new file mode 100644
@@ -0,0 +1,1114 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
+ * Author: Ludovic Barre <ludovic.barre at st.com> for STMicroelectronics.
+ */
+#include <dt-bindings/pinctrl/stm32-pinfunc.h>
+
+&pinctrl {
+ adc1_in6_pins_a: adc1-in6 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
+ };
+ };
+
+ adc12_ain_pins_a: adc12-ain-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
+ <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+ <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
+ <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
+ };
+ };
+
+ adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
+ <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
+ };
+ };
+
+ cec_pins_a: cec-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, AF4)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ cec_pins_sleep_a: cec-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
+ cec_pins_b: cec-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, AF5)>;
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ cec_pins_sleep_b: cec-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
+ };
+ };
+
+ dac_ch1_pins_a: dac-ch1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
+ };
+ };
+
+ dac_ch2_pins_a: dac-ch2 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
+ };
+ };
+
+ dcmi_pins_a: dcmi-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
+ <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
+ <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */
+ <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */
+ <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
+ bias-disable;
+ };
+ };
+
+ dcmi_sleep_pins_a: dcmi-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
+ <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
+ <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
+ <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
+ <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
+ <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
+ <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
+ <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
+ <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
+ <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */
+ <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
+ <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
+ <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */
+ <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */
+ <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
+ };
+ };
+
+ ethernet0_rgmii_pins_a: rgmii-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <2>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+ bias-disable;
+ };
+ };
+
+ ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+ <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+ <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+ <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+ <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+ <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+ <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+ <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+ <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
+ <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+ };
+ };
+
+ fmc_pins_a: fmc-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
+ <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
+ bias-pull-up;
+ };
+ };
+
+ fmc_sleep_pins_a: fmc-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
+ <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
+ <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
+ <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
+ <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
+ <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
+ <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
+ <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
+ <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
+ <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
+ <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
+ <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
+ <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
+ };
+ };
+
+ i2c1_pins_a: i2c1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_sleep_a: i2c1-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
+ i2c1_pins_b: i2c1-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c1_pins_sleep_b: i2c1-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
+ };
+ };
+
+ i2c2_pins_a: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_a: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
+ <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
+ i2c2_pins_b1: i2c2-2 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b1: i2c2-3 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+ };
+ };
+
+ i2c5_pins_a: i2c5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c5_pins_sleep_a: i2c5-1 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
