diff mbox series

[v1,11/49] arm: dts: ns3: add emmc node

Message ID 20200427105207.5659-12-rayagonda.kokatanur@broadcom.com
State Superseded
Headers show
Series add support for broadcom NS3 soc | expand

Commit Message

Rayagonda Kokatanur April 27, 2020, 10:51 a.m. UTC 
From: Pramod Kumar <pramod.kumar at broadcom.com>

Add emmc dt nodes for ns3.

Signed-off-by: Pramod Kumar <pramod.kumar at broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur at broadcom.com>
---
 arch/arm/dts/ns3-board.dts |  4 ++++
 arch/arm/dts/ns3.dtsi      | 18 ++++++++++++++++++
 2 files changed, 22 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/dts/ns3-board.dts b/arch/arm/dts/ns3-board.dts
index 92699910cb..afce01de8a 100644
--- a/arch/arm/dts/ns3-board.dts
+++ b/arch/arm/dts/ns3-board.dts
@@ -23,3 +23,7 @@ 
 &uart1 {
 	status = "okay";
 };
+
+&sdio0 {
+	status = "okay";
+};
diff --git a/arch/arm/dts/ns3.dtsi b/arch/arm/dts/ns3.dtsi
index 84464add9a..7f94b922fc 100644
--- a/arch/arm/dts/ns3.dtsi
+++ b/arch/arm/dts/ns3.dtsi
@@ -33,6 +33,24 @@ 
 			status = "disabled";
 		};
 
+		sdio0: sdhci at 3f1000 {
+			compatible = "brcm,iproc-sdhci";
+			reg = <0x003f1000 0x100>;
+			bus-width = <8>;
+			clock-freq-min-max = <400000 200000000>;
+			index = <0>;
+			status = "disabled";
+		};
+
+		sdio1: sdhci at 3f2000 {
+			compatible = "brcm,iproc-sdhci";
+			reg = <0x003f2000 0x100>;
+			bus-width = <8>;
+			clock-freq-min-max = <400000 200000000>;
+			index = <1>;
+			status = "disabled";
+		};
+
 		gpio_hsls: gpio at d0000 {
 			compatible = "brcm,iproc-gpio";
 			reg = <0x000d0000 0x864>;