| Message ID | 20200428192606.1808-2-dmurphy@ti.com |
|---|---|
| State | New |
| Headers | show |
| Series | TI Ethernet PHY changes | expand |
On 28. 04. 20 21:26, Dan Murphy wrote: > Add phy_set/clear_bit helper routines so that ported drivers from the > kernel can use these functions. > > Signed-off-by: Dan Murphy <dmurphy at ti.com> > --- > include/phy.h | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/include/phy.h b/include/phy.h > index b5de14cbfc29..1a875b96edb7 100644 > --- a/include/phy.h > +++ b/include/phy.h > @@ -170,6 +170,12 @@ struct fixed_link { > int asym_pause; > }; > > +/** > + * phy_read - Convenience function for reading a given PHY register > + * @phydev: the phy_device struct > + * @devad: The MMD to read from > + * @regnum: register number to read > + */ > static inline int phy_read(struct phy_device *phydev, int devad, int regnum) > { > struct mii_dev *bus = phydev->bus; > @@ -182,6 +188,13 @@ static inline int phy_read(struct phy_device *phydev, int devad, int regnum) > return bus->read(bus, phydev->addr, devad, regnum); > } > > +/** > + * phy_write - Convenience function for writing a given PHY register > + * @phydev: the phy_device struct > + * @devad: The MMD to read from > + * @regnum: register number to write > + * @val: value to write to @regnum > + */ > static inline int phy_write(struct phy_device *phydev, int devad, int regnum, > u16 val) > { > @@ -209,6 +222,13 @@ static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad, > (devad | MII_MMD_CTRL_NOINCR)); > } > > +/** > + * phy_read_mmd - Convenience function for reading a register > + * from an MMD on a given PHY. > + * @phydev: The phy_device struct > + * @devad: The MMD to read from > + * @regnum: The register on the MMD to read > + */ > static inline int phy_read_mmd(struct phy_device *phydev, int devad, > int regnum) > { > @@ -233,6 +253,14 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, > return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA); > } > > +/** > + * phy_write_mmd - Convenience function for writing a register > + * on an MMD on a given PHY. > + * @phydev: The phy_device struct > + * @devad: The MMD to read from > + * @regnum: The register on the MMD to read > + * @val: value to write to @regnum > + */ > static inline int phy_write_mmd(struct phy_device *phydev, int devad, > int regnum, u16 val) > { > @@ -257,6 +285,58 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad, > return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val); > } > > +/** > + * phy_set_bits_mmd - Convenience function for setting bits in a register > + * on MMD > + * @phydev: the phy_device struct > + * @devad: the MMD containing register to modify > + * @regnum: register number to modify > + * @val: bits to set > + */ > +static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, > + u32 regnum, u16 val) > +{ > + int value, ret; > + > + value = phy_read_mmd(phydev, devad, regnum); > + if (value < 0) > + return value; > + > + value |= val; > + > + ret = phy_write_mmd(phydev, devad, regnum, value); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > +/** > + * phy_clear_bits_mmd - Convenience function for clearing bits in a register > + * on MMD > + * @phydev: the phy_device struct > + * @devad: the MMD containing register to modify > + * @regnum: register number to modify > + * @val: bits to clear > + */ > +static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, > + u32 regnum, u16 val) > +{ > + int value, ret; > + > + value = phy_read_mmd(phydev, devad, regnum); > + if (value < 0) > + return value; > + > + value &= ~val; > + > + ret = phy_write_mmd(phydev, devad, regnum, value); > + if (ret < 0) > + return ret; > + > + return 0; > +} > + > #ifdef CONFIG_PHYLIB_10G > extern struct phy_driver gen10g_driver; > > Better would be to have one patch just with adding missing kernel-doc. It is not described in commit message too. And second to add that functions. And there are errors there. [u-boot](debian)$ ./scripts/kernel-doc -v -man include/phy.h > /dev/null include/phy.h:174: info: Scanning doc for phy_read include/phy.h:180: warning: No description found for return value of 'phy_read' include/phy.h:192: info: Scanning doc for phy_write