+ <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
+
+ };
+ };
+
+ i2s2_pins_a: i2s2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ i2s2_pins_sleep_a: i2s2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
+ <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
+ };
+ };
+
+ ltdc_pins_a: ltdc-a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ ltdc_pins_sleep_a: ltdc-a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
+ ltdc_pins_b: ltdc-b-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
+ <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */
+ <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
+ <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
+ <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ ltdc_pins_sleep_b: ltdc-b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
+ <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
+ <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
+ <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */
+ <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
+ <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */
+ <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */
+ <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */
+ <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */
+ <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */
+ <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */
+ <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */
+ <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */
+ <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */
+ <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */
+ <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
+ <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
+ <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */
+ <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */
+ <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */
+ <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
+ <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
+ <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
+ <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
+ <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */
+ <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */
+ <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */
+ <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */
+ };
+ };
+
+ m_can1_pins_a: m-can1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
+ bias-disable;
+ };
+ };
+
+ m_can1_sleep_pins_a: m_can1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
+ <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
+ };
+ };
+
+ pwm1_pins_a: pwm1-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
+ <STM32_PINMUX('E', 11, AF1)>, /* TIM1_CH2 */
+ <STM32_PINMUX('E', 14, AF1)>; /* TIM1_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm1_sleep_pins_a: pwm1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('E', 9, ANALOG)>, /* TIM1_CH1 */
+ <STM32_PINMUX('E', 11, ANALOG)>, /* TIM1_CH2 */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* TIM1_CH4 */
+ };
+ };
+
+ pwm2_pins_a: pwm2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm2_sleep_pins_a: pwm2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* TIM2_CH4 */
+ };
+ };
+
+ pwm3_pins_a: pwm3-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 7, AF2)>; /* TIM3_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm3_sleep_pins_a: pwm3-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 7, ANALOG)>; /* TIM3_CH2 */
+ };
+ };
+
+ pwm4_pins_a: pwm4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
+ <STM32_PINMUX('D', 15, AF2)>; /* TIM4_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm4_sleep_pins_a: pwm4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 14, ANALOG)>, /* TIM4_CH3 */
+ <STM32_PINMUX('D', 15, ANALOG)>; /* TIM4_CH4 */
+ };
+ };
+
+ pwm4_pins_b: pwm4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm4_sleep_pins_b: pwm4-sleep-1 {
+ pins {
+ pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */
+ };
+ };
+
+ pwm5_pins_a: pwm5-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, AF2)>; /* TIM5_CH2 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm5_sleep_pins_a: pwm5-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 11, ANALOG)>; /* TIM5_CH2 */
+ };
+ };
+
+ pwm8_pins_a: pwm8-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm8_sleep_pins_a: pwm8-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 2, ANALOG)>; /* TIM8_CH4 */
+ };
+ };
+
+ pwm12_pins_a: pwm12-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
+ bias-pull-down;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ };
+
+ pwm12_sleep_pins_a: pwm12-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 6, ANALOG)>; /* TIM12_CH1 */
+ };
+ };
+
+ qspi_clk_pins_a: qspi-clk-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ };
+
+ qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
