 0x00ffff03 >> +#define DENALI_CTL_228_DATA 0x000fffff >> +#define DENALI_CTL_229_DATA 0x0003000f >> +#define DENALI_CTL_230_DATA 0xffffffff >> +#define DENALI_CTL_231_DATA 0x000f000f >> +#define DENALI_CTL_232_DATA 0x00ffff03 >> +#define DENALI_CTL_233_DATA 0x000fffff >> +#define DENALI_CTL_234_DATA 0x0003000f >> +#define DENALI_CTL_235_DATA 0xffffffff >> +#define DENALI_CTL_236_DATA 0x000f000f >> +#define DENALI_CTL_237_DATA 0x00ffff03 >> +#define DENALI_CTL_238_DATA 0x000fffff >> +#define DENALI_CTL_239_DATA 0x0003000f >> +#define DENALI_CTL_240_DATA 0xffffffff >> +#define DENALI_CTL_241_DATA 0x000f000f >> +#define DENALI_CTL_242_DATA 0x00ffff03 >> +#define DENALI_CTL_243_DATA 0x000fffff >> +#define DENALI_CTL_244_DATA 0x6407000f >> +#define DENALI_CTL_245_DATA 0x01640001 >> +#define DENALI_CTL_246_DATA 0x00000000 >> +#define DENALI_CTL_247_DATA 0x00000000 >> +#define DENALI_CTL_248_DATA 0x00001700 >> +#define DENALI_CTL_249_DATA 0x00386c05 >> +#define DENALI_CTL_250_DATA 0x02000200 >> +#define DENALI_CTL_251_DATA 0x02000200 >> +#define DENALI_CTL_252_DATA 0x0000386c >> +#define DENALI_CTL_253_DATA 0x00023438 >> +#define DENALI_CTL_254_DATA 0x02020d10 >> +#define DENALI_CTL_255_DATA 0x00140303 >> +#define DENALI_CTL_256_DATA 0x00000000 >> +#define DENALI_CTL_257_DATA 0x00000000 >> +#define DENALI_CTL_258_DATA 0x00001403 >> +#define DENALI_CTL_259_DATA 0x00000000 >> +#define DENALI_CTL_260_DATA 0x00000000 >> +#define DENALI_CTL_261_DATA 0x00000000 >> +#define DENALI_CTL_262_DATA 0x00000000 >> +#define DENALI_CTL_263_DATA 0x0d010000 >> +#define DENALI_CTL_264_DATA 0x00000008 >> diff --git a/board/sifive/fu540/regconfig-phy.h >b/board/sifive/fu540/regconfig-phy.h >> new file mode 100644 >> index 0000000000..3450aecdf1 >> --- /dev/null >> +++ b/board/sifive/fu540/regconfig-phy.h >> @@ -0,0 +1,1224 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (c) 2019 SiFive, Inc >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> >> + */ >> + >> +#define DENALI_PHY_00_DATA 0x31706542 >> +#define DENALI_PHY_01_DATA 0x0004c008 >> +#define DENALI_PHY_02_DATA 0x000000da >> +#define DENALI_PHY_03_DATA 0x00000000 >> +#define DENALI_PHY_04_DATA 0x00000000 >> +#define DENALI_PHY_05_DATA 0x00010000 >> +#define DENALI_PHY_06_DATA 0x01DDDD90 >> +#define DENALI_PHY_07_DATA 0x01DDDD90 >> +#define DENALI_PHY_08_DATA 0x01030000 >> +#define DENALI_PHY_09_DATA 0x01000000 >> +#define DENALI_PHY_10_DATA 0x00c00000 >> +#define DENALI_PHY_11_DATA 0x00000007 >> +#define DENALI_PHY_12_DATA 0x00000000 >> +#define DENALI_PHY_13_DATA 0x00000000 >> +#define DENALI_PHY_14_DATA 0x04000408 >> +#define DENALI_PHY_15_DATA 0x00000408 >> +#define DENALI_PHY_16_DATA 0x00e4e400 >> +#define DENALI_PHY_17_DATA 0x00000000 >> +#define DENALI_PHY_18_DATA 0x00000000 >> +#define DENALI_PHY_19_DATA 0x00000000 >> +#define DENALI_PHY_20_DATA 0x00000000 >> +#define DENALI_PHY_21_DATA 0x00000000 >> +#define DENALI_PHY_22_DATA 0x00000000 >> +#define DENALI_PHY_23_DATA 0x00000000 >> +#define DENALI_PHY_24_DATA 0x00000000 >> +#define DENALI_PHY_25_DATA 0x00000000 >> +#define DENALI_PHY_26_DATA 0x00000000 >> +#define DENALI_PHY_27_DATA 0x00000000 >> +#define DENALI_PHY_28_DATA 0x00000000 >> +#define DENALI_PHY_29_DATA 0x00000000 >> +#define DENALI_PHY_30_DATA 0x00000000 >> +#define DENALI_PHY_31_DATA 0x00000000 >> +#define DENALI_PHY_32_DATA 0x00000000 >> +#define DENALI_PHY_33_DATA 0x00200000 >> +#define DENALI_PHY_34_DATA 0x00000000 >> +#define DENALI_PHY_35_DATA 0x00000000 >> +#define DENALI_PHY_36_DATA 0x00000000 >> +#define DENALI_PHY_37_DATA 0x00000000 >> +#define DENALI_PHY_38_DATA 0x00000000 >> +#define DENALI_PHY_39_DATA 0x00000000 >> +#define DENALI_PHY_40_DATA 0x02800280 >> +#define DENALI_PHY_41_DATA 0x02800280 >> +#define DENALI_PHY_42_DATA 0x02800280 >> +#define DENALI_PHY_43_DATA 0x02800280 >> +#define DENALI_PHY_44_DATA 0x00000280 >> +#define DENALI_PHY_45_DATA 0x00000000 >> +#define DENALI_PHY_46_DATA 0x00000000 >> +#define DENALI_PHY_47_DATA 0x00000000 >> +#define DENALI_PHY_48_DATA 0x00000000 >> +#define DENALI_PHY_49_DATA 0x00000000 >> +#define DENALI_PHY_50_DATA 0x00800080 >> +#define DENALI_PHY_51_DATA 0x00800080 >> +#define DENALI_PHY_52_DATA 0x00800080 >> +#define DENALI_PHY_53_DATA 0x00800080 >> +#define DENALI_PHY_54_DATA 0x00800080 >> +#define DENALI_PHY_55_DATA 0x00800080 >> +#define DENALI_PHY_56_DATA 0x00800080 >> +#define DENALI_PHY_57_DATA 0x00800080 >> +#define DENALI_PHY_58_DATA 0x00800080 >> +#define DENALI_PHY_59_DATA 0x000100da >> +#define DENALI_PHY_60_DATA 0x01000200 >> +#define DENALI_PHY_61_DATA 0x00000000 >> +#define DENALI_PHY_62_DATA 0x00000000 >> +#define DENALI_PHY_63_DATA 0x00000002 >> +#define DENALI_PHY_64_DATA 0x51313152 >> +#define DENALI_PHY_65_DATA 0x80013130 >> +#define DENALI_PHY_66_DATA 0x02000080 >> +#define DENALI_PHY_67_DATA 0x00100001 >> +#define DENALI_PHY_68_DATA 0x0c064208 >> +#define DENALI_PHY_69_DATA 0x000f0c0f >> +#define DENALI_PHY_70_DATA 0x01000140 >> +#define DENALI_PHY_71_DATA 0x0000000c >> +#define DENALI_PHY_72_DATA 0x00000000 >> +#define DENALI_PHY_73_DATA 0x00000000 >> +#define DENALI_PHY_74_DATA 0x00000000 >> +#define DENALI_PHY_75_DATA 0x00000000 >> +#define DENALI_PHY_76_DATA 0x00000000 >> +#define DENALI_PHY_77_DATA 0x00000000 >> +#define DENALI_PHY_78_DATA 0x00000000 >> +#define DENALI_PHY_79_DATA 0x00000000 >> +#define DENALI_PHY_80_DATA 0x00000000 >> +#define DENALI_PHY_81_DATA 0x00000000 >> +#define DENALI_PHY_82_DATA 0x00000000 >> +#define DENALI_PHY_83_DATA 0x00000000 >> +#define DENALI_PHY_84_DATA 0x00000000 >> +#define DENALI_PHY_85_DATA 0x00000000 >> +#define DENALI_PHY_86_DATA 0x00000000 >> +#define DENALI_PHY_87_DATA 0x00000000 >> +#define DENALI_PHY_88_DATA 0x00000000 >> +#define DENALI_PHY_89_DATA 0x00000000 >> +#define DENALI_PHY_90_DATA 0x00000000 >> +#define DENALI_PHY_91_DATA 0x00000000 >> +#define DENALI_PHY_92_DATA 0x00000000 >> +#define DENALI_PHY_93_DATA 0x00000000 >> +#define DENALI_PHY_94_DATA 0x00000000 >> +#define DENALI_PHY_95_DATA 0x00000000 >> +#define DENALI_PHY_96_DATA 0x00000000 >> +#define DENALI_PHY_97_DATA 0x00000000 >> +#define DENALI_PHY_98_DATA 0x00000000 >> +#define DENALI_PHY_99_DATA 0x00000000 >> +#define DENALI_PHY_100_DATA 0x00000000 >> +#define DENALI_PHY_101_DATA 0x00000000 >> +#define DENALI_PHY_102_DATA 0x00000000 >> +#define DENALI_PHY_103_DATA 0x00000000 >> +#define DENALI_PHY_104_DATA 0x00000000 >> +#define DENALI_PHY_105_DATA 0x00000000 >> +#define DENALI_PHY_106_DATA 0x00000000 >> +#define DENALI_PHY_107_DATA 0x00000000 >> +#define DENALI_PHY_108_DATA 0x00000000 >> +#define DENALI_PHY_109_DATA 0x00000000 >> +#define DENALI_PHY_110_DATA 0x00000000 >> +#define DENALI_PHY_111_DATA 0x00000000 >> +#define DENALI_PHY_112_DATA 0x00000000 >> +#define DENALI_PHY_113_DATA 0x00000000 >> +#define DENALI_PHY_114_DATA 0x00000000 >> +#define DENALI_PHY_115_DATA 0x00000000 >> +#define DENALI_PHY_116_DATA 0x00000000 >> +#define DENALI_PHY_117_DATA 0x00000000 >> +#define DENALI_PHY_118_DATA 0x00000000 >> +#define DENALI_PHY_119_DATA 0x00000000 >> +#define DENALI_PHY_120_DATA 0x00000000 >> +#define DENALI_PHY_121_DATA 0x00000000 >> +#define DENALI_PHY_122_DATA 0x00000000 >> +#define DENALI_PHY_123_DATA 0x00000000 >> +#define DENALI_PHY_124_DATA 0x00000000 >> +#define DENALI_PHY_125_DATA 0x00000000 >> +#define DENALI_PHY_126_DATA 0x00000000 >> +#define DENALI_PHY_127_DATA 0x00000000 >> +#define DENALI_PHY_128_DATA 0x40263571 >> +#define DENALI_PHY_129_DATA 0x0004c008 >> +#define DENALI_PHY_130_DATA 0x000000da >> +#define DENALI_PHY_131_DATA 0x00000000 >> +#define DENALI_PHY_132_DATA 0x00000000 >> +#define DENALI_PHY_133_DATA 0x00010000 >> +#define DENALI_PHY_134_DATA 0x01DDDD90 >> +#define DENALI_PHY_135_DATA 0x01DDDD90 >> +#define DENALI_PHY_136_DATA 0x01030000 >> +#define DENALI_PHY_137_DATA 0x01000000 >> +#define DENALI_PHY_138_DATA 0x00c00000 >> +#define DENALI_PHY_139_DATA 0x00000007 >> +#define DENALI_PHY_140_DATA 0x00000000 >> +#define DENALI_PHY_141_DATA 0x00000000 >> +#define DENALI_PHY_142_DATA 0x04000408 >> +#define DENALI_PHY_143_DATA 0x00000408 >> +#define DENALI_PHY_144_DATA 0x00e4e400 >> +#define DENALI_PHY_145_DATA 0x00000000 >> +#define DENALI_PHY_146_DATA 0x00000000 >> +#define DENALI_PHY_147_DATA 0x00000000 >> +#define DENALI_PHY_148_DATA 0x00000000 >> +#define DENALI_PHY_149_DATA 0x00000000 >> +#define DENALI_PHY_150_DATA 0x00000000 >> +#define DENALI_PHY_151_DATA 0x00000000 >> +#define DENALI_PHY_152_DATA 0x00000000 >> +#define DENALI_PHY_153_DATA 0x00000000 >> +#define DENALI_PHY_154_DATA 0x00000000 >> +#define DENALI_PHY_155_DATA 0x00000000 >> +#define DENALI_PHY_156_DATA 0x00000000 >> +#define DENALI_PHY_157_DATA 0x00000000 >> +#define DENALI_PHY_158_DATA 0x00000000 >> +#define DENALI_PHY_159_DATA 0x00000000 >> +#define DENALI_PHY_160_DATA 0x00000000 >> +#define DENALI_PHY_161_DATA 0x00200000 >> +#define DENALI_PHY_162_DATA 0x00000000 >> +#define DENALI_PHY_163_DATA 0x00000000 >> +#define DENALI_PHY_164_DATA 0x00000000 >> +#define DENALI_PHY_165_DATA 0x00000000 >> +#define DENALI_PHY_166_DATA 0x00000000 >> +#define DENALI_PHY_167_DATA 0x00000000 >> +#define DENALI_PHY_168_DATA 0x02800280 >> +#define DENALI_PHY_169_DATA 0x02800280 >> +#define DENALI_PHY_170_DATA 0x02800280 >> +#define DENALI_PHY_171_DATA 0x02800280 >> +#define DENALI_PHY_172_DATA 0x00000280 >> +#define DENALI_PHY_173_DATA 0x00000000 >> +#define DENALI_PHY_174_DATA 0x00000000 >> +#define DENALI_PHY_175_DATA 0x00000000 >> +#define DENALI_PHY_176_DATA 0x00000000 >> +#define DENALI_PHY_177_DATA 0x00000000 >> +#define DENALI_PHY_178_DATA 0x00800080 >> +#define DENALI_PHY_179_DATA 0x00800080 >> +#define DENALI_PHY_180_DATA 0x00800080 >> +#define DENALI_PHY_181_DATA 0x00800080 >> +#define DENALI_PHY_182_DATA 0x00800080 >> +#define DENALI_PHY_183_DATA 0x00800080 >> +#define DENALI_PHY_184_DATA 0x00800080 >> +#define DENALI_PHY_185_DATA 0x00800080 >> +#define DENALI_PHY_186_DATA 0x00800080 >> +#define DENALI_PHY_187_DATA 0x000100da >> +#define DENALI_PHY_188_DATA 0x01000200 >> +#define DENALI_PHY_189_DATA 0x00000000 >> +#define DENALI_PHY_190_DATA 0x00000000 >> +#define DENALI_PHY_191_DATA 0x00000002 >> +#define DENALI_PHY_192_DATA 0x51313152 >> +#define DENALI_PHY_193_DATA 0x80013130 >> +#define DENALI_PHY_194_DATA 0x02000080 >> +#define DENALI_PHY_195_DATA 0x00100001 >> +#define DENALI_PHY_196_DATA 0x0c064208 >> +#define DENALI_PHY_197_DATA 0x000f0c0f >> +#define DENALI_PHY_198_DATA 0x01000140 >> +#define DENALI_PHY_199_DATA 0x0000000c >> +#define DENALI_PHY_200_DATA 0x00000000 >> +#define DENALI_PHY_201_DATA 0x00000000 >> +#define DENALI_PHY_202_DATA 0x00000000 >> +#define DENALI_PHY_203_DATA 0x00000000 >> +#define DENALI_PHY_204_DATA 0x00000000 >> +#define DENALI_PHY_205_DATA 0x00000000 >> +#define DENALI_PHY_206_DATA 0x00000000 >> +#define DENALI_PHY_207_DATA 0x00000000 >> +#define DENALI_PHY_208_DATA 0x00000000 >> +#define DENALI_PHY_209_DATA 0x00000000 >> +#define DENALI_PHY_210_DATA 0x00000000 >> +#define DENALI_PHY_211_DATA 0x00000000 >> +#define DENALI_PHY_212_DATA 0x00000000 >> +#define DENALI_PHY_213_DATA 0x00000000 >> +#define DENALI_PHY_214_DATA 0x00000000 >> +#define DENALI_PHY_215_DATA 0x00000000 >> +#define DENALI_PHY_216_DATA 0x00000000 >> +#define DENALI_PHY_217_DATA 0x00000000 >> +#define DENALI_PHY_218_DATA 0x00000000 >> +#define DENALI_PHY_219_DATA 0x00000000 >> +#define DENALI_PHY_220_DATA 0x00000000 >> +#define DENALI_PHY_221_DATA 0x00000000 >> +#define DENALI_PHY_222_DATA 0x00000000 >> +#define DENALI_PHY_223_DATA 0x00000000 >> +#define DENALI_PHY_224_DATA 0x00000000 >> +#define DENALI_PHY_225_DATA 0x00000000 >> +#define DENALI_PHY_226_DATA 0x00000000 >> +#define DENALI_PHY_227_DATA 0x00000000 >> +#define DENALI_PHY_228_DATA 0x00000000 >> +#define DENALI_PHY_229_DATA 0x00000000 >> +#define DENALI_PHY_230_DATA 0x00000000 >> +#define DENALI_PHY_231_DATA 0x00000000 >> +#define DENALI_PHY_232_DATA 0x00000000 >> +#define DENALI_PHY_233_DATA 0x00000000 >> +#define DENALI_PHY_234_DATA 0x00000000 >> +#define DENALI_PHY_235_DATA 0x00000000 >> +#define DENALI_PHY_236_DATA 0x00000000 >> +#define DENALI_PHY_237_DATA 0x00000000 >> +#define DENALI_PHY_238_DATA 0x00000000 >> +#define DENALI_PHY_239_DATA 0x00000000 >> +#define DENALI_PHY_240_DATA 0x00000000 >> +#define DENALI_PHY_241_DATA 0x00000000 >> +#define DENALI_PHY_242_DATA 0x00000000 >> +#define DENALI_PHY_243_DATA 0x00000000 >> +#define DENALI_PHY_244_DATA 0x00000000 >> +#define DENALI_PHY_245_DATA 0x00000000 >> +#define DENALI_PHY_246_DATA 0x00000000 >> +#define DENALI_PHY_247_DATA 0x00000000 >> +#define DENALI_PHY_248_DATA 0x00000000 >> +#define DENALI_PHY_249_DATA 0x00000000 >> +#define DENALI_PHY_250_DATA 0x00000000 >> +#define DENALI_PHY_251_DATA 0x00000000 >> +#define DENALI_PHY_252_DATA 0x00000000 >> +#define DENALI_PHY_253_DATA 0x00000000 >> +#define DENALI_PHY_254_DATA 0x00000000 >> +#define DENALI_PHY_255_DATA 0x00000000 >> +#define DENALI_PHY_256_DATA 0x46052371 >> +#define DENALI_PHY_257_DATA 0x0004c008 >> +#define DENALI_PHY_258_DATA 0x000000da >> +#define DENALI_PHY_259_DATA 0x00000000 >> +#define DENALI_PHY_260_DATA 0x00000000 >> +#define DENALI_PHY_261_DATA 0x00010000 >> +#define DENALI_PHY_262_DATA 0x01DDDD90 >> +#define DENALI_PHY_263_DATA 0x01DDDD90 >> +#define DENALI_PHY_264_DATA 0x01030000 >> +#define DENALI_PHY_265_DATA 0x01000000 >> +#define DENALI_PHY_266_DATA 0x00c00000 >> +#define DENALI_PHY_267_DATA 0x00000007 >> +#define DENALI_PHY_268_DATA 0x00000000 >> +#define DENALI_PHY_269_DATA 0x00000000 >> +#define DENALI_PHY_270_DATA 0x04000408 >> +#define DENALI_PHY_271_DATA 0x00000408 >> +#define DENALI_PHY_272_DATA 0x00e4e400 >> +#define DENALI_PHY_273_DATA 0x00000000 >> +#define DENALI_PHY_274_DATA 0x00000000 >> +#define DENALI_PHY_275_DATA 0x00000000 >> +#define DENALI_PHY_276_DATA 0x00000000 >> +#define DENALI_PHY_277_DATA 0x00000000 >> +#define DENALI_PHY_278_DATA 0x00000000 >> +#define DENALI_PHY_279_DATA 0x00000000 >> +#define DENALI_PHY_280_DATA 0x00000000 >> +#define DENALI_PHY_281_DATA 0x00000000 >> +#define DENALI_PHY_282_DATA 0x00000000 >> +#define DENALI_PHY_283_DATA 0x00000000 >> +#define DENALI_PHY_284_DATA 0x00000000 >> +#define DENALI_PHY_285_DATA 0x00000000 >> +#define DENALI_PHY_286_DATA 0x00000000 >> +#define DENALI_PHY_287_DATA 0x00000000 >> +#define DENALI_PHY_288_DATA 0x00000000 >> +#define DENALI_PHY_289_DATA 0x00200000 >> +#define DENALI_PHY_290_DATA 0x00000000 >> +#define DENALI_PHY_291_DATA 0x00000000 >> +#define DENALI_PHY_292_DATA 0x00000000 >> +#define DENALI_PHY_293_DATA 0x00000000 >> +#define DENALI_PHY_294_DATA 0x00000000 >> +#define DENALI_PHY_295_DATA 0x00000000 >> +#define DENALI_PHY_296_DATA 0x02800280 >> +#define DENALI_PHY_297_DATA 0x02800280 >> +#define DENALI_PHY_298_DATA 0x02800280 >> +#define DENALI_PHY_299_DATA 0x02800280 >> +#define DENALI_PHY_300_DATA 0x00000280 >> +#define DENALI_PHY_301_DATA 0x00000000 >> +#define DENALI_PHY_302_DATA 0x00000000 >> +#define DENALI_PHY_303_DATA 0x00000000 >> +#define DENALI_PHY_304_DATA 0x00000000 >> +#define DENALI_PHY_305_DATA 0x00000000 >> +#define DENALI_PHY_306_DATA 0x00800080 >> +#define DENALI_PHY_307_DATA 0x00800080 >> +#define DENALI_PHY_308_DATA 0x00800080 >> +#define DENALI_PHY_309_DATA 0x00800080 >> +#define DENALI_PHY_310_DATA 0x00800080 >> +#define DENALI_PHY_311_DATA 0x00800080 >> +#define DENALI_PHY_312_DATA 0x00800080 >> +#define DENALI_PHY_313_DATA 0x00800080 >> +#define DENALI_PHY_314_DATA 0x00800080 >> +#define DENALI_PHY_315_DATA 0x000100da >> +#define DENALI_PHY_316_DATA 0x00000200 >> +#define DENALI_PHY_317_DATA 0x00000000 >> +#define DENALI_PHY_318_DATA 0x00000000 >> +#define DENALI_PHY_319_DATA 0x00000002 >> +#define DENALI_PHY_320_DATA 0x51313152 >> +#define DENALI_PHY_321_DATA 0x80013130 >> +#define DENALI_PHY_322_DATA 0x02000080 >> +#define DENALI_PHY_323_DATA 0x00100001 >> +#define DENALI_PHY_324_DATA 0x0c064208 >> +#define DENALI_PHY_325_DATA 0x000f0c0f >> +#define DENALI_PHY_326_DATA 0x01000140 >> +#define DENALI_PHY_327_DATA 0x0000000c >> +#define DENALI_PHY_328_DATA 0x00000000 >> +#define DENALI_PHY_329_DATA 0x00000000 >> +#define DENALI_PHY_330_DATA 0x00000000 >> +#define DENALI_PHY_331_DATA 0x00000000 >> +#define DENALI_PHY_332_DATA 0x00000000 >> +#define DENALI_PHY_333_DATA 0x00000000 >> +#define DENALI_PHY_334_DATA 0x00000000 >> +#define DENALI_PHY_335_DATA 0x00000000 >> +#define DENALI_PHY_336_DATA 0x00000000 >> +#define DENALI_PHY_337_DATA 0x00000000 >> +#define DENALI_PHY_338_DATA 0x00000000 >> +#define DENALI_PHY_339_DATA 0x00000000 >> +#define DENALI_PHY_340_DATA 0x00000000 >> +#define DENALI_PHY_341_DATA 0x00000000 >> +#define DENALI_PHY_342_DATA 0x00000000 >> +#define DENALI_PHY_343_DATA 0x00000000 >> +#define DENALI_PHY_344_DATA 0x00000000 >> +#define DENALI_PHY_345_DATA 0x00000000 >> +#define DENALI_PHY_346_DATA 0x00000000 >> +#define DENALI_PHY_347_DATA 0x00000000 >> +#define DENALI_PHY_348_DATA 0x00000000 >> +#define DENALI_PHY_349_DATA 0x00000000 >> +#define DENALI_PHY_350_DATA 0x00000000 >> +#define DENALI_PHY_351_DATA 0x00000000 >> +#define DENALI_PHY_352_DATA 0x00000000 >> +#define DENALI_PHY_353_DATA 0x00000000 >> +#define DENALI_PHY_354_DATA 0x00000000 >> +#define DENALI_PHY_355_DATA 0x00000000 >> +#define DENALI_PHY_356_DATA 0x00000000 >> +#define