@@ -153,8 +153,6 @@ int irq_request(struct udevice *dev, struct irq *irq)
const struct irq_ops *ops;
log_debug("(dev=%p, irq=%p)\n", dev, irq);
- if (!irq)
- return 0;
ops = irq_get_ops(dev);
irq->dev = dev;
@@ -176,6 +174,22 @@ int irq_first_device_type(enum irq_dev_t type, struct udevice **devp)
return 0;
}
+#if CONFIG_IS_ENABLED(ACPIGEN)
+int irq_get_acpi(const struct irq *irq, struct acpi_irq *acpi_irq)
+{
+ struct irq_ops *ops;
+
+ if (!irq_is_valid(irq))
+ return -EINVAL;
+
+ ops = irq_get_ops(irq->dev);
+ if (!ops->get_acpi)
+ return -ENOSYS;
+
+ return ops->get_acpi(irq, acpi_irq);
+}
+#endif
+
UCLASS_DRIVER(irq) = {
.id = UCLASS_IRQ,
.name = "irq",
@@ -8,6 +8,7 @@
#include <common.h>
#include <dm.h>
#include <irq.h>
+#include <acpi/acpi_device.h>
#include <asm/test.h>
/**
@@ -73,6 +74,18 @@ static int sandbox_irq_of_xlate(struct irq *irq,
return 0;
}
+static __maybe_unused int sandbox_get_acpi(const struct irq *irq,
+ struct acpi_irq *acpi_irq)
+{
+ acpi_irq->pin = irq->id;
+ acpi_irq->mode = ACPI_IRQ_LEVEL_TRIGGERED;
+ acpi_irq->polarity = ACPI_IRQ_ACTIVE_HIGH;
+ acpi_irq->shared = ACPI_IRQ_SHARED;
+ acpi_irq->wake = ACPI_IRQ_WAKE;
+
+ return 0;
+}
+
static const struct irq_ops sandbox_irq_ops = {
.route_pmc_gpio_gpe = sandbox_route_pmc_gpio_gpe,
.set_polarity = sandbox_set_polarity,
@@ -80,6 +93,9 @@ static const struct irq_ops sandbox_irq_ops = {
.restore_polarities = sandbox_restore_polarities,
.read_and_clear = sandbox_irq_read_and_clear,
.of_xlate = sandbox_irq_of_xlate,
+#if CONFIG_IS_ENABLED(ACPIGEN)
+ .get_acpi = sandbox_get_acpi,
+#endif
};
static const struct udevice_id sandbox_irq_ids[] = {
@@ -11,6 +11,12 @@
struct udevice;
+/* ACPI descriptor values for common descriptors: SERIAL_BUS means I2C */
+#define ACPI_DESCRIPTOR_LARGE BIT(7)
+#define ACPI_DESCRIPTOR_INTERRUPT (ACPI_DESCRIPTOR_LARGE | 9)
+#define ACPI_DESCRIPTOR_GPIO (ACPI_DESCRIPTOR_LARGE | 12)
+#define ACPI_DESCRIPTOR_SERIAL_BUS (ACPI_DESCRIPTOR_LARGE | 14)
+
/* Length of a full path to an ACPI device */
#define ACPI_PATH_MAX 30
@@ -29,6 +35,59 @@ enum acpi_dev_status {
ACPI_DSTATUS_SHOW_IN_UI,
};
+/** enum acpi_irq_mode - edge/level trigger mode */
+enum acpi_irq_mode {
+ ACPI_IRQ_EDGE_TRIGGERED,
+ ACPI_IRQ_LEVEL_TRIGGERED,
+};
+
+/**
+ * enum acpi_irq_polarity - polarity of interrupt
+ *
+ * @ACPI_IRQ_ACTIVE_LOW - for ACPI_IRQ_EDGE_TRIGGERED this means falling edge
+ * @ACPI_IRQ_ACTIVE_HIGH - for ACPI_IRQ_EDGE_TRIGGERED this means rising edge
+ * @ACPI_IRQ_ACTIVE_BOTH - not meaningful for ACPI_IRQ_EDGE_TRIGGERED
+ */
+enum acpi_irq_polarity {
+ ACPI_IRQ_ACTIVE_LOW,
+ ACPI_IRQ_ACTIVE_HIGH,
+ ACPI_IRQ_ACTIVE_BOTH,
+};
+
+/**
+ * enum acpi_irq_shared - whether interrupt is shared or not
+ *
+ * @ACPI_IRQ_EXCLUSIVE: only this device uses the interrupt
+ * @ACPI_IRQ_SHARED: other devices may use this interrupt
+ */
+enum acpi_irq_shared {
+ ACPI_IRQ_EXCLUSIVE,
+ ACPI_IRQ_SHARED,
+};
+
+/** enum acpi_irq_wake - indicates whether this interrupt can wake the device */
+enum acpi_irq_wake {
+ ACPI_IRQ_NO_WAKE,
+ ACPI_IRQ_WAKE,
+};
+
+/**
+ * struct acpi_irq - representation of an ACPI interrupt
+ *
+ * @pin: ACPI pin that is monitored for the interrupt
+ * @mode: Edge/level triggering
+ * @polarity: Interrupt polarity
+ * @shared: Whether interrupt is shared or not
+ * @wake: Whether interrupt can wake the device from sleep
+ */
+struct acpi_irq {
+ unsigned int pin;
+ enum acpi_irq_mode mode;
+ enum acpi_irq_polarity polarity;
+ enum acpi_irq_shared shared;
+ enum acpi_irq_wake wake;
+};
+
/**
* acpi_device_path() - Get the full path to an ACPI device
*
@@ -8,6 +8,9 @@
#ifndef __irq_H
#define __irq_H
+struct acpi_irq;
+struct ofnode_phandle_args;
+
/*
* Interrupt controller types available. You can find a particular one with
* irq_first_device_type()
@@ -24,10 +27,12 @@ enum irq_dev_t {
*
* @dev: IRQ device that handles this irq
* @id: ID to identify this irq with the device
+ * @flags: Flags associated with this interrupt (IRQ_TYPE_...)
