| Message ID | 029d0b2f1982c2c7e1d6a0b9ad17f6e273978f0a.1579072090.git.baruch@tkos.co.il |
|---|---|
| State | Accepted |
| Commit | e6a5a5c72b63fd6d2c7ed48b3e49d8da726c69c2 |
| Headers | show |
| Series | [v3,1/3] spl: mmc: support uboot image offset on main partition | expand |
On 15.01.20 08:08, Baruch Siach wrote: > SPL now automatically selects the correct U-Boot image offset for both > eMMC and SD card. No need to tweak > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. > > Signed-off-by: Baruch Siach <baruch at tkos.co.il> Reviewed-by: Stefan Roese <sr at denx.de> Thanks, Stefan
On 15.01.20 08:08, Baruch Siach wrote: > SPL now automatically selects the correct U-Boot image offset for both > eMMC and SD card. No need to tweak > CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. > > Signed-off-by: Baruch Siach <baruch at tkos.co.il> Applied to u-boot-marvell/master Thanks, Stefan
diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README index 6171ce66f4f8..9375be84957a 100644 --- a/board/solidrun/clearfog/README +++ b/board/solidrun/clearfog/README @@ -20,12 +20,6 @@ of "/dev/sdX" here! Install U-Boot on eMMC: ----------------------- -The ROM loads the bootloader from eMMC first boot partition at offset 0. This -is unlike load from SD card that is at offset 512. As a result, the offset of -the main U-Boot image on the eMMC boot partition changes. Set -CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x140 for SPL to load U-Boot from -the correct location. - To make SPL load the main U-Boot image from the eMMC boot partition enable eMMC boot acknowledgement and boot partition with the following U-Boot command:
SPL now automatically selects the correct U-Boot image offset for both eMMC and SD card. No need to tweak CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR anymore. Signed-off-by: Baruch Siach <baruch at tkos.co.il> --- board/solidrun/clearfog/README | 6 ------ 1 file changed, 6 deletions(-)