DENALI_PHY_357_DATA 0x00000000 >> +#define DENALI_PHY_358_DATA 0x00000000 >> +#define DENALI_PHY_359_DATA 0x00000000 >> +#define DENALI_PHY_360_DATA 0x00000000 >> +#define DENALI_PHY_361_DATA 0x00000000 >> +#define DENALI_PHY_362_DATA 0x00000000 >> +#define DENALI_PHY_363_DATA 0x00000000 >> +#define DENALI_PHY_364_DATA 0x00000000 >> +#define DENALI_PHY_365_DATA 0x00000000 >> +#define DENALI_PHY_366_DATA 0x00000000 >> +#define DENALI_PHY_367_DATA 0x00000000 >> +#define DENALI_PHY_368_DATA 0x00000000 >> +#define DENALI_PHY_369_DATA 0x00000000 >> +#define DENALI_PHY_370_DATA 0x00000000 >> +#define DENALI_PHY_371_DATA 0x00000000 >> +#define DENALI_PHY_372_DATA 0x00000000 >> +#define DENALI_PHY_373_DATA 0x00000000 >> +#define DENALI_PHY_374_DATA 0x00000000 >> +#define DENALI_PHY_375_DATA 0x00000000 >> +#define DENALI_PHY_376_DATA 0x00000000 >> +#define DENALI_PHY_377_DATA 0x00000000 >> +#define DENALI_PHY_378_DATA 0x00000000 >> +#define DENALI_PHY_379_DATA 0x00000000 >> +#define DENALI_PHY_380_DATA 0x00000000 >> +#define DENALI_PHY_381_DATA 0x00000000 >> +#define DENALI_PHY_382_DATA 0x00000000 >> +#define DENALI_PHY_383_DATA 0x00000000 >> +#define DENALI_PHY_384_DATA 0x37654120 >> +#define DENALI_PHY_385_DATA 0x0004c008 >> +#define DENALI_PHY_386_DATA 0x000000da >> +#define DENALI_PHY_387_DATA 0x00000000 >> +#define DENALI_PHY_388_DATA 0x00000000 >> +#define DENALI_PHY_389_DATA 0x00010000 >> +#define DENALI_PHY_390_DATA 0x01DDDD90 >> +#define DENALI_PHY_391_DATA 0x01DDDD90 >> +#define DENALI_PHY_392_DATA 0x01030000 >> +#define DENALI_PHY_393_DATA 0x01000000 >> +#define DENALI_PHY_394_DATA 0x00c00000 >> +#define DENALI_PHY_395_DATA 0x00000007 >> +#define DENALI_PHY_396_DATA 0x00000000 >> +#define DENALI_PHY_397_DATA 0x00000000 >> +#define DENALI_PHY_398_DATA 0x04000408 >> +#define DENALI_PHY_399_DATA 0x00000408 >> +#define DENALI_PHY_400_DATA 0x00e4e400 >> +#define DENALI_PHY_401_DATA 0x00000000 >> +#define DENALI_PHY_402_DATA 0x00000000 >> +#define DENALI_PHY_403_DATA 0x00000000 >> +#define DENALI_PHY_404_DATA 0x00000000 >> +#define DENALI_PHY_405_DATA 0x00000000 >> +#define DENALI_PHY_406_DATA 0x00000000 >> +#define DENALI_PHY_407_DATA 0x00000000 >> +#define DENALI_PHY_408_DATA 0x00000000 >> +#define DENALI_PHY_409_DATA 0x00000000 >> +#define DENALI_PHY_410_DATA 0x00000000 >> +#define DENALI_PHY_411_DATA 0x00000000 >> +#define DENALI_PHY_412_DATA 0x00000000 >> +#define DENALI_PHY_413_DATA 0x00000000 >> +#define DENALI_PHY_414_DATA 0x00000000 >> +#define DENALI_PHY_415_DATA 0x00000000 >> +#define DENALI_PHY_416_DATA 0x00000000 >> +#define DENALI_PHY_417_DATA 0x00200000 >> +#define DENALI_PHY_418_DATA 0x00000000 >> +#define DENALI_PHY_419_DATA 0x00000000 >> +#define DENALI_PHY_420_DATA 0x00000000 >> +#define DENALI_PHY_421_DATA 0x00000000 >> +#define DENALI_PHY_422_DATA 0x00000000 >> +#define DENALI_PHY_423_DATA 0x00000000 >> +#define DENALI_PHY_424_DATA 0x02800280 >> +#define DENALI_PHY_425_DATA 0x02800280 >> +#define DENALI_PHY_426_DATA 0x02800280 >> +#define DENALI_PHY_427_DATA 0x02800280 >> +#define DENALI_PHY_428_DATA 0x00000280 >> +#define DENALI_PHY_429_DATA 0x00000000 >> +#define DENALI_PHY_430_DATA 0x00000000 >> +#define DENALI_PHY_431_DATA 0x00000000 >> +#define DENALI_PHY_432_DATA 0x00000000 >> +#define DENALI_PHY_433_DATA 0x00000000 >> +#define DENALI_PHY_434_DATA 0x00800080 >> +#define DENALI_PHY_435_DATA 0x00800080 >> +#define DENALI_PHY_436_DATA 0x00800080 >> +#define DENALI_PHY_437_DATA 0x00800080 >> +#define DENALI_PHY_438_DATA 0x00800080 >> +#define DENALI_PHY_439_DATA 0x00800080 >> +#define DENALI_PHY_440_DATA 0x00800080 >> +#define DENALI_PHY_441_DATA 0x00800080 >> +#define DENALI_PHY_442_DATA 0x00800080 >> +#define DENALI_PHY_443_DATA 0x000100da >> +#define DENALI_PHY_444_DATA 0x00000200 >> +#define DENALI_PHY_445_DATA 0x00000000 >> +#define DENALI_PHY_446_DATA 0x00000000 >> +#define DENALI_PHY_447_DATA 0x00000002 >> +#define DENALI_PHY_448_DATA 0x51313152 >> +#define DENALI_PHY_449_DATA 0x80013130 >> +#define DENALI_PHY_450_DATA 0x02000080 >> +#define DENALI_PHY_451_DATA 0x00100001 >> +#define DENALI_PHY_452_DATA 0x0c064208 >> +#define DENALI_PHY_453_DATA 0x000f0c0f >> +#define DENALI_PHY_454_DATA 0x01000140 >> +#define DENALI_PHY_455_DATA 0x0000000c >> +#define DENALI_PHY_456_DATA 0x00000000 >> +#define DENALI_PHY_457_DATA 0x00000000 >> +#define DENALI_PHY_458_DATA 0x00000000 >> +#define DENALI_PHY_459_DATA 0x00000000 >> +#define DENALI_PHY_460_DATA 0x00000000 >> +#define DENALI_PHY_461_DATA 0x00000000 >> +#define DENALI_PHY_462_DATA 0x00000000 >> +#define DENALI_PHY_463_DATA 0x00000000 >> +#define DENALI_PHY_464_DATA 0x00000000 >> +#define DENALI_PHY_465_DATA 0x00000000 >> +#define DENALI_PHY_466_DATA 0x00000000 >> +#define DENALI_PHY_467_DATA 0x00000000 >> +#define DENALI_PHY_468_DATA 0x00000000 >> +#define DENALI_PHY_469_DATA 0x00000000 >> +#define DENALI_PHY_470_DATA 0x00000000 >> +#define DENALI_PHY_471_DATA 0x00000000 >> +#define DENALI_PHY_472_DATA 0x00000000 >> +#define DENALI_PHY_473_DATA 0x00000000 >> +#define DENALI_PHY_474_DATA 0x00000000 >> +#define DENALI_PHY_475_DATA 0x00000000 >> +#define DENALI_PHY_476_DATA 0x00000000 >> +#define DENALI_PHY_477_DATA 0x00000000 >> +#define DENALI_PHY_478_DATA 0x00000000 >> +#define DENALI_PHY_479_DATA 0x00000000 >> +#define DENALI_PHY_480_DATA 0x00000000 >> +#define DENALI_PHY_481_DATA 0x00000000 >> +#define DENALI_PHY_482_DATA 0x00000000 >> +#define DENALI_PHY_483_DATA 0x00000000 >> +#define DENALI_PHY_484_DATA 0x00000000 >> +#define DENALI_PHY_485_DATA 0x00000000 >> +#define DENALI_PHY_486_DATA 0x00000000 >> +#define DENALI_PHY_487_DATA 0x00000000 >> +#define DENALI_PHY_488_DATA 0x00000000 >> +#define DENALI_PHY_489_DATA 0x00000000 >> +#define DENALI_PHY_490_DATA 0x00000000 >> +#define DENALI_PHY_491_DATA 0x00000000 >> +#define DENALI_PHY_492_DATA 0x00000000 >> +#define DENALI_PHY_493_DATA 0x00000000 >> +#define DENALI_PHY_494_DATA 0x00000000 >> +#define DENALI_PHY_495_DATA 0x00000000 >> +#define DENALI_PHY_496_DATA 0x00000000 >> +#define DENALI_PHY_497_DATA 0x00000000 >> +#define DENALI_PHY_498_DATA 0x00000000 >> +#define DENALI_PHY_499_DATA 0x00000000 >> +#define DENALI_PHY_500_DATA 0x00000000 >> +#define DENALI_PHY_501_DATA 0x00000000 >> +#define DENALI_PHY_502_DATA 0x00000000 >> +#define DENALI_PHY_503_DATA 0x00000000 >> +#define DENALI_PHY_504_DATA 0x00000000 >> +#define DENALI_PHY_505_DATA 0x00000000 >> +#define DENALI_PHY_506_DATA 0x00000000 >> +#define DENALI_PHY_507_DATA 0x00000000 >> +#define DENALI_PHY_508_DATA 0x00000000 >> +#define DENALI_PHY_509_DATA 0x00000000 >> +#define DENALI_PHY_510_DATA 0x00000000 >> +#define DENALI_PHY_511_DATA 0x00000000 >> +#define DENALI_PHY_512_DATA 0x24316750 >> +#define DENALI_PHY_513_DATA 0x0004c008 >> +#define DENALI_PHY_514_DATA 0x000000da >> +#define DENALI_PHY_515_DATA 0x00000000 >> +#define DENALI_PHY_516_DATA 0x00000000 >> +#define DENALI_PHY_517_DATA 0x00010000 >> +#define DENALI_PHY_518_DATA 0x01DDDD90 >> +#define DENALI_PHY_519_DATA 0x01DDDD90 >> +#define DENALI_PHY_520_DATA 0x01030000 >> +#define DENALI_PHY_521_DATA 0x01000000 >> +#define DENALI_PHY_522_DATA 0x00c00000 >> +#define DENALI_PHY_523_DATA 0x00000007 >> +#define DENALI_PHY_524_DATA 0x00000000 >> +#define DENALI_PHY_525_DATA 0x00000000 >> +#define DENALI_PHY_526_DATA 0x04000408 >> +#define DENALI_PHY_527_DATA 0x00000408 >> +#define DENALI_PHY_528_DATA 0x00e4e400 >> +#define DENALI_PHY_529_DATA 0x00000000 >> +#define DENALI_PHY_530_DATA 0x00000000 >> +#define DENALI_PHY_531_DATA 0x00000000 >> +#define DENALI_PHY_532_DATA 0x00000000 >> +#define DENALI_PHY_533_DATA 0x00000000 >> +#define DENALI_PHY_534_DATA 0x00000000 >> +#define DENALI_PHY_535_DATA 0x00000000 >> +#define DENALI_PHY_536_DATA 0x00000000 >> +#define DENALI_PHY_537_DATA 0x00000000 >> +#define DENALI_PHY_538_DATA 0x00000000 >> +#define DENALI_PHY_539_DATA 0x00000000 >> +#define DENALI_PHY_540_DATA 0x00000000 >> +#define DENALI_PHY_541_DATA 0x00000000 >> +#define DENALI_PHY_542_DATA 0x00000000 >> +#define DENALI_PHY_543_DATA 0x00000000 >> +#define DENALI_PHY_544_DATA 0x00000000 >> +#define DENALI_PHY_545_DATA 0x00200000 >> +#define DENALI_PHY_546_DATA 0x00000000 >> +#define DENALI_PHY_547_DATA 0x00000000 >> +#define DENALI_PHY_548_DATA 0x00000000 >> +#define DENALI_PHY_549_DATA 0x00000000 >> +#define DENALI_PHY_550_DATA 0x00000000 >> +#define DENALI_PHY_551_DATA 0x00000000 >> +#define DENALI_PHY_552_DATA 0x02800280 >> +#define DENALI_PHY_553_DATA 0x02800280 >> +#define DENALI_PHY_554_DATA 0x02800280 >> +#define DENALI_PHY_555_DATA 0x02800280 >> +#define DENALI_PHY_556_DATA 0x00000280 >> +#define DENALI_PHY_557_DATA 0x00000000 >> +#define DENALI_PHY_558_DATA 0x00000000 >> +#define DENALI_PHY_559_DATA 0x00000000 >> +#define DENALI_PHY_560_DATA 0x00000000 >> +#define DENALI_PHY_561_DATA 0x00000000 >> +#define DENALI_PHY_562_DATA 0x00800080 >> +#define DENALI_PHY_563_DATA 0x00800080 >> +#define DENALI_PHY_564_DATA 0x00800080 >> +#define DENALI_PHY_565_DATA 0x00800080 >> +#define DENALI_PHY_566_DATA 0x00800080 >> +#define DENALI_PHY_567_DATA 0x00800080 >> +#define DENALI_PHY_568_DATA 0x00800080 >> +#define DENALI_PHY_569_DATA 0x00800080 >> +#define DENALI_PHY_570_DATA 0x00800080 >> +#define DENALI_PHY_571_DATA 0x000100da >> +#define DENALI_PHY_572_DATA 0x00000200 >> +#define DENALI_PHY_573_DATA 0x00000000 >> +#define DENALI_PHY_574_DATA 0x00000000 >> +#define DENALI_PHY_575_DATA 0x00000002 >> +#define DENALI_PHY_576_DATA 0x51313152 >> +#define DENALI_PHY_577_DATA 0x80013130 >> +#define DENALI_PHY_578_DATA 0x02000080 >> +#define DENALI_PHY_579_DATA 0x00100001 >> +#define DENALI_PHY_580_DATA 0x0c064208 >> +#define DENALI_PHY_581_DATA 0x000f0c0f >> +#define DENALI_PHY_582_DATA 0x01000140 >> +#define DENALI_PHY_583_DATA 0x0000000c >> +#define DENALI_PHY_584_DATA 0x00000000 >> +#define DENALI_PHY_585_DATA 0x00000000 >> +#define DENALI_PHY_586_DATA 0x00000000 >> +#define DENALI_PHY_587_DATA 0x00000000 >> +#define DENALI_PHY_588_DATA 0x00000000 >> +#define DENALI_PHY_589_DATA 0x00000000 >> +#define DENALI_PHY_590_DATA 0x00000000 >> +#define DENALI_PHY_591_DATA 0x00000000 >> +#define DENALI_PHY_592_DATA 0x00000000 >> +#define DENALI_PHY_593_DATA 0x00000000 >> +#define DENALI_PHY_594_DATA 0x00000000 >> +#define DENALI_PHY_595_DATA 0x00000000 >> +#define DENALI_PHY_596_DATA 0x00000000 >> +#define DENALI_PHY_597_DATA 0x00000000 >> +#define DENALI_PHY_598_DATA 0x00000000 >> +#define DENALI_PHY_599_DATA 0x00000000 >> +#define DENALI_PHY_600_DATA 0x00000000 >> +#define DENALI_PHY_601_DATA 0x00000000 >> +#define DENALI_PHY_602_DATA 0x00000000 >> +#define DENALI_PHY_603_DATA 0x00000000 >> +#define DENALI_PHY_604_DATA 0x00000000 >> +#define DENALI_PHY_605_DATA 0x00000000 >> +#define DENALI_PHY_606_DATA 0x00000000 >> +#define DENALI_PHY_607_DATA 0x00000000 >> +#define DENALI_PHY_608_DATA 0x00000000 >> +#define DENALI_PHY_609_DATA 0x00000000 >> +#define DENALI_PHY_610_DATA 0x00000000 >> +#define DENALI_PHY_611_DATA 0x00000000 >> +#define DENALI_PHY_612_DATA 0x00000000 >> +#define DENALI_PHY_613_DATA 0x00000000 >> +#define DENALI_PHY_614_DATA 0x00000000 >> +#define DENALI_PHY_615_DATA 0x00000000 >> +#define DENALI_PHY_616_DATA 0x00000000 >> +#define DENALI_PHY_617_DATA 0x00000000 >> +#define DENALI_PHY_618_DATA 0x00000000 >> +#define DENALI_PHY_619_DATA 0x00000000 >> +#define DENALI_PHY_620_DATA 0x00000000 >> +#define DENALI_PHY_621_DATA 0x00000000 >> +#define DENALI_PHY_622_DATA 0x00000000 >> +#define DENALI_PHY_623_DATA 0x00000000 >> +#define DENALI_PHY_624_DATA 0x00000000 >> +#define DENALI_PHY_625_DATA 0x00000000 >> +#define DENALI_PHY_626_DATA 0x00000000 >> +#define DENALI_PHY_627_DATA 0x00000000 >> +#define DENALI_PHY_628_DATA 0x00000000 >> +#define DENALI_PHY_629_DATA 0x00000000 >> +#define DENALI_PHY_630_DATA 0x00000000 >> +#define DENALI_PHY_631_DATA 0x00000000 >> +#define DENALI_PHY_632_DATA 0x00000000 >> +#define DENALI_PHY_633_DATA 0x00000000 >> +#define DENALI_PHY_634_DATA 0x00000000 >> +#define DENALI_PHY_635_DATA 0x00000000 >> +#define DENALI_PHY_636_DATA 0x00000000 >> +#define DENALI_PHY_637_DATA 0x00000000 >> +#define DENALI_PHY_638_DATA 0x00000000 >> +#define DENALI_PHY_639_DATA 0x00000000 >> +#define DENALI_PHY_640_DATA 0x35174620 >> +#define DENALI_PHY_641_DATA 0x0004c008 >> +#define DENALI_PHY_642_DATA 0x000000da >> +#define DENALI_PHY_643_DATA 0x00000000 >> +#define DENALI_PHY_644_DATA 0x00000000 >> +#define DENALI_PHY_645_DATA 0x00010000 >> +#define DENALI_PHY_646_DATA 0x01DDDD90 >> +#define DENALI_PHY_647_DATA 0x01DDDD90 >> +#define DENALI_PHY_648_DATA 0x01030000 >> +#define DENALI_PHY_649_DATA 0x01000000 >> +#define DENALI_PHY_650_DATA 0x00c00000 >> +#define DENALI_PHY_651_DATA 0x00000007 >> +#define DENALI_PHY_652_DATA 0x00000000 >> +#define DENALI_PHY_653_DATA 0x00000000 >> +#define DENALI_PHY_654_DATA 0x04000408 >> +#define DENALI_PHY_655_DATA 0x00000408 >> +#define DENALI_PHY_656_DATA 0x00e4e400 >> +#define DENALI_PHY_657_DATA 0x00000000 >> +#define DENALI_PHY_658_DATA 0x00000000 >> +#define DENALI_PHY_659_DATA 0x00000000 >> +#define DENALI_PHY_660_DATA 0x00000000 >> +#define DENALI_PHY_661_DATA 0x00000000 >> +#define DENALI_PHY_662_DATA 0x00000000 >> +#define DENALI_PHY_663_DATA 0x00000000 >> +#define DENALI_PHY_664_DATA 0x00000000 >> +#define DENALI_PHY_665_DATA 0x00000000 >> +#define DENALI_PHY_666_DATA 0x00000000 >> +#define DENALI_PHY_667_DATA 0x00000000 >> +#define DENALI_PHY_668_DATA 0x00000000 >> +#define DENALI_PHY_669_DATA 0x00000000 >> +#define DENALI_PHY_670_DATA 0x00000000 >> +#define DENALI_PHY_671_DATA 0x00000000 >> +#define DENALI_PHY_672_DATA 0x00000000 >> +#define DENALI_PHY_673_DATA 0x00200000 >> +#define DENALI_PHY_674_DATA 0x00000000 >> +#define DENALI_PHY_675_DATA 0x00000000 >> +#define DENALI_PHY_676_DATA 0x00000000 >> +#define DENALI_PHY_677_DATA 0x00000000 >> +#define DENALI_PHY_678_DATA 0x00000000 >> +#define DENALI_PHY_679_DATA 0x00000000 >> +#define DENALI_PHY_680_DATA 0x02800280 >> +#define DENALI_PHY_681_DATA 0x02800280 >> +#define DENALI_PHY_682_DATA 0x02800280 >> +#define DENALI_PHY_683_DATA 0x02800280 >> +#define DENALI_PHY_684_DATA 0x00000280 >> +#define DENALI_PHY_685_DATA 0x00000000 >> +#define DENALI_PHY_686_DATA 0x00000000 >> +#define DENALI_PHY_687_DATA 0x00000000 >> +#define DENALI_PHY_688_DATA 0x00000000 >> +#define DENALI_PHY_689_DATA 0x00000000 >> +#define DENALI_PHY_690_DATA 0x00800080 >> +#define DENALI_PHY_691_DATA 0x00800080 >> +#define DENALI_PHY_692_DATA 0x00800080 >> +#define DENALI_PHY_693_DATA 0x00800080 >> +#define DENALI_PHY_694_DATA 0x00800080 >> +#define DENALI_PHY_695_DATA 0x00800080 >> +#define DENALI_PHY_696_DATA 0x00800080 >> +#define DENALI_PHY_697_DATA 0x00800080 >> +#define DENALI_PHY_698_DATA 0x00800080 >> +#define DENALI_PHY_699_DATA 0x000100da >> +#define DENALI_PHY_700_DATA 0x00000200 >> +#define DENALI_PHY_701_DATA 0x00000000 >> +#define DENALI_PHY_702_DATA 0x00000000 >> +#define DENALI_PHY_703_DATA 0x00000002 >> +#define DENALI_PHY_704_DATA 0x51313152 >> +#define DENALI_PHY_705_DATA 0x80013130 >> +#define DENALI_PHY_706_DATA 0x02000080 >> +#define DENALI_PHY_707_DATA 0x00100001 >> +#define DENALI_PHY_708_DATA 0x0c064208 >> +#define DENALI_PHY_709_DATA 0x000f0c0f >> +#define DENALI_PHY_710_DATA 0x01000140 >> +#define DENALI_PHY_711_DATA 0x0000000c >> +#define DENALI_PHY_712_DATA 0x00000000 >> +#define DENALI_PHY_713_DATA 0x00000000 >> +#define DENALI_PHY_714_DATA 0x00000000 >> +#define DENALI_PHY_715_DATA 0x00000000 >> +#define DENALI_PHY_716_DATA 0x00000000 >> +#define DENALI_PHY_717_DATA 0x00000000 >> +#define DENALI_PHY_718_DATA 0x00000000 >> +#define DENALI_PHY_719_DATA 0x00000000 >> +#define DENALI_PHY_720_DATA 0x00000000 >> +#define DENALI_PHY_721_DATA 0x00000000 >> +#define DENALI_PHY_722_DATA 0x00000000 >> +#define DENALI_PHY_723_DATA 0x00000000 >> +#define DENALI_PHY_724_DATA 0x00000000 >> +#define DENALI_PHY_725_DATA 0x00000000 >> +#define DENALI_PHY_726_DATA 0x00000000 >> +#define DENALI_PHY_727_DATA 0x00000000 >> +#define DENALI_PHY_728_DATA 0x00000000 >> +#define DENALI_PHY_729_DATA 0x00000000 >> +#define DENALI_PHY_730_DATA 0x00000000 >> +#define DENALI_PHY_731_DATA 0x00000000 >> +#define DENALI_PHY_732_DATA 0x00000000 >> +#define DENALI_PHY_733_DATA 0x00000000 >> +#define DENALI_PHY_734_DATA 0x00000000 >> +#define DENALI_PHY_735_DATA 0x00000000 >> +#define DENALI_PHY_736_DATA 0x00000000 >> +#define DENALI_PHY_737_DATA 0x00000000 >> +#define DENALI_PHY_738_DATA 0x00000000 >> +#define DENALI_PHY_739_DATA 0x00000000 >> +#define DENALI_PHY_740_DATA 0x00000000 >> +#define DENALI_PHY_741_DATA 0x00000000 >> +#define DENALI_PHY_742_DATA 0x00000000 >> +#define DENALI_PHY_743_DATA 0x00000000 >> +#define DENALI_PHY_744_DATA 0x00000000 >> +#define DENALI_PHY_745_DATA 0x00000000 >> +#define DENALI_PHY_746_DATA 0x00000000 >> +#define DENALI_PHY_747_DATA 0x00000000 >> +#define DENALI_PHY_748_DATA 0x00000000 >> +#define DENALI_PHY_749_DATA 0x00000000 >> +#define DENALI_PHY_750_DATA 0x00000000 >> +#define DENALI_PHY_751_DATA 0x00000000 >> +#define DENALI_PHY_752_DATA 0x00000000 >> +#define DENALI_PHY_753_DATA 0x00000000 >> +#define DENALI_PHY_754_DATA 0x00000000 >> +#define DENALI_PHY_755_DATA 0x00000000 >> +#define DENALI_PHY_756_DATA 0x00000000 >> +#define DENALI_PHY_757_DATA 0x00000000 >> +#define