+ };
+ };
+
+ qspi_bk1_pins_a: qspi-bk1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
+ <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
+ <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
+ <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
+ <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
+ };
+ };
+
+ qspi_bk2_pins_a: qspi-bk2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+ };
+
+ qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
+ <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
+ <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
+ <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
+ <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
+ };
+ };
+
+ sai2a_pins_a: sai2a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai2a_sleep_pins_a: sai2a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
+ <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
+ <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
+ <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
+ };
+ };
+
+ sai2b_pins_a: sai2b-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_a: sai2b-1 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
+ <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
+ <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
+ <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
+ };
+ };
+
+ sai2b_pins_b: sai2b-2 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+ bias-disable;
+ };
+ };
+
+ sai2b_sleep_pins_b: sai2b-3 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+ };
+ };
+
+ sai4a_pins_a: sai4a-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
+ slew-rate = <0>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sai4a_sleep_pins_a: sai4a-1 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
+ };
+ };
+
+ sdmmc1_b4_pins_a: sdmmc1-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, AF12)>; /* SDMMC1_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
+ <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
+ <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
+ <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
+ <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
+ <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
+ };
+ };
+
+ sdmmc1_dir_pins_a: sdmmc1-dir-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2{
+ pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+ bias-pull-up;
+ };
+ };
+
+ sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+ <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
+ <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+ <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+ };
+ };
+
+ sdmmc2_b4_pins_a: sdmmc2-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
+ };
+ };
+
+ sdmmc2_b4_pins_b: sdmmc2-b4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_b4_od_pins_b: sdmmc2-b4-od-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-disable;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-disable;
+ };
+ };
+
+ sdmmc2_d47_pins_a: sdmmc2-d47-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
+ };
+ };
+
+ sdmmc3_b4_pins_a: sdmmc3-b4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('F', 1, AF9)>; /* SDMMC3_CMD */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc3_b4_od_pins_a: sdmmc3-b4-od-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, AF9)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+ slew-rate = <1>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+ slew-rate = <2>;
+ drive-push-pull;
+ bias-pull-up;
+ };
+ pins3 {
+ pinmux = <STM32_PINMUX('F', 1, AF9)>; /* SDMMC2_CMD */
+ slew-rate = <1>;
+ drive-open-drain;
+ bias-pull-up;
+ };
+ };
+
+ sdmmc3_b4_sleep_pins_a: sdmmc3-b4-sleep-0 {
+ pins {
+ pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('F', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('F', 1, ANALOG)>; /* SDMMC3_CMD */
+ };
+ };
+
+ spdifrx_pins_a: spdifrx-0 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
+ bias-disable;
+ };
+ };
+
+ spdifrx_sleep_pins_a: spdifrx-1 {
+ pins {
+ pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
+ };
+ };
+
+ spi2_pins_a: spi2-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
+ <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */
+ <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <3>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
+ bias-disable;
+ };
+ };
+
+ stusb1600_pins_a: stusb1600-0 {
+ pins {
+ pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
+ bias-pull-up;
+ };
+ };
+
+ uart4_pins_a: uart4-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart4_pins_b: uart4-1 {
+ pins1 {
+ pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ bias-disable;
+ };
+ };
+
+ uart7_pins_a: uart7-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
+ <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
+ <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
+ bias-disable;
+ };
+ };
+};
+
