diff mbox series

[v2,21/21] imx: imxrt1050-evk: Add support for the NXP i.MXRT1050-EVK

Message ID 20200110145148.82233-6-giulio.benetti@benettiengineering.com
State Accepted
Commit 8d9c0762a8cf0a5027e7cd3c6794693f2d64d007
Headers show
Series Add i.MXRT family support | expand

Commit Message

Giulio Benetti Jan. 10, 2020, 2:51 p.m. UTC 
This commit adds board support for i.MXRT1050-EVK from NXP. This board
is an evaluation kit provided by NXP for i.MXRT105x processor family.

More information about this board can be found here:
https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK

The initial supported/tested devices include:
- Debug serial
- SD

Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
---
V1->V2:
* introduced CONFIG_IMXRT1050
* added imxrt1050-evk-u-boot.dtsi for imxrt1050-evk.dts
---
 arch/arm/dts/Makefile                         |   2 +
 arch/arm/dts/imxrt1050-evk-u-boot.dtsi        |  44 ++++
 arch/arm/dts/imxrt1050-evk.dts                | 200 ++++++++++++++++++
 arch/arm/mach-imx/imxrt/Kconfig               |  12 ++
 board/freescale/imxrt1050-evk/Kconfig         |  22 ++
 board/freescale/imxrt1050-evk/MAINTAINERS     |   6 +
 board/freescale/imxrt1050-evk/Makefile        |   6 +
 board/freescale/imxrt1050-evk/README          |  31 +++
 board/freescale/imxrt1050-evk/imximage.cfg    |  36 ++++
 board/freescale/imxrt1050-evk/imxrt1050-evk.c |  81 +++++++
 configs/imxrt1050-evk_defconfig               |  69 ++++++
 include/configs/imxrt1050-evk.h               |  46 ++++
 12 files changed, 555 insertions(+)
 create mode 100644 arch/arm/dts/imxrt1050-evk-u-boot.dtsi
 create mode 100644 arch/arm/dts/imxrt1050-evk.dts
 create mode 100644 board/freescale/imxrt1050-evk/Kconfig
 create mode 100644 board/freescale/imxrt1050-evk/MAINTAINERS
 create mode 100644 board/freescale/imxrt1050-evk/Makefile
 create mode 100644 board/freescale/imxrt1050-evk/README
 create mode 100644 board/freescale/imxrt1050-evk/imximage.cfg
 create mode 100644 board/freescale/imxrt1050-evk/imxrt1050-evk.c
 create mode 100644 configs/imxrt1050-evk_defconfig
 create mode 100644 include/configs/imxrt1050-evk.h

Comments

Stefano Babic Jan. 15, 2020, 12:48 p.m. UTC | #1 
> This commit adds board support for i.MXRT1050-EVK from NXP. This board
> is an evaluation kit provided by NXP for i.MXRT105x processor family.
> More information about this board can be found here:
> https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK
> The initial supported/tested devices include:
> - Debug serial
> - SD
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic
Lukasz Majewski Jan. 28, 2020, 9:02 a.m. UTC | #2 
Hi Giulio,

> This commit adds board support for i.MXRT1050-EVK from NXP. This board
> is an evaluation kit provided by NXP for i.MXRT105x processor family.
> 
> More information about this board can be found here:
> https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK
> 
> The initial supported/tested devices include:
> - Debug serial
> - SD
> 
> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
> ---
> V1->V2:
> * introduced CONFIG_IMXRT1050
> * added imxrt1050-evk-u-boot.dtsi for imxrt1050-evk.dts
> ---
>  arch/arm/dts/Makefile                         |   2 +
>  arch/arm/dts/imxrt1050-evk-u-boot.dtsi        |  44 ++++
>  arch/arm/dts/imxrt1050-evk.dts                | 200
> ++++++++++++++++++ arch/arm/mach-imx/imxrt/Kconfig               |
> 12 ++ board/freescale/imxrt1050-evk/Kconfig         |  22 ++
>  board/freescale/imxrt1050-evk/MAINTAINERS     |   6 +
>  board/freescale/imxrt1050-evk/Makefile        |   6 +
>  board/freescale/imxrt1050-evk/README          |  31 +++
>  board/freescale/imxrt1050-evk/imximage.cfg    |  36 ++++
>  board/freescale/imxrt1050-evk/imxrt1050-evk.c |  81 +++++++
>  configs/imxrt1050-evk_defconfig               |  69 ++++++
>  include/configs/imxrt1050-evk.h               |  46 ++++
>  12 files changed, 555 insertions(+)
>  create mode 100644 arch/arm/dts/imxrt1050-evk-u-boot.dtsi
>  create mode 100644 arch/arm/dts/imxrt1050-evk.dts
>  create mode 100644 board/freescale/imxrt1050-evk/Kconfig
>  create mode 100644 board/freescale/imxrt1050-evk/MAINTAINERS
>  create mode 100644 board/freescale/imxrt1050-evk/Makefile
>  create mode 100644 board/freescale/imxrt1050-evk/README
>  create mode 100644 board/freescale/imxrt1050-evk/imximage.cfg
>  create mode 100644 board/freescale/imxrt1050-evk/imxrt1050-evk.c
>  create mode 100644 configs/imxrt1050-evk_defconfig
>  create mode 100644 include/configs/imxrt1050-evk.h
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 983e235f44..0864460751 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -707,6 +707,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
>  	imx8mq-evk.dtb \
>  	imx8mp-evk.dtb
>  
> +dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb
> +
>  dtb-$(CONFIG_RCAR_GEN2) += \
>  	r8a7790-lager-u-boot.dtb \
>  	r8a7790-stout-u-boot.dtb \
> diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi new file mode 100644
> index 0000000000..fb4f7f6f9d
> --- /dev/null
> +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi

Ach... Ok, so you have already used the U-Boot specific dtsi.