DENALI_PHY_758_DATA 0x00000000 >> +#define DENALI_PHY_759_DATA 0x00000000 >> +#define DENALI_PHY_760_DATA 0x00000000 >> +#define DENALI_PHY_761_DATA 0x00000000 >> +#define DENALI_PHY_762_DATA 0x00000000 >> +#define DENALI_PHY_763_DATA 0x00000000 >> +#define DENALI_PHY_764_DATA 0x00000000 >> +#define DENALI_PHY_765_DATA 0x00000000 >> +#define DENALI_PHY_766_DATA 0x00000000 >> +#define DENALI_PHY_767_DATA 0x00000000 >> +#define DENALI_PHY_768_DATA 0x15203476 >> +#define DENALI_PHY_769_DATA 0x0004c008 >> +#define DENALI_PHY_770_DATA 0x000000da >> +#define DENALI_PHY_771_DATA 0x00000000 >> +#define DENALI_PHY_772_DATA 0x00000000 >> +#define DENALI_PHY_773_DATA 0x00010000 >> +#define DENALI_PHY_774_DATA 0x01DDDD90 >> +#define DENALI_PHY_775_DATA 0x01DDDD90 >> +#define DENALI_PHY_776_DATA 0x01030000 >> +#define DENALI_PHY_777_DATA 0x01000000 >> +#define DENALI_PHY_778_DATA 0x00c00000 >> +#define DENALI_PHY_779_DATA 0x00000007 >> +#define DENALI_PHY_780_DATA 0x00000000 >> +#define DENALI_PHY_781_DATA 0x00000000 >> +#define DENALI_PHY_782_DATA 0x04000408 >> +#define DENALI_PHY_783_DATA 0x00000408 >> +#define DENALI_PHY_784_DATA 0x00e4e400 >> +#define DENALI_PHY_785_DATA 0x00000000 >> +#define DENALI_PHY_786_DATA 0x00000000 >> +#define DENALI_PHY_787_DATA 0x00000000 >> +#define DENALI_PHY_788_DATA 0x00000000 >> +#define DENALI_PHY_789_DATA 0x00000000 >> +#define DENALI_PHY_790_DATA 0x00000000 >> +#define DENALI_PHY_791_DATA 0x00000000 >> +#define DENALI_PHY_792_DATA 0x00000000 >> +#define DENALI_PHY_793_DATA 0x00000000 >> +#define DENALI_PHY_794_DATA 0x00000000 >> +#define DENALI_PHY_795_DATA 0x00000000 >> +#define DENALI_PHY_796_DATA 0x00000000 >> +#define DENALI_PHY_797_DATA 0x00000000 >> +#define DENALI_PHY_798_DATA 0x00000000 >> +#define DENALI_PHY_799_DATA 0x00000000 >> +#define DENALI_PHY_800_DATA 0x00000000 >> +#define DENALI_PHY_801_DATA 0x00200000 >> +#define DENALI_PHY_802_DATA 0x00000000 >> +#define DENALI_PHY_803_DATA 0x00000000 >> +#define DENALI_PHY_804_DATA 0x00000000 >> +#define DENALI_PHY_805_DATA 0x00000000 >> +#define DENALI_PHY_806_DATA 0x00000000 >> +#define DENALI_PHY_807_DATA 0x00000000 >> +#define DENALI_PHY_808_DATA 0x02800280 >> +#define DENALI_PHY_809_DATA 0x02800280 >> +#define DENALI_PHY_810_DATA 0x02800280 >> +#define DENALI_PHY_811_DATA 0x02800280 >> +#define DENALI_PHY_812_DATA 0x00000280 >> +#define DENALI_PHY_813_DATA 0x00000000 >> +#define DENALI_PHY_814_DATA 0x00000000 >> +#define DENALI_PHY_815_DATA 0x00000000 >> +#define DENALI_PHY_816_DATA 0x00000000 >> +#define DENALI_PHY_817_DATA 0x00000000 >> +#define DENALI_PHY_818_DATA 0x00800080 >> +#define DENALI_PHY_819_DATA 0x00800080 >> +#define DENALI_PHY_820_DATA 0x00800080 >> +#define DENALI_PHY_821_DATA 0x00800080 >> +#define DENALI_PHY_822_DATA 0x00800080 >> +#define DENALI_PHY_823_DATA 0x00800080 >> +#define DENALI_PHY_824_DATA 0x00800080 >> +#define DENALI_PHY_825_DATA 0x00800080 >> +#define DENALI_PHY_826_DATA 0x00800080 >> +#define DENALI_PHY_827_DATA 0x000100da >> +#define DENALI_PHY_828_DATA 0x00000200 >> +#define DENALI_PHY_829_DATA 0x00000000 >> +#define DENALI_PHY_830_DATA 0x00000000 >> +#define DENALI_PHY_831_DATA 0x00000002 >> +#define DENALI_PHY_832_DATA 0x51313152 >> +#define DENALI_PHY_833_DATA 0x80013130 >> +#define DENALI_PHY_834_DATA 0x02000080 >> +#define DENALI_PHY_835_DATA 0x00100001 >> +#define DENALI_PHY_836_DATA 0x0c064208 >> +#define DENALI_PHY_837_DATA 0x000f0c0f >> +#define DENALI_PHY_838_DATA 0x01000140 >> +#define DENALI_PHY_839_DATA 0x0000000c >> +#define DENALI_PHY_840_DATA 0x00000000 >> +#define DENALI_PHY_841_DATA 0x00000000 >> +#define DENALI_PHY_842_DATA 0x00000000 >> +#define DENALI_PHY_843_DATA 0x00000000 >> +#define DENALI_PHY_844_DATA 0x00000000 >> +#define DENALI_PHY_845_DATA 0x00000000 >> +#define DENALI_PHY_846_DATA 0x00000000 >> +#define DENALI_PHY_847_DATA 0x00000000 >> +#define DENALI_PHY_848_DATA 0x00000000 >> +#define DENALI_PHY_849_DATA 0x00000000 >> +#define DENALI_PHY_850_DATA 0x00000000 >> +#define DENALI_PHY_851_DATA 0x00000000 >> +#define DENALI_PHY_852_DATA 0x00000000 >> +#define DENALI_PHY_853_DATA 0x00000000 >> +#define DENALI_PHY_854_DATA 0x00000000 >> +#define DENALI_PHY_855_DATA 0x00000000 >> +#define DENALI_PHY_856_DATA 0x00000000 >> +#define DENALI_PHY_857_DATA 0x00000000 >> +#define DENALI_PHY_858_DATA 0x00000000 >> +#define DENALI_PHY_859_DATA 0x00000000 >> +#define DENALI_PHY_860_DATA 0x00000000 >> +#define DENALI_PHY_861_DATA 0x00000000 >> +#define DENALI_PHY_862_DATA 0x00000000 >> +#define DENALI_PHY_863_DATA 0x00000000 >> +#define DENALI_PHY_864_DATA 0x00000000 >> +#define DENALI_PHY_865_DATA 0x00000000 >> +#define DENALI_PHY_866_DATA 0x00000000 >> +#define DENALI_PHY_867_DATA 0x00000000 >> +#define DENALI_PHY_868_DATA 0x00000000 >> +#define DENALI_PHY_869_DATA 0x00000000 >> +#define DENALI_PHY_870_DATA 0x00000000 >> +#define DENALI_PHY_871_DATA 0x00000000 >> +#define DENALI_PHY_872_DATA 0x00000000 >> +#define DENALI_PHY_873_DATA 0x00000000 >> +#define DENALI_PHY_874_DATA 0x00000000 >> +#define DENALI_PHY_875_DATA 0x00000000 >> +#define DENALI_PHY_876_DATA 0x00000000 >> +#define DENALI_PHY_877_DATA 0x00000000 >> +#define DENALI_PHY_878_DATA 0x00000000 >> +#define DENALI_PHY_879_DATA 0x00000000 >> +#define DENALI_PHY_880_DATA 0x00000000 >> +#define DENALI_PHY_881_DATA 0x00000000 >> +#define DENALI_PHY_882_DATA 0x00000000 >> +#define DENALI_PHY_883_DATA 0x00000000 >> +#define DENALI_PHY_884_DATA 0x00000000 >> +#define DENALI_PHY_885_DATA 0x00000000 >> +#define DENALI_PHY_886_DATA 0x00000000 >> +#define DENALI_PHY_887_DATA 0x00000000 >> +#define DENALI_PHY_888_DATA 0x00000000 >> +#define DENALI_PHY_889_DATA 0x00000000 >> +#define DENALI_PHY_890_DATA 0x00000000 >> +#define DENALI_PHY_891_DATA 0x00000000 >> +#define DENALI_PHY_892_DATA 0x00000000 >> +#define DENALI_PHY_893_DATA 0x00000000 >> +#define DENALI_PHY_894_DATA 0x00000000 >> +#define DENALI_PHY_895_DATA 0x00000000 >> +#define DENALI_PHY_896_DATA 0x41753206 >> +#define DENALI_PHY_897_DATA 0x0004c008 >> +#define DENALI_PHY_898_DATA 0x000000da >> +#define DENALI_PHY_899_DATA 0x00000000 >> +#define DENALI_PHY_900_DATA 0x00000000 >> +#define DENALI_PHY_901_DATA 0x00010000 >> +#define DENALI_PHY_902_DATA 0x01DDDD90 >> +#define DENALI_PHY_903_DATA 0x01DDDD90 >> +#define DENALI_PHY_904_DATA 0x01030000 >> +#define DENALI_PHY_905_DATA 0x01000000 >> +#define DENALI_PHY_906_DATA 0x00c00000 >> +#define DENALI_PHY_907_DATA 0x00000007 >> +#define DENALI_PHY_908_DATA 0x00000000 >> +#define DENALI_PHY_909_DATA 0x00000000 >> +#define DENALI_PHY_910_DATA 0x04000408 >> +#define DENALI_PHY_911_DATA 0x00000408 >> +#define DENALI_PHY_912_DATA 0x00e4e400 >> +#define DENALI_PHY_913_DATA 0x00000000 >> +#define DENALI_PHY_914_DATA 0x00000000 >> +#define DENALI_PHY_915_DATA 0x00000000 >> +#define DENALI_PHY_916_DATA 0x00000000 >> +#define DENALI_PHY_917_DATA 0x00000000 >> +#define DENALI_PHY_918_DATA 0x00000000 >> +#define DENALI_PHY_919_DATA 0x00000000 >> +#define DENALI_PHY_920_DATA 0x00000000 >> +#define DENALI_PHY_921_DATA 0x00000000 >> +#define DENALI_PHY_922_DATA 0x00000000 >> +#define DENALI_PHY_923_DATA 0x00000000 >> +#define DENALI_PHY_924_DATA 0x00000000 >> +#define DENALI_PHY_925_DATA 0x00000000 >> +#define DENALI_PHY_926_DATA 0x00000000 >> +#define DENALI_PHY_927_DATA 0x00000000 >> +#define DENALI_PHY_928_DATA 0x00000000 >> +#define DENALI_PHY_929_DATA 0x00200000 >> +#define DENALI_PHY_930_DATA 0x00000000 >> +#define DENALI_PHY_931_DATA 0x00000000 >> +#define DENALI_PHY_932_DATA 0x00000000 >> +#define DENALI_PHY_933_DATA 0x00000000 >> +#define DENALI_PHY_934_DATA 0x00000000 >> +#define DENALI_PHY_935_DATA 0x00000000 >> +#define DENALI_PHY_936_DATA 0x02800280 >> +#define DENALI_PHY_937_DATA 0x02800280 >> +#define DENALI_PHY_938_DATA 0x02800280 >> +#define DENALI_PHY_939_DATA 0x02800280 >> +#define DENALI_PHY_940_DATA 0x00000280 >> +#define DENALI_PHY_941_DATA 0x00000000 >> +#define DENALI_PHY_942_DATA 0x00000000 >> +#define DENALI_PHY_943_DATA 0x00000000 >> +#define DENALI_PHY_944_DATA 0x00000000 >> +#define DENALI_PHY_945_DATA 0x00000000 >> +#define DENALI_PHY_946_DATA 0x00800080 >> +#define DENALI_PHY_947_DATA 0x00800080 >> +#define DENALI_PHY_948_DATA 0x00800080 >> +#define DENALI_PHY_949_DATA 0x00800080 >> +#define DENALI_PHY_950_DATA 0x00800080 >> +#define DENALI_PHY_951_DATA 0x00800080 >> +#define DENALI_PHY_952_DATA 0x00800080 >> +#define DENALI_PHY_953_DATA 0x00800080 >> +#define DENALI_PHY_954_DATA 0x00800080 >> +#define DENALI_PHY_955_DATA 0x000100da >> +#define DENALI_PHY_956_DATA 0x00000200 >> +#define DENALI_PHY_957_DATA 0x00000000 >> +#define DENALI_PHY_958_DATA 0x00000000 >> +#define DENALI_PHY_959_DATA 0x00000002 >> +#define DENALI_PHY_960_DATA 0x51313152 >> +#define DENALI_PHY_961_DATA 0x80013130 >> +#define DENALI_PHY_962_DATA 0x02000080 >> +#define DENALI_PHY_963_DATA 0x00100001 >> +#define DENALI_PHY_964_DATA 0x0c064208 >> +#define DENALI_PHY_965_DATA 0x000f0c0f >> +#define DENALI_PHY_966_DATA 0x01000140 >> +#define DENALI_PHY_967_DATA 0x0000000c >> +#define DENALI_PHY_968_DATA 0x00000000 >> +#define DENALI_PHY_969_DATA 0x00000000 >> +#define DENALI_PHY_970_DATA 0x00000000 >> +#define DENALI_PHY_971_DATA 0x00000000 >> +#define DENALI_PHY_972_DATA 0x00000000 >> +#define DENALI_PHY_973_DATA 0x00000000 >> +#define DENALI_PHY_974_DATA 0x00000000 >> +#define DENALI_PHY_975_DATA 0x00000000 >> +#define DENALI_PHY_976_DATA 0x00000000 >> +#define DENALI_PHY_977_DATA 0x00000000 >> +#define DENALI_PHY_978_DATA 0x00000000 >> +#define DENALI_PHY_979_DATA 0x00000000 >> +#define DENALI_PHY_980_DATA 0x00000000 >> +#define DENALI_PHY_981_DATA 0x00000000 >> +#define DENALI_PHY_982_DATA 0x00000000 >> +#define DENALI_PHY_983_DATA 0x00000000 >> +#define DENALI_PHY_984_DATA 0x00000000 >> +#define DENALI_PHY_985_DATA 0x00000000 >> +#define DENALI_PHY_986_DATA 0x00000000 >> +#define DENALI_PHY_987_DATA 0x00000000 >> +#define DENALI_PHY_988_DATA 0x00000000 >> +#define DENALI_PHY_989_DATA 0x00000000 >> +#define DENALI_PHY_990_DATA 0x00000000 >> +#define DENALI_PHY_991_DATA 0x00000000 >> +#define DENALI_PHY_992_DATA 0x00000000 >> +#define DENALI_PHY_993_DATA 0x00000000 >> +#define DENALI_PHY_994_DATA 0x00000000 >> +#define DENALI_PHY_995_DATA 0x00000000 >> +#define DENALI_PHY_996_DATA 0x00000000 >> +#define DENALI_PHY_997_DATA 0x00000000 >> +#define DENALI_PHY_998_DATA 0x00000000 >> +#define DENALI_PHY_999_DATA 0x00000000 >> +#define DENALI_PHY_1000_DATA 0x00000000 >> +#define DENALI_PHY_1001_DATA 0x00000000 >> +#define DENALI_PHY_1002_DATA 0x00000000 >> +#define DENALI_PHY_1003_DATA 0x00000000 >> +#define DENALI_PHY_1004_DATA 0x00000000 >> +#define DENALI_PHY_1005_DATA 0x00000000 >> +#define DENALI_PHY_1006_DATA 0x00000000 >> +#define DENALI_PHY_1007_DATA 0x00000000 >> +#define DENALI_PHY_1008_DATA 0x00000000 >> +#define DENALI_PHY_1009_DATA 0x00000000 >> +#define DENALI_PHY_1010_DATA 0x00000000 >> +#define DENALI_PHY_1011_DATA 0x00000000 >> +#define DENALI_PHY_1012_DATA 0x00000000 >> +#define DENALI_PHY_1013_DATA 0x00000000 >> +#define DENALI_PHY_1014_DATA 0x00000000 >> +#define DENALI_PHY_1015_DATA 0x00000000 >> +#define DENALI_PHY_1016_DATA 0x00000000 >> +#define DENALI_PHY_1017_DATA 0x00000000 >> +#define DENALI_PHY_1018_DATA 0x00000000 >> +#define DENALI_PHY_1019_DATA 0x00000000 >> +#define DENALI_PHY_1020_DATA 0x00000000 >> +#define DENALI_PHY_1021_DATA 0x00000000 >> +#define DENALI_PHY_1022_DATA 0x00000000 >> +#define DENALI_PHY_1023_DATA 0x00000000 >> +#define DENALI_PHY_1024_DATA 0x36025174 >> +#define DENALI_PHY_1025_DATA 0x0004c008 >> +#define DENALI_PHY_1026_DATA 0x000000da >> +#define DENALI_PHY_1027_DATA 0x00000000 >> +#define DENALI_PHY_1028_DATA 0x00000000 >> +#define DENALI_PHY_1029_DATA 0x00010000 >> +#define DENALI_PHY_1030_DATA 0x01DDDD90 >> +#define DENALI_PHY_1031_DATA 0x01DDDD90 >> +#define DENALI_PHY_1032_DATA 0x01030000 >> +#define DENALI_PHY_1033_DATA 0x01000000 >> +#define DENALI_PHY_1034_DATA 0x00c00000 >> +#define DENALI_PHY_1035_DATA 0x00000007 >> +#define DENALI_PHY_1036_DATA 0x00000000 >> +#define DENALI_PHY_1037_DATA 0x00000000 >> +#define DENALI_PHY_1038_DATA 0x04000408 >> +#define DENALI_PHY_1039_DATA 0x00000408 >> +#define DENALI_PHY_1040_DATA 0x00e4e400 >> +#define DENALI_PHY_1041_DATA 0x00000000 >> +#define DENALI_PHY_1042_DATA 0x00000000 >> +#define DENALI_PHY_1043_DATA 0x00000000 >> +#define DENALI_PHY_1044_DATA 0x00000000 >> +#define DENALI_PHY_1045_DATA 0x00000000 >> +#define DENALI_PHY_1046_DATA 0x00000000 >> +#define DENALI_PHY_1047_DATA 0x00000000 >> +#define DENALI_PHY_1048_DATA 0x00000000 >> +#define DENALI_PHY_1049_DATA 0x00000000 >> +#define DENALI_PHY_1050_DATA 0x00000000 >> +#define DENALI_PHY_1051_DATA 0x00000000 >> +#define DENALI_PHY_1052_DATA 0x00000000 >> +#define DENALI_PHY_1053_DATA 0x00000000 >> +#define DENALI_PHY_1054_DATA 0x00000000 >> +#define DENALI_PHY_1055_DATA 0x00000000 >> +#define DENALI_PHY_1056_DATA 0x00000000 >> +#define DENALI_PHY_1057_DATA 0x00200000 >> +#define DENALI_PHY_1058_DATA 0x00000000 >> +#define DENALI_PHY_1059_DATA 0x00000000 >> +#define DENALI_PHY_1060_DATA 0x00000000 >> +#define DENALI_PHY_1061_DATA 0x00000000 >> +#define DENALI_PHY_1062_DATA 0x00000000 >> +#define DENALI_PHY_1063_DATA 0x00000000 >> +#define DENALI_PHY_1064_DATA 0x02800280 >> +#define DENALI_PHY_1065_DATA 0x02800280 >> +#define DENALI_PHY_1066_DATA 0x02800280 >> +#define DENALI_PHY_1067_DATA 0x02800280 >> +#define DENALI_PHY_1068_DATA 0x00000280 >> +#define DENALI_PHY_1069_DATA 0x00000000 >> +#define DENALI_PHY_1070_DATA 0x00000000 >> +#define DENALI_PHY_1071_DATA 0x00000000 >> +#define DENALI_PHY_1072_DATA 0x00000000 >> +#define DENALI_PHY_1073_DATA 0x00000000 >> +#define DENALI_PHY_1074_DATA 0x00800080 >> +#define DENALI_PHY_1075_DATA 0x00800080 >> +#define DENALI_PHY_1076_DATA 0x00800080 >> +#define DENALI_PHY_1077_DATA 0x00800080 >> +#define DENALI_PHY_1078_DATA 0x00800080 >> +#define DENALI_PHY_1079_DATA 0x00800080 >> +#define DENALI_PHY_1080_DATA 0x00800080 >> +#define DENALI_PHY_1081_DATA 0x00800080 >> +#define DENALI_PHY_1082_DATA 0x00800080 >> +#define DENALI_PHY_1083_DATA 0x000100da >> +#define DENALI_PHY_1084_DATA 0x00000200 >> +#define DENALI_PHY_1085_DATA 0x00000000 >> +#define DENALI_PHY_1086_DATA 0x00000000 >> +#define DENALI_PHY_1087_DATA 0x00000002 >> +#define DENALI_PHY_1088_DATA 0x51313152 >> +#define DENALI_PHY_1089_DATA 0x80013130 >> +#define DENALI_PHY_1090_DATA 0x02000080 >> +#define DENALI_PHY_1091_DATA 0x00100001 >> +#define DENALI_PHY_1092_DATA 0x0c064208 >> +#define DENALI_PHY_1093_DATA 0x000f0c0f >> +#define DENALI_PHY_1094_DATA 0x01000140 >> +#define DENALI_PHY_1095_DATA 0x0000000c >> +#define DENALI_PHY_1096_DATA 0x00000000 >> +#define DENALI_PHY_1097_DATA 0x00000000 >> +#define DENALI_PHY_1098_DATA 0x00000000 >> +#define DENALI_PHY_1099_DATA 0x00000000 >> +#define DENALI_PHY_1100_DATA 0x00000000 >> +#define DENALI_PHY_1101_DATA 0x00000000 >> +#define DENALI_PHY_1102_DATA 0x00000000 >> +#define DENALI_PHY_1103_DATA 0x00000000 >> +#define DENALI_PHY_1104_DATA 0x00000000 >> +#define DENALI_PHY_1105_DATA 0x00000000 >> +#define DENALI_PHY_1106_DATA 0x00000000 >> +#define DENALI_PHY_1107_DATA 0x00000000 >> +#define DENALI_PHY_1108_DATA 0x00000000 >> +#define DENALI_PHY_1109_DATA 0x00000000 >> +#define DENALI_PHY_1110_DATA 0x00000000 >> +#define DENALI_PHY_1111_DATA 0x00000000 >> +#define DENALI_PHY_1112_DATA 0x00000000 >> +#define DENALI_PHY_1113_DATA 0x00000000 >> +#define DENALI_PHY_1114_DATA 0x00000000 >> +#define DENALI_PHY_1115_DATA 0x00000000 >> +#define DENALI_PHY_1116_DATA 0x00000000 >> +#define DENALI_PHY_1117_DATA 0x00000000 >> +#define DENALI_PHY_1118_DATA 0x00000000 >> +#define DENALI_PHY_1119_DATA 0x00000000 >> +#define DENALI_PHY_1120_DATA 0x00000000 >> +#define DENALI_PHY_1121_DATA 0x00000000 >> +#define DENALI_PHY_1122_DATA 0x00000000 >> +#define DENALI_PHY_1123_DATA 0x00000000 >> +#define DENALI_PHY_1124_DATA 0x00000000 >> +#define DENALI_PHY_1125_DATA 0x00000000 >> +#define DENALI_PHY_1126_DATA 0x00000000 >> +#define DENALI_PHY_1127_DATA 0x00000000 >> +#define DENALI_PHY_1128_DATA 0x00000000 >> +#define DENALI_PHY_1129_DATA 0x00000000 >> +#define DENALI_PHY_1130_DATA 0x00000000 >> +#define DENALI_PHY_1131_DATA 0x00000000 >> +#define DENALI_PHY_1132_DATA 0x00000000 >> +#define DENALI_PHY_1133_DATA 0x00000000 >> +#define DENALI_PHY_1134_DATA 0x00000000 >> +#define DENALI_PHY_1135_DATA 0x00000000 >> +#define DENALI_PHY_1136_DATA 0x00000000 >> +#define DENALI_PHY_1137_DATA 0x00000000 >> +#define DENALI_PHY_1138_DATA 0x00000000 >> +#define DENALI_PHY_1139_DATA 0x00000000 >> +#define DENALI_PHY_1140_DATA 0x00000000 >> +#define DENALI_PHY_1141_DATA 0x00000000 >> +#define DENALI_PHY_1142_DATA 0x00000000 >> +#define DENALI_PHY_1143_DATA 0x00000000 >> +#define DENALI_PHY_1144_DATA 0x00000000 >> +#define DENALI_PHY_1145_DATA 0x00000000 >> +#define DENALI_PHY_1146_DATA 0x00000000 >> +#define DENALI_PHY_1147_DATA 0x00000000 >> +#define DENALI_PHY_1148_DATA 0x00000000 >> +#define DENALI_PHY_1149_DATA 0x00000000 >> +#define DENALI_PHY_1150_DATA 0x00000000 >> +#define DENALI_PHY_1151_DATA 0x00000000 >> +#define DENALI_PHY_1152_DATA 0x00000000 >> +#define DENALI_PHY_1153_DATA 0x00000000 >> +#define DENALI_PHY_1154_DATA 0x00050000 >> +#define DENALI_PHY_1155_DATA 