+&pinctrl_z {
+ i2c2_pins_b2: i2c2-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c2_pins_sleep_b2: i2c2-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
+ };
+ };
+
+ i2c4_pins_a: i2c4-0 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
+ bias-disable;
+ drive-open-drain;
+ slew-rate = <0>;
+ };
+ };
+
+ i2c4_pins_sleep_a: i2c4-1 {
+ pins {
+ pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
+ <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
+ };
+ };
+
+ spi1_pins_a: spi1-0 {
+ pins1 {
+ pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
+ <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <1>;
+ };
+
+ pins2 {
+ pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
+ bias-disable;
+ };
+ };
+};
similarity index 89%
rename from arch/arm/dts/stm32mp157c.dtsi
rename to arch/arm/dts/stm32mp151.dtsi
@@ -20,12 +20,6 @@
device_type = "cpu";
reg = <0>;
};
-
- cpu1: cpu at 1 {
- compatible = "arm,cortex-a7";
- device_type = "cpu";
- reg = <1>;
- };
};
psci {
@@ -155,6 +149,11 @@
reg = <1>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers3: timer at 40001000 {
@@ -184,6 +183,11 @@
reg = <2>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers4: timer at 40002000 {
@@ -211,6 +215,11 @@
reg = <3>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers5: timer at 40003000 {
@@ -240,6 +249,11 @@
reg = <4>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers6: timer at 40004000 {
@@ -596,6 +610,11 @@
reg = <0>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
timers8: timer at 44001000 {
@@ -627,6 +646,11 @@
reg = <7>;
status = "disabled";
};
+
+ counter {
+ compatible = "st,stm32-timer-counter";
+ status = "disabled";
+ };
};
usart6: serial at 44003000 {
@@ -930,33 +954,7 @@
};
};
- m_can1: can at 4400e000 {
- compatible = "bosch,m_can";
- reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
- status = "disabled";
- };
-
- m_can2: can at 4400f000 {
- compatible = "bosch,m_can";
- reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
- reg-names = "m_can", "message_ram";
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "int0", "int1";
- clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
- clock-names = "hclk", "cclk";
- bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
- status = "disabled";
- };
-
- dma1: dma at 48000000 {
+ dma1: dma-controller at 48000000 {
compatible = "st,stm32-dma";
reg = <0x48000000 0x400>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
@@ -973,7 +971,7 @@
dma-requests = <8>;
};
- dma2: dma at 48001000 {
+ dma2: dma-controller at 48001000 {
compatible = "st,stm32-dma";
reg = <0x48001000 0x400>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
@@ -1041,8 +1039,8 @@
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x10153180>;
reg = <0x48004000 0x400>;
- reg-names = "sdmmc";
- interrupts = <GIC_SPI 137 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC3_K>;
clock-names = "apb_pclk";
resets = <&rcc SDMMC3_R>;
@@ -1273,15 +1271,6 @@
status = "disabled";
};
- cryp1: cryp at 54001000 {
- compatible = "st,stm32mp1-cryp";
- reg = <0x54001000 0x400>;
- interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc CRYP1>;
- resets = <&rcc CRYP1_R>;
- status = "disabled";
- };
-
hash1: hash at 54002000 {
compatible = "st,stm32f756-hash";
reg = <0x54002000 0x400>;
@@ -1302,7 +1291,7 @@
status = "disabled";
};
- mdma1: dma at 58000000 {
+ mdma1: dma-controller at 58000000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>;
@@ -1349,20 +1338,22 @@
arm,primecell-periphid = <0x10153180>;
reg = <0x58005000 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
+ interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC1_K>;
clock-names = "apb_pclk";
resets = <&rcc SDMMC1_R>;
cap-sd-highspeed;
cap-mmc-highspeed;
max-frequency = <120000000>;
+ status = "disabled";
};
sdmmc2: sdmmc at 58007000 {
compatible = "arm,pl18x", "arm,primecell";
arm,primecell-periphid = <0x10153180>;
reg = <0x58007000 0x1000>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cmd_irq";
clocks = <&rcc SDMMC2_K>;
clock-names = "apb_pclk";
resets = <&rcc SDMMC2_R>;
@@ -1406,6 +1397,7 @@
st,syscon = <&syscfg 0x4>;
snps,mixed-burst;
snps,pbl = <2>;
+ snps,en-tx-lpi-clockgating;
snps,axi-config = <&stmmac_axi_config_0>;
snps,tso;
status = "disabled";
@@ -1430,26 +1422,6 @@
status = "disabled";
};
- gpu: gpu at 59000000 {
- compatible = "vivante,gc";
- reg = <0x59000000 0x800>;
- interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rcc GPU>, <&rcc GPU_K>;
- clock-names = "bus" ,"core";
- resets = <&rcc GPU_R>;
- status = "disabled";
- };
-
- dsi: dsi at 5a000000 {
- compatible = "st,stm32-dsi";
- reg = <0x5a000000 0x800>;
- clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
- clock-names = "pclk", "ref", "px_clk";
- resets = <&rcc DSI_R>;
- reset-names = "apb";
- status = "disabled";
- };
-
ltdc: display-controller at 5a001000 {
compatible = "st,stm32-ltdc";
reg = <0x5a001000 0x400>;
@@ -1535,7 +1507,7 @@
status = "disabled";