> @@ -0,0 +1,44 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +/ {
> +	chosen {
> +		u-boot,dm-spl;
> +	};
> +};
> +
> +&lpuart1 { /* console */
> +	u-boot,dm-spl;
> +};
> +
> +&semc {
> +	bank1: bank at 0 {
> +		u-boot,dm-spl;
> +	};
> +};
> +
> +&iomuxc {
> +	u-boot,dm-spl;
> +
> +	imxrt1050-evk {
> +		u-boot,dm-spl;
> +		pinctrl_lpuart1: lpuart1grp {
> +			u-boot,dm-spl;
> +		};
> +
> +		pinctrl_semc: semcgrp {
> +			u-boot,dm-spl;
> +		};
> +
> +		pinctrl_usdhc0: usdhc0grp {
> +			u-boot,dm-spl;
> +		};
> +	};
> +};
> +
> +&usdhc1 {
> +	u-boot,dm-spl;
> +};
> diff --git a/arch/arm/dts/imxrt1050-evk.dts
> b/arch/arm/dts/imxrt1050-evk.dts new file mode 100644
> index 0000000000..56b75986e2
> --- /dev/null
> +++ b/arch/arm/dts/imxrt1050-evk.dts
> @@ -0,0 +1,200 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/*
> + * Copyright (C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +/dts-v1/;
> +#include "imxrt1050.dtsi"
> +#include "imxrt1050-evk-u-boot.dtsi"
> +#include <dt-bindings/pinctrl/pins-imxrt1050.h>
> +
> +/ {
> +	model = "NXP IMXRT1050-evk board";
> +	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
> +
> +	chosen {
> +		bootargs = "root=/dev/ram";
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		reg = <0x80000000 0x2000000>;
> +	};
> +};
> +
> +&lpuart1 { /* console */
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lpuart1>;
> +	status = "okay";
> +};
> +
> +&semc {
> +	/*
> +	 * Memory configuration from sdram datasheet IS42S16160J-6BLI
> +	 */
> +	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
> +				MUX_CSX0_SDRAM_CS1
> +				0
> +				0
> +				0
> +				0>;
> +	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
> +					BL_8
> +					COL_9BITS
> +					CL_3>;
> +	fsl,sdram-timing = /bits/ 8 <0x2
> +				     0x2
> +				     0x9
> +				     0x1
> +				     0x5
> +				     0x6
> +
> +				     0x20
> +				     0x09
> +				     0x01
> +				     0x00
> +
> +				     0x04
> +				     0x0A
> +				     0x21
> +				     0x50>;
> +
> +	bank1: bank at 0 {
> +		fsl,base-address = <0x80000000>;
> +		fsl,memory-size = <MEM_SIZE_32M>;
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_lpuart1>;
> +
> +	imxrt1050-evk {
> +		pinctrl_lpuart1: lpuart1grp {
> +			fsl,pins = <
> +
> MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
> +					0xf1
> +
> MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
> +					0xf1
> +			>;
> +		};
> +
> +		pinctrl_semc: semcgrp {
> +			fsl,pins = <
> +				MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
> +					0xf1	/* SEMC_D0 */
> +				MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
> +					0xf1	/* SEMC_D1 */
> +				MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
> +					0xf1	/* SEMC_D2 */
> +				MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
> +					0xf1	/* SEMC_D3 */
> +				MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
> +					0xf1	/* SEMC_D4 */
> +				MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
> +					0xf1	/* SEMC_D5 */
> +				MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
> +					0xf1	/* SEMC_D6 */
> +				MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
> +					0xf1	/* SEMC_D7 */
> +				MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
> +					0xf1	/* SEMC_DM0 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
> +					0xf1	/* SEMC_A0 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
> +					0xf1	/* SEMC_A1 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
> +					0xf1	/* SEMC_A2 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
> +					0xf1	/* SEMC_A3 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
> +					0xf1	/* SEMC_A4 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
> +					0xf1	/* SEMC_A5 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
> +					0xf1	/* SEMC_A6 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
> +					0xf1	/* SEMC_A7 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
> +					0xf1	/* SEMC_A8 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
> +					0xf1	/* SEMC_A9 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
> +					0xf1	/* SEMC_A11 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
> +					0xf1	/* SEMC_A12 */
> +				MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
> +					0xf1	/* SEMC_BA0 */
> +				MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
> +					0xf1	/* SEMC_BA1 */
> +
> MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
> +					0xf1	/* SEMC_A10 */
> +				MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
> +					0xf1	/* SEMC_CAS */
> +				MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
> +					0xf1	/* SEMC_RAS */
> +				MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
> +					0xf1	/* SEMC_CLK */
> +				MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
> +					0xf1	/* SEMC_CKE */
> +				MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
> +					0xf1	/* SEMC_WE */
> +				MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
> +					0xf1	/* SEMC_CS0 */
> +				MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
> +					0xf1	/* SEMC_D8 */
> +				MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
> +					0xf1	/* SEMC_D9 */
> +				MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
> +					0xf1	/* SEMC_D10 */
> +				MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
> +					0xf1	/* SEMC_D11 */
> +				MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
> +					0xf1	/* SEMC_D12 */
> +				MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
> +					0xf1	/* SEMC_D13 */
> +				MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
> +					0xf1	/* SEMC_D14 */
> +				MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
> +					0xf1	/* SEMC_D15 */
> +				MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
> +					0xf1	/* SEMC_DM1 */
> +				MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
> +					(IMX_PAD_SION | 0xf1)
> /* SEMC_DQS */
> +			>;
> +		};
> +
> +		pinctrl_usdhc0: usdhc0grp {
> +			fsl,pins = <
> +
> MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
> +					0x1B000
> +
> MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
> +					0xB069
> +
> MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
> +					0x17061
> +
> MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
> +					0x17061
> +
> MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
> +					0x17061
> +
> MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
> +					0x17061
> +
> MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
> +					0x17061
> +
> MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
> +					0x17061
> +			>;
> +		};
> +	};
> +};
> +
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz",
> "sleep";
> +	pinctrl-0 = <&pinctrl_usdhc0>;
> +	pinctrl-1 = <&pinctrl_usdhc0>;
> +	pinctrl-2 = <&pinctrl_usdhc0>;
> +	pinctrl-3 = <&pinctrl_usdhc0>;
> +	status = "okay";
> +
> +	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
> +};
> diff --git a/arch/arm/mach-imx/imxrt/Kconfig
> b/arch/arm/mach-imx/imxrt/Kconfig index 96ad2e988b..e3aff11d48 100644
> --- a/arch/arm/mach-imx/imxrt/Kconfig
> +++ b/arch/arm/mach-imx/imxrt/Kconfig
> @@ -10,4 +10,16 @@ config IMXRT1050
>  config SYS_SOC
>  	default "imxrt"
>  
> +choice
> +	prompt "NXP i.MXRT board select"
> +	optional
> +
> +config TARGET_IMXRT1050_EVK
> +	bool "Support imxrt1050 EVK board"
> +	select IMXRT1050
> +
> +endchoice
> +
> +source "board/freescale/imxrt1050-evk/Kconfig"
> +
>  endif
> diff --git a/board/freescale/imxrt1050-evk/Kconfig
> b/board/freescale/imxrt1050-evk/Kconfig new file mode 100644
> index 0000000000..79e6e4524a
> --- /dev/null
> +++ b/board/freescale/imxrt1050-evk/Kconfig
> @@ -0,0 +1,22 @@
> +if TARGET_IMXRT1050_EVK
> +
> +config SYS_BOARD
> +	string
> +	default "imxrt1050-evk"
> +
> +config SYS_VENDOR
> +	string
> +	default "freescale"
> +
> +config SYS_SOC
> +	string
> +	default "imxrt1050"
> +
> +config SYS_CONFIG_NAME
> +	string
> +	default "imxrt1050-evk"
> +
> +config IMX_CONFIG
> +	default "board/freescale/imxrt1050-evk/imximage.cfg"
> +
> +endif
> diff --git a/board/freescale/imxrt1050-evk/MAINTAINERS
> b/board/freescale/imxrt1050-evk/MAINTAINERS new file mode 100644
> index 0000000000..a872855452
> --- /dev/null
> +++ b/board/freescale/imxrt1050-evk/MAINTAINERS
> @@ -0,0 +1,6 @@
> +IMXRT1050 EVALUATION KIT
> +M:	Giulio Benetti <giulio.benetti at benettiengineering.com>
> +S:	Maintained
> +F:	board/freescale/imxrt1050-evk
> +F:	include/configs/imxrt1050-evk.h
> +F:	configs/imxrt1050-evk_defconfig
> diff --git a/board/freescale/imxrt1050-evk/Makefile
> b/board/freescale/imxrt1050-evk/Makefile new file mode 100644
> index 0000000000..0e984d1d7a
> --- /dev/null
> +++ b/board/freescale/imxrt1050-evk/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2019
> +# Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> +
> +obj-y	:= imxrt1050-evk.o
> diff --git a/board/freescale/imxrt1050-evk/README
> b/board/freescale/imxrt1050-evk/README new file mode 100644
> index 0000000000..f7e2894025
> --- /dev/null
> +++ b/board/freescale/imxrt1050-evk/README
> @@ -0,0 +1,31 @@
> +How to use U-Boot on NXP i.MXRT1050 EVK
> +-----------------------------------------------
> +
> +- Build U-Boot for i.MXRT1050 EVK:
> +
> +$ make mrproper
> +$ make imxrt1050-evk_defconfig
> +$ make
> +
> +This will generate the SPL image called SPL and the u-boot.img.
> +
> +- Flash the SPL image into the micro SD card:
> +
> +sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
> +
> +- Flash the u-boot.img image into the micro SD card:
> +
> +sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync
> +
> +- Jumper settings:
> +
> +SW7: 1 0 1 0
> +
> +where 0 means bottom position and 1 means top position (from the
> +switch label numbers reference).
> +
> +- Connect the USB cable between the EVK and the PC for the console.
> +(The USB console connector is the one close the ethernet connector)
> +
> +- Insert the micro SD card in the board, power it up and U-Boot
> messages should +come up.


