@@ -1,54 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
#
# Kbuild for top-level directory of U-Boot
-# This file takes care of the following:
-# 1) Generate generic-asm-offsets.h
-# 2) Generate asm-offsets.h
-
-# Default sed regexp - multiline due to syntax constraints
-define sed-y
- "s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
- /^->/{s:->#\(.*\):/* \1 */:; \
- s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
- s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
- s:->::; p;}"
-endef
-
-# Use filechk to avoid rebuilds when a header changes, but the resulting file
-# does not
-define filechk_offsets
- (set -e; \
- echo "#ifndef $2"; \
- echo "#define $2"; \
- echo "/*"; \
- echo " * DO NOT MODIFY."; \
- echo " *"; \
- echo " * This file was generated by Kbuild"; \
- echo " */"; \
- echo ""; \
- sed -ne $(sed-y); \
- echo ""; \
- echo "#endif" )
-endef
#####
-# 1) Generate generic-asm-offsets.h
+# Generate generic-asm-offsets.h
generic-offsets-file := include/generated/generic-asm-offsets.h
always := $(generic-offsets-file)
targets := lib/asm-offsets.s
-# We use internal kbuild rules to avoid the "is up to date" message from make
-lib/asm-offsets.s: lib/asm-offsets.c FORCE
- $(Q)mkdir -p $(dir $@)
- $(call if_changed_dep,cc_s_c)
-
$(obj)/$(generic-offsets-file): lib/asm-offsets.s FORCE
$(call filechk,offsets,__GENERIC_ASM_OFFSETS_H__)
#####
-# 2) Generate asm-offsets.h
-#
+# Generate asm-offsets.h
ifneq ($(wildcard $(srctree)/arch/$(ARCH)/lib/asm-offsets.c),)
offsets-file := include/generated/asm-offsets.h
@@ -59,10 +25,5 @@ targets += arch/$(ARCH)/lib/asm-offsets.s
CFLAGS_asm-offsets.o := -DDO_DEPS_ONLY
-# We use internal kbuild rules to avoid the "is up to date" message from make
-arch/$(ARCH)/lib/asm-offsets.s: arch/$(ARCH)/lib/asm-offsets.c FORCE
- $(Q)mkdir -p $(dir $@)
- $(call if_changed_dep,cc_s_c)
-
$(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s FORCE
$(call filechk,offsets,__ASM_OFFSETS_H__)
@@ -2239,8 +2239,7 @@ quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files))
# read all saved command lines
-targets := $(wildcard $(sort $(targets)))
-cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+cmd_files := $(wildcard .*.cmd $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
$(cmd_files): ; # Do not try to update included dependency files
@@ -7,6 +7,7 @@ quote := "
squote := '
empty :=
space := $(empty) $(empty)
+space_escape := _-_SPACE_-_
pound := \#
###
@@ -234,10 +235,10 @@ objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
# See Documentation/kbuild/makefiles.txt for more info
ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments has same arguments. Result is empty string if equal.
-# User may override this check using make KBUILD_NOCMDDEP=1
-arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
- $(filter-out $(cmd_$@), $(cmd_$(1))) )
+# Check if both arguments are the same including their order. Result is empty
+# string if equal. User may override this check using make KBUILD_NOCMDDEP=1
+arg-check = $(filter-out $(subst $(space),$(space_escape),$(strip $(cmd_$@))), \
+ $(subst $(space),$(space_escape),$(strip $(cmd_$1))))
else
arg-check = $(if $(strip $(cmd_$@)),,1)
endif
@@ -259,7 +260,7 @@ any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
- printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd, @:)
# Execute the command and also postprocess generated .d dependencies file.
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
@@ -267,14 +268,14 @@ if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
$(echo-cmd) $(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp;\
rm -f $(depfile); \
- mv -f $(dot-target).tmp $(dot-target).cmd)
+ mv -f $(dot-target).tmp $(dot-target).cmd, @:)
# Usage: $(call if_changed_rule,foo)
# Will check if $(cmd_foo) or any of the prerequisites changed,
# and if so will execute $(rule_foo).
if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \
@set -e; \
- $(rule_$(1)))
+ $(rule_$(1)), @:)
###
# why - tell why a a target got build
@@ -75,17 +75,6 @@ ifneq ($(hostprogs-y)$(hostprogs-m)$(hostlibs-y)$(hostlibs-m)$(hostcxxlibs-y)$(h
include scripts/Makefile.host
endif
-# Uncommented for U-Boot
-# We need to create output dicrectory for SPL and TPL even for in-tree build
-#ifneq ($(KBUILD_SRC),)
-# Create output directory if not already present
-_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
-
-# Create directories for object files if directory does not exist
-# Needed when obj-y := dir/file.o syntax is used
-_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
-#endif
-
ifndef obj
$(warning kbuild: Makefile.build is included improperly)
endif
@@ -441,11 +430,14 @@ FORCE:
# optimization, we don't need to read them if the target does not
# exist, we will rebuild anyway in that case.
-targets := $(wildcard $(sort $(targets)))
-cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+cmd_files := $(wildcard $(foreach f,$(sort $(targets)),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
include $(cmd_files)
endif
+# Create directories for object files if they do not exist
+obj-dirs := $(sort $(obj) $(patsubst %/,%, $(dir $(targets))))
+$(shell mkdir -p $(obj-dirs))
+
.PHONY: $(PHONY)
@@ -53,15 +53,6 @@ host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
host-cxxshobjs := $(sort $(foreach m,$(host-cxxshlib),$($(m:.so=-objs))))
-# output directory for programs/.o files
-# hostprogs-y := tools/build may have been specified.
-# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation
-host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs))
-
-host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
-
-
-__hostprogs := $(addprefix $(obj)/,$(__hostprogs))
host-csingle := $(addprefix $(obj)/,$(host-csingle))
host-cmulti := $(addprefix $(obj)/,$(host-cmulti))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
@@ -72,9 +63,6 @@ host-cxxshlib := $(addprefix $(obj)/,$(host-cxxshlib))
host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
host-cxxshobjs := $(addprefix $(obj)/,$(host-cxxshobjs))
host-shared := $(addprefix $(obj)/,$(host-shared))
-host-objdirs := $(addprefix $(obj)/,$(host-objdirs))
-
-obj-dirs += $(host-objdirs)
#####
# Handle options to gcc. Support building with separate output directory
@@ -57,15 +57,11 @@ single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
# objects depend on those (obviously)
multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
-multi-objs := $(multi-objs-y) $(multi-objs-m)
# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.o, $(obj-y))
-# $(obj-dirs) is a list of directories that contain object files
-obj-dirs := $(dir $(multi-objs) $(obj-y))
-
# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
@@ -88,7 +84,6 @@ multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
-obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
# These flags are needed for modversions and compiling, so we define them here
# already
@@ -97,10 +92,10 @@ obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
# Note: Files that end up in two or more modules are compiled without the
# KBUILD_MODNAME definition. The reason is that any made-up name would
# differ in different configs.
-name-fix = $(subst $(comma),_,$(subst -,_,$1))
-basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
+name-fix = $(squote)$(quote)$(subst $(comma),_,$(subst -,_,$1))$(quote)$(squote)
+basename_flags = -DKBUILD_BASENAME=$(call name-fix,$(basetarget))
modname_flags = $(if $(filter 1,$(words $(modname))),\
- -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
+ -DKBUILD_MODNAME=$(call name-fix,$(modname)))
orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
@@ -153,7 +148,7 @@ endif
# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
$(__c_flags) $(modkern_cflags) \
- -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
+ $(basename_flags) $(modname_flags)
a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
$(__a_flags) $(modkern_aflags)
@@ -576,3 +571,32 @@ quiet_cmd_fdtgrep = FDTGREP $@
quiet_cmd_fdt_rm_props = FDTGREP $@
cmd_fdt_rm_props = cat $< | $(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_REMOVE_PROPS)))
+
+# ASM offsets
+# ---------------------------------------------------------------------------
+
+# Default sed regexp - multiline due to syntax constraints
+define sed-offsets
+ "s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \
+ /^->/{s:->#\(.*\):/* \1 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
+ s:->::; p;}"
+endef
+
+# Use filechk to avoid rebuilds when a header changes, but the resulting file
+# does not
+define filechk_offsets
+ (set -e; \
+ echo "#ifndef $2"; \
+ echo "#define $2"; \
+ echo "/*"; \
+ echo " * DO NOT MODIFY."; \
+ echo " *"; \
+ echo " * This file was generated by Kbuild"; \
+ echo " */"; \
+ echo ""; \
+ sed -ne $(sed-offsets); \
+ echo ""; \
+ echo "#endif" )
+endef
b42841b7bb62 kbuild: Get rid of KBUILD_STR 2aedcd098a94 kbuild: suppress annoying "... is up to date." message 9c8fa9bc08f6 kbuild: fix if_change and friends to consider argument order ebf003f0cfb3 kbuild: Consolidate header generation from ASM offset information 2982c953570b kbuild: remove redundant $(wildcard ...) for cmd_files calculation 8a78756eb545 kbuild: create object directories simpler and faster 4d4b5c2e3b6e treewide: remove explicit rules for *offsets.s 01d509a48b46 kbuild: remove unimportant comments from ./Kbuild Signed-off-by: Masahiro Yamada <masahiroy at kernel.org> --- Changes in v2: - Check-pick two more while I am here - Rebase on the mainline Kbuild | 45 +++--------------------------------------- Makefile | 3 +-- scripts/Kbuild.include | 15 +++++++------- scripts/Makefile.build | 18 +++++------------ scripts/Makefile.host | 12 ----------- scripts/Makefile.lib | 42 ++++++++++++++++++++++++++++++--------- 6 files changed, 50 insertions(+), 85 deletions(-)