};
- bsec: nvmem at 5c005000 {
+ bsec: efuse at 5c005000 {
compatible = "st,stm32mp15-bsec";
reg = <0x5c005000 0x400>;
#address-cells = <1>;
@@ -1560,12 +1532,172 @@
#size-cells = <0>;
status = "disabled";
};
+
+ /*
+ * Break node order to solve dependency probe issue between
+ * pinctrl and exti.
+ */
+ pinctrl: pin-controller at 50002000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-pinctrl";
+ ranges = <0 0x50002000 0xa400>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ hwlocks = <&hwspinlock 0>;
+ pins-are-numbered;
+
+ gpioa: gpio at 50002000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc GPIOA>;
+ st,bank-name = "GPIOA";
+ status = "disabled";
+ };
+
+ gpiob: gpio at 50003000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc GPIOB>;
+ st,bank-name = "GPIOB";
+ status = "disabled";
+ };
+
+ gpioc: gpio at 50004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc GPIOC>;
+ st,bank-name = "GPIOC";
+ status = "disabled";
+ };
+
+ gpiod: gpio at 50005000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x3000 0x400>;
+ clocks = <&rcc GPIOD>;
+ st,bank-name = "GPIOD";
+ status = "disabled";
+ };
+
+ gpioe: gpio at 50006000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x4000 0x400>;
+ clocks = <&rcc GPIOE>;
+ st,bank-name = "GPIOE";
+ status = "disabled";
+ };
+
+ gpiof: gpio at 50007000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x5000 0x400>;
+ clocks = <&rcc GPIOF>;
+ st,bank-name = "GPIOF";
+ status = "disabled";
+ };
+
+ gpiog: gpio at 50008000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x6000 0x400>;
+ clocks = <&rcc GPIOG>;
+ st,bank-name = "GPIOG";
+ status = "disabled";
+ };
+
+ gpioh: gpio at 50009000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x7000 0x400>;
+ clocks = <&rcc GPIOH>;
+ st,bank-name = "GPIOH";
+ status = "disabled";
+ };
+
+ gpioi: gpio at 5000a000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x8000 0x400>;
+ clocks = <&rcc GPIOI>;
+ st,bank-name = "GPIOI";
+ status = "disabled";
+ };
+
+ gpioj: gpio at 5000b000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x9000 0x400>;
+ clocks = <&rcc GPIOJ>;
+ st,bank-name = "GPIOJ";
+ status = "disabled";
+ };
+
+ gpiok: gpio at 5000c000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0xa000 0x400>;
+ clocks = <&rcc GPIOK>;
+ st,bank-name = "GPIOK";
+ status = "disabled";
+ };
+ };
+
+ pinctrl_z: pin-controller-z at 54004000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32mp157-z-pinctrl";
+ ranges = <0 0x54004000 0x400>;
+ pins-are-numbered;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&exti 0x60 0xff>;
+ hwlocks = <&hwspinlock 0>;
+
+ gpioz: gpio at 54004000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0 0x400>;
+ clocks = <&rcc GPIOZ>;
+ st,bank-name = "GPIOZ";
+ st,bank-ioport = <11>;
+ status = "disabled";
+ };
+ };
};
- mlahb {
- compatible = "simple-bus";
+ mlahb: ahb {
+ compatible = "st,mlahb", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
+ ranges;
dma-ranges = <0x00000000 0x38000000 0x10000>,
<0x10000000 0x10000000 0x60000>,
<0x30000000 0x30000000 0x60000>;
new file mode 100644
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp151.dtsi"
+
+/ {
+ cpus {
+ cpu1: cpu at 1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ soc {
+ m_can1: can at 4400e000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400e000 0x400>, <0x44011000 0x1400>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+
+ m_can2: can at 4400f000 {
+ compatible = "bosch,m_can";
+ reg = <0x4400f000 0x400>, <0x44011000 0x2800>;
+ reg-names = "m_can", "message_ram";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
+ clock-names = "hclk", "cclk";
+ bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+ status = "disabled";
+ };
+ };
+};
deleted file mode 100644
@@ -1,1057 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2017 - All Rights Reserved
- * Author: Ludovic Barre <ludovic.barre at st.com> for STMicroelectronics.
- */
-#include <dt-bindings/pinctrl/stm32-pinfunc.h>
-
-/ {
- soc {
- pinctrl: pin-controller at 50002000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32mp157-pinctrl";
- ranges = <0 0x50002000 0xa400>;
- interrupt-parent = <&exti>;
- st,syscfg = <&exti 0x60 0xff>;
- hwlocks = <&hwspinlock 0>;
- pins-are-numbered;
-
- gpioa: gpio at 50002000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x0 0x400>;
- clocks = <&rcc GPIOA>;
- st,bank-name = "GPIOA";
- status = "disabled";
- };
-
- gpiob: gpio at 50003000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x1000 0x400>;
- clocks = <&rcc GPIOB>;
- st,bank-name = "GPIOB";
- status = "disabled";
- };
-
- gpioc: gpio at 50004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x2000 0x400>;
- clocks = <&rcc GPIOC>;
- st,bank-name = "GPIOC";
- status = "disabled";
- };
-
- gpiod: gpio at 50005000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x3000 0x400>;
- clocks = <&rcc GPIOD>;
- st,bank-name = "GPIOD";
- status = "disabled";
- };
-