Thanks for detailed readme, appreciated :-)

> diff --git a/board/freescale/imxrt1050-evk/imximage.cfg
> b/board/freescale/imxrt1050-evk/imximage.cfg new file mode 100644
> index 0000000000..cf1665be61
> --- /dev/null
> +++ b/board/freescale/imxrt1050-evk/imximage.cfg
> @@ -0,0 +1,36 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +#define __ASSEMBLY__
> +#include <config.h>
> +
> +/* image version */
> +
> +IMAGE_VERSION 2
> +
> +/*
> + * Boot Device : one of
> + * spi/sd/nand/onenand, qspi/nor
> + */
> +
> +BOOT_FROM	sd
> +
> +/*
> + * Device Configuration Data (DCD)
> + *
> + * Each entry must have the format:
> + * Addr-type           Address        Value
> + *
> + * where:
> + *	Addr-type register length (1,2 or 4 bytes)
> + *	Address	  absolute address of the register
> + *	value	  value to be stored in the register
> + */
> +
> +/* Set all FlexRAM as OCRAM(01b) */
> +DATA 4 0x400AC044 0x55555555
> +/* Use FLEXRAM_BANK_CFG to config FlexRAM */
> +SET_BIT 4 0x400AC040 0x4
> diff --git a/board/freescale/imxrt1050-evk/imxrt1050-evk.c
> b/board/freescale/imxrt1050-evk/imxrt1050-evk.c new file mode 100644
> index 0000000000..bda03b5ea5
> --- /dev/null
> +++ b/board/freescale/imxrt1050-evk/imxrt1050-evk.c
> @@ -0,0 +1,81 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2019

If you would prepare next version of this patch - please update the
date.

> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <ram.h>
> +#include <spl.h>
> +#include <asm/io.h>
> +#include <asm/armv7m.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +int dram_init(void)
> +{
> +#ifndef CONFIG_SUPPORT_SPL
> +	int rv;
> +	struct udevice *dev;
> +
> +	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
> +	if (rv) {
> +		debug("DRAM init failed: %d\n", rv);
> +		return rv;
> +	}
> +
> +#endif
> +	return fdtdec_setup_mem_size_base();
> +}
> +
> +int dram_init_banksize(void)
> +{
> +	return fdtdec_setup_memory_banksize();
> +}
> +
> +#ifdef CONFIG_SPL_BUILD
> +#ifdef CONFIG_SPL_OS_BOOT
> +int spl_start_uboot(void)
> +{
> +	debug("SPL: booting kernel\n");
> +	/* break into full u-boot on 'c' */
> +	return serial_tstc() && serial_getc() == 'c';
> +}
> +#endif
> +
> +int spl_dram_init(void)
> +{
> +	struct udevice *dev;
> +	int rv;
> +
> +	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
> +	if (rv)
> +		debug("DRAM init failed: %d\n", rv);
> +	return rv;
> +}
> +
> +void spl_board_init(void)
> +{
> +	spl_dram_init();
> +	preloader_console_init();
> +	arch_cpu_init(); /* to configure mpu for sdram rw
> permissions */ +}
> +
> +u32 spl_boot_device(void)
> +{
> +	return BOOT_DEVICE_MMC1;
> +}
> +#endif
> +
> +u32 get_board_rev(void)
> +{
> +	return 0;
> +}
> +
> +int board_init(void)
> +{
> +	gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
> +
> +	return 0;
> +}
> diff --git a/configs/imxrt1050-evk_defconfig
> b/configs/imxrt1050-evk_defconfig new file mode 100644
> index 0000000000..102e663886
> --- /dev/null
> +++ b/configs/imxrt1050-evk_defconfig
> @@ -0,0 +1,69 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_ICACHE_OFF=y
> +CONFIG_SYS_DCACHE_OFF=y

Isn't there any cache available on this SoC? Or is it handled
differently and requires special CONFIG_ option?

Enabling caches brings significant speed improvement also in U-Boot.

> +CONFIG_ARCH_IMXRT=y
> +CONFIG_SYS_TEXT_BASE=0x80002000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_SYS_MALLOC_F_LEN=0x8000
> +CONFIG_ENV_OFFSET=0x80000
> +CONFIG_DM_GPIO=y
> +CONFIG_TARGET_IMXRT1050_EVK=y
> +CONFIG_SPL_MMC_SUPPORT=y
> +CONFIG_SPL_SERIAL_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL_SIZE_LIMIT=131072
> +CONFIG_SPL=y
> +CONFIG_SPL_TEXT_BASE=0x20209000
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_SD_BOOT=y
> +# CONFIG_USE_BOOTCOMMAND is not set
> +# CONFIG_DISPLAY_CPUINFO is not set
> +CONFIG_SPL_BOARD_INIT=y
> +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
> +# CONFIG_SPL_CRC32_SUPPORT is not set
> +# CONFIG_SPL_DM_GPIO is not set
> +# CONFIG_BOOTM_NETBSD is not set
> +# CONFIG_BOOTM_PLAN9 is not set
> +# CONFIG_BOOTM_RTEMS is not set
> +# CONFIG_BOOTM_VXWORKS is not set
> +# CONFIG_CMD_MII is not set
> +# CONFIG_DOS_PARTITION is not set
> +# CONFIG_ISO_PARTITION is not set
> +# CONFIG_EFI_PARTITION is not set
> +CONFIG_OF_CONTROL=y
> +CONFIG_SPL_OF_CONTROL=y
> +CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk"
> +CONFIG_ENV_IS_NOWHERE=y
> +CONFIG_ENV_IS_IN_MMC=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> +CONFIG_TFTP_BLOCKSIZE=512
> +CONFIG_SPL_DM=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +# CONFIG_OF_TRANSLATE is not set
> +CONFIG_SPL_CLK_COMPOSITE_CCF=y
> +CONFIG_CLK_COMPOSITE_CCF=y
> +CONFIG_SPL_CLK_IMXRT1050=y
> +CONFIG_CLK_IMXRT1050=y
> +CONFIG_MXC_GPIO=y
> +# CONFIG_INPUT is not set
> +CONFIG_DM_MMC=y
> +CONFIG_FSL_USDHC=y
> +CONFIG_DM_ETH=y
> +CONFIG_PINCTRL=y
> +CONFIG_SPL_PINCTRL=y
> +CONFIG_PINCTRL_IMXRT=y
> +CONFIG_RAM=y
> +CONFIG_SPL_RAM=y
> +CONFIG_IMXRT_SDRAM=y
> +CONFIG_FSL_LPUART=y
> +CONFIG_TIMER=y
> +CONFIG_SPL_TIMER=y
> +CONFIG_SHA1=y
> +CONFIG_SHA256=y
> +CONFIG_HEXDUMP=y
> diff --git a/include/configs/imxrt1050-evk.h
> b/include/configs/imxrt1050-evk.h new file mode 100644
> index 0000000000..cdec657fb0
> --- /dev/null
> +++ b/include/configs/imxrt1050-evk.h
> @@ -0,0 +1,46 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2019
> + * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
> + */
> +
> +#ifndef __IMXRT1050_EVK_H
> +#define __IMXRT1050_EVK_H
> +
> +#include <asm/arch/imx-regs.h>
> +
> +#define CONFIG_SYS_INIT_SP_ADDR		0x20280000
> +
> +#ifdef CONFIG_SUPPORT_SPL
> +#define CONFIG_SYS_LOAD_ADDR		0x20209000
> +#else
> +#define CONFIG_SYS_LOAD_ADDR		0x80000000
> +#define CONFIG_LOADADDR			0x80000000
> +#endif
> +
> +#define CONFIG_SYS_FSL_ERRATUM_ESDHC135		1
> +#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE	1
> +
> +#define PHYS_SDRAM			0x80000000
> +#define PHYS_SDRAM_SIZE			(32 * 1024 * 1024)
> +
> +#define DMAMEM_SZ_ALL			(1 * 1024 * 1024)
> +#define DMAMEM_BASE			(PHYS_SDRAM +
> PHYS_SDRAM_SIZE - \
> +					 DMAMEM_SZ_ALL)
> +
> +#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
> +
> +/*
> + * Configuration of the external SDRAM memory
> + */
> +#define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
> +
> +/* For SPL */
> +#ifdef CONFIG_SUPPORT_SPL
> +#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
> +#define CONFIG_SYS_SPL_LEN		0x00008000
> +#define CONFIG_SYS_UBOOT_START		0x800023FD
> +#endif
> +/* For SPL ends */
> +
> +#endif /* __IMXRT1050_EVK_H */