0x00000000 >> +#define DENALI_PHY_1156_DATA 0x00000000 >> +#define DENALI_PHY_1157_DATA 0x00000000 >> +#define DENALI_PHY_1158_DATA 0x00000100 >> +#define DENALI_PHY_1159_DATA 0x00000000 >> +#define DENALI_PHY_1160_DATA 0x00000000 >> +#define DENALI_PHY_1161_DATA 0x00506401 >> +#define DENALI_PHY_1162_DATA 0x01221102 >> +#define DENALI_PHY_1163_DATA 0x00000122 >> +#define DENALI_PHY_1164_DATA 0x00000000 >> +#define DENALI_PHY_1165_DATA 0x000B1F00 >> +#define DENALI_PHY_1166_DATA 0x0B1F0B1F >> +#define DENALI_PHY_1167_DATA 0x0B1F0B1B >> +#define DENALI_PHY_1168_DATA 0x0B1F0B1F >> +#define DENALI_PHY_1169_DATA 0x0B1F0B1F >> +#define DENALI_PHY_1170_DATA 0x00000B00 >> +#define DENALI_PHY_1171_DATA 0x42080010 >> +#define DENALI_PHY_1172_DATA 0x01000100 >> +#define DENALI_PHY_1173_DATA 0x01000100 >> +#define DENALI_PHY_1174_DATA 0x01000100 >> +#define DENALI_PHY_1175_DATA 0x01000100 >> +#define DENALI_PHY_1176_DATA 0x00000000 >> +#define DENALI_PHY_1177_DATA 0x00000000 >> +#define DENALI_PHY_1178_DATA 0x00000000 >> +#define DENALI_PHY_1179_DATA 0x00000000 >> +#define DENALI_PHY_1180_DATA 0x00000000 >> +#define DENALI_PHY_1181_DATA 0x00000803 >> +#define DENALI_PHY_1182_DATA 0x223FFF00 >> +#define DENALI_PHY_1183_DATA 0x000008FF >> +#define DENALI_PHY_1184_DATA 0x0000057F >> +#define DENALI_PHY_1185_DATA 0x0000057F >> +#define DENALI_PHY_1186_DATA 0x00037FFF >> +#define DENALI_PHY_1187_DATA 0x00037FFF >> +#define DENALI_PHY_1188_DATA 0x00004410 >> +#define DENALI_PHY_1189_DATA 0x00004410 >> +#define DENALI_PHY_1190_DATA 0x00004410 >> +#define DENALI_PHY_1191_DATA 0x00004410 >> +#define DENALI_PHY_1192_DATA 0x00004410 >> +#define DENALI_PHY_1193_DATA 0x00037FFF >> +#define DENALI_PHY_1194_DATA 0x00037FFF >> +#define DENALI_PHY_1195_DATA 0x00000000 >> +#define DENALI_PHY_1196_DATA 0x00000000 >> +#define DENALI_PHY_1197_DATA 0x00000000 >> +#define DENALI_PHY_1198_DATA 0x04000000 >> +#define DENALI_PHY_1199_DATA 0x00000000 >> +#define DENALI_PHY_1200_DATA 0x00000000 >> +#define DENALI_PHY_1201_DATA 0x00000108 >> +#define DENALI_PHY_1202_DATA 0x00000000 >> +#define DENALI_PHY_1203_DATA 0x00000000 >> +#define DENALI_PHY_1204_DATA 0x00000000 >> +#define DENALI_PHY_1205_DATA 0x00000001 >> +#define DENALI_PHY_1206_DATA 0x00000000 >> +#define DENALI_PHY_1207_DATA 0x00000000 >> +#define DENALI_PHY_1208_DATA 0x00000000 >> +#define DENALI_PHY_1209_DATA 0x00000000 >> +#define DENALI_PHY_1210_DATA 0x00000000 >> +#define DENALI_PHY_1211_DATA 0x00000000 >> +#define DENALI_PHY_1212_DATA 0x00020100 >> +#define DENALI_PHY_1213_DATA 0x00000000 >> +#define DENALI_PHY_1214_DATA 0x00000000 >> diff --git a/board/sifive/fu540/ux00ddr.h b/board/sifive/fu540/ux00ddr.h >> new file mode 100644 >> index 0000000000..2b96397852 >> --- /dev/null >> +++ b/board/sifive/fu540/ux00ddr.h >> @@ -0,0 +1,276 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (c) 2019 SiFive, Inc >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> >> + */ >> + >> +#ifndef FU540_UX00DDR_H >> +#define FU540_UX00DDR_H >> + >> +#ifndef __ASSEMBLER__ >> + >> +#include <stdint.h> >> +#include <stddef.h> >> +#include <stdbool.h> >> + >> +extern u32 ddr_phy_settings[1215]; >> +extern u32 ddr_ctl_settings[265]; >> + >> +#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i))) >> + >> +#define DRAM_CLASS_OFFSET 8 >> +#define DRAM_CLASS_DDR4 0xA >> +#define OPTIMAL_RMODW_EN_OFFSET 0 >> +#define DISABLE_RD_INTERLEAVE_OFFSET 16 >> +#define OUT_OF_RANGE_OFFSET 1 >> +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 >> +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 >> +#define MC_INIT_COMPLETE_OFFSET 8 >> +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 >> +#define DFI_PHY_WRLELV_MODE_OFFSET 24 >> +#define DFI_PHY_RDLVL_MODE_OFFSET 24 >> +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 >> +#define VREF_EN_OFFSET 24 >> +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 >> +#define AXI0_ADDRESS_RANGE_ENABLE 8 >> +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 >> +#define RDLVL_EN_OFFSET 16 >> +#define RDLVL_GATE_EN_OFFSET 24 >> +#define WRLVL_EN_OFFSET 0 >> + >> +#define PHY_RX_CAL_DQ0_0_OFFSET 0 >> +#define PHY_RX_CAL_DQ1_0_OFFSET 16 >> + >> +static inline void phy_reset(volatile u32 *ddrphyreg, const >> + u32 *physettings) >> +{ >> + unsigned int i; >> + >> + for (i = 1152; i <= 1214; i++) { >> + u32 physet = physettings[i]; >> + /*if (physet!=0)*/ ddrphyreg[i] = physet; >> + } >> + >> + for (i = 0; i <= 1151; i++) { >> + u32 physet = physettings[i]; >> + /*if (physet!=0)*/ ddrphyreg[i] = physet; >> + } >> +} >> + >> +static inline void ux00ddr_writeregmap(size_t ahbregaddr, const >> + u32 *ctlsettings, const u32 *physettings) >> +{ >> + volatile u32 *ddrctlreg = (volatile u32 *)ahbregaddr; >> + volatile u32 *ddrphyreg = ((volatile u32 *)ahbregaddr) + >> + (0x2000 / sizeof(u32)); >> + >> + unsigned int i; >> + >> + for (i = 0; i <= 264; i++) { >> + u32 ctlset = ctlsettings[i]; >> + /*if (ctlset!=0)*/ ddrctlreg[i] = ctlset; >> + } >> + >> + phy_reset(ddrphyreg, physettings); >> +} >> + >> +static inline void ux00ddr_start(size_t ahbregaddr, size_t filteraddr, >> + size_t ddrend) >> +{ >> + // START register at ddrctl register base offset 0 >> + u32 regdata = _REG32(0 << 2, ahbregaddr); >> + >> + regdata |= 0x1; >> + _REG32(0 << 2, ahbregaddr) = regdata; >> + >> + /* >> + * WAIT for initialization complete : bit 8 of INT_STATUS >> + * (DENALI_CTL_132) 0x210 >> + */ >> + while ((_REG32(132 << 2, ahbregaddr) & (1 << >> + MC_INIT_COMPLETE_OFFSET)) == 0) { >> + } >> + >> + // Disable the BusBlocker in front of the controller AXI slave ports >> + volatile u64 *filterreg = (volatile u64 *)filteraddr; >> + >> + filterreg[0] = 0x0f00000000000000UL | (ddrend >> 2); >> +} >> + >> +static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t >> + ahbregaddr) >> +{ >> + /* >> + * Mask off Bit 8 of Interrupt Status >> + * Bit [8] The MC initialization has been completed >> + */ >> + >> + _REG32(136 << 2, ahbregaddr) |= (1 << MC_INIT_COMPLETE_OFFSET); >> +} >> + >> +static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) >> +{ >> + /* >> + * Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status >> + * Bit [2] Multiple accesses outside the defined PHYSICAL memory >> + * space have occurred >> + * Bit [1] A memory access outside the defined PHYSICAL memory >> + * space has occurred >> + */ >> + >> + _REG32(136 << 2, ahbregaddr) |= ((1 << OUT_OF_RANGE_OFFSET) | (1 ><< >> + MULTIPLE_OUT_OF_RANGE_OFFSET)); >> +} >> + >> +static inline void ux00ddr_mask_port_command_error_interrupt(size_t >> + ahbregaddr) >> +{ >> + /* >> + * Mask off Bit 7 of Interrupt Status >> + * Bit [7] An error occurred on the port command channel >> + */ >> + >> + _REG32(136 << 2, ahbregaddr) |= (1 << >> + PORT_COMMAND_CHANNEL_ERROR_OFFSET); >> +} >> + >> +static inline void ux00ddr_mask_leveling_completed_interrupt(size_t >> + ahbregaddr) >> +{ >> + /* >> + * Mask off Bit 22 of Interrupt Status >> + * Bit [22] The leveling operation has completed >> + */ >> + >> + _REG32(136 << 2, ahbregaddr) |= (1 << >> + LEVELING_OPERATION_COMPLETED_OFFSET); >> +} >> + >> +static inline void ux00ddr_setuprangeprotection(size_t ahbregaddr, size_t >> + end_addr) >> +{ >> + _REG32(209 << 2, ahbregaddr) = 0x0; >> + size_t end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; >> + >> + _REG32(210 << 2, ahbregaddr) = ((u32)end_addr_16kblocks); >> + _REG32(212 << 2, ahbregaddr) = 0x0; >> + _REG32(214 << 2, ahbregaddr) = 0x0; >> + _REG32(216 << 2, ahbregaddr) = 0x0; >> + _REG32(224 << 2, ahbregaddr) |= (0x3 << >AXI0_RANGE_PROT_BITS_0_OFFSET); >> + _REG32(225 << 2, ahbregaddr) = 0xFFFFFFFF; >> + _REG32(208 << 2, ahbregaddr) |= (1 << >AXI0_ADDRESS_RANGE_ENABLE); >> + _REG32(208 << 2, ahbregaddr) |= (1 << >PORT_ADDR_PROTECTION_EN_OFFSET); >> +} >> + >> +static inline void ux00ddr_disableaxireadinterleave(size_t ahbregaddr) >> +{ >> + _REG32(120 << 2, ahbregaddr) |= (1 << >DISABLE_RD_INTERLEAVE_OFFSET); >> +} >> + >> +static inline void ux00ddr_disableoptimalrmodw(size_t ahbregaddr) >> +{ >> + _REG32(21 << 2, ahbregaddr) &= (~(1 << >OPTIMAL_RMODW_EN_OFFSET)); >> +} >> + >> +static inline void ux00ddr_enablewriteleveling(size_t ahbregaddr) >> +{ >> + _REG32(170 << 2, ahbregaddr) |= ((1 << WRLVL_EN_OFFSET) | (1 << >> + DFI_PHY_WRLELV_MODE_OFFSET)); >> +} >> + >> +static inline void ux00ddr_enablereadleveling(size_t ahbregaddr) >> +{ >> + _REG32(181 << 2, ahbregaddr) |= (1 << >DFI_PHY_RDLVL_MODE_OFFSET); >> + _REG32(260 << 2, ahbregaddr) |= (1 << RDLVL_EN_OFFSET); >> +} >> + >> +static inline void ux00ddr_enablereadlevelinggate(size_t ahbregaddr) >> +{ >> + _REG32(260 << 2, ahbregaddr) |= (1 << RDLVL_GATE_EN_OFFSET); >> + _REG32(182 << 2, ahbregaddr) |= (1 << >DFI_PHY_RDLVL_GATE_MODE_OFFSET); >> +} >> + >> +static inline void ux00ddr_enablevreftraining(size_t ahbregaddr) >> +{ >> + _REG32(184 << 2, ahbregaddr) |= (1 << VREF_EN_OFFSET); >> +} >> + >> +static inline u32 ux00ddr_getdramclass(size_t ahbregaddr) >> +{ >> + return((_REG32(0, ahbregaddr) >> DRAM_CLASS_OFFSET) & 0xF); >> +} >> + >> +static inline u64 ux00ddr_phy_fixup(size_t ahbregaddr) >> +{ >> + // return bitmask of failed lanes >> + >> + size_t ddrphyreg = ahbregaddr + 0x2000; >> + >> + u64 fails = 0; >> + u32 slicebase = 0; >> + u32 dq = 0; >> + >> + // check errata condition >> + for (u32 slice = 0; slice < 8; slice++) { >> + u32 regbase = slicebase + 34; >> + >> + for (u32 reg = 0; reg < 4; reg++) { >> + u32 updownreg = _REG32((regbase + reg) << 2, >> + ddrphyreg); >> + >> + for (u32 bit = 0; bit < 2; bit++) { >> + u32 phy_rx_cal_dqn_0_offset; >> + >> + if (bit == 0) { >> + phy_rx_cal_dqn_0_offset = >> + PHY_RX_CAL_DQ0_0_OFFSET; >> + } else { >> + phy_rx_cal_dqn_0_offset = >> + PHY_RX_CAL_DQ1_0_OFFSET; >> + } >> + >> + u32 down = (updownreg >> >> + phy_rx_cal_dqn_0_offset) & 0x3F; >> + u32 up = (updownreg >> >> + (phy_rx_cal_dqn_0_offset + 6)) & 0x3F; >> + >> + u8 failc0 = ((down == 0) && (up == 0x3F)); >> + u8 failc1 = ((up == 0) && (down == 0x3F)); >> + >> + // print error message on failure >> + if (failc0 || failc1) { >> + if (fails == 0) >> + printf("DDR error in fixing up\n"); >> + >> + fails |= (1 << dq); >> + >> + char slicelsc = '0'; >> + char slicemsc = '0'; >> + >> + slicelsc += (dq % 10); >> + slicemsc += (dq / 10); >> + printf("S "); >> + printf("%c", slicemsc); >> + printf("%c", slicelsc); >> + >> + if (failc0) >> + printf("U"); >> + else >> + printf("D"); >> + >> + printf("\n"); >> + } >> + dq++; >> + } >> + } >> + slicebase += 128; >> + } >> + return(0); >> +} >> + >> +#endif /* __ASSEMBLER__ */ >> + >> +#endif /* FU540_UX00DDR_H */ >> diff --git a/board/sifive/fu540/ux00prci.h b/board/sifive/fu540/ux00prci.h >> new file mode 100644 >> index 0000000000..0393fc2804 >> --- /dev/null >> +++ b/board/sifive/fu540/ux00prci.h >> @@ -0,0 +1,69 @@ >> +/* SPDX-License-Identifier: GPL-2.0+ */ >> +/* >> + * Copyright (c) 2019 SiFive, Inc >> + * >> + * Authors: >> + * Pragnesh Patel <pragnesh.patel at sifive.com> >> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> >> + */ >> + >> +#ifndef _SIFIVE_UX00PRCI_H >> +#define _SIFIVE_UX00PRCI_H >> + >> +/* Register offsets */ >> +#define UX00PRCI_HFROSCCFG (0x0000) >> +#define UX00PRCI_COREPLLCFG (0x0004) >> +#define UX00PRCI_COREPLLOUT (0x0008) >> +#define UX00PRCI_DDRPLLCFG (0x000C) >> +#define UX00PRCI_DDRPLLOUT (0x0010) >> +#define UX00PRCI_GEMGXLPLLCFG (0x001C) >> +#define UX00PRCI_GEMGXLPLLOUT (0x0020) >> +#define UX00PRCI_CORECLKSELREG (0x0024) >> +#define UX00PRCI_DEVICESRESETREG (0x0028) >> +#define UX00PRCI_CLKMUXSTATUSREG (0x002C) >> +#define UX00PRCI_PROCMONCFG (0x00F0) >> + >> +/* Fields */ >> +#define XOSC_EN(x) (((x) & 0x1) << 30) >> +#define XOSC_RDY(x) (((x) & 0x1) << 31) >> + >> +#define PLL_R(x) (((x) & 0x3F) << 0) >> +#define PLL_F(x) (((x) & 0x1FF) << 6) >> +#define PLL_Q(x) (((x) & 0x7) << 15) >> +#define PLL_RANGE(x) (((x) & 0x7) << 18) >> +#define PLL_BYPASS(x) (((x) & 0x1) << 24) >> +#define PLL_FSE(x) (((x) & 0x1) << 25) >> +#define PLL_LOCK(x) (((x) & 0x1) << 31) >> + >> +#define PLLOUT_DIV(x) (((x) & 0x7F) << 0) >> +#define PLLOUT_DIV_BY_1(x) (((x) & 0x1) << 8) >> +#define PLLOUT_CLK_EN(x) (((x) & 0x1) << 31) >> + >> +#define PLL_R_default 0x1 >> +#define PLL_F_default 0x1F >> +#define PLL_Q_default 0x3 >> +#define PLL_RANGE_default 0x0 >> +#define PLL_BYPASS_default 0x1 >> +#define PLL_FSE_default 0x1 >> + >> +#define PLLOUT_DIV_default 0x0 >> +#define PLLOUT_DIV_BY_1_default 0x0 >> +#define PLLOUT_CLK_EN_default 0x0 >> + >> +#define PLL_CORECLKSEL_HFXIN 0x1 >> +#define PLL_CORECLKSEL_COREPLL 0x0 >> + >> +#define DEVICESRESET_DDR_CTRL_RST_N(x) (((x) & 0x1) << 0) >> +#define DEVICESRESET_DDR_AXI_RST_N(x) (((x) & 0x1) << 1) >> +#define DEVICESRESET_DDR_AHB_RST_N(x) (((x) & 0x1) << 2) >> +#define DEVICESRESET_DDR_PHY_RST_N(x) (((x) & 0x1) << 3) >> +#define DEVICESRESET_GEMGXL_RST_N(x) (((x) & 0x1) << 5) >> + >> +#define CLKMUX_STATUS_CORECLKPLLSEL (0x1 << 0) >> +#define CLKMUX_STATUS_TLCLKSEL (0x1 << 1) >> +#define CLKMUX_STATUS_RTCXSEL (0x1 << 2) >> +#define CLKMUX_STATUS_DDRCTRLCLKSEL (0x1 << 3) >> +#define CLKMUX_STATUS_DDRPHYCLKSEL (0x1 << 4) >> +#define CLKMUX_STATUS_GEMGXLCLKSEL (0x1 << 6) >> + >> +#endif // _SIFIVE_UX00PRCI_H > >> -- >> 2.17.1 >> > >Regards, >Anup
diff --git a/board/sifive/fu540/ccache.h b/board/sifive/fu540/ccache.h new file mode 100644 index 0000000000..0e5e40a1ef --- /dev/null +++ b/board/sifive/fu540/ccache.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2019 SiFive, Inc + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> + */ + +#ifndef FU540_CCACHE_H +#define FU540_CCACHE_H + +#include <asm/arch/cache.h> + +#ifndef __ASSEMBLER__ + +#include <stdint.h> +#include <linux/types.h> + +/* Block memory access until operation completed */ +static inline void ccache_barrier_0(void) +{ + asm volatile("fence rw, io" : : : "memory"); +} + +static inline void ccache_barrier_1(void) +{ + asm volatile("fence io, rw" : : : "memory"); +} + +/* Enable ways; allow cache to use these ways */ +static inline void ccache_enable_ways(u64 base_addr, u8 value) +{ + volatile u32 *enable = (volatile u32 *)(base_addr + + CCACHE_ENABLE); + ccache_barrier_0(); + (*enable) = value; + ccache_barrier_1(); +} + +#endif + +#endif /* FU540_CCACHE_H */ diff --git a/board/sifive/fu540/fu540-memory-map.h b/board/sifive/fu540/fu540-memory-map.h new file mode 100644 index 0000000000..c0df07d6fd --- /dev/null +++ b/board/sifive/fu540/fu540-memory-map.h @@ -0,0 +1,59 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2019 SiFive, Inc + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> + */ + +#ifndef FU540_MEMORY_MAP +#define FU540_MEMORY_MAP + +#include <linux/const.h> +#include <asm/arch/gpio.h> +#include <asm/arch/uart.h> +#include "ccache.h" +#include "i2c.h" +#include "spi.h" +#include "ux00prci.h" + +/**************************************************************************** + * Platform definitions + *****************************************************************************/ + +/* Memory map */ +#define CCACHE_CTRL_ADDR _AC(0x2010000, UL) +#define CCACHE_CTRL_SIZE _AC(0x1000, UL) + +#define GPIO_CTRL_ADDR _AC(0x10060000, UL) +#define GPIO_CTRL_SIZE _AC(0x1000, UL) + +#define PHYSICAL_FILTER_CTRL_ADDR _AC(0x100b8000, UL) +#define PHYSICAL_FILTER_CTRL_SIZE _AC(0x1000, UL) + +#define UART0_CTRL_ADDR _AC(0x10010000, UL) +#define UART0_CTRL_SIZE _AC(0x1000, UL) +#define UART1_CTRL_ADDR _AC(0x10011000, UL) +#define UART1_CTRL_SIZE _AC(0x1000, UL) +#ifndef UART_CTRL_ADDR +#define UART_CTRL_ADDR UART0_CTRL_ADDR +#endif +#ifndef UART_CTRL_SIZE +#define UART_CTRL_SIZE UART0_CTRL_SIZE +#endif +#define UX00DDR_CTRL_ADDR _AC(0x100b0000, UL) +#define UX00DDR_CTRL_SIZE _AC(0x4000, UL) +#define UX00PRCI_CTRL_ADDR _AC(0x10000000, UL) +#define UX00PRCI_CTRL_SIZE _AC(0x1000, UL) + +/* Helper functions */ +#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i))) + +#define UX00PRCI_REG(offset) \ + _REG32(UX00PRCI_CTRL_ADDR, \ + offset) +#define GPIO_REG(offset) _REG32(GPIO_CTRL_ADDR, offset) +#define UART0_REG(offset) _REG32(UART0_CTRL_ADDR, offset) + +#endif /* FU540_MEMORY_MAP */ diff --git a/board/sifive/fu540/regconfig-ctl.h b/board/sifive/fu540/regconfig-ctl.h new file mode 100644 index 0000000000..19a52e7996 --- /dev/null +++ b/board/sifive/fu540/regconfig-ctl.h @@ -0,0 +1,274 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2019 SiFive, Inc + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> + */ + +#define DENALI_CTL_00_DATA 0x00000a00 +#define DENALI_CTL_01_DATA 0x00000000 +#define DENALI_CTL_02_DATA 0x00000000 +#define DENALI_CTL_03_DATA 0x00000000 +#define DENALI_CTL_04_DATA 0x00000000 +#define DENALI_CTL_05_DATA 0x00000000 +#define DENALI_CTL_06_DATA 0x0000000a +#define DENALI_CTL_07_DATA 0x0002d362 +#define DENALI_CTL_08_DATA 0x00071073 +#define DENALI_CTL_09_DATA 0x0a1c0255 +#define DENALI_CTL_10_DATA 0x1c1c0400 +#define DENALI_CTL_11_DATA 0x0404990b +#define DENALI_CTL_12_DATA 0x2b050405 +#define DENALI_CTL_13_DATA 0x0e0c081e +#define DENALI_CTL_14_DATA 0x08090914 +#define DENALI_CTL_15_DATA 0x00fde718 +#define DENALI_CTL_16_DATA 0x00180a05 +#define DENALI_CTL_17_DATA 0x008b130e +#define DENALI_CTL_18_DATA 0x01000118 +#define DENALI_CTL_19_DATA 0x0e032101 +#define DENALI_CTL_20_DATA 0x00000000 +#define DENALI_CTL_21_DATA 0x00000101 +#define DENALI_CTL_22_DATA 0x00000000 +#define DENALI_CTL_23_DATA 0x0a000000 +#define DENALI_CTL_24_DATA 0x00000000 +#define DENALI_CTL_25_DATA 0x01450100 +#define DENALI_CTL_26_DATA 0x00001c36 +#define DENALI_CTL_27_DATA 0x00000005 +#define DENALI_CTL_28_DATA 0x00170006 +#define DENALI_CTL_29_DATA 0x014e0300 +#define DENALI_CTL_30_DATA 0x03010000 +#define DENALI_CTL_31_DATA 0x000a0e00 +#define DENALI_CTL_32_DATA 0x04030200 +#define DENALI_CTL_33_DATA 0x0000031f +#define DENALI_CTL_34_DATA 0x00070004 +#define DENALI_CTL_35_DATA 0x00000000 +#define DENALI_CTL_36_DATA 0x00000000 +#define DENALI_CTL_37_DATA 0x00000000 +#define DENALI_CTL_38_DATA 0x00000000 +#define DENALI_CTL_39_DATA 0x00000000 +#define DENALI_CTL_40_DATA 0x00000000 +#define DENALI_CTL_41_DATA 0x00000000 +#define DENALI_CTL_42_DATA 0x00000000 +#define DENALI_CTL_43_DATA 0x00000000 +#define DENALI_CTL_44_DATA 0x00000000 +#define DENALI_CTL_45_DATA 0x00000000 +#define DENALI_CTL_46_DATA 0x00000000 +#define DENALI_CTL_47_DATA 0x00000000 +#define DENALI_CTL_48_DATA 0x00000000 +#define DENALI_CTL_49_DATA 0x00000000 +#define DENALI_CTL_50_DATA 0x00000000 +#define DENALI_CTL_51_DATA 0x00000000 +#define DENALI_CTL_52_DATA 0x00000000 +#define DENALI_CTL_53_DATA 0x00000000 +#define DENALI_CTL_54_DATA 0x00000000 +#define DENALI_CTL_55_DATA 0x00000000 +#define DENALI_CTL_56_DATA 0x00000000 +#define DENALI_CTL_57_DATA 0x00000000 +#define DENALI_CTL_58_DATA 0x00000000 +#define DENALI_CTL_59_DATA 0x00000000 +#define DENALI_CTL_60_DATA 0x00000424 +#define DENALI_CTL_61_DATA 0x00000201 +#define DENALI_CTL_62_DATA 0x00001008 +#define DENALI_CTL_63_DATA 0x00000000 +#define DENALI_CTL_64_DATA 0x00000200 +#define DENALI_CTL_65_DATA 0x00000000 +#define DENALI_CTL_66_DATA 0x00000481 +#define DENALI_CTL_67_DATA 0x00000400 +#define DENALI_CTL_68_DATA 0x00000424 +#define DENALI_CTL_69_DATA 0x00000201 +#define DENALI_CTL_70_DATA 0x00001008 +#define DENALI_CTL_71_DATA 0x00000000 +#define DENALI_CTL_72_DATA 0x00000200 +#define DENALI_CTL_73_DATA 0x00000000 +#define DENALI_CTL_74_DATA 0x00000481 +#define DENALI_CTL_75_DATA 0x00000400 +#define DENALI_CTL_76_DATA 0x01010000 +#define DENALI_CTL_77_DATA 0x00000000 +#define DENALI_CTL_78_DATA 0x00000000 +#define DENALI_CTL_79_DATA 0x00000000 +#define DENALI_CTL_80_DATA 0x00000000 +#define DENALI_CTL_81_DATA 0x00000000 +#define DENALI_CTL_82_DATA 0x00000000 +#define DENALI_CTL_83_DATA 0x00000000 +#define DENALI_CTL_84_DATA 0x00000000 +#define DENALI_CTL_85_DATA 0x00000000 +#define DENALI_CTL_86_DATA 0x00000000 +#define DENALI_CTL_87_DATA 0x00000000 +#define DENALI_CTL_88_DATA 0x00000000 +#define DENALI_CTL_89_DATA 0x00000000 +#define DENALI_CTL_90_DATA 0x00000000 +#define DENALI_CTL_91_DATA 0x00000000 +#define DENALI_CTL_92_DATA 0x00000000 +#define DENALI_CTL_93_DATA 0x00000000 +#define DENALI_CTL_94_DATA 0x00000000 +#define DENALI_CTL_95_DATA 0x00000000 +#define DENALI_CTL_96_DATA 0x00000000 +#define DENALI_CTL_97_DATA 0x00000000 +#define DENALI_CTL_98_DATA 0x00000000 +#define DENALI_CTL_99_DATA 0x00000000 +#define DENALI_CTL_100_DATA 0x00000000 +#define DENALI_CTL_101_DATA 0x00000000 +#define DENALI_CTL_102_DATA 0x00000000 +#define DENALI_CTL_103_DATA 0x00000000 +#define DENALI_CTL_104_DATA 0x00000000 +#define DENALI_CTL_105_DATA 0x00000003 +#define DENALI_CTL_106_DATA 0x00000000 +#define DENALI_CTL_107_DATA 0x00000000 +#define DENALI_CTL_108_DATA 0x00000000 +#define DENALI_CTL_109_DATA 0x00000000 +#define DENALI_CTL_110_DATA 0x01000000 +#define DENALI_CTL_111_DATA 0x00040000 +#define DENALI_CTL_112_DATA 0x00800200 +#define DENALI_CTL_113_DATA 0x00000200 +#define DENALI_CTL_114_DATA 0x00000040 +#define DENALI_CTL_115_DATA 0x01000100 +#define DENALI_CTL_116_DATA 0x0a000002 +#define DENALI_CTL_117_DATA 0x0101ffff +#define DENALI_CTL_118_DATA 0x01010101 +#define DENALI_CTL_119_DATA 0x01010101 +#define DENALI_CTL_120_DATA 0x0000010b +#define DENALI_CTL_121_DATA 0x00000c01 +#define DENALI_CTL_122_DATA 0x00000000 +#define DENALI_CTL_123_DATA 0x00000000 +#define DENALI_CTL_124_DATA 0x00000000 +#define DENALI_CTL_125_DATA 0x00000000 +#define DENALI_CTL_126_DATA 0x00030300 +#define DENALI_CTL_127_DATA 0x00000000 +#define DENALI_CTL_128_DATA 0x00010001 +#define DENALI_CTL_129_DATA 0x00000000 +#define DENALI_CTL_130_DATA 0x00000000 +#define DENALI_CTL_131_DATA 0x00000000 +#define DENALI_CTL_132_DATA 0x00000000 +#define DENALI_CTL_133_DATA 0x00000000 +#define DENALI_CTL_134_DATA 0x00000000 +#define DENALI_CTL_135_DATA 0x00000000 +#define DENALI_CTL_136_DATA 0x00000000 +#define DENALI_CTL_137_DATA 0x00000000 +#define DENALI_CTL_138_DATA 0x00000000 +#define DENALI_CTL_139_DATA 0x00000000 +#define DENALI_CTL_140_DATA 0x00000000 +#define DENALI_CTL_141_DATA 0x00000000 +#define DENALI_CTL_142_DATA 0x00000000 +#define DENALI_CTL_143_DATA 0x00000000 +#define DENALI_CTL_144_DATA 0x00000000 +#define DENALI_CTL_145_DATA 0x00000000 +#define DENALI_CTL_146_DATA 0x00000000 +#define DENALI_CTL_147_DATA 0x00000000 +#define DENALI_CTL_148_DATA 0x00000000 +#define DENALI_CTL_149_DATA 0x00000000 +#define DENALI_CTL_150_DATA 0x00000000 +#define DENALI_CTL_151_DATA 0x00000000 +#define DENALI_CTL_152_DATA 0x00000000 +#define DENALI_CTL_153_DATA 0x00000000 +#define DENALI_CTL_154_DATA 0x00000000 +#define DENALI_CTL_155_DATA 0x00000000 +#define DENALI_CTL_156_DATA 0x00000000 +#define DENALI_CTL_157_DATA 0x00000000 +#define DENALI_CTL_158_DATA 0x00000000 +#define DENALI_CTL_159_DATA 0x00000000 +#define DENALI_CTL_160_DATA 0x00000000 +#define DENALI_CTL_161_DATA 0x02010102 +#define DENALI_CTL_162_DATA 0x0107070d +#define DENALI_CTL_163_DATA 0x04040400 +#define DENALI_CTL_164_DATA 0x03000503 +#define DENALI_CTL_165_DATA 0x00000000 +#define DENALI_CTL_166_DATA 0x00000000 +#define DENALI_CTL_167_DATA 0x00000000 +#define DENALI_CTL_168_DATA 0x00000000 +#define DENALI_CTL_169_DATA 0x280d0000 +#define DENALI_CTL_170_DATA 0x01000000 +#define DENALI_CTL_171_DATA 0x00000000 +#define DENALI_CTL_172_DATA 0x00010001 +#define DENALI_CTL_173_DATA 0x00000000 +#define DENALI_CTL_174_DATA 0x00000000 +#define DENALI_CTL_175_DATA 0x00000000 +#define DENALI_CTL_176_DATA 0x00000000 +#define DENALI_CTL_177_DATA 0x00000000 +#define DENALI_CTL_178_DATA 0x00000000 +#define DENALI_CTL_179_DATA 0x00000000 +#define DENALI_CTL_180_DATA 0x00000000 +#define DENALI_CTL_181_DATA 0x01000000 +#define DENALI_CTL_182_DATA 0x00000001 +#define DENALI_CTL_183_DATA 0x00000100 +#define DENALI_CTL_184_DATA 0x00000101 +#define DENALI_CTL_185_DATA 0x67676701 +#define DENALI_CTL_186_DATA 0x67676767 +#define DENALI_CTL_187_DATA 0x67676767 +#define DENALI_CTL_188_DATA 0x67676767 +#define DENALI_CTL_189_DATA 0x67676767 +#define DENALI_CTL_190_DATA 0x67676767 +#define DENALI_CTL_191_DATA 0x67676767 +#define DENALI_CTL_192_DATA 0x67676767 +#define DENALI_CTL_193_DATA 0x67676767 +#define DENALI_CTL_194_DATA 0x01000067 +#define DENALI_CTL_195_DATA 0x00000001 +#define DENALI_CTL_196_DATA 0x00000101 +#define DENALI_CTL_197_DATA 0x00000000 +#define DENALI_CTL_198_DATA 0x00000000 +#define DENALI_CTL_199_DATA 0x00000000 +#define DENALI_CTL_200_DATA 0x00000000 +#define DENALI_CTL_201_DATA 0x00000000 +#define DENALI_CTL_202_DATA 0x00000000 +#define DENALI_CTL_203_DATA 0x00000000 +#define DENALI_CTL_204_DATA 0x00000000 +#define DENALI_CTL_205_DATA 0x00000000 +#define DENALI_CTL_206_DATA 0x00000000 +#define DENALI_CTL_207_DATA 0x00000000 +#define DENALI_CTL_208_DATA 0x00000001 +#define DENALI_CTL_209_DATA 0x00000000 +#define DENALI_CTL_210_DATA 0x007fffff +#define DENALI_CTL_211_DATA 0x00000000 +#define DENALI_CTL_212_DATA 0x007fffff +#define DENALI_CTL_213_DATA 0x00000000 +#define DENALI_CTL_214_DATA 0x007fffff +#define DENALI_CTL_215_DATA 0x00000000 +#define DENALI_CTL_216_DATA 0x007fffff +#define DENALI_CTL_217_DATA 0x00000000 +#define DENALI_CTL_218_DATA 0x007fffff +#define DENALI_CTL_219_DATA 0x00000000 +#define DENALI_CTL_220_DATA 0x007fffff +#define DENALI_CTL_221_DATA 0x00000000 +#define DENALI_CTL_222_DATA 0x007fffff +#define DENALI_CTL_223_DATA 0x00000000 +#define DENALI_CTL_224_DATA 0x037fffff +#define DENALI_CTL_225_DATA 0xffffffff +#define DENALI_CTL_226_DATA 0x000f000f +#define DENALI_CTL_227_DATA 0x00ffff03 +#define DENALI_CTL_228_DATA 0x000fffff +#define DENALI_CTL_229_DATA 0x0003000f +#define DENALI_CTL_230_DATA 0xffffffff +#define DENALI_CTL_231_DATA 0x000f000f +#define DENALI_CTL_232_DATA 0x00ffff03 +#define DENALI_CTL_233_DATA 0x000fffff +#define DENALI_CTL_234_DATA 0x0003000f +#define DENALI_CTL_235_DATA 0xffffffff +#define DENALI_CTL_236_DATA 0x000f000f +#define DENALI_CTL_237_DATA 0x00ffff03 +#define DENALI_CTL_238_DATA 0x000fffff +#define DENALI_CTL_239_DATA 0x0003000f +#define DENALI_CTL_240_DATA 0xffffffff +#define DENALI_CTL_241_DATA 0x000f000f +#define DENALI_CTL_242_DATA 0x00ffff03 +#define DENALI_CTL_243_DATA 0x000fffff +#define DENALI_CTL_244_DATA 0x6407000f +#define DENALI_CTL_245_DATA 0x01640001 +#define DENALI_CTL_246_DATA 0x00000000 +#define DENALI_CTL_247_DATA 0x00000000 +#define DENALI_CTL_248_DATA 0x00001700 +#define DENALI_CTL_249_DATA 0x00386c05 +#define DENALI_CTL_250_DATA 0x02000200 +#define DENALI_CTL_251_DATA 0x02000200 +#define DENALI_CTL_252_DATA 0x0000386c +#define DENALI_CTL_253_DATA 0x00023438 +#define DENALI_CTL_254_DATA 0x02020d10 +#define DENALI_CTL_255_DATA 0x00140303 +#define DENALI_CTL_256_DATA 0x00000000 +#define DENALI_CTL_257_DATA 0x00000000 +#define DENALI_CTL_258_DATA 0x00001403 +#define DENALI_CTL_259_DATA 0x00000000 +#define DENALI_CTL_260_DATA 0x00000000 +#define DENALI_CTL_261_DATA 0x00000000 +#define DENALI_CTL_262_DATA 0x00000000 +#define DENALI_CTL_263_DATA 0x0d010000 +#define DENALI_CTL_264_DATA 0x00000008 diff --git a/board/sifive/fu540/regconfig-phy.h b/board/sifive/fu540/regconfig-phy.h new file mode 100644 index 0000000000..3450aecdf1 --- /dev/null +++ b/board/sifive/fu540/regconfig-phy.h @@ -0,0 +1,1224 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2019 SiFive, Inc + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> + */ + +#define DENALI_PHY_00_DATA 0x31706542 +#define DENALI_PHY_01_DATA 0x0004c008 +#define DENALI_PHY_02_DATA 0x000000da +#define DENALI_PHY_03_DATA 0x00000000 +#define DENALI_PHY_04_DATA 0x00000000 +#define DENALI_PHY_05_DATA 0x00010000 +#define DENALI_PHY_06_DATA 0x01DDDD90 +#define DENALI_PHY_07_DATA 0x01DDDD90 +#define DENALI_PHY_08_DATA 0x01030000 +#define DENALI_PHY_09_DATA 0x01000000 +#define DENALI_PHY_10_DATA 0x00c00000 +#define DENALI_PHY_11_DATA 0x00000007 +#define DENALI_PHY_12_DATA 0x00000000 +#define DENALI_PHY_13_DATA 0x00000000 +#define DENALI_PHY_14_DATA 0x04000408 +#define DENALI_PHY_15_DATA 0x00000408 +#define DENALI_PHY_16_DATA 0x00e4e400 +#define DENALI_PHY_17_DATA 0x00000000 +#define DENALI_PHY_18_DATA 0x00000000 +#define DENALI_PHY_19_DATA 0x00000000 +#define DENALI_PHY_20_DATA 0x00000000 +#define DENALI_PHY_21_DATA 0x00000000 +#define DENALI_PHY_22_DATA 0x00000000 +#define DENALI_PHY_23_DATA 0x00000000 +#define DENALI_PHY_24_DATA 0x00000000 +#define DENALI_PHY_25_DATA 0x00000000 +#define DENALI_PHY_26_DATA 0x00000000 +#define DENALI_PHY_27_DATA 0x00000000 +#define DENALI_PHY_28_DATA 0x00000000 +#define DENALI_PHY_29_DATA 0x00000000 +#define DENALI_PHY_30_DATA 0x00000000 +#define DENALI_PHY_31_DATA 0x00000000 +#define DENALI_PHY_32_DATA 0x00000000 +#define DENALI_PHY_33_DATA 0x00200000 +#define DENALI_PHY_34_DATA 0x00000000 +#define DENALI_PHY_35_DATA 0x00000000 +#define DENALI_PHY_36_DATA 0x00000000 +#define DENALI_PHY_37_DATA 0x00000000 +#define DENALI_PHY_38_DATA 0x00000000 +#define DENALI_PHY_39_DATA 0x00000000 +#define DENALI_PHY_40_DATA 0x02800280 +#define DENALI_PHY_41_DATA 0x02800280 +#define DENALI_PHY_42_DATA 0x02800280 +#define DENALI_PHY_43_DATA 0x02800280 +#define DENALI_PHY_44_DATA 0x00000280 +#define DENALI_PHY_45_DATA 0x00000000 +#define DENALI_PHY_46_DATA 0x00000000 +#define DENALI_PHY_47_DATA 0x00000000 +#define DENALI_PHY_48_DATA 0x00000000 +#define DENALI_PHY_49_DATA 0x00000000 +#define DENALI_PHY_50_DATA 0x00800080 +#define DENALI_PHY_51_DATA 0x00800080 +#define DENALI_PHY_52_DATA 0x00800080 +#define DENALI_PHY_53_DATA 0x00800080 +#define DENALI_PHY_54_DATA 0x00800080 +#define DENALI_PHY_55_DATA 0x00800080 +#define DENALI_PHY_56_DATA 0x00800080 +#define DENALI_PHY_57_DATA 0x00800080 +#define DENALI_PHY_58_DATA 0x00800080 +#define DENALI_PHY_59_DATA 0x000100da +#define DENALI_PHY_60_DATA 0x01000200 +#define DENALI_PHY_61_DATA 0x00000000 +#define DENALI_PHY_62_DATA 0x00000000 +#define DENALI_PHY_63_DATA 0x00000002 +#define DENALI_PHY_64_DATA 0x51313152 +#define DENALI_PHY_65_DATA 0x80013130 +#define DENALI_PHY_66_DATA 0x02000080 +#define DENALI_PHY_67_DATA 0x00100001 +#define DENALI_PHY_68_DATA 0x0c064208 +#define DENALI_PHY_69_DATA 0x000f0c0f +#define DENALI_PHY_70_DATA 0x01000140 +#define DENALI_PHY_71_DATA 0x0000000c +#define DENALI_PHY_72_DATA 0x00000000 +#define DENALI_PHY_73_DATA 0x00000000 +#define DENALI_PHY_74_DATA 0x00000000 +#define DENALI_PHY_75_DATA 0x00000000 +#define DENALI_PHY_76_DATA 0x00000000 +#define DENALI_PHY_77_DATA 0x00000000 +#define DENALI_PHY_78_DATA 0x00000000 +#define DENALI_PHY_79_DATA 0x00000000 +#define DENALI_PHY_80_DATA 0x00000000 +#define DENALI_PHY_81_DATA 0x00000000 +#define DENALI_PHY_82_DATA 0x00000000 +#define DENALI_PHY_83_DATA 0x00000000 +#define DENALI_PHY_84_DATA 0x00000000 +#define DENALI_PHY_85_DATA 0x00000000 +#define DENALI_PHY_86_DATA 0x00000000 +#define DENALI_PHY_87_DATA 0x00000000 +#define DENALI_PHY_88_DATA 0x00000000 +#define DENALI_PHY_89_DATA 0x00000000 +#define DENALI_PHY_90_DATA 0x00000000 +#define DENALI_PHY_91_DATA 0x00000000 +#define DENALI_PHY_92_DATA 0x00000000 +#define DENALI_PHY_93_DATA 0x00000000 +#define DENALI_PHY_94_DATA 0x00000000 +#define DENALI_PHY_95_DATA 0x00000000 +#define DENALI_PHY_96_DATA 0x00000000 +#define DENALI_PHY_97_DATA 0x00000000 +#define DENALI_PHY_98_DATA 0x00000000 +#define DENALI_PHY_99_DATA 0x00000000 +#define DENALI_PHY_100_DATA 0x00000000 +#define DENALI_PHY_101_DATA 0x00000000 +#define DENALI_PHY_102_DATA 0x00000000 +#define DENALI_PHY_103_DATA 0x00000000 +#define DENALI_PHY_104_DATA 0x00000000 +#define DENALI_PHY_105_DATA 0x00000000 +#define DENALI_PHY_106_DATA 0x00000000 +#define DENALI_PHY_107_DATA 0x00000000 +#define DENALI_PHY_108_DATA 0x00000000 +#define DENALI_PHY_109_DATA 0x00000000 +#define DENALI_PHY_110_DATA 0x00000000 +#define DENALI_PHY_111_DATA 0x00000000 +#define DENALI_PHY_112_DATA 0x00000000 +#define DENALI_PHY_113_DATA 0x00000000 +#define DENALI_PHY_114_DATA 0x00000000 +#define DENALI_PHY_115_DATA 0x00000000 +#define DENALI_PHY_116_DATA 0x00000000 +#define DENALI_PHY_117_DATA 0x00000000 +#define DENALI_PHY_118_DATA 0x00000000 +#define DENALI_PHY_119_DATA 0x00000000 +#define DENALI_PHY_120_DATA 0x00000000 +#define DENALI_PHY_121_DATA 0x00000000 +#define DENALI_PHY_122_DATA 0x00000000 +#define DENALI_PHY_123_DATA 0x00000000 +#define DENALI_PHY_124_DATA 0x00000000 +#define DENALI_PHY_125_DATA 0x00000000 +#define DENALI_PHY_126_DATA 0x00000000 +#define DENALI_PHY_127_DATA 0x00000000 +#define DENALI_PHY_128_DATA 0x40263571 +#define DENALI_PHY_129_DATA 0x0004c008 +#define DENALI_PHY_130_DATA 0x000000da +#define DENALI_PHY_131_DATA 0x00000000 +#define DENALI_PHY_132_DATA 0x00000000 +#define DENALI_PHY_133_DATA 0x00010000 +#define DENALI_PHY_134_DATA 0x01DDDD90 +#define DENALI_PHY_135_DATA 0x01DDDD90 +#define DENALI_PHY_136_DATA 0x01030000 +#define DENALI_PHY_137_DATA 0x01000000 +#define DENALI_PHY_138_DATA 0x00c00000 +#define DENALI_PHY_139_DATA 0x00000007 +#define DENALI_PHY_140_DATA 0x00000000 +#define DENALI_PHY_141_DATA 0x00000000 +#define DENALI_PHY_142_DATA 0x04000408 +#define DENALI_PHY_143_DATA 0x00000408 +#define DENALI_PHY_144_DATA 0x00e4e400 +#define DENALI_PHY_145_DATA 0x00000000 +#define DENALI_PHY_146_DATA 0x00000000 +#define DENALI_PHY_147_DATA 0x00000000 +#define DENALI_PHY_148_DATA 0x00000000 +#define DENALI_PHY_149_DATA 0x00000000 +#define DENALI_PHY_150_DATA 0x00000000 +#define DENALI_PHY_151_DATA 0x00000000 +#define DENALI_PHY_152_DATA 0x00000000 +#define DENALI_PHY_153_DATA 0x00000000 +#define DENALI_PHY_154_DATA 0x00000000 +#define DENALI_PHY_155_DATA 0x00000000 +#define DENALI_PHY_156_DATA 0x00000000 +#define DENALI_PHY_157_DATA 0x00000000 +#define DENALI_PHY_158_DATA 0x00000000 +#define DENALI_PHY_159_DATA 0x00000000 +#define DENALI_PHY_160_DATA 0x00000000 +#define DENALI_PHY_161_DATA 0x00200000 +#define DENALI_PHY_162_DATA 0x00000000 +#define DENALI_PHY_163_DATA 0x00000000 +#define DENALI_PHY_164_DATA 0x00000000 +#define DENALI_PHY_165_DATA 0x00000000 +#define DENALI_PHY_166_DATA 0x00000000 +#define DENALI_PHY_167_DATA 0x00000000 +#define DENALI_PHY_168_DATA 0x02800280 +#define DENALI_PHY_169_DATA 0x02800280 +#define DENALI_PHY_170_DATA 0x02800280 +#define DENALI_PHY_171_DATA 0x02800280 +#define DENALI_PHY_172_DATA 0x00000280 +#define DENALI_PHY_173_DATA 0x00000000 +#define DENALI_PHY_174_DATA 0x00000000 +#define DENALI_PHY_175_DATA 0x00000000 +#define DENALI_PHY_176_DATA 0x00000000 +#define DENALI_PHY_177_DATA 0x00000000 +#define DENALI_PHY_178_DATA 0x00800080 +#define DENALI_PHY_179_DATA 0x00800080 +#define DENALI_PHY_180_DATA 0x00800080 +#define DENALI_PHY_181_DATA 0x00800080 +#define DENALI_PHY_182_DATA 0x00800080 +#define DENALI_PHY_183_DATA 0x00800080 +#define DENALI_PHY_184_DATA 0x00800080 +#define DENALI_PHY_185_DATA 0x00800080 +#define DENALI_PHY_186_DATA 0x00800080 +#define DENALI_PHY_187_DATA 0x000100da +#define DENALI_PHY_188_DATA 0x01000200 +#define DENALI_PHY_189_DATA 0x00000000 +#define DENALI_PHY_190_DATA 0x00000000 +#define DENALI_PHY_191_DATA 0x00000002 +#define DENALI_PHY_192_DATA 0x51313152 +#define DENALI_PHY_193_DATA 0x80013130 +#define DENALI_PHY_194_DATA 0x02000080 +#define DENALI_PHY_195_DATA 0x00100001 +#define DENALI_PHY_196_DATA 0x0c064208 +#define DENALI_PHY_197_DATA 0x000f0c0f +#define DENALI_PHY_198_DATA 0x01000140 +#define DENALI_PHY_199_DATA 0x0000000c +#define DENALI_PHY_200_DATA 0x00000000 +#define DENALI_PHY_201_DATA 0x00000000 +#define DENALI_PHY_202_DATA 0x00000000 +#define DENALI_PHY_203_DATA 0x00000000 +#define DENALI_PHY_204_DATA 0x00000000 +#define DENALI_PHY_205_DATA 0x00000000 +#define DENALI_PHY_206_DATA 0x00000000 +#define DENALI_PHY_207_DATA 0x00000000 +#define DENALI_PHY_208_DATA 0x00000000 +#define DENALI_PHY_209_DATA 0x00000000 +#define DENALI_PHY_210_DATA 0x00000000 +#define DENALI_PHY_211_DATA 0x00000000 +#define DENALI_PHY_212_DATA 0x00000000 +#define DENALI_PHY_213_DATA 0x00000000 +#define DENALI_PHY_214_DATA 0x00000000 +#define DENALI_PHY_215_DATA 0x00000000 +#define DENALI_PHY_216_DATA 0x00000000 +#define DENALI_PHY_217_DATA 0x00000000 +#define DENALI_PHY_218_DATA 0x00000000 +#define DENALI_PHY_219_DATA 0x00000000 +#define DENALI_PHY_220_DATA 0x00000000 +#define DENALI_PHY_221_DATA 0x00000000 +#define DENALI_PHY_222_DATA 0x00000000 +#define DENALI_PHY_223_DATA 0x00000000 +#define DENALI_PHY_224_DATA 0x00000000 +#define DENALI_PHY_225_DATA 0x00000000 +#define DENALI_PHY_226_DATA 0x00000000 +#define DENALI_PHY_227_DATA 0x00000000 +#define DENALI_PHY_228_DATA 0x00000000 +#define DENALI_PHY_229_DATA 0x00000000 +#define DENALI_PHY_230_DATA 0x00000000 +#define DENALI_PHY_231_DATA 0x00000000 +#define DENALI_PHY_232_DATA 0x00000000 +#define DENALI_PHY_233_DATA 0x00000000 +#define DENALI_PHY_234_DATA 0x00000000 +#define DENALI_PHY_235_DATA 0x00000000 +#define DENALI_PHY_236_DATA 0x00000000 +#define DENALI_PHY_237_DATA 0x00000000 +#define DENALI_PHY_238_DATA 0x00000000 +#define DENALI_PHY_239_DATA 0x00000000 +#define DENALI_PHY_240_DATA 0x00000000 +#define DENALI_PHY_241_DATA 0x00000000 +#define DENALI_PHY_242_DATA 0x00000000 +#define DENALI_PHY_243_DATA 0x00000000 +#define DENALI_PHY_244_DATA 0x00000000 +#define DENALI_PHY_245_DATA 0x00000000 +#define DENALI_PHY_246_DATA 0x00000000 +#define DENALI_PHY_247_DATA 0x00000000 +#define DENALI_PHY_248_DATA 0x00000000 +#define DENALI_PHY_249_DATA 0x00000000 +#define DENALI_PHY_250_DATA 0x00000000 +#define DENALI_PHY_251_DATA 0x00000000 +#define DENALI_PHY_252_DATA 0x00000000 +#define DENALI_PHY_253_DATA 0x00000000 +#define DENALI_PHY_254_DATA 0x00000000 +#define DENALI_PHY_255_DATA 0x00000000 +#define DENALI_PHY_256_DATA 0x46052371 +#define DENALI_PHY_257_DATA 0x0004c008 +#define DENALI_PHY_258_DATA 0x000000da +#define DENALI_PHY_259_DATA 0x00000000 +#define DENALI_PHY_260_DATA 0x00000000 +#define DENALI_PHY_261_DATA 0x00010000 +#define DENALI_PHY_262_DATA 0x01DDDD90 +#define DENALI_PHY_263_DATA 0x01DDDD90 +#define DENALI_PHY_264_DATA 0x01030000 +#define DENALI_PHY_265_DATA 0x01000000 +#define DENALI_PHY_266_DATA 0x00c00000 +#define DENALI_PHY_267_DATA 0x00000007 +#define DENALI_PHY_268_DATA 0x00000000 +#define DENALI_PHY_269_DATA 0x00000000 +#define DENALI_PHY_270_DATA 0x04000408 +#define DENALI_PHY_271_DATA 0x00000408 +#define DENALI_PHY_272_DATA 0x00e4e400 +#define DENALI_PHY_273_DATA 0x00000000 +#define DENALI_PHY_274_DATA 0x00000000 +#define DENALI_PHY_275_DATA 0x00000000 +#define DENALI_PHY_276_DATA 0x00000000 +#define DENALI_PHY_277_DATA 0x00000000 +#define DENALI_PHY_278_DATA 0x00000000 +#define DENALI_PHY_279_DATA 0x00000000 +#define DENALI_PHY_280_DATA 0x00000000 +#define DENALI_PHY_281_DATA 0x00000000 +#define DENALI_PHY_282_DATA 0x00000000 +#define DENALI_PHY_283_DATA 0x00000000 +#define DENALI_PHY_284_DATA 0x00000000 +#define DENALI_PHY_285_DATA 0x00000000 +#define DENALI_PHY_286_DATA 0x00000000 +#define DENALI_PHY_287_DATA 0x00000000 +#define DENALI_PHY_288_DATA 0x00000000 +#define DENALI_PHY_289_DATA 0x00200000 +#define DENALI_PHY_290_DATA 0x00000000 +#define DENALI_PHY_291_DATA 0x00000000 +#define DENALI_PHY_292_DATA 0x00000000 +#define DENALI_PHY_293_DATA 0x00000000 +#define DENALI_PHY_294_DATA 0x00000000 +#define DENALI_PHY_295_DATA 0x00000000 +#define DENALI_PHY_296_DATA 0x02800280 +#define DENALI_PHY_297_DATA 0x02800280 +#define DENALI_PHY_298_DATA 0x02800280 +#define DENALI_PHY_299_DATA 0x02800280 +#define DENALI_PHY_300_DATA 0x00000280 +#define DENALI_PHY_301_DATA 0x00000000 +#define DENALI_PHY_302_DATA 0x00000000 +#define DENALI_PHY_303_DATA 0x00000000 +#define DENALI_PHY_304_DATA 0x00000000 +#define DENALI_PHY_305_DATA 0x00000000 +#define DENALI_PHY_306_DATA 0x00800080 +#define DENALI_PHY_307_DATA 0x00800080 +#define DENALI_PHY_308_DATA 0x00800080 +#define DENALI_PHY_309_DATA 0x00800080 +#define DENALI_PHY_310_DATA 0x00800080 +#define DENALI_PHY_311_DATA 0x00800080 +#define DENALI_PHY_312_DATA 0x00800080 +#define DENALI_PHY_313_DATA 0x00800080 +#define DENALI_PHY_314_DATA 0x00800080 +#define DENALI_PHY_315_DATA 0x000100da +#define DENALI_PHY_316_DATA 0x00000200 +#define DENALI_PHY_317_DATA 0x00000000 +#define DENALI_PHY_318_DATA 0x00000000 +#define DENALI_PHY_319_DATA 0x00000002 +#define DENALI_PHY_320_DATA 0x51313152 +#define DENALI_PHY_321_DATA 0x80013130 +#define DENALI_PHY_322_DATA 0x02000080 +#define DENALI_PHY_323_DATA 0x00100001 +#define DENALI_PHY_324_DATA 0x0c064208 +#define DENALI_PHY_325_DATA 0x000f0c0f +#define DENALI_PHY_326_DATA 0x01000140 +#define DENALI_PHY_327_DATA 0x0000000c +#define DENALI_PHY_328_DATA 0x00000000 +#define DENALI_PHY_329_DATA 0x00000000 +#define DENALI_PHY_330_DATA 0x00000000 +#define DENALI_PHY_331_DATA 0x00000000 +#define DENALI_PHY_332_DATA 0x00000000 +#define DENALI_PHY_333_DATA 0x00000000 +#define DENALI_PHY_334_DATA 0x00000000 +#define DENALI_PHY_335_DATA 0x00000000 +#define DENALI_PHY_336_DATA 0x00000000 +#define DENALI_PHY_337_DATA 0x00000000 +#define DENALI_PHY_338_DATA 0x00000000 +#define DENALI_PHY_339_DATA 0x00000000 +#define DENALI_PHY_340_DATA 0x00000000 +#define DENALI_PHY_341_DATA 0x00000000 +#define DENALI_PHY_342_DATA 0x00000000 +#define DENALI_PHY_343_DATA 0x00000000 +#define DENALI_PHY_344_DATA 0x00000000 +#define DENALI_PHY_345_DATA 0x00000000 +#define DENALI_PHY_346_DATA 0x00000000 +#define DENALI_PHY_347_DATA 0x00000000 +#define DENALI_PHY_348_DATA 0x00000000 +#define DENALI_PHY_349_DATA 0x00000000 +#define DENALI_PHY_350_DATA 0x00000000 +#define DENALI_PHY_351_DATA 0x00000000 +#define DENALI_PHY_352_DATA 0x00000000 +#define DENALI_PHY_353_DATA 0x00000000 +#define DENALI_PHY_354_DATA 0x00000000 +#define DENALI_PHY_355_DATA 0x00000000 +#define DENALI_PHY_356_DATA 0x00000000 +#define DENALI_PHY_357_DATA 0x00000000 +#define DENALI_PHY_358_DATA 0x00000000 +#define DENALI_PHY_359_DATA 0x00000000 +#define DENALI_PHY_360_DATA 0x00000000 +#define DENALI_PHY_361_DATA 0x00000000 +#define DENALI_PHY_362_DATA 0x00000000 +#define DENALI_PHY_363_DATA 0x00000000 +#define DENALI_PHY_364_DATA 0x00000000 +#define DENALI_PHY_365_DATA 0x00000000 +#define DENALI_PHY_366_DATA 0x00000000 +#define DENALI_PHY_367_DATA 0x00000000 +#define DENALI_PHY_368_DATA 0x00000000 +#define DENALI_PHY_369_DATA 0x00000000 +#define DENALI_PHY_370_DATA 0x00000000 +#define DENALI_PHY_371_DATA 0x00000000 +#define DENALI_PHY_372_DATA 0x00000000 +#define DENALI_PHY_373_DATA 0x00000000 +#define DENALI_PHY_374_DATA 0x00000000 +#define DENALI_PHY_375_DATA 0x00000000 +#define DENALI_PHY_376_DATA 0x00000000 +#define DENALI_PHY_377_DATA 0x00000000 +#define DENALI_PHY_378_DATA 0x00000000 +#define DENALI_PHY_379_DATA 0x00000000 +#define DENALI_PHY_380_DATA 0x00000000 +#define DENALI_PHY_381_DATA 0x00000000 +#define DENALI_PHY_382_DATA 0x00000000 +#define DENALI_PHY_383_DATA 0x00000000 +#define DENALI_PHY_384_DATA 0x37654120 +#define DENALI_PHY_385_DATA 0x0004c008 +#define DENALI_PHY_386_DATA 0x000000da +#define DENALI_PHY_387_DATA 0x00000000 +#define DENALI_PHY_388_DATA 0x00000000 +#define DENALI_PHY_389_DATA 0x00010000 +#define DENALI_PHY_390_DATA 0x01DDDD90 +#define DENALI_PHY_391_DATA 0x01DDDD90 +#define DENALI_PHY_392_DATA 0x01030000 +#define DENALI_PHY_393_DATA 0x01000000 +#define DENALI_PHY_394_DATA 0x00c00000 +#define DENALI_PHY_395_DATA 0x00000007 +#define DENALI_PHY_396_DATA 0x00000000 +#define DENALI_PHY_397_DATA 0x00000000 +#define DENALI_PHY_398_DATA 0x04000408 +#define DENALI_PHY_399_DATA 0x00000408 +#define DENALI_PHY_400_DATA 0x00e4e400 +#define DENALI_PHY_401_DATA 0x00000000 +#define DENALI_PHY_402_DATA 0x00000000 +#define DENALI_PHY_403_DATA 0x00000000 +#define DENALI_PHY_404_DATA 0x00000000 +#define DENALI_PHY_405_DATA 0x00000000 +#define DENALI_PHY_406_DATA 0x00000000 +#define DENALI_PHY_407_DATA 0x00000000 +#define DENALI_PHY_408_DATA 0x00000000 +#define DENALI_PHY_409_DATA 0x00000000 +#define DENALI_PHY_410_DATA 0x00000000 +#define DENALI_PHY_411_DATA 0x00000000 +#define DENALI_PHY_412_DATA 0x00000000 +#define DENALI_PHY_413_DATA 0x00000000 +#define DENALI_PHY_414_DATA 0x00000000 +#define DENALI_PHY_415_DATA 0x00000000 +#define DENALI_PHY_416_DATA 0x00000000 +#define DENALI_PHY_417_DATA 0x00200000 +#define DENALI_PHY_418_DATA 0x00000000 +#define DENALI_PHY_419_DATA 0x00000000 +#define DENALI_PHY_420_DATA 0x00000000 +#define DENALI_PHY_421_DATA 0x00000000 +#define DENALI_PHY_422_DATA 0x00000000 +#define DENALI_PHY_423_DATA 0x00000000 +#define DENALI_PHY_424_DATA 0x02800280 +#define DENALI_PHY_425_DATA 0x02800280 +#define DENALI_PHY_426_DATA 0x02800280 +#define DENALI_PHY_427_DATA 0x02800280 +#define DENALI_PHY_428_DATA 0x00000280 +#define DENALI_PHY_429_DATA 0x00000000 +#define DENALI_PHY_430_DATA 0x00000000 +#define DENALI_PHY_431_DATA 0x00000000 +#define DENALI_PHY_432_DATA 0x00000000 +#define DENALI_PHY_433_DATA 0x00000000 +#define DENALI_PHY_434_DATA 0x00800080 +#define DENALI_PHY_435_DATA 0x00800080 +#define DENALI_PHY_436_DATA 0x00800080 +#define DENALI_PHY_437_DATA 0x00800080 +#define DENALI_PHY_438_DATA 0x00800080 +#define DENALI_PHY_439_DATA 0x00800080 +#define DENALI_PHY_440_DATA 0x00800080 +#define DENALI_PHY_441_DATA 0x00800080 +#define DENALI_PHY_442_DATA 0x00800080 +#define DENALI_PHY_443_DATA 0x000100da +#define DENALI_PHY_444_DATA 0x00000200 +#define DENALI_PHY_445_DATA 0x00000000 +#define DENALI_PHY_446_DATA 0x00000000 +#define DENALI_PHY_447_DATA 0x00000002 +#define DENALI_PHY_448_DATA 0x51313152 +#define DENALI_PHY_449_DATA 0x80013130 +#define DENALI_PHY_450_DATA 0x02000080 +#define DENALI_PHY_451_DATA 0x00100001 +#define DENALI_PHY_452_DATA 0x0c064208 +#define DENALI_PHY_453_DATA 0x000f0c0f +#define DENALI_PHY_454_DATA 0x01000140 +#define DENALI_PHY_455_DATA 0x0000000c +#define DENALI_PHY_456_DATA 0x00000000 +#define DENALI_PHY_457_DATA 0x00000000 +#define DENALI_PHY_458_DATA 0x00000000 +#define DENALI_PHY_459_DATA 0x00000000 +#define DENALI_PHY_460_DATA 0x00000000 +#define DENALI_PHY_461_DATA 0x00000000 +#define DENALI_PHY_462_DATA 0x00000000 +#define DENALI_PHY_463_DATA 0x00000000 +#define DENALI_PHY_464_DATA 0x00000000 +#define DENALI_PHY_465_DATA 0x00000000 +#define DENALI_PHY_466_DATA 0x00000000 +#define DENALI_PHY_467_DATA 0x00000000 +#define DENALI_PHY_468_DATA 0x00000000 +#define DENALI_PHY_469_DATA 0x00000000 +#define DENALI_PHY_470_DATA 0x00000000 +#define DENALI_PHY_471_DATA 0x00000000 +#define DENALI_PHY_472_DATA 0x00000000 +#define DENALI_PHY_473_DATA 0x00000000 +#define DENALI_PHY_474_DATA 0x00000000 +#define DENALI_PHY_475_DATA 0x00000000 +#define DENALI_PHY_476_DATA 0x00000000 +#define DENALI_PHY_477_DATA 0x00000000 +#define DENALI_PHY_478_DATA 0x00000000 +#define DENALI_PHY_479_DATA 0x00000000 +#define DENALI_PHY_480_DATA 0x00000000 +#define DENALI_PHY_481_DATA 0x00000000 +#define DENALI_PHY_482_DATA 0x00000000 +#define DENALI_PHY_483_DATA 0x00000000 +#define DENALI_PHY_484_DATA 0x00000000 +#define DENALI_PHY_485_DATA 0x00000000 +#define DENALI_PHY_486_DATA 0x00000000 +#define DENALI_PHY_487_DATA 0x00000000 +#define DENALI_PHY_488_DATA 0x00000000 +#define DENALI_PHY_489_DATA 0x00000000 +#define DENALI_PHY_490_DATA 0x00000000 +#define DENALI_PHY_491_DATA 0x00000000 +#define DENALI_PHY_492_DATA 0x00000000 +#define DENALI_PHY_493_DATA 0x00000000 +#define DENALI_PHY_494_DATA 0x00000000 +#define DENALI_PHY_495_DATA 0x00000000 +#define DENALI_PHY_496_DATA 0x00000000 +#define DENALI_PHY_497_DATA 0x00000000 +#define DENALI_PHY_498_DATA 0x00000000 +#define DENALI_PHY_499_DATA 0x00000000 +#define DENALI_PHY_500_DATA 0x00000000 +#define DENALI_PHY_501_DATA 0x00000000 +#define DENALI_PHY_502_DATA 0x00000000 +#define DENALI_PHY_503_DATA 0x00000000 +#define DENALI_PHY_504_DATA 0x00000000 +#define DENALI_PHY_505_DATA 0x00000000 +#define DENALI_PHY_506_DATA 0x00000000 +#define DENALI_PHY_507_DATA 0x00000000 +#define DENALI_PHY_508_DATA 0x00000000 +#define DENALI_PHY_509_DATA 0x00000000 +#define DENALI_PHY_510_DATA 0x00000000 +#define DENALI_PHY_511_DATA 0x00000000 +#define DENALI_PHY_512_DATA 0x24316750 +#define DENALI_PHY_513_DATA 0x0004c008 +#define DENALI_PHY_514_DATA 0x000000da +#define DENALI_PHY_515_DATA 0x00000000 +#define DENALI_PHY_516_DATA 0x00000000 +#define DENALI_PHY_517_DATA 0x00010000 +#define DENALI_PHY_518_DATA 0x01DDDD90 +#define DENALI_PHY_519_DATA 0x01DDDD90 +#define DENALI_PHY_520_DATA 0x01030000 +#define DENALI_PHY_521_DATA 0x01000000 +#define DENALI_PHY_522_DATA 0x00c00000 +#define DENALI_PHY_523_DATA 0x00000007 +#define DENALI_PHY_524_DATA 0x00000000 +#define DENALI_PHY_525_DATA 0x00000000 +#define DENALI_PHY_526_DATA 0x04000408 +#define DENALI_PHY_527_DATA 0x00000408 +#define DENALI_PHY_528_DATA 0x00e4e400 +#define DENALI_PHY_529_DATA 0x00000000 +#define DENALI_PHY_530_DATA 0x00000000 +#define DENALI_PHY_531_DATA 0x00000000 +#define DENALI_PHY_532_DATA 0x00000000 +#define DENALI_PHY_533_DATA 0x00000000 +#define DENALI_PHY_534_DATA 0x00000000 +#define DENALI_PHY_535_DATA 0x00000000 +#define DENALI_PHY_536_DATA 0x00000000 +#define DENALI_PHY_537_DATA 0x00000000 +#define DENALI_PHY_538_DATA 0x00000000 +#define DENALI_PHY_539_DATA 0x00000000 +#define DENALI_PHY_540_DATA 0x00000000 +#define DENALI_PHY_541_DATA 0x00000000 +#define DENALI_PHY_542_DATA 0x00000000 +#define DENALI_PHY_543_DATA 0x00000000 +#define DENALI_PHY_544_DATA 0x00000000 +#define DENALI_PHY_545_DATA 0x00200000 +#define DENALI_PHY_546_DATA 0x00000000 +#define DENALI_PHY_547_DATA 0x00000000 +#define DENALI_PHY_548_DATA 0x00000000 +#define DENALI_PHY_549_DATA 0x00000000 +#define DENALI_PHY_550_DATA 0x00000000 +#define DENALI_PHY_551_DATA 0x00000000 +#define DENALI_PHY_552_DATA 0x02800280 +#define DENALI_PHY_553_DATA 0x02800280 +#define DENALI_PHY_554_DATA 0x02800280 +#define DENALI_PHY_555_DATA 0x02800280 +#define DENALI_PHY_556_DATA 0x00000280 +#define DENALI_PHY_557_DATA 0x00000000 +#define DENALI_PHY_558_DATA 0x00000000 +#define DENALI_PHY_559_DATA 0x00000000 +#define DENALI_PHY_560_DATA 0x00000000 +#define DENALI_PHY_561_DATA 0x00000000 +#define DENALI_PHY_562_DATA 0x00800080 +#define DENALI_PHY_563_DATA 0x00800080 +#define DENALI_PHY_564_DATA 0x00800080 +#define DENALI_PHY_565_DATA 0x00800080 +#define DENALI_PHY_566_DATA 0x00800080 +#define DENALI_PHY_567_DATA 0x00800080 +#define DENALI_PHY_568_DATA 0x00800080 +#define DENALI_PHY_569_DATA 0x00800080 +#define DENALI_PHY_570_DATA 0x00800080 +#define DENALI_PHY_571_DATA 0x000100da +#define DENALI_PHY_572_DATA 0x00000200 +#define DENALI_PHY_573_DATA 0x00000000 +#define DENALI_PHY_574_DATA 0x00000000 +#define DENALI_PHY_575_DATA 0x00000002 +#define DENALI_PHY_576_DATA 0x51313152 +#define DENALI_PHY_577_DATA 0x80013130 +#define DENALI_PHY_578_DATA 0x02000080 +#define DENALI_PHY_579_DATA 0x00100001 +#define DENALI_PHY_580_DATA 0x0c064208 +#define DENALI_PHY_581_DATA 0x000f0c0f +#define DENALI_PHY_582_DATA 0x01000140 +#define DENALI_PHY_583_DATA 0x0000000c +#define DENALI_PHY_584_DATA 0x00000000 +#define DENALI_PHY_585_DATA 0x00000000 +#define DENALI_PHY_586_DATA 0x00000000 +#define DENALI_PHY_587_DATA 0x00000000 +#define DENALI_PHY_588_DATA 0x00000000 +#define DENALI_PHY_589_DATA 0x00000000 +#define DENALI_PHY_590_DATA 0x00000000 +#define DENALI_PHY_591_DATA 0x00000000 +#define DENALI_PHY_592_DATA 0x00000000 +#define DENALI_PHY_593_DATA 0x00000000 +#define DENALI_PHY_594_DATA 0x00000000 +#define DENALI_PHY_595_DATA 0x00000000 +#define DENALI_PHY_596_DATA 0x00000000 +#define DENALI_PHY_597_DATA 0x00000000 +#define DENALI_PHY_598_DATA 0x00000000 +#define DENALI_PHY_599_DATA 0x00000000 +#define DENALI_PHY_600_DATA 0x00000000 +#define DENALI_PHY_601_DATA 0x00000000 +#define DENALI_PHY_602_DATA 0x00000000 +#define DENALI_PHY_603_DATA 0x00000000 +#define DENALI_PHY_604_DATA 0x00000000 +#define DENALI_PHY_605_DATA 0x00000000 +#define DENALI_PHY_606_DATA 0x00000000 +#define DENALI_PHY_607_DATA 0x00000000 +#define DENALI_PHY_608_DATA 0x00000000 +#define DENALI_PHY_609_DATA 0x00000000 +#define DENALI_PHY_610_DATA 0x00000000 +#define DENALI_PHY_611_DATA 0x00000000 +#define DENALI_PHY_612_DATA 0x00000000 +#define