*/
struct irq {
struct udevice *dev;
ulong id;
+ ulong flags;
};
/**
@@ -119,10 +124,36 @@ struct irq_ops {
* @return 0 if OK, or a negative error code.
*/
int (*free)(struct irq *irq);
+
+#if CONFIG_IS_ENABLED(ACPIGEN)
+ /**
+ * get_acpi() - Get the ACPI info for an irq
+ *
+ * This converts a irq to an ACPI structure for adding to the ACPI
+ * tables.
+ *
+ * @irq: irq to convert
+ * @acpi_irq: Output ACPI interrupt information
+ * @return ACPI pin number or -ve on error
+ */
+ int (*get_acpi)(const struct irq *irq, struct acpi_irq *acpi_irq);
+#endif
};
#define irq_get_ops(dev) ((struct irq_ops *)(dev)->driver->ops)
+/**
+ * irq_is_valid() - Check if an IRQ is valid
+ *
+ * @irq: IRQ description containing device and ID, e.g. previously
+ * returned by irq_get_by_index()
+ * @return true if valid, false if not
+ */
+static inline bool irq_is_valid(const struct irq *irq)
+{
+ return irq->dev != NULL;
+}
+
/**
* irq_route_pmc_gpio_gpe() - Get the GPIO for an event
*
@@ -223,4 +254,16 @@ int irq_free(struct irq *irq);
*/
int irq_first_device_type(enum irq_dev_t type, struct udevice **devp);
+/**
+ * irq_get_acpi() - Get the ACPI info for an irq
+ *
+ * This converts a irq to an ACPI structure for adding to the ACPI
+ * tables.
+ *
+ * @irq: irq to convert
+ * @acpi_irq: Output ACPI interrupt information
+ * @return ACPI pin number or -ve on error
+ */
+int irq_get_acpi(const struct irq *irq, struct acpi_irq *acpi_irq);
+
#endif
@@ -8,6 +8,7 @@
#include <common.h>
#include <dm.h>
#include <irq.h>
+#include <acpi/acpi_device.h>
#include <asm/test.h>
#include <dm/test.h>
#include <test/ut.h>
@@ -75,3 +76,24 @@ static int dm_test_request(struct unit_test_state *uts)
return 0;
}
DM_TEST(dm_test_request, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
+
+/* Test of irq_get_acpi() */
+static int dm_test_irq_get_acpi(struct unit_test_state *uts)
+{
+ struct acpi_irq airq;
+ struct udevice *dev;
+ struct irq irq;
+
+ ut_assertok(uclass_first_device_err(UCLASS_TEST_FDT, &dev));
+ ut_assertok(irq_get_by_index(dev, 0, &irq));
+
+ ut_assertok(irq_get_acpi(&irq, &airq));
+ ut_asserteq(3, airq.pin);
+ ut_asserteq(ACPI_IRQ_LEVEL_TRIGGERED, airq.mode);
+ ut_asserteq(ACPI_IRQ_ACTIVE_HIGH, airq.polarity);
+ ut_asserteq(ACPI_IRQ_SHARED, airq.shared);
+ ut_asserteq(ACPI_IRQ_WAKE, airq.wake);
+
+ return 0;
+}
+DM_TEST(dm_test_irq_get_acpi, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
When generating ACPI tables we need to convert IRQs in U-Boot to the ACPI structures required by ACPI. This is a SoC-specific conversion and cannot be handled by generic code, so add a new IRQ method to do the conversion. Signed-off-by: Simon Glass <sjg at chromium.org> --- Changes in v8: - Move header definitions into this patch Changes in v3: - Fix 'the an' typo Changes in v2: None drivers/misc/irq-uclass.c | 18 ++++++++++-- drivers/misc/irq_sandbox.c | 16 +++++++++++ include/acpi/acpi_device.h | 59 ++++++++++++++++++++++++++++++++++++++ include/irq.h | 43 +++++++++++++++++++++++++++ test/dm/irq.c | 22 ++++++++++++++ 5 files changed, 156 insertions(+), 2 deletions(-)