Best regards,

Lukasz Majewski

--

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lukma at denx.de
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 488 bytes
Desc: OpenPGP digital signature
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200128/9725c817/attachment.sig>
Giulio Benetti Jan. 28, 2020, 6:54 p.m. UTC | #3 
On 1/28/20 10:02 AM, Lukasz Majewski wrote:
> Hi Giulio,
> 
>> This commit adds board support for i.MXRT1050-EVK from NXP. This board
>> is an evaluation kit provided by NXP for i.MXRT105x processor family.
>>
>> More information about this board can be found here:
>> https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-rt1050-evaluation-kit:MIMXRT1050-EVK
>>
>> The initial supported/tested devices include:
>> - Debug serial
>> - SD
>>
>> Signed-off-by: Giulio Benetti <giulio.benetti at benettiengineering.com>
>> ---
>> V1->V2:
>> * introduced CONFIG_IMXRT1050
>> * added imxrt1050-evk-u-boot.dtsi for imxrt1050-evk.dts
>> ---
>>   arch/arm/dts/Makefile                         |   2 +
>>   arch/arm/dts/imxrt1050-evk-u-boot.dtsi        |  44 ++++
>>   arch/arm/dts/imxrt1050-evk.dts                | 200
>> ++++++++++++++++++ arch/arm/mach-imx/imxrt/Kconfig               |
>> 12 ++ board/freescale/imxrt1050-evk/Kconfig         |  22 ++
>>   board/freescale/imxrt1050-evk/MAINTAINERS     |   6 +
>>   board/freescale/imxrt1050-evk/Makefile        |   6 +
>>   board/freescale/imxrt1050-evk/README          |  31 +++
>>   board/freescale/imxrt1050-evk/imximage.cfg    |  36 ++++
>>   board/freescale/imxrt1050-evk/imxrt1050-evk.c |  81 +++++++
>>   configs/imxrt1050-evk_defconfig               |  69 ++++++
>>   include/configs/imxrt1050-evk.h               |  46 ++++
>>   12 files changed, 555 insertions(+)
>>   create mode 100644 arch/arm/dts/imxrt1050-evk-u-boot.dtsi
>>   create mode 100644 arch/arm/dts/imxrt1050-evk.dts
>>   create mode 100644 board/freescale/imxrt1050-evk/Kconfig
>>   create mode 100644 board/freescale/imxrt1050-evk/MAINTAINERS
>>   create mode 100644 board/freescale/imxrt1050-evk/Makefile
>>   create mode 100644 board/freescale/imxrt1050-evk/README
>>   create mode 100644 board/freescale/imxrt1050-evk/imximage.cfg
>>   create mode 100644 board/freescale/imxrt1050-evk/imxrt1050-evk.c
>>   create mode 100644 configs/imxrt1050-evk_defconfig
>>   create mode 100644 include/configs/imxrt1050-evk.h
>>
>> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
>> index 983e235f44..0864460751 100644
>> --- a/arch/arm/dts/Makefile
>> +++ b/arch/arm/dts/Makefile
>> @@ -707,6 +707,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
>>   	imx8mq-evk.dtb \
>>   	imx8mp-evk.dtb
>>   
>> +dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb
>> +
>>   dtb-$(CONFIG_RCAR_GEN2) += \
>>   	r8a7790-lager-u-boot.dtb \
>>   	r8a7790-stout-u-boot.dtb \
>> diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
>> b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi new file mode 100644
>> index 0000000000..fb4f7f6f9d
>> --- /dev/null
>> +++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
> 
> Ach... Ok, so you have already used the U-Boot specific dtsi.

Yep, did it just before sending :-)

Best regards
diff mbox series

Patch

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 983e235f44..0864460751 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -707,6 +707,8 @@  dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mq-evk.dtb \
 	imx8mp-evk.dtb
 