include/phy.h:200: warning: No description found for return value of 'phy_write' include/phy.h:226: info: Scanning doc for phy_read_mmd include/phy.h:234: warning: No description found for return value of 'phy_read_mmd' include/phy.h:257: info: Scanning doc for phy_write_mmd include/phy.h:266: warning: No description found for return value of 'phy_write_mmd' include/phy.h:289: info: Scanning doc for phy_set_bits_mmd include/phy.h:298: warning: No description found for return value of 'phy_set_bits_mmd' include/phy.h:315: info: Scanning doc for phy_clear_bits_mmd include/phy.h:324: warning: No description found for return value of 'phy_clear_bits_mmd' Thanks, Michal
Michal On 4/30/20 3:00 AM, Michal Simek wrote: > On 28. 04. 20 21:26, Dan Murphy wrote: >> Add phy_set/clear_bit helper routines so that ported drivers from the >> kernel can use these functions. >> >> Signed-off-by: Dan Murphy <dmurphy at ti.com> >> --- >> include/phy.h | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 80 insertions(+) >> >> diff --git a/include/phy.h b/include/phy.h >> index b5de14cbfc29..1a875b96edb7 100644 >> --- a/include/phy.h >> +++ b/include/phy.h >> @@ -170,6 +170,12 @@ struct fixed_link { >> int asym_pause; >> }; >> >> +/** >> + * phy_read - Convenience function for reading a given PHY register >> + * @phydev: the phy_device struct >> + * @devad: The MMD to read from >> + * @regnum: register number to read >> + */ >> static inline int phy_read(struct phy_device *phydev, int devad, int regnum) >> { >> struct mii_dev *bus = phydev->bus; >> @@ -182,6 +188,13 @@ static inline int phy_read(struct phy_device *phydev, int devad, int regnum) >> return bus->read(bus, phydev->addr, devad, regnum); >> } >> >> +/** >> + * phy_write - Convenience function for writing a given PHY register >> + * @phydev: the phy_device struct >> + * @devad: The MMD to read from >> + * @regnum: register number to write >> + * @val: value to write to @regnum >> + */ >> static inline int phy_write(struct phy_device *phydev, int devad, int regnum, >> u16 val) >> { >> @@ -209,6 +222,13 @@ static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad, >> (devad | MII_MMD_CTRL_NOINCR)); >> } >> >> +/** >> + * phy_read_mmd - Convenience function for reading a register >> + * from an MMD on a given PHY. >> + * @phydev: The phy_device struct >> + * @devad: The MMD to read from >> + * @regnum: The register on the MMD to read >> + */ >> static inline int phy_read_mmd(struct phy_device *phydev, int devad, >> int regnum) >> { >> @@ -233,6 +253,14 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, >> return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA); >> } >> >> +/** >> + * phy_write_mmd - Convenience function for writing a register >> + * on an MMD on a given PHY. >> + * @phydev: The phy_device struct >> + * @devad: The MMD to read from >> + * @regnum: The register on the MMD to read >> + * @val: value to write to @regnum >> + */ >> static inline int phy_write_mmd(struct phy_device *phydev, int devad, >> int regnum, u16 val) >> { >> @@ -257,6 +285,58 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad, >> return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val); >> } >> >> +/** >> + * phy_set_bits_mmd - Convenience function for setting bits in a register >> + * on MMD >> + * @phydev: the phy_device struct >> + * @devad: the MMD containing register to modify >> + * @regnum: register number to modify >> + * @val: bits to set >> + */ >> +static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, >> + u32 regnum, u16 val) >> +{ >> + int value, ret; >> + >> + value = phy_read_mmd(phydev, devad, regnum); >> + if (value < 0) >> + return value; >> + >> + value |= val; >> + >> + ret = phy_write_mmd(phydev, devad, regnum, value); >> + if (ret < 0) >> + return ret; >> + >> + return 0; >> +} >> + >> +/** >> + * phy_clear_bits_mmd - Convenience function for clearing bits in a register >> + * on MMD >> + * @phydev: the phy_device struct >> + * @devad: the MMD containing register to modify >> + * @regnum: register number to modify >> + * @val: bits to clear >> + */ >> +static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, >> + u32 regnum, u16 val) >> +{ >> + int value, ret; >> + >> + value = phy_read_mmd(phydev, devad, regnum); >> + if (value < 0) >> + return value; >> + >> + value &= ~val; >> + >> + ret = phy_write_mmd(phydev, devad, regnum, value); >> + if (ret < 0) >> + return ret; >> + >> + return 0; >> +} >> + >> #ifdef CONFIG_PHYLIB_10G >> extern struct phy_driver gen10g_driver; >> >> > Better would be to have one patch just with adding missing kernel-doc. > It is not described in commit message too. Yes I was thinking that I should have done 2 patches since the kernel doc to the other functions is completely separate work. > > And second to add that functions. > > And there are errors there. > > [u-boot](debian)$ ./scripts/kernel-doc -v -man include/phy.h > /dev/null I learned something new today.? Now I know how to check my kernel doc :) I will fix these. Dan
diff --git a/include/phy.h b/include/phy.h index b5de14cbfc29..1a875b96edb7 100644 --- a/include/phy.h +++ b/include/phy.h @@ -170,6 +170,12 @@ struct fixed_link { int asym_pause; }; +/** + * phy_read - Convenience function for reading a given PHY register + * @phydev: the phy_device struct + * @devad: The MMD to read from + * @regnum: register number to read + */ static inline int phy_read(struct phy_device *phydev, int devad, int regnum) { struct mii_dev *bus = phydev->bus; @@ -182,6 +188,13 @@ static inline int phy_read(struct phy_device *phydev, int devad, int regnum) return bus->read(bus, phydev->addr, devad, regnum); } +/** + * phy_write - Convenience function for writing a given PHY register + * @phydev: the phy_device struct + * @devad: The MMD to read from + * @regnum: register number to write + * @val: value to write to @regnum + */ static inline int phy_write(struct phy_device *phydev, int devad, int regnum, u16 val) { @@ -209,6 +222,13 @@ static inline void phy_mmd_start_indirect(struct phy_device *phydev, int devad, (devad | MII_MMD_CTRL_NOINCR)); } +/** + * phy_read_mmd - Convenience function for reading a register + * from an MMD on a given PHY. + * @phydev: The phy_device struct + * @devad: The MMD to read from + * @regnum: The register on the MMD to read + */ static inline int phy_read_mmd(struct phy_device *phydev, int devad, int regnum) { @@ -233,6 +253,14 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, return phy_read(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA); } +/** + * phy_write_mmd - Convenience function for writing a register + * on an MMD on a given PHY. + * @phydev: The phy_device struct + * @devad: The MMD to read from + * @regnum: The register on the MMD to read + * @val: value to write to @regnum + */ static inline int phy_write_mmd(struct phy_device *phydev, int devad, int regnum, u16 val) { @@ -257,6 +285,58 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad, return phy_write(phydev, MDIO_DEVAD_NONE, MII_MMD_DATA, val); } +/** + * phy_set_bits_mmd - Convenience function for setting bits in a register + * on MMD + * @phydev: the phy_device struct + * @devad: the MMD containing register to modify + * @regnum: register number to modify + * @val: bits to set + */ +static inline int phy_set_bits_mmd(struct phy_device *phydev, int devad, + u32 regnum, u16 val) +{ + int value, ret; + + value = phy_read_mmd(phydev, devad, regnum); + if (value < 0) + return value; + + value |= val; + + ret = phy_write_mmd(phydev, devad, regnum, value); + if (ret < 0) + return ret; + + return 0; +} + +/** + * phy_clear_bits_mmd - Convenience function for clearing bits in a register + * on MMD + * @phydev: the phy_device struct + * @devad: the MMD containing register to modify + * @regnum: register number to modify + * @val: bits to clear + */ +static inline int phy_clear_bits_mmd(struct phy_device *phydev, int devad, + u32 regnum, u16 val) +{ + int value, ret; + + value = phy_read_mmd(phydev, devad, regnum); + if (value < 0) + return value; + + value &= ~val; + + ret = phy_write_mmd(phydev, devad, regnum, value); + if (ret < 0) + return ret; + + return 0; +} + #ifdef CONFIG_PHYLIB_10G extern struct phy_driver gen10g_driver;
Add phy_set/clear_bit helper routines so that ported drivers from the kernel can use these functions. Signed-off-by: Dan Murphy <dmurphy at ti.com> --- include/phy.h | 80 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)