DENALI_PHY_613_DATA 0x00000000 +#define DENALI_PHY_614_DATA 0x00000000 +#define DENALI_PHY_615_DATA 0x00000000 +#define DENALI_PHY_616_DATA 0x00000000 +#define DENALI_PHY_617_DATA 0x00000000 +#define DENALI_PHY_618_DATA 0x00000000 +#define DENALI_PHY_619_DATA 0x00000000 +#define DENALI_PHY_620_DATA 0x00000000 +#define DENALI_PHY_621_DATA 0x00000000 +#define DENALI_PHY_622_DATA 0x00000000 +#define DENALI_PHY_623_DATA 0x00000000 +#define DENALI_PHY_624_DATA 0x00000000 +#define DENALI_PHY_625_DATA 0x00000000 +#define DENALI_PHY_626_DATA 0x00000000 +#define DENALI_PHY_627_DATA 0x00000000 +#define DENALI_PHY_628_DATA 0x00000000 +#define DENALI_PHY_629_DATA 0x00000000 +#define DENALI_PHY_630_DATA 0x00000000 +#define DENALI_PHY_631_DATA 0x00000000 +#define DENALI_PHY_632_DATA 0x00000000 +#define DENALI_PHY_633_DATA 0x00000000 +#define DENALI_PHY_634_DATA 0x00000000 +#define DENALI_PHY_635_DATA 0x00000000 +#define DENALI_PHY_636_DATA 0x00000000 +#define DENALI_PHY_637_DATA 0x00000000 +#define DENALI_PHY_638_DATA 0x00000000 +#define DENALI_PHY_639_DATA 0x00000000 +#define DENALI_PHY_640_DATA 0x35174620 +#define DENALI_PHY_641_DATA 0x0004c008 +#define DENALI_PHY_642_DATA 0x000000da +#define DENALI_PHY_643_DATA 0x00000000 +#define DENALI_PHY_644_DATA 0x00000000 +#define DENALI_PHY_645_DATA 0x00010000 +#define DENALI_PHY_646_DATA 0x01DDDD90 +#define DENALI_PHY_647_DATA 0x01DDDD90 +#define DENALI_PHY_648_DATA 0x01030000 +#define DENALI_PHY_649_DATA 0x01000000 +#define DENALI_PHY_650_DATA 0x00c00000 +#define DENALI_PHY_651_DATA 0x00000007 +#define DENALI_PHY_652_DATA 0x00000000 +#define DENALI_PHY_653_DATA 0x00000000 +#define DENALI_PHY_654_DATA 0x04000408 +#define DENALI_PHY_655_DATA 0x00000408 +#define DENALI_PHY_656_DATA 0x00e4e400 +#define DENALI_PHY_657_DATA 0x00000000 +#define DENALI_PHY_658_DATA 0x00000000 +#define DENALI_PHY_659_DATA 0x00000000 +#define DENALI_PHY_660_DATA 0x00000000 +#define DENALI_PHY_661_DATA 0x00000000 +#define DENALI_PHY_662_DATA 0x00000000 +#define DENALI_PHY_663_DATA 0x00000000 +#define DENALI_PHY_664_DATA 0x00000000 +#define DENALI_PHY_665_DATA 0x00000000 +#define DENALI_PHY_666_DATA 0x00000000 +#define DENALI_PHY_667_DATA 0x00000000 +#define DENALI_PHY_668_DATA 0x00000000 +#define DENALI_PHY_669_DATA 0x00000000 +#define DENALI_PHY_670_DATA 0x00000000 +#define DENALI_PHY_671_DATA 0x00000000 +#define DENALI_PHY_672_DATA 0x00000000 +#define DENALI_PHY_673_DATA 0x00200000 +#define DENALI_PHY_674_DATA 0x00000000 +#define DENALI_PHY_675_DATA 0x00000000 +#define DENALI_PHY_676_DATA 0x00000000 +#define DENALI_PHY_677_DATA 0x00000000 +#define DENALI_PHY_678_DATA 0x00000000 +#define DENALI_PHY_679_DATA 0x00000000 +#define DENALI_PHY_680_DATA 0x02800280 +#define DENALI_PHY_681_DATA 0x02800280 +#define DENALI_PHY_682_DATA 0x02800280 +#define DENALI_PHY_683_DATA 0x02800280 +#define DENALI_PHY_684_DATA 0x00000280 +#define DENALI_PHY_685_DATA 0x00000000 +#define DENALI_PHY_686_DATA 0x00000000 +#define DENALI_PHY_687_DATA 0x00000000 +#define DENALI_PHY_688_DATA 0x00000000 +#define DENALI_PHY_689_DATA 0x00000000 +#define DENALI_PHY_690_DATA 0x00800080 +#define DENALI_PHY_691_DATA 0x00800080 +#define DENALI_PHY_692_DATA 0x00800080 +#define DENALI_PHY_693_DATA 0x00800080 +#define DENALI_PHY_694_DATA 0x00800080 +#define DENALI_PHY_695_DATA 0x00800080 +#define DENALI_PHY_696_DATA 0x00800080 +#define DENALI_PHY_697_DATA 0x00800080 +#define DENALI_PHY_698_DATA 0x00800080 +#define DENALI_PHY_699_DATA 0x000100da +#define DENALI_PHY_700_DATA 0x00000200 +#define DENALI_PHY_701_DATA 0x00000000 +#define DENALI_PHY_702_DATA 0x00000000 +#define DENALI_PHY_703_DATA 0x00000002 +#define DENALI_PHY_704_DATA 0x51313152 +#define DENALI_PHY_705_DATA 0x80013130 +#define DENALI_PHY_706_DATA 0x02000080 +#define DENALI_PHY_707_DATA 0x00100001 +#define DENALI_PHY_708_DATA 0x0c064208 +#define DENALI_PHY_709_DATA 0x000f0c0f +#define DENALI_PHY_710_DATA 0x01000140 +#define DENALI_PHY_711_DATA 0x0000000c +#define DENALI_PHY_712_DATA 0x00000000 +#define DENALI_PHY_713_DATA 0x00000000 +#define DENALI_PHY_714_DATA 0x00000000 +#define DENALI_PHY_715_DATA 0x00000000 +#define DENALI_PHY_716_DATA 0x00000000 +#define DENALI_PHY_717_DATA 0x00000000 +#define DENALI_PHY_718_DATA 0x00000000 +#define DENALI_PHY_719_DATA 0x00000000 +#define DENALI_PHY_720_DATA 0x00000000 +#define DENALI_PHY_721_DATA 0x00000000 +#define DENALI_PHY_722_DATA 0x00000000 +#define DENALI_PHY_723_DATA 0x00000000 +#define DENALI_PHY_724_DATA 0x00000000 +#define DENALI_PHY_725_DATA 0x00000000 +#define DENALI_PHY_726_DATA 0x00000000 +#define DENALI_PHY_727_DATA 0x00000000 +#define DENALI_PHY_728_DATA 0x00000000 +#define DENALI_PHY_729_DATA 0x00000000 +#define DENALI_PHY_730_DATA 0x00000000 +#define DENALI_PHY_731_DATA 0x00000000 +#define DENALI_PHY_732_DATA 0x00000000 +#define DENALI_PHY_733_DATA 0x00000000 +#define DENALI_PHY_734_DATA 0x00000000 +#define DENALI_PHY_735_DATA 0x00000000 +#define DENALI_PHY_736_DATA 0x00000000 +#define DENALI_PHY_737_DATA 0x00000000 +#define DENALI_PHY_738_DATA 0x00000000 +#define DENALI_PHY_739_DATA 0x00000000 +#define DENALI_PHY_740_DATA 0x00000000 +#define DENALI_PHY_741_DATA 0x00000000 +#define DENALI_PHY_742_DATA 0x00000000 +#define DENALI_PHY_743_DATA 0x00000000 +#define DENALI_PHY_744_DATA 0x00000000 +#define DENALI_PHY_745_DATA 0x00000000 +#define DENALI_PHY_746_DATA 0x00000000 +#define DENALI_PHY_747_DATA 0x00000000 +#define DENALI_PHY_748_DATA 0x00000000 +#define DENALI_PHY_749_DATA 0x00000000 +#define DENALI_PHY_750_DATA 0x00000000 +#define DENALI_PHY_751_DATA 0x00000000 +#define DENALI_PHY_752_DATA 0x00000000 +#define DENALI_PHY_753_DATA 0x00000000 +#define DENALI_PHY_754_DATA 0x00000000 +#define DENALI_PHY_755_DATA 0x00000000 +#define DENALI_PHY_756_DATA 0x00000000 +#define DENALI_PHY_757_DATA 0x00000000 +#define DENALI_PHY_758_DATA 0x00000000 +#define DENALI_PHY_759_DATA 0x00000000 +#define DENALI_PHY_760_DATA 0x00000000 +#define DENALI_PHY_761_DATA 0x00000000 +#define DENALI_PHY_762_DATA 0x00000000 +#define DENALI_PHY_763_DATA 0x00000000 +#define DENALI_PHY_764_DATA 0x00000000 +#define DENALI_PHY_765_DATA 0x00000000 +#define DENALI_PHY_766_DATA 0x00000000 +#define DENALI_PHY_767_DATA 0x00000000 +#define DENALI_PHY_768_DATA 0x15203476 +#define DENALI_PHY_769_DATA 0x0004c008 +#define DENALI_PHY_770_DATA 0x000000da +#define DENALI_PHY_771_DATA 0x00000000 +#define DENALI_PHY_772_DATA 0x00000000 +#define DENALI_PHY_773_DATA 0x00010000 +#define DENALI_PHY_774_DATA 0x01DDDD90 +#define DENALI_PHY_775_DATA 0x01DDDD90 +#define DENALI_PHY_776_DATA 0x01030000 +#define DENALI_PHY_777_DATA 0x01000000 +#define DENALI_PHY_778_DATA 0x00c00000 +#define DENALI_PHY_779_DATA 0x00000007 +#define DENALI_PHY_780_DATA 0x00000000 +#define DENALI_PHY_781_DATA 0x00000000 +#define DENALI_PHY_782_DATA 0x04000408 +#define DENALI_PHY_783_DATA 0x00000408 +#define DENALI_PHY_784_DATA 0x00e4e400 +#define DENALI_PHY_785_DATA 0x00000000 +#define DENALI_PHY_786_DATA 0x00000000 +#define DENALI_PHY_787_DATA 0x00000000 +#define DENALI_PHY_788_DATA 0x00000000 +#define DENALI_PHY_789_DATA 0x00000000 +#define DENALI_PHY_790_DATA 0x00000000 +#define DENALI_PHY_791_DATA 0x00000000 +#define DENALI_PHY_792_DATA 0x00000000 +#define DENALI_PHY_793_DATA 0x00000000 +#define DENALI_PHY_794_DATA 0x00000000 +#define DENALI_PHY_795_DATA 0x00000000 +#define DENALI_PHY_796_DATA 0x00000000 +#define DENALI_PHY_797_DATA 0x00000000 +#define DENALI_PHY_798_DATA 0x00000000 +#define DENALI_PHY_799_DATA 0x00000000 +#define DENALI_PHY_800_DATA 0x00000000 +#define DENALI_PHY_801_DATA 0x00200000 +#define DENALI_PHY_802_DATA 0x00000000 +#define DENALI_PHY_803_DATA 0x00000000 +#define DENALI_PHY_804_DATA 0x00000000 +#define DENALI_PHY_805_DATA 0x00000000 +#define DENALI_PHY_806_DATA 0x00000000 +#define DENALI_PHY_807_DATA 0x00000000 +#define DENALI_PHY_808_DATA 0x02800280 +#define DENALI_PHY_809_DATA 0x02800280 +#define DENALI_PHY_810_DATA 0x02800280 +#define DENALI_PHY_811_DATA 0x02800280 +#define DENALI_PHY_812_DATA 0x00000280 +#define DENALI_PHY_813_DATA 0x00000000 +#define DENALI_PHY_814_DATA 0x00000000 +#define DENALI_PHY_815_DATA 0x00000000 +#define DENALI_PHY_816_DATA 0x00000000 +#define DENALI_PHY_817_DATA 0x00000000 +#define DENALI_PHY_818_DATA 0x00800080 +#define DENALI_PHY_819_DATA 0x00800080 +#define DENALI_PHY_820_DATA 0x00800080 +#define DENALI_PHY_821_DATA 0x00800080 +#define DENALI_PHY_822_DATA 0x00800080 +#define DENALI_PHY_823_DATA 0x00800080 +#define DENALI_PHY_824_DATA 0x00800080 +#define DENALI_PHY_825_DATA 0x00800080 +#define DENALI_PHY_826_DATA 0x00800080 +#define DENALI_PHY_827_DATA 0x000100da +#define DENALI_PHY_828_DATA 0x00000200 +#define DENALI_PHY_829_DATA 0x00000000 +#define DENALI_PHY_830_DATA 0x00000000 +#define DENALI_PHY_831_DATA 0x00000002 +#define DENALI_PHY_832_DATA 0x51313152 +#define DENALI_PHY_833_DATA 0x80013130 +#define DENALI_PHY_834_DATA 0x02000080 +#define DENALI_PHY_835_DATA 0x00100001 +#define DENALI_PHY_836_DATA 0x0c064208 +#define DENALI_PHY_837_DATA 0x000f0c0f +#define DENALI_PHY_838_DATA 0x01000140 +#define DENALI_PHY_839_DATA 0x0000000c +#define DENALI_PHY_840_DATA 0x00000000 +#define DENALI_PHY_841_DATA 0x00000000 +#define DENALI_PHY_842_DATA 0x00000000 +#define DENALI_PHY_843_DATA 0x00000000 +#define DENALI_PHY_844_DATA 0x00000000 +#define DENALI_PHY_845_DATA 0x00000000 +#define DENALI_PHY_846_DATA 0x00000000 +#define DENALI_PHY_847_DATA 0x00000000 +#define DENALI_PHY_848_DATA 0x00000000 +#define DENALI_PHY_849_DATA 0x00000000 +#define DENALI_PHY_850_DATA 0x00000000 +#define DENALI_PHY_851_DATA 0x00000000 +#define DENALI_PHY_852_DATA 0x00000000 +#define DENALI_PHY_853_DATA 0x00000000 +#define DENALI_PHY_854_DATA 0x00000000 +#define DENALI_PHY_855_DATA 0x00000000 +#define DENALI_PHY_856_DATA 0x00000000 +#define DENALI_PHY_857_DATA 0x00000000 +#define DENALI_PHY_858_DATA 0x00000000 +#define DENALI_PHY_859_DATA 0x00000000 +#define DENALI_PHY_860_DATA 0x00000000 +#define DENALI_PHY_861_DATA 0x00000000 +#define DENALI_PHY_862_DATA 0x00000000 +#define DENALI_PHY_863_DATA 0x00000000 +#define DENALI_PHY_864_DATA 0x00000000 +#define DENALI_PHY_865_DATA 0x00000000 +#define DENALI_PHY_866_DATA 0x00000000 +#define DENALI_PHY_867_DATA 0x00000000 +#define DENALI_PHY_868_DATA 0x00000000 +#define DENALI_PHY_869_DATA 0x00000000 +#define DENALI_PHY_870_DATA 0x00000000 +#define DENALI_PHY_871_DATA 0x00000000 +#define DENALI_PHY_872_DATA 0x00000000 +#define DENALI_PHY_873_DATA 0x00000000 +#define DENALI_PHY_874_DATA 0x00000000 +#define DENALI_PHY_875_DATA 0x00000000 +#define DENALI_PHY_876_DATA 0x00000000 +#define DENALI_PHY_877_DATA 0x00000000 +#define DENALI_PHY_878_DATA 0x00000000 +#define DENALI_PHY_879_DATA 0x00000000 +#define DENALI_PHY_880_DATA 0x00000000 +#define DENALI_PHY_881_DATA 0x00000000 +#define DENALI_PHY_882_DATA 0x00000000 +#define DENALI_PHY_883_DATA 0x00000000 +#define DENALI_PHY_884_DATA 0x00000000 +#define DENALI_PHY_885_DATA 0x00000000 +#define DENALI_PHY_886_DATA 0x00000000 +#define DENALI_PHY_887_DATA 0x00000000 +#define DENALI_PHY_888_DATA 0x00000000 +#define DENALI_PHY_889_DATA 0x00000000 +#define DENALI_PHY_890_DATA 0x00000000 +#define DENALI_PHY_891_DATA 0x00000000 +#define DENALI_PHY_892_DATA 0x00000000 +#define DENALI_PHY_893_DATA 0x00000000 +#define DENALI_PHY_894_DATA 0x00000000 +#define DENALI_PHY_895_DATA 0x00000000 +#define DENALI_PHY_896_DATA 0x41753206 +#define DENALI_PHY_897_DATA 0x0004c008 +#define DENALI_PHY_898_DATA 0x000000da +#define DENALI_PHY_899_DATA 0x00000000 +#define DENALI_PHY_900_DATA 0x00000000 +#define DENALI_PHY_901_DATA 0x00010000 +#define DENALI_PHY_902_DATA 0x01DDDD90 +#define DENALI_PHY_903_DATA 0x01DDDD90 +#define DENALI_PHY_904_DATA 0x01030000 +#define DENALI_PHY_905_DATA 0x01000000 +#define DENALI_PHY_906_DATA 0x00c00000 +#define DENALI_PHY_907_DATA 0x00000007 +#define DENALI_PHY_908_DATA 0x00000000 +#define DENALI_PHY_909_DATA 0x00000000 +#define DENALI_PHY_910_DATA 0x04000408 +#define DENALI_PHY_911_DATA 0x00000408 +#define DENALI_PHY_912_DATA 0x00e4e400 +#define DENALI_PHY_913_DATA 0x00000000 +#define DENALI_PHY_914_DATA 0x00000000 +#define DENALI_PHY_915_DATA 0x00000000 +#define DENALI_PHY_916_DATA 0x00000000 +#define DENALI_PHY_917_DATA 0x00000000 +#define DENALI_PHY_918_DATA 0x00000000 +#define DENALI_PHY_919_DATA 0x00000000 +#define DENALI_PHY_920_DATA 0x00000000 +#define DENALI_PHY_921_DATA 0x00000000 +#define DENALI_PHY_922_DATA 0x00000000 +#define DENALI_PHY_923_DATA 0x00000000 +#define DENALI_PHY_924_DATA 0x00000000 +#define DENALI_PHY_925_DATA 0x00000000 +#define DENALI_PHY_926_DATA 0x00000000 +#define DENALI_PHY_927_DATA 0x00000000 +#define DENALI_PHY_928_DATA 0x00000000 +#define DENALI_PHY_929_DATA 0x00200000 +#define DENALI_PHY_930_DATA 0x00000000 +#define DENALI_PHY_931_DATA 0x00000000 +#define DENALI_PHY_932_DATA 0x00000000 +#define DENALI_PHY_933_DATA 0x00000000 +#define DENALI_PHY_934_DATA 0x00000000 +#define DENALI_PHY_935_DATA 0x00000000 +#define DENALI_PHY_936_DATA 0x02800280 +#define DENALI_PHY_937_DATA 0x02800280 +#define DENALI_PHY_938_DATA 0x02800280 +#define DENALI_PHY_939_DATA 0x02800280 +#define DENALI_PHY_940_DATA 0x00000280 +#define DENALI_PHY_941_DATA 0x00000000 +#define DENALI_PHY_942_DATA 0x00000000 +#define DENALI_PHY_943_DATA 0x00000000 +#define DENALI_PHY_944_DATA 0x00000000 +#define DENALI_PHY_945_DATA 0x00000000 +#define DENALI_PHY_946_DATA 0x00800080 +#define DENALI_PHY_947_DATA 0x00800080 +#define DENALI_PHY_948_DATA 0x00800080 +#define DENALI_PHY_949_DATA 0x00800080 +#define DENALI_PHY_950_DATA 0x00800080 +#define DENALI_PHY_951_DATA 0x00800080 +#define DENALI_PHY_952_DATA 0x00800080 +#define DENALI_PHY_953_DATA 0x00800080 +#define DENALI_PHY_954_DATA 0x00800080 +#define DENALI_PHY_955_DATA 0x000100da +#define DENALI_PHY_956_DATA 0x00000200 +#define DENALI_PHY_957_DATA 0x00000000 +#define DENALI_PHY_958_DATA 0x00000000 +#define DENALI_PHY_959_DATA 0x00000002 +#define DENALI_PHY_960_DATA 0x51313152 +#define DENALI_PHY_961_DATA 0x80013130 +#define DENALI_PHY_962_DATA 0x02000080 +#define DENALI_PHY_963_DATA 0x00100001 +#define DENALI_PHY_964_DATA 0x0c064208 +#define DENALI_PHY_965_DATA 0x000f0c0f +#define DENALI_PHY_966_DATA 0x01000140 +#define DENALI_PHY_967_DATA 0x0000000c +#define DENALI_PHY_968_DATA 0x00000000 +#define DENALI_PHY_969_DATA 0x00000000 +#define DENALI_PHY_970_DATA 0x00000000 +#define DENALI_PHY_971_DATA 0x00000000 +#define DENALI_PHY_972_DATA 0x00000000 +#define DENALI_PHY_973_DATA 0x00000000 +#define DENALI_PHY_974_DATA 0x00000000 +#define DENALI_PHY_975_DATA 0x00000000 +#define DENALI_PHY_976_DATA 0x00000000 +#define DENALI_PHY_977_DATA 0x00000000 +#define DENALI_PHY_978_DATA 0x00000000 +#define DENALI_PHY_979_DATA 0x00000000 +#define DENALI_PHY_980_DATA 0x00000000 +#define DENALI_PHY_981_DATA 0x00000000 +#define DENALI_PHY_982_DATA 0x00000000 +#define DENALI_PHY_983_DATA 0x00000000 +#define DENALI_PHY_984_DATA 0x00000000 +#define DENALI_PHY_985_DATA 0x00000000 +#define DENALI_PHY_986_DATA 0x00000000 +#define DENALI_PHY_987_DATA 0x00000000 +#define DENALI_PHY_988_DATA 0x00000000 +#define DENALI_PHY_989_DATA 0x00000000 +#define DENALI_PHY_990_DATA 0x00000000 +#define DENALI_PHY_991_DATA 0x00000000 +#define DENALI_PHY_992_DATA 0x00000000 +#define DENALI_PHY_993_DATA 0x00000000 +#define DENALI_PHY_994_DATA 0x00000000 +#define DENALI_PHY_995_DATA 0x00000000 +#define DENALI_PHY_996_DATA 0x00000000 +#define DENALI_PHY_997_DATA 0x00000000 +#define DENALI_PHY_998_DATA 0x00000000 +#define DENALI_PHY_999_DATA 0x00000000 +#define DENALI_PHY_1000_DATA 0x00000000 +#define DENALI_PHY_1001_DATA 0x00000000 +#define DENALI_PHY_1002_DATA 0x00000000 +#define DENALI_PHY_1003_DATA 0x00000000 +#define DENALI_PHY_1004_DATA 0x00000000 +#define DENALI_PHY_1005_DATA 0x00000000 +#define DENALI_PHY_1006_DATA 0x00000000 +#define DENALI_PHY_1007_DATA 0x00000000 +#define DENALI_PHY_1008_DATA 0x00000000 +#define DENALI_PHY_1009_DATA 0x00000000 +#define DENALI_PHY_1010_DATA 0x00000000 +#define DENALI_PHY_1011_DATA 0x00000000 +#define DENALI_PHY_1012_DATA 0x00000000 +#define DENALI_PHY_1013_DATA 0x00000000 +#define DENALI_PHY_1014_DATA 0x00000000 +#define DENALI_PHY_1015_DATA 0x00000000 +#define DENALI_PHY_1016_DATA 0x00000000 +#define DENALI_PHY_1017_DATA 0x00000000 +#define DENALI_PHY_1018_DATA 0x00000000 +#define DENALI_PHY_1019_DATA 0x00000000 +#define DENALI_PHY_1020_DATA 0x00000000 +#define DENALI_PHY_1021_DATA 0x00000000 +#define DENALI_PHY_1022_DATA 0x00000000 +#define DENALI_PHY_1023_DATA 0x00000000 +#define DENALI_PHY_1024_DATA 0x36025174 +#define DENALI_PHY_1025_DATA 0x0004c008 +#define DENALI_PHY_1026_DATA 0x000000da +#define DENALI_PHY_1027_DATA 0x00000000 +#define DENALI_PHY_1028_DATA 0x00000000 +#define DENALI_PHY_1029_DATA 0x00010000 +#define DENALI_PHY_1030_DATA 0x01DDDD90 +#define DENALI_PHY_1031_DATA 0x01DDDD90 +#define DENALI_PHY_1032_DATA 0x01030000 +#define DENALI_PHY_1033_DATA 0x01000000 +#define DENALI_PHY_1034_DATA 0x00c00000 +#define DENALI_PHY_1035_DATA 0x00000007 +#define DENALI_PHY_1036_DATA 0x00000000 +#define DENALI_PHY_1037_DATA 0x00000000 +#define DENALI_PHY_1038_DATA 0x04000408 +#define DENALI_PHY_1039_DATA 0x00000408 +#define DENALI_PHY_1040_DATA 0x00e4e400 +#define DENALI_PHY_1041_DATA 0x00000000 +#define DENALI_PHY_1042_DATA 0x00000000 +#define DENALI_PHY_1043_DATA 0x00000000 +#define DENALI_PHY_1044_DATA 0x00000000 +#define DENALI_PHY_1045_DATA 0x00000000 +#define DENALI_PHY_1046_DATA 0x00000000 +#define DENALI_PHY_1047_DATA 0x00000000 +#define DENALI_PHY_1048_DATA 0x00000000 +#define DENALI_PHY_1049_DATA 0x00000000 +#define DENALI_PHY_1050_DATA 0x00000000 +#define DENALI_PHY_1051_DATA 0x00000000 +#define DENALI_PHY_1052_DATA 0x00000000 +#define DENALI_PHY_1053_DATA 0x00000000 +#define DENALI_PHY_1054_DATA 0x00000000 +#define DENALI_PHY_1055_DATA 0x00000000 +#define DENALI_PHY_1056_DATA 0x00000000 +#define DENALI_PHY_1057_DATA 0x00200000 +#define DENALI_PHY_1058_DATA 0x00000000 +#define DENALI_PHY_1059_DATA 0x00000000 +#define DENALI_PHY_1060_DATA 0x00000000 +#define DENALI_PHY_1061_DATA 0x00000000 +#define DENALI_PHY_1062_DATA 0x00000000 +#define DENALI_PHY_1063_DATA 0x00000000 +#define DENALI_PHY_1064_DATA 0x02800280 +#define DENALI_PHY_1065_DATA 0x02800280 +#define DENALI_PHY_1066_DATA 0x02800280 +#define DENALI_PHY_1067_DATA 0x02800280 +#define DENALI_PHY_1068_DATA 0x00000280 +#define DENALI_PHY_1069_DATA 0x00000000 +#define DENALI_PHY_1070_DATA 0x00000000 +#define DENALI_PHY_1071_DATA 0x00000000 +#define DENALI_PHY_1072_DATA 0x00000000 +#define DENALI_PHY_1073_DATA 0x00000000 +#define DENALI_PHY_1074_DATA 0x00800080 +#define DENALI_PHY_1075_DATA 0x00800080 +#define DENALI_PHY_1076_DATA 0x00800080 +#define DENALI_PHY_1077_DATA 0x00800080 +#define DENALI_PHY_1078_DATA 0x00800080 +#define DENALI_PHY_1079_DATA 0x00800080 +#define DENALI_PHY_1080_DATA 0x00800080 +#define DENALI_PHY_1081_DATA 0x00800080 +#define DENALI_PHY_1082_DATA 0x00800080 +#define DENALI_PHY_1083_DATA 0x000100da +#define DENALI_PHY_1084_DATA 0x00000200 +#define DENALI_PHY_1085_DATA 0x00000000 +#define DENALI_PHY_1086_DATA 0x00000000 +#define DENALI_PHY_1087_DATA 0x00000002 +#define DENALI_PHY_1088_DATA 0x51313152 +#define DENALI_PHY_1089_DATA 0x80013130 +#define DENALI_PHY_1090_DATA 0x02000080 +#define DENALI_PHY_1091_DATA 0x00100001 +#define DENALI_PHY_1092_DATA 0x0c064208 +#define DENALI_PHY_1093_DATA 0x000f0c0f +#define DENALI_PHY_1094_DATA 0x01000140 +#define DENALI_PHY_1095_DATA 0x0000000c +#define DENALI_PHY_1096_DATA 0x00000000 +#define DENALI_PHY_1097_DATA 0x00000000 +#define DENALI_PHY_1098_DATA 0x00000000 +#define DENALI_PHY_1099_DATA 0x00000000 +#define DENALI_PHY_1100_DATA 0x00000000 +#define DENALI_PHY_1101_DATA 0x00000000 +#define DENALI_PHY_1102_DATA 0x00000000 +#define DENALI_PHY_1103_DATA 0x00000000 +#define DENALI_PHY_1104_DATA 0x00000000 +#define DENALI_PHY_1105_DATA 0x00000000 +#define DENALI_PHY_1106_DATA 0x00000000 +#define DENALI_PHY_1107_DATA 0x00000000 +#define DENALI_PHY_1108_DATA 0x00000000 +#define DENALI_PHY_1109_DATA 0x00000000 +#define DENALI_PHY_1110_DATA 0x00000000 +#define DENALI_PHY_1111_DATA 0x00000000 +#define DENALI_PHY_1112_DATA 0x00000000 +#define DENALI_PHY_1113_DATA 0x00000000 +#define DENALI_PHY_1114_DATA 0x00000000 +#define DENALI_PHY_1115_DATA 0x00000000 +#define DENALI_PHY_1116_DATA 0x00000000 +#define DENALI_PHY_1117_DATA 0x00000000 +#define DENALI_PHY_1118_DATA 0x00000000 +#define DENALI_PHY_1119_DATA 0x00000000 +#define DENALI_PHY_1120_DATA 0x00000000 +#define DENALI_PHY_1121_DATA 0x00000000 +#define DENALI_PHY_1122_DATA 0x00000000 +#define DENALI_PHY_1123_DATA 0x00000000 +#define DENALI_PHY_1124_DATA 0x00000000 +#define DENALI_PHY_1125_DATA 0x00000000 +#define DENALI_PHY_1126_DATA 0x00000000 +#define DENALI_PHY_1127_DATA 0x00000000 +#define DENALI_PHY_1128_DATA 0x00000000 +#define DENALI_PHY_1129_DATA 0x00000000 +#define DENALI_PHY_1130_DATA 0x00000000 +#define DENALI_PHY_1131_DATA 0x00000000 +#define DENALI_PHY_1132_DATA 0x00000000 +#define DENALI_PHY_1133_DATA 0x00000000 +#define DENALI_PHY_1134_DATA 0x00000000 +#define DENALI_PHY_1135_DATA 0x00000000 +#define DENALI_PHY_1136_DATA 0x00000000 +#define DENALI_PHY_1137_DATA 0x00000000 +#define DENALI_PHY_1138_DATA 0x00000000 +#define DENALI_PHY_1139_DATA 0x00000000 +#define DENALI_PHY_1140_DATA 0x00000000 +#define DENALI_PHY_1141_DATA 0x00000000 +#define DENALI_PHY_1142_DATA 0x00000000 +#define DENALI_PHY_1143_DATA 0x00000000 +#define DENALI_PHY_1144_DATA 0x00000000 +#define DENALI_PHY_1145_DATA 0x00000000 +#define DENALI_PHY_1146_DATA 0x00000000 +#define DENALI_PHY_1147_DATA 0x00000000 +#define DENALI_PHY_1148_DATA 0x00000000 +#define DENALI_PHY_1149_DATA 0x00000000 +#define DENALI_PHY_1150_DATA 0x00000000 +#define DENALI_PHY_1151_DATA 0x00000000 +#define DENALI_PHY_1152_DATA 0x00000000 +#define DENALI_PHY_1153_DATA 0x00000000 +#define DENALI_PHY_1154_DATA 0x00050000 +#define DENALI_PHY_1155_DATA 0x00000000 +#define DENALI_PHY_1156_DATA 0x00000000 +#define DENALI_PHY_1157_DATA 0x00000000 +#define DENALI_PHY_1158_DATA 0x00000100 +#define DENALI_PHY_1159_DATA 0x00000000 +#define DENALI_PHY_1160_DATA 0x00000000 +#define DENALI_PHY_1161_DATA 0x00506401 +#define DENALI_PHY_1162_DATA 0x01221102 +#define DENALI_PHY_1163_DATA 0x00000122 +#define DENALI_PHY_1164_DATA 0x00000000 +#define DENALI_PHY_1165_DATA 0x000B1F00 +#define DENALI_PHY_1166_DATA 0x0B1F0B1F +#define DENALI_PHY_1167_DATA 0x0B1F0B1B +#define DENALI_PHY_1168_DATA 0x0B1F0B1F +#define DENALI_PHY_1169_DATA 0x0B1F0B1F +#define DENALI_PHY_1170_DATA 0x00000B00 +#define DENALI_PHY_1171_DATA 0x42080010 +#define DENALI_PHY_1172_DATA 0x01000100 +#define DENALI_PHY_1173_DATA 0x01000100 +#define DENALI_PHY_1174_DATA 0x01000100 +#define DENALI_PHY_1175_DATA 0x01000100 +#define DENALI_PHY_1176_DATA 0x00000000 +#define DENALI_PHY_1177_DATA 0x00000000 +#define DENALI_PHY_1178_DATA 0x00000000 +#define DENALI_PHY_1179_DATA 0x00000000 +#define DENALI_PHY_1180_DATA 0x00000000 +#define DENALI_PHY_1181_DATA 0x00000803 +#define DENALI_PHY_1182_DATA 0x223FFF00 +#define DENALI_PHY_1183_DATA 0x000008FF +#define DENALI_PHY_1184_DATA 0x0000057F +#define DENALI_PHY_1185_DATA 0x0000057F +#define DENALI_PHY_1186_DATA 0x00037FFF +#define DENALI_PHY_1187_DATA 0x00037FFF +#define DENALI_PHY_1188_DATA 0x00004410 +#define DENALI_PHY_1189_DATA 0x00004410 +#define DENALI_PHY_1190_DATA 0x00004410 +#define DENALI_PHY_1191_DATA 0x00004410 +#define DENALI_PHY_1192_DATA 0x00004410 +#define DENALI_PHY_1193_DATA 0x00037FFF +#define DENALI_PHY_1194_DATA 0x00037FFF +#define DENALI_PHY_1195_DATA 0x00000000 +#define DENALI_PHY_1196_DATA 0x00000000 +#define DENALI_PHY_1197_DATA 0x00000000 +#define DENALI_PHY_1198_DATA 0x04000000 +#define DENALI_PHY_1199_DATA 0x00000000 +#define DENALI_PHY_1200_DATA 0x00000000 +#define DENALI_PHY_1201_DATA 0x00000108 +#define DENALI_PHY_1202_DATA 0x00000000 +#define DENALI_PHY_1203_DATA 0x00000000 +#define DENALI_PHY_1204_DATA 0x00000000 +#define DENALI_PHY_1205_DATA 0x00000001 +#define DENALI_PHY_1206_DATA 0x00000000 +#define DENALI_PHY_1207_DATA 0x00000000 +#define DENALI_PHY_1208_DATA 0x00000000 +#define DENALI_PHY_1209_DATA 0x00000000 +#define DENALI_PHY_1210_DATA 0x00000000 +#define DENALI_PHY_1211_DATA 0x00000000 +#define DENALI_PHY_1212_DATA 0x00020100 +#define DENALI_PHY_1213_DATA 0x00000000 +#define DENALI_PHY_1214_DATA 0x00000000 diff --git a/board/sifive/fu540/ux00ddr.h b/board/sifive/fu540/ux00ddr.h new file mode 100644 index 0000000000..2b96397852 --- /dev/null +++ b/board/sifive/fu540/ux00ddr.h @@ -0,0 +1,276 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2019 SiFive, Inc + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> + */ + +#ifndef FU540_UX00DDR_H +#define FU540_UX00DDR_H + +#ifndef __ASSEMBLER__ + +#include <stdint.h> +#include <stddef.h> +#include <stdbool.h> + +extern u32 ddr_phy_settings[1215]; +extern u32 ddr_ctl_settings[265]; + +#define _REG32(p, i) (*(volatile uint32_t *)((p) + (i))) + +#define DRAM_CLASS_OFFSET 8 +#define DRAM_CLASS_DDR4 0xA +#define OPTIMAL_RMODW_EN_OFFSET 0 +#define DISABLE_RD_INTERLEAVE_OFFSET 16 +#define OUT_OF_RANGE_OFFSET 1 +#define MULTIPLE_OUT_OF_RANGE_OFFSET 2 +#define PORT_COMMAND_CHANNEL_ERROR_OFFSET 7 +#define MC_INIT_COMPLETE_OFFSET 8 +#define LEVELING_OPERATION_COMPLETED_OFFSET 22 +#define DFI_PHY_WRLELV_MODE_OFFSET 24 +#define DFI_PHY_RDLVL_MODE_OFFSET 24 +#define DFI_PHY_RDLVL_GATE_MODE_OFFSET 0 +#define VREF_EN_OFFSET 24 +#define PORT_ADDR_PROTECTION_EN_OFFSET 0 +#define AXI0_ADDRESS_RANGE_ENABLE 8 +#define AXI0_RANGE_PROT_BITS_0_OFFSET 24 +#define RDLVL_EN_OFFSET 16 +#define RDLVL_GATE_EN_OFFSET 24 +#define WRLVL_EN_OFFSET 0 + +#define PHY_RX_CAL_DQ0_0_OFFSET 0 +#define PHY_RX_CAL_DQ1_0_OFFSET 16 + +static inline void phy_reset(volatile u32 *ddrphyreg, const + u32 *physettings) +{ + unsigned int i; + + for (i = 1152; i <= 1214; i++) { + u32 physet = physettings[i]; + /*if (physet!=0)*/ ddrphyreg[i] = physet; + } + + for (i = 0; i <= 1151; i++) { + u32 physet = physettings[i]; + /*if (physet!=0)*/ ddrphyreg[i] = physet; + } +} + +static inline void ux00ddr_writeregmap(size_t ahbregaddr, const + u32 *ctlsettings, const u32 *physettings) +{ + volatile u32 *ddrctlreg = (volatile u32 *)ahbregaddr; + volatile u32 *ddrphyreg = ((volatile u32 *)ahbregaddr) + + (0x2000 / sizeof(u32)); + + unsigned int i; + + for (i = 0; i <= 264; i++) { + u32 ctlset = ctlsettings[i]; + /*if (ctlset!=0)*/ ddrctlreg[i] = ctlset; + } + + phy_reset(ddrphyreg, physettings); +} + +static inline void ux00ddr_start(size_t ahbregaddr, size_t filteraddr, + size_t ddrend) +{ + // START register at ddrctl register base offset 0 + u32 regdata = _REG32(0 << 2, ahbregaddr); + + regdata |= 0x1; + _REG32(0 << 2, ahbregaddr) = regdata; + + /* + * WAIT for initialization complete : bit 8 of INT_STATUS + * (DENALI_CTL_132) 0x210 + */ + while ((_REG32(132 << 2, ahbregaddr) & (1 << + MC_INIT_COMPLETE_OFFSET)) == 0) { + } + + // Disable the BusBlocker in front of the controller AXI slave ports + volatile u64 *filterreg = (volatile u64 *)filteraddr; + + filterreg[0] = 0x0f00000000000000UL | (ddrend >> 2); +} + +static inline void ux00ddr_mask_mc_init_complete_interrupt(size_t + ahbregaddr) +{ + /* + * Mask off Bit 8 of Interrupt Status + * Bit [8] The MC initialization has been completed + */ + + _REG32(136 << 2, ahbregaddr) |= (1 << MC_INIT_COMPLETE_OFFSET); +} + +static inline void ux00ddr_mask_outofrange_interrupts(size_t ahbregaddr) +{ + /* + * Mask off Bit 8, Bit 2 and Bit 1 of Interrupt Status + * Bit [2] Multiple accesses outside the defined PHYSICAL memory + * space have occurred + * Bit [1] A memory access outside the defined PHYSICAL memory + * space has occurred + */ + + _REG32(136 << 2, ahbregaddr) |= ((1 << OUT_OF_RANGE_OFFSET) | (1 << + MULTIPLE_OUT_OF_RANGE_OFFSET)); +} + +static inline void ux00ddr_mask_port_command_error_interrupt(size_t + ahbregaddr) +{ + /* + * Mask off Bit 7 of Interrupt Status + * Bit [7] An error occurred on the port command channel + */ + + _REG32(136 << 2, ahbregaddr) |= (1 << + PORT_COMMAND_CHANNEL_ERROR_OFFSET); +} + +static inline void ux00ddr_mask_leveling_completed_interrupt(size_t + ahbregaddr) +{ + /* + * Mask off Bit 22 of Interrupt Status + * Bit [22] The leveling operation has completed + */ + + _REG32(136 << 2, ahbregaddr) |= (1 << + LEVELING_OPERATION_COMPLETED_OFFSET); +} + +static inline void ux00ddr_setuprangeprotection(size_t ahbregaddr, size_t + end_addr) +{ + _REG32(209 << 2, ahbregaddr) = 0x0; + size_t end_addr_16kblocks = ((end_addr >> 14) & 0x7FFFFF) - 1; + + _REG32(210 << 2, ahbregaddr) = ((u32)end_addr_16kblocks); + _REG32(212 << 2, ahbregaddr) = 0x0; + _REG32(214 << 2, ahbregaddr) = 0x0; + _REG32(216 << 2, ahbregaddr) = 0x0; + _REG32(224 << 2, ahbregaddr) |= (0x3 << AXI0_RANGE_PROT_BITS_0_OFFSET); + _REG32(225 << 2, ahbregaddr) = 0xFFFFFFFF; + _REG32(208 << 2, ahbregaddr) |= (1 << AXI0_ADDRESS_RANGE_ENABLE); + _REG32(208 << 2, ahbregaddr) |= (1 << PORT_ADDR_PROTECTION_EN_OFFSET); +} + +static inline void ux00ddr_disableaxireadinterleave(size_t ahbregaddr) +{ + _REG32(120 << 2, ahbregaddr) |= (1 << DISABLE_RD_INTERLEAVE_OFFSET); +} + +static inline void ux00ddr_disableoptimalrmodw(size_t ahbregaddr) +{ + _REG32(21 << 2, ahbregaddr) &= (~(1 << OPTIMAL_RMODW_EN_OFFSET)); +} + +static inline void ux00ddr_enablewriteleveling(size_t ahbregaddr) +{ + _REG32(170 << 2, ahbregaddr) |= ((1 << WRLVL_EN_OFFSET) | (1 << + DFI_PHY_WRLELV_MODE_OFFSET)); +} + +static inline void ux00ddr_enablereadleveling(size_t ahbregaddr) +{ + _REG32(181 << 2, ahbregaddr) |= (1 << DFI_PHY_RDLVL_MODE_OFFSET); + _REG32(260 << 2, ahbregaddr) |= (1 << RDLVL_EN_OFFSET); +} + +static inline void ux00ddr_enablereadlevelinggate(size_t ahbregaddr) +{ + _REG32(260 << 2, ahbregaddr) |= (1 << RDLVL_GATE_EN_OFFSET); + _REG32(182 << 2, ahbregaddr) |= (1 << DFI_PHY_RDLVL_GATE_MODE_OFFSET); +} + +static inline void ux00ddr_enablevreftraining(size_t ahbregaddr) +{ + _REG32(184 << 2, ahbregaddr) |= (1 << VREF_EN_OFFSET); +} + +static inline u32 ux00ddr_getdramclass(size_t ahbregaddr) +{ + return((_REG32(0, ahbregaddr) >> DRAM_CLASS_OFFSET) & 0xF); +} + +static inline u64 ux00ddr_phy_fixup(size_t ahbregaddr) +{ + // return bitmask of failed lanes + + size_t ddrphyreg = ahbregaddr + 0x2000; + + u64 fails = 0; + u32 slicebase = 0; + u32 dq = 0; + + // check errata condition + for (u32 slice = 0; slice < 8; slice++) { + u32 regbase = slicebase + 34; + + for (u32 reg = 0; reg < 4; reg++) { + u32 updownreg = _REG32((regbase + reg) << 2, + ddrphyreg); + + for (u32 bit = 0; bit < 2; bit++) { + u32 phy_rx_cal_dqn_0_offset; + + if (bit == 0) { + phy_rx_cal_dqn_0_offset = + PHY_RX_CAL_DQ0_0_OFFSET; + } else { + phy_rx_cal_dqn_0_offset = + PHY_RX_CAL_DQ1_0_OFFSET; + } + + u32 down = (updownreg >> + phy_rx_cal_dqn_0_offset) & 0x3F; + u32 up = (updownreg >> + (phy_rx_cal_dqn_0_offset + 6)) & 0x3F; + + u8 failc0 = ((down == 0) && (up == 0x3F)); + u8 failc1 = ((up == 0) && (down == 0x3F)); + + // print error message on failure + if (failc0 || failc1) { + if (fails == 0) + printf("DDR error in fixing up\n"); + + fails |= (1 << dq); + + char slicelsc = '0'; + char slicemsc = '0'; + + slicelsc += (dq % 10); + slicemsc += (dq / 10); + printf("S "); + printf("%c", slicemsc); + printf("%c", slicelsc); + + if (failc0) + printf("U"); + else + printf("D"); + + printf("\n"); + } + dq++; + } + } + slicebase += 128; + } + return(0); +} + +#endif /* __ASSEMBLER__ */ + +#endif /* FU540_UX00DDR_H */ diff --git a/board/sifive/fu540/ux00prci.h b/board/sifive/fu540/ux00prci.h new file mode 100644 index 0000000000..0393fc2804 --- /dev/null +++ b/board/sifive/fu540/ux00prci.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (c) 2019 SiFive, Inc + * + * Authors: + * Pragnesh Patel <pragnesh.patel at sifive.com> + * Troy Benjegerdes <troy.benjegerdes at sifive.com> + */ + +#ifndef _SIFIVE_UX00PRCI_H +#define _SIFIVE_UX00PRCI_H + +/* Register offsets */ +#define UX00PRCI_HFROSCCFG (0x0000) +#define UX00PRCI_COREPLLCFG (0x0004) +#define UX00PRCI_COREPLLOUT (0x0008) +#define UX00PRCI_DDRPLLCFG (0x000C) +#define UX00PRCI_DDRPLLOUT (0x0010) +#define UX00PRCI_GEMGXLPLLCFG (0x001C) +#define UX00PRCI_GEMGXLPLLOUT (0x0020) +#define UX00PRCI_CORECLKSELREG (0x0024) +#define UX00PRCI_DEVICESRESETREG (0x0028) +#define UX00PRCI_CLKMUXSTATUSREG (0x002C) +#define UX00PRCI_PROCMONCFG (0x00F0) + +/* Fields */ +#define XOSC_EN(x) (((x) & 0x1) << 30) +#define XOSC_RDY(x) (((x) & 0x1) << 31) + +#define PLL_R(x) (((x) & 0x3F) << 0) +#define PLL_F(x) (((x) & 0x1FF) << 6) +#define PLL_Q(x) (((x) & 0x7) << 15) +#define PLL_RANGE(x) (((x) & 0x7) << 18) +#define PLL_BYPASS(x) (((x) & 0x1) << 24) +#define PLL_FSE(x) (((x) & 0x1) << 25) +#define PLL_LOCK(x) (((x) & 0x1) << 31) + +#define PLLOUT_DIV(x) (((x) & 0x7F) << 0) +#define PLLOUT_DIV_BY_1(x) (((x) & 0x1) << 8) +#define PLLOUT_CLK_EN(x) (((x) & 0x1) << 31) + +#define PLL_R_default 0x1 +#define PLL_F_default 0x1F +#define PLL_Q_default 0x3 +#define PLL_RANGE_default 0x0 +#define PLL_BYPASS_default 0x1 +#define PLL_FSE_default 0x1 + +#define PLLOUT_DIV_default 0x0 +#define PLLOUT_DIV_BY_1_default 0x0 +#define PLLOUT_CLK_EN_default 0x0 + +#define PLL_CORECLKSEL_HFXIN 0x1 +#define PLL_CORECLKSEL_COREPLL 0x0 + +#define DEVICESRESET_DDR_CTRL_RST_N(x) (((x) & 0x1) << 0) +#define DEVICESRESET_DDR_AXI_RST_N(x) (((x) & 0x1) << 1) +#define DEVICESRESET_DDR_AHB_RST_N(x) (((x) & 0x1) << 2) +#define DEVICESRESET_DDR_PHY_RST_N(x) (((x) & 0x1) << 3) +#define DEVICESRESET_GEMGXL_RST_N(x) (((x) & 0x1) << 5) + +#define CLKMUX_STATUS_CORECLKPLLSEL (0x1 << 0) +#define CLKMUX_STATUS_TLCLKSEL (0x1 << 1) +#define CLKMUX_STATUS_RTCXSEL (0x1 << 2) +#define CLKMUX_STATUS_DDRCTRLCLKSEL (0x1 << 3) +#define CLKMUX_STATUS_DDRPHYCLKSEL (0x1 << 4) +#define CLKMUX_STATUS_GEMGXLCLKSEL (0x1 << 6) + +#endif // _SIFIVE_UX00PRCI_H
Add header files needed for U-boot SPL Signed-off-by: Pragnesh Patel <pragnesh.patel at sifive.com> --- board/sifive/fu540/ccache.h | 43 + board/sifive/fu540/fu540-memory-map.h | 59 ++ board/sifive/fu540/regconfig-ctl.h | 274 ++++++ board/sifive/fu540/regconfig-phy.h | 1224 +++++++++++++++++++++++++ board/sifive/fu540/ux00ddr.h | 276 ++++++ board/sifive/fu540/ux00prci.h | 69 ++ 6 files changed, 1945 insertions(+) create mode 100644 board/sifive/fu540/ccache.h create mode 100644 board/sifive/fu540/fu540-memory-map.h create mode 100644 board/sifive/fu540/regconfig-ctl.h create mode 100644 board/sifive/fu540/regconfig-phy.h create mode 100644 board/sifive/fu540/ux00ddr.h create mode 100644 board/sifive/fu540/ux00prci.h