+dtb-$(CONFIG_ARCH_IMXRT) += imxrt1050-evk.dtb
+
 dtb-$(CONFIG_RCAR_GEN2) += \
 	r8a7790-lager-u-boot.dtb \
 	r8a7790-stout-u-boot.dtb \
diff --git a/arch/arm/dts/imxrt1050-evk-u-boot.dtsi b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
new file mode 100644
index 0000000000..fb4f7f6f9d
--- /dev/null
+++ b/arch/arm/dts/imxrt1050-evk-u-boot.dtsi
@@ -0,0 +1,44 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
+ */
+
+/ {
+	chosen {
+		u-boot,dm-spl;
+	};
+};
+
+&lpuart1 { /* console */
+	u-boot,dm-spl;
+};
+
+&semc {
+	bank1: bank at 0 {
+		u-boot,dm-spl;
+	};
+};
+
+&iomuxc {
+	u-boot,dm-spl;
+
+	imxrt1050-evk {
+		u-boot,dm-spl;
+		pinctrl_lpuart1: lpuart1grp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_semc: semcgrp {
+			u-boot,dm-spl;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			u-boot,dm-spl;
+		};
+	};
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/imxrt1050-evk.dts b/arch/arm/dts/imxrt1050-evk.dts
new file mode 100644
index 0000000000..56b75986e2
--- /dev/null
+++ b/arch/arm/dts/imxrt1050-evk.dts
@@ -0,0 +1,200 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
+ */
+
+/dts-v1/;
+#include "imxrt1050.dtsi"
+#include "imxrt1050-evk-u-boot.dtsi"
+#include <dt-bindings/pinctrl/pins-imxrt1050.h>
+
+/ {
+	model = "NXP IMXRT1050-evk board";
+	compatible = "fsl,imxrt1050-evk", "fsl,imxrt1050";
+
+	chosen {
+		bootargs = "root=/dev/ram";
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		reg = <0x80000000 0x2000000>;
+	};
+};
+
+&lpuart1 { /* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+	status = "okay";
+};
+
+&semc {
+	/*
+	 * Memory configuration from sdram datasheet IS42S16160J-6BLI
+	 */
+	fsl,sdram-mux = /bits/ 8 <MUX_A8_SDRAM_A8
+				MUX_CSX0_SDRAM_CS1
+				0
+				0
+				0
+				0>;
+	fsl,sdram-control = /bits/ 8 <MEM_WIDTH_16BITS
+					BL_8
+					COL_9BITS
+					CL_3>;
+	fsl,sdram-timing = /bits/ 8 <0x2
+				     0x2
+				     0x9
+				     0x1
+				     0x5
+				     0x6
+
+				     0x20
+				     0x09
+				     0x01
+				     0x00
+
+				     0x04
+				     0x0A
+				     0x21
+				     0x50>;
+
+	bank1: bank at 0 {
+		fsl,base-address = <0x80000000>;
+		fsl,memory-size = <MEM_SIZE_32M>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart1>;
+
+	imxrt1050-evk {
+		pinctrl_lpuart1: lpuart1grp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_AD_B0_12_LPUART1_TXD
+					0xf1
+				MXRT1050_IOMUXC_GPIO_AD_B0_13_LPUART1_RXD
+					0xf1
+			>;
+		};
+
+		pinctrl_semc: semcgrp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00
+					0xf1	/* SEMC_D0 */
+				MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01
+					0xf1	/* SEMC_D1 */
+				MXRT1050_IOMUXC_GPIO_EMC_02_SEMC_DA02
+					0xf1	/* SEMC_D2 */
+				MXRT1050_IOMUXC_GPIO_EMC_03_SEMC_DA03
+					0xf1	/* SEMC_D3 */
+				MXRT1050_IOMUXC_GPIO_EMC_04_SEMC_DA04
+					0xf1	/* SEMC_D4 */
+				MXRT1050_IOMUXC_GPIO_EMC_05_SEMC_DA05
+					0xf1	/* SEMC_D5 */
+				MXRT1050_IOMUXC_GPIO_EMC_06_SEMC_DA06
+					0xf1	/* SEMC_D6 */
+				MXRT1050_IOMUXC_GPIO_EMC_07_SEMC_DA07
+					0xf1	/* SEMC_D7 */
+				MXRT1050_IOMUXC_GPIO_EMC_08_SEMC_DM00
+					0xf1	/* SEMC_DM0 */
+				MXRT1050_IOMUXC_GPIO_EMC_09_SEMC_ADDR00
+					0xf1	/* SEMC_A0 */
+				MXRT1050_IOMUXC_GPIO_EMC_10_SEMC_ADDR01
+					0xf1	/* SEMC_A1 */
+				MXRT1050_IOMUXC_GPIO_EMC_11_SEMC_ADDR02
+					0xf1	/* SEMC_A2 */
+				MXRT1050_IOMUXC_GPIO_EMC_12_SEMC_ADDR03
+					0xf1	/* SEMC_A3 */
+				MXRT1050_IOMUXC_GPIO_EMC_13_SEMC_ADDR04
+					0xf1	/* SEMC_A4 */
+				MXRT1050_IOMUXC_GPIO_EMC_14_SEMC_ADDR05
+					0xf1	/* SEMC_A5 */
+				MXRT1050_IOMUXC_GPIO_EMC_15_SEMC_ADDR06
+					0xf1	/* SEMC_A6 */
+				MXRT1050_IOMUXC_GPIO_EMC_16_SEMC_ADDR07
+					0xf1	/* SEMC_A7 */
+				MXRT1050_IOMUXC_GPIO_EMC_17_SEMC_ADDR08
+					0xf1	/* SEMC_A8 */
+				MXRT1050_IOMUXC_GPIO_EMC_18_SEMC_ADDR09
+					0xf1	/* SEMC_A9 */
+				MXRT1050_IOMUXC_GPIO_EMC_19_SEMC_ADDR11
+					0xf1	/* SEMC_A11 */
+				MXRT1050_IOMUXC_GPIO_EMC_20_SEMC_ADDR12
+					0xf1	/* SEMC_A12 */
+				MXRT1050_IOMUXC_GPIO_EMC_21_SEMC_BA0
+					0xf1	/* SEMC_BA0 */
+				MXRT1050_IOMUXC_GPIO_EMC_22_SEMC_BA1
+					0xf1	/* SEMC_BA1 */
+				MXRT1050_IOMUXC_GPIO_EMC_23_SEMC_ADDR10
+					0xf1	/* SEMC_A10 */
+				MXRT1050_IOMUXC_GPIO_EMC_24_SEMC_CAS
+					0xf1	/* SEMC_CAS */
+				MXRT1050_IOMUXC_GPIO_EMC_25_SEMC_RAS
+					0xf1	/* SEMC_RAS */
+				MXRT1050_IOMUXC_GPIO_EMC_26_SEMC_CLK
+					0xf1	/* SEMC_CLK */
+				MXRT1050_IOMUXC_GPIO_EMC_27_SEMC_CKE
+					0xf1	/* SEMC_CKE */
+				MXRT1050_IOMUXC_GPIO_EMC_28_SEMC_WE
+					0xf1	/* SEMC_WE */
+				MXRT1050_IOMUXC_GPIO_EMC_29_SEMC_CS0
+					0xf1	/* SEMC_CS0 */
+				MXRT1050_IOMUXC_GPIO_EMC_30_SEMC_DA08
+					0xf1	/* SEMC_D8 */
+				MXRT1050_IOMUXC_GPIO_EMC_31_SEMC_DA09
+					0xf1	/* SEMC_D9 */
+				MXRT1050_IOMUXC_GPIO_EMC_32_SEMC_DA10
+					0xf1	/* SEMC_D10 */
+				MXRT1050_IOMUXC_GPIO_EMC_33_SEMC_DA11
+					0xf1	/* SEMC_D11 */
+				MXRT1050_IOMUXC_GPIO_EMC_34_SEMC_DA12
+					0xf1	/* SEMC_D12 */
+				MXRT1050_IOMUXC_GPIO_EMC_35_SEMC_DA13
+					0xf1	/* SEMC_D13 */
+				MXRT1050_IOMUXC_GPIO_EMC_36_SEMC_DA14
+					0xf1	/* SEMC_D14 */
+				MXRT1050_IOMUXC_GPIO_EMC_37_SEMC_DA15
+					0xf1	/* SEMC_D15 */
+				MXRT1050_IOMUXC_GPIO_EMC_38_SEMC_DM01
+					0xf1	/* SEMC_DM1 */
+				MXRT1050_IOMUXC_GPIO_EMC_39_SEMC_DQS
+					(IMX_PAD_SION | 0xf1)	/* SEMC_DQS */
+			>;
+		};
+
+		pinctrl_usdhc0: usdhc0grp {
+			fsl,pins = <
+				MXRT1050_IOMUXC_GPIO_B1_12_USDHC1_CD_B
+					0x1B000
+				MXRT1050_IOMUXC_GPIO_B1_14_USDHC1_VSELECT
+					0xB069
+				MXRT1050_IOMUXC_GPIO_SD_B0_00_USDHC1_CMD
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_01_USDHC1_CLK
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_05_USDHC1_DATA3
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_04_USDHC1_DATA2
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_03_USDHC1_DATA1
+					0x17061
+				MXRT1050_IOMUXC_GPIO_SD_B0_02_USDHC1_DATA0
+					0x17061
+			>;
+		};
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	pinctrl-0 = <&pinctrl_usdhc0>;
+	pinctrl-1 = <&pinctrl_usdhc0>;
+	pinctrl-2 = <&pinctrl_usdhc0>;
+	pinctrl-3 = <&pinctrl_usdhc0>;
+	status = "okay";
+
+	cd-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+};
diff --git a/arch/arm/mach-imx/imxrt/Kconfig b/arch/arm/mach-imx/imxrt/Kconfig
index 96ad2e988b..e3aff11d48 100644
--- a/arch/arm/mach-imx/imxrt/Kconfig
+++ b/arch/arm/mach-imx/imxrt/Kconfig
@@ -10,4 +10,16 @@  config IMXRT1050
 config SYS_SOC
 	default "imxrt"
 
