diff mbox series

[v3,1/9] rockchip: dts: rk3328-evb: Move vcc5v0-host-xhci-drv to -u-boot.dtsi

Message ID 20200427065254.15397-2-wens@kernel.org
State Superseded
Headers show
Series rockchip: rk3328: sync dts and add ROC-RK3328-CC board | expand

Commit Message

Chen-Yu Tsai April 27, 2020, 6:52 a.m. UTC 
From: Chen-Yu Tsai <wens at csie.org>

USB 3.0 is only supported in U-boot, not in the Linux kernel where the
device tree files are ultimately synced from. While the xhci node was
moved, the external vbus regulator was not.

Move it as well.

Fixes: 2e91e2025c1b ("rockchip: rk3328: migrate u-boot node to -u-boot.dtsi")
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Tested-by: Loic Devulder <ldevulder at suse.com>
Tested-by: Peter Geis <pgwipeout at gmail.com>
Signed-off-by: Chen-Yu Tsai <wens at csie.org>
---
Changes since v2:
  - none
Changes since v1:
  - Added Kever's reviewed-by
---
 arch/arm/dts/rk3328-evb-u-boot.dtsi | 11 +++++++++++
 arch/arm/dts/rk3328-evb.dts         |  9 ---------
 2 files changed, 11 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/dts/rk3328-evb-u-boot.dtsi b/arch/arm/dts/rk3328-evb-u-boot.dtsi
index 4a827063c555..5679897279aa 100644
--- a/arch/arm/dts/rk3328-evb-u-boot.dtsi
+++ b/arch/arm/dts/rk3328-evb-u-boot.dtsi
@@ -6,6 +6,17 @@ 
 #include "rk3328-u-boot.dtsi"
 #include "rk3328-sdram-ddr3-666.dtsi"
 
+/{
+	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc5v0_host_xhci";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+};
+
 &usb_host0_xhci {
 	vbus-supply = <&vcc5v0_host_xhci>;
 	status = "okay";
diff --git a/arch/arm/dts/rk3328-evb.dts b/arch/arm/dts/rk3328-evb.dts
index a2ee838fcd6b..e9bc849f8c23 100644
--- a/arch/arm/dts/rk3328-evb.dts
+++ b/arch/arm/dts/rk3328-evb.dts
@@ -38,15 +38,6 @@ 
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
-		compatible = "regulator-fixed";
-		enable-active-high;
-		regulator-name = "vcc5v0_host_xhci";
-		gpio = <&gpio0 0 GPIO_ACTIVE_HIGH>;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-	};
-
 	vcc_phy: vcc-phy-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_phy";