@@ -53,15 +53,13 @@
};
sflash: sflash-controller at f4324000 {
- #address-cells = <2>;
- #size-cells = <1>;
compatible = "cortina,ca-sflash";
reg = <0x0 0xf4324000 0x50>;
reg-names = "sflash-regs";
flash at 0 {
compatible = "jedec,spi-nor";
- spi-rx-bus-width = <1>;
- spi-max-frequency = <108000000>;
+ spi-rx-bus-width = <4>;
+ spi-tx-bus-width = <4>;
};
};
@@ -14,7 +14,7 @@
#include <asm/psci.h>
#include <cpu_func.h>
#include <asm/armv8/mmu.h>
-
+#include <dm/uclass.h>
DECLARE_GLOBAL_DATA_PTR;
#define CA_PERIPH_BASE 0xE0000000UL
@@ -70,9 +70,23 @@ static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
return function_id;
}
+#ifdef CONFIG_CORTINA_SFLASH
+static int init_sflash(void)
+{
+ struct udevice *dev;
+
+ uclass_first_device(UCLASS_SPI, &dev);
+
+ return 0;
+}
+#endif
+
int board_early_init_r(void)
{
dcache_disable();
+#ifdef CONFIG_CORTINA_SFLASH
+ init_sflash();
+#endif
return 0;
}
new file mode 100644
@@ -0,0 +1,48 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_LOGLEVEL=7
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_CORTINA=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CORTINA_SFLASH=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
new file mode 100644
@@ -0,0 +1,59 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_ENV_SIZE=0x20000
+CONFIG_DM_GPIO=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_PART=y
+CONFIG_CMD_SF_TEST=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_CA=y
+CONFIG_LED=y
+CONFIG_LED_CORTINA=y
+CONFIG_DM_MMC=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_CORTINA=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_ISSI=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_XMC=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CORTINA_SFLASH=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
Add SPI NOR support for Cortina Access Presidio Engineering Board Signed-off-by: Alex Nemirovsky <alex.nemirovsky at cortina-access.com> CC: Jagan Teki <jagan at amarulasolutions.com> CC: Vignesh R <vigneshr at ti.com> --- Changes in v5: - NAND support removed from presidio-asic board DT. Changes in v4: None Changes in v3: None Changes in v2: None arch/arm/dts/ca-presidio-engboard.dts | 6 +-- board/cortina/presidio-asic/presidio.c | 16 ++++++- configs/cortina_presidio-asic-spi-nand_defconfig | 48 +++++++++++++++++++ configs/cortina_presidio-asic-spi-nor_defconfig | 59 ++++++++++++++++++++++++ 4 files changed, 124 insertions(+), 5 deletions(-) create mode 100644 configs/cortina_presidio-asic-spi-nand_defconfig create mode 100644 configs/cortina_presidio-asic-spi-nor_defconfig