+choice
+	prompt "NXP i.MXRT board select"
+	optional
+
+config TARGET_IMXRT1050_EVK
+	bool "Support imxrt1050 EVK board"
+	select IMXRT1050
+
+endchoice
+
+source "board/freescale/imxrt1050-evk/Kconfig"
+
 endif
diff --git a/board/freescale/imxrt1050-evk/Kconfig b/board/freescale/imxrt1050-evk/Kconfig
new file mode 100644
index 0000000000..79e6e4524a
--- /dev/null
+++ b/board/freescale/imxrt1050-evk/Kconfig
@@ -0,0 +1,22 @@ 
+if TARGET_IMXRT1050_EVK
+
+config SYS_BOARD
+	string
+	default "imxrt1050-evk"
+
+config SYS_VENDOR
+	string
+	default "freescale"
+
+config SYS_SOC
+	string
+	default "imxrt1050"
+
+config SYS_CONFIG_NAME
+	string
+	default "imxrt1050-evk"
+
+config IMX_CONFIG
+	default "board/freescale/imxrt1050-evk/imximage.cfg"
+
+endif
diff --git a/board/freescale/imxrt1050-evk/MAINTAINERS b/board/freescale/imxrt1050-evk/MAINTAINERS
new file mode 100644
index 0000000000..a872855452
--- /dev/null
+++ b/board/freescale/imxrt1050-evk/MAINTAINERS
@@ -0,0 +1,6 @@ 
+IMXRT1050 EVALUATION KIT
+M:	Giulio Benetti <giulio.benetti at benettiengineering.com>
+S:	Maintained
+F:	board/freescale/imxrt1050-evk
+F:	include/configs/imxrt1050-evk.h
+F:	configs/imxrt1050-evk_defconfig
diff --git a/board/freescale/imxrt1050-evk/Makefile b/board/freescale/imxrt1050-evk/Makefile
new file mode 100644
index 0000000000..0e984d1d7a
--- /dev/null
+++ b/board/freescale/imxrt1050-evk/Makefile
@@ -0,0 +1,6 @@ 
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2019
+# Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
+
+obj-y	:= imxrt1050-evk.o
diff --git a/board/freescale/imxrt1050-evk/README b/board/freescale/imxrt1050-evk/README
new file mode 100644
index 0000000000..f7e2894025
--- /dev/null
+++ b/board/freescale/imxrt1050-evk/README
@@ -0,0 +1,31 @@ 
+How to use U-Boot on NXP i.MXRT1050 EVK
+-----------------------------------------------
+
+- Build U-Boot for i.MXRT1050 EVK:
+
+$ make mrproper
+$ make imxrt1050-evk_defconfig
+$ make
+
+This will generate the SPL image called SPL and the u-boot.img.
+
+- Flash the SPL image into the micro SD card:
+
+sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
+
+- Flash the u-boot.img image into the micro SD card:
+
+sudo dd if=u-boot.img of=/dev/sdb bs=1k seek=128; sync
+
+- Jumper settings:
+
+SW7: 1 0 1 0
+
+where 0 means bottom position and 1 means top position (from the
+switch label numbers reference).
+
+- Connect the USB cable between the EVK and the PC for the console.
+(The USB console connector is the one close the ethernet connector)
+
+- Insert the micro SD card in the board, power it up and U-Boot messages should
+come up.
diff --git a/board/freescale/imxrt1050-evk/imximage.cfg b/board/freescale/imxrt1050-evk/imximage.cfg
new file mode 100644
index 0000000000..cf1665be61
--- /dev/null
+++ b/board/freescale/imxrt1050-evk/imximage.cfg
@@ -0,0 +1,36 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
+ */
+
+#define __ASSEMBLY__
+#include <config.h>
+
+/* image version */
+
+IMAGE_VERSION 2
+
+/*
+ * Boot Device : one of
+ * spi/sd/nand/onenand, qspi/nor
+ */
+
+BOOT_FROM	sd
+
+/*
+ * Device Configuration Data (DCD)
+ *
+ * Each entry must have the format:
+ * Addr-type           Address        Value
+ *
+ * where:
+ *	Addr-type register length (1,2 or 4 bytes)
+ *	Address	  absolute address of the register
+ *	value	  value to be stored in the register
+ */
+
+/* Set all FlexRAM as OCRAM(01b) */
+DATA 4 0x400AC044 0x55555555
+/* Use FLEXRAM_BANK_CFG to config FlexRAM */
+SET_BIT 4 0x400AC040 0x4
diff --git a/board/freescale/imxrt1050-evk/imxrt1050-evk.c b/board/freescale/imxrt1050-evk/imxrt1050-evk.c
new file mode 100644
index 0000000000..bda03b5ea5
--- /dev/null
+++ b/board/freescale/imxrt1050-evk/imxrt1050-evk.c
@@ -0,0 +1,81 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ram.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/armv7m.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int dram_init(void)
+{
+#ifndef CONFIG_SUPPORT_SPL
+	int rv;
+	struct udevice *dev;
+
+	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (rv) {
+		debug("DRAM init failed: %d\n", rv);
+		return rv;
+	}
+
+#endif
+	return fdtdec_setup_mem_size_base();
+}
+
+int dram_init_banksize(void)
+{
+	return fdtdec_setup_memory_banksize();
+}
+
+#ifdef CONFIG_SPL_BUILD
+#ifdef CONFIG_SPL_OS_BOOT
+int spl_start_uboot(void)
+{
+	debug("SPL: booting kernel\n");
+	/* break into full u-boot on 'c' */
+	return serial_tstc() && serial_getc() == 'c';
+}
+#endif
+
+int spl_dram_init(void)
+{
+	struct udevice *dev;
+	int rv;
+
+	rv = uclass_get_device(UCLASS_RAM, 0, &dev);
+	if (rv)
+		debug("DRAM init failed: %d\n", rv);
+	return rv;
+}
+
+void spl_board_init(void)
+{
+	spl_dram_init();
+	preloader_console_init();
+	arch_cpu_init(); /* to configure mpu for sdram rw permissions */
+}
+
+u32 spl_boot_device(void)
+{
+	return BOOT_DEVICE_MMC1;
+}
+#endif
+
+u32 get_board_rev(void)
+{
+	return 0;
+}
+
+int board_init(void)
+{
+	gd->bd->bi_boot_params = gd->bd->bi_dram[0].start + 0x100;
+
+	return 0;
+}
diff --git a/configs/imxrt1050-evk_defconfig b/configs/imxrt1050-evk_defconfig
new file mode 100644
index 0000000000..102e663886
--- /dev/null
+++ b/configs/imxrt1050-evk_defconfig
@@ -0,0 +1,69 @@ 
+CONFIG_ARM=y
+CONFIG_SYS_ICACHE_OFF=y
+CONFIG_SYS_DCACHE_OFF=y
+CONFIG_ARCH_IMXRT=y
+CONFIG_SYS_TEXT_BASE=0x80002000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_ENV_OFFSET=0x80000
+CONFIG_DM_GPIO=y
+CONFIG_TARGET_IMXRT1050_EVK=y
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SPL_SIZE_LIMIT=131072
+CONFIG_SPL=y
+CONFIG_SPL_TEXT_BASE=0x20209000
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SD_BOOT=y
+# CONFIG_USE_BOOTCOMMAND is not set
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x100
+# CONFIG_SPL_CRC32_SUPPORT is not set
+# CONFIG_SPL_DM_GPIO is not set
+# CONFIG_BOOTM_NETBSD is not set
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_BOOTM_VXWORKS is not set
+# CONFIG_CMD_MII is not set
+# CONFIG_DOS_PARTITION is not set
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imxrt1050-evk"
+CONFIG_ENV_IS_NOWHERE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_TFTP_BLOCKSIZE=512
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+# CONFIG_OF_TRANSLATE is not set
+CONFIG_SPL_CLK_COMPOSITE_CCF=y
+CONFIG_CLK_COMPOSITE_CCF=y
+CONFIG_SPL_CLK_IMXRT1050=y
+CONFIG_CLK_IMXRT1050=y
+CONFIG_MXC_GPIO=y
+# CONFIG_INPUT is not set
+CONFIG_DM_MMC=y
+CONFIG_FSL_USDHC=y
+CONFIG_DM_ETH=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_PINCTRL_IMXRT=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_IMXRT_SDRAM=y
+CONFIG_FSL_LPUART=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_SHA1=y
+CONFIG_SHA256=y
+CONFIG_HEXDUMP=y
diff --git a/include/configs/imxrt1050-evk.h b/include/configs/imxrt1050-evk.h
new file mode 100644
index 0000000000..cdec657fb0
--- /dev/null
+++ b/include/configs/imxrt1050-evk.h
@@ -0,0 +1,46 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2019
+ * Author(s): Giulio Benetti <giulio.benetti at benettiengineering.com>
+ */
+
+#ifndef __IMXRT1050_EVK_H
+#define __IMXRT1050_EVK_H
+
+#include <asm/arch/imx-regs.h>
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x20280000
+
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SYS_LOAD_ADDR		0x20209000
+#else
+#define CONFIG_SYS_LOAD_ADDR		0x80000000
+#define CONFIG_LOADADDR			0x80000000
+#endif
+
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC135		1
+#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE	1
+
+#define PHYS_SDRAM			0x80000000
+#define PHYS_SDRAM_SIZE			(32 * 1024 * 1024)
+
+#define DMAMEM_SZ_ALL			(1 * 1024 * 1024)
+#define DMAMEM_BASE			(PHYS_SDRAM + PHYS_SDRAM_SIZE - \
+					 DMAMEM_SZ_ALL)
+
+#define CONFIG_SYS_MMC_ENV_DEV		0   /* USDHC1 */
+
+/*
+ * Configuration of the external SDRAM memory
+ */
+#define CONFIG_SYS_MALLOC_LEN		(1 * 1024 * 1024)
+
+/* For SPL */
+#ifdef CONFIG_SUPPORT_SPL
+#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
+#define CONFIG_SYS_SPL_LEN		0x00008000
+#define CONFIG_SYS_UBOOT_START		0x800023FD
+#endif
+/* For SPL ends */
+
+#endif /* __IMXRT1050_EVK_H */