- gpioe: gpio at 50006000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x4000 0x400>;
- clocks = <&rcc GPIOE>;
- st,bank-name = "GPIOE";
- status = "disabled";
- };
-
- gpiof: gpio at 50007000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x5000 0x400>;
- clocks = <&rcc GPIOF>;
- st,bank-name = "GPIOF";
- status = "disabled";
- };
-
- gpiog: gpio at 50008000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x6000 0x400>;
- clocks = <&rcc GPIOG>;
- st,bank-name = "GPIOG";
- status = "disabled";
- };
-
- gpioh: gpio at 50009000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x7000 0x400>;
- clocks = <&rcc GPIOH>;
- st,bank-name = "GPIOH";
- status = "disabled";
- };
-
- gpioi: gpio at 5000a000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x8000 0x400>;
- clocks = <&rcc GPIOI>;
- st,bank-name = "GPIOI";
- status = "disabled";
- };
-
- gpioj: gpio at 5000b000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0x9000 0x400>;
- clocks = <&rcc GPIOJ>;
- st,bank-name = "GPIOJ";
- status = "disabled";
- };
-
- gpiok: gpio at 5000c000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0xa000 0x400>;
- clocks = <&rcc GPIOK>;
- st,bank-name = "GPIOK";
- status = "disabled";
- };
-
- adc12_ain_pins_a: adc12-ain-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 3, ANALOG)>, /* ADC1 in13 */
- <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
- <STM32_PINMUX('F', 13, ANALOG)>, /* ADC2 in2 */
- <STM32_PINMUX('F', 14, ANALOG)>; /* ADC2 in6 */
- };
- };
-
- adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
- <STM32_PINMUX('A', 5, ANALOG)>; /* ADC12 in19 */
- };
- };
-
- cec_pins_a: cec-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 15, AF4)>;
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- cec_pins_sleep_a: cec-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
- };
- };
-
- cec_pins_b: cec-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 6, AF5)>;
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- cec_pins_sleep_b: cec-sleep-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
- };
- };
-
- dac_ch1_pins_a: dac-ch1 {
- pins {
- pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
- };
- };
-
- dac_ch2_pins_a: dac-ch2 {
- pins {
- pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
- };
- };
-
- dcmi_pins_a: dcmi-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */
- <STM32_PINMUX('B', 7, AF13)>,/* DCMI_VSYNC */
- <STM32_PINMUX('A', 6, AF13)>,/* DCMI_PIXCLK */
- <STM32_PINMUX('H', 9, AF13)>,/* DCMI_D0 */
- <STM32_PINMUX('H', 10, AF13)>,/* DCMI_D1 */
- <STM32_PINMUX('H', 11, AF13)>,/* DCMI_D2 */
- <STM32_PINMUX('H', 12, AF13)>,/* DCMI_D3 */
- <STM32_PINMUX('H', 14, AF13)>,/* DCMI_D4 */
- <STM32_PINMUX('I', 4, AF13)>,/* DCMI_D5 */
- <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */
- <STM32_PINMUX('E', 6, AF13)>,/* DCMI_D7 */
- <STM32_PINMUX('I', 1, AF13)>,/* DCMI_D8 */
- <STM32_PINMUX('H', 7, AF13)>,/* DCMI_D9 */
- <STM32_PINMUX('I', 3, AF13)>,/* DCMI_D10 */
- <STM32_PINMUX('H', 15, AF13)>;/* DCMI_D11 */
- bias-disable;
- };
- };
-
- dcmi_sleep_pins_a: dcmi-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */
- <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_VSYNC */
- <STM32_PINMUX('A', 6, ANALOG)>,/* DCMI_PIXCLK */
- <STM32_PINMUX('H', 9, ANALOG)>,/* DCMI_D0 */
- <STM32_PINMUX('H', 10, ANALOG)>,/* DCMI_D1 */
- <STM32_PINMUX('H', 11, ANALOG)>,/* DCMI_D2 */
- <STM32_PINMUX('H', 12, ANALOG)>,/* DCMI_D3 */
- <STM32_PINMUX('H', 14, ANALOG)>,/* DCMI_D4 */
- <STM32_PINMUX('I', 4, ANALOG)>,/* DCMI_D5 */
- <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */
- <STM32_PINMUX('E', 6, ANALOG)>,/* DCMI_D7 */
- <STM32_PINMUX('I', 1, ANALOG)>,/* DCMI_D8 */
- <STM32_PINMUX('H', 7, ANALOG)>,/* DCMI_D9 */
- <STM32_PINMUX('I', 3, ANALOG)>,/* DCMI_D10 */
- <STM32_PINMUX('H', 15, ANALOG)>;/* DCMI_D11 */
- };
- };
-
- ethernet0_rgmii_pins_a: rgmii-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
- <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
- <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
- bias-disable;
- drive-push-pull;
- slew-rate = <2>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins3 {
- pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
- <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
- <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
- <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
- bias-disable;
- };
- };
-
- ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
- <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
- <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
- <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
- <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
- <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
- <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
- <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
- <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
- <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
- <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
- <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD2 */
- <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
- <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
- <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
- };
- };
-
- fmc_pins_a: fmc-0 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 4, AF12)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, AF12)>, /* FMC_NWE */
- <STM32_PINMUX('D', 11, AF12)>, /* FMC_A16_FMC_CLE */
- <STM32_PINMUX('D', 12, AF12)>, /* FMC_A17_FMC_ALE */
- <STM32_PINMUX('D', 14, AF12)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, AF12)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, AF12)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, AF12)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, AF12)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, AF12)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, AF12)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, AF12)>, /* FMC_D7 */
- <STM32_PINMUX('G', 9, AF12)>; /* FMC_NE2_FMC_NCE */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('D', 6, AF12)>; /* FMC_NWAIT */
- bias-pull-up;
- };
- };
-
- fmc_sleep_pins_a: fmc-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('D', 4, ANALOG)>, /* FMC_NOE */
- <STM32_PINMUX('D', 5, ANALOG)>, /* FMC_NWE */
- <STM32_PINMUX('D', 11, ANALOG)>, /* FMC_A16_FMC_CLE */
- <STM32_PINMUX('D', 12, ANALOG)>, /* FMC_A17_FMC_ALE */
- <STM32_PINMUX('D', 14, ANALOG)>, /* FMC_D0 */
- <STM32_PINMUX('D', 15, ANALOG)>, /* FMC_D1 */
- <STM32_PINMUX('D', 0, ANALOG)>, /* FMC_D2 */
- <STM32_PINMUX('D', 1, ANALOG)>, /* FMC_D3 */
- <STM32_PINMUX('E', 7, ANALOG)>, /* FMC_D4 */
- <STM32_PINMUX('E', 8, ANALOG)>, /* FMC_D5 */
- <STM32_PINMUX('E', 9, ANALOG)>, /* FMC_D6 */
- <STM32_PINMUX('E', 10, ANALOG)>, /* FMC_D7 */
- <STM32_PINMUX('D', 6, ANALOG)>, /* FMC_NWAIT */
- <STM32_PINMUX('G', 9, ANALOG)>; /* FMC_NE2_FMC_NCE */
- };
- };
-
- i2c1_pins_a: i2c1-0 {
- pins {
- pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c1_pins_sleep_a: i2c1-1 {
- pins {
- pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
- };
- };
-
- i2c1_pins_b: i2c1-2 {
- pins {
- pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c1_pins_sleep_b: i2c1-3 {
- pins {
- pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
- <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
- };
- };
-
- i2c2_pins_a: i2c2-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 4, AF4)>, /* I2C2_SCL */
- <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c2_pins_sleep_a: i2c2-1 {
- pins {
- pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
- <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
- };
- };
-
- i2c2_pins_b1: i2c2-2 {
- pins {
- pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c2_pins_sleep_b1: i2c2-3 {
- pins {
- pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
- };
- };
-
- i2c5_pins_a: i2c5-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
- <STM32_PINMUX('A', 12, AF4)>; /* I2C5_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c5_pins_sleep_a: i2c5-1 {
- pins {
- pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
- <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
-
- };
- };
-
- i2s2_pins_a: i2s2-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
- <STM32_PINMUX('B', 9, AF5)>, /* I2S2_WS */
- <STM32_PINMUX('A', 9, AF5)>; /* I2S2_CK */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- i2s2_pins_sleep_a: i2s2-1 {
- pins {
- pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
- <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
- <STM32_PINMUX('A', 9, ANALOG)>; /* I2S2_CK */
- };
- };
-
- ltdc_pins_a: ltdc-a-0 {
- pins {
- pinmux = <STM32_PINMUX('G', 7, AF14)>, /* LCD_CLK */
- <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 9, AF14)>, /* LCD_VSYNC */
- <STM32_PINMUX('F', 10, AF14)>, /* LCD_DE */
- <STM32_PINMUX('H', 2, AF14)>, /* LCD_R0 */
- <STM32_PINMUX('H', 3, AF14)>, /* LCD_R1 */
- <STM32_PINMUX('H', 8, AF14)>, /* LCD_R2 */
- <STM32_PINMUX('H', 9, AF14)>, /* LCD_R3 */
- <STM32_PINMUX('H', 10, AF14)>, /* LCD_R4 */
- <STM32_PINMUX('C', 0, AF14)>, /* LCD_R5 */
- <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
- <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
- <STM32_PINMUX('E', 5, AF14)>, /* LCD_G0 */
- <STM32_PINMUX('E', 6, AF14)>, /* LCD_G1 */
- <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
- <STM32_PINMUX('H', 14, AF14)>, /* LCD_G3 */
- <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
- <STM32_PINMUX('I', 0, AF14)>, /* LCD_G5 */
- <STM32_PINMUX('I', 1, AF14)>, /* LCD_G6 */
- <STM32_PINMUX('I', 2, AF14)>, /* LCD_G7 */
- <STM32_PINMUX('D', 9, AF14)>, /* LCD_B0 */
- <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
- <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
- <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
- <STM32_PINMUX('I', 4, AF14)>, /* LCD_B4 */
- <STM32_PINMUX('A', 3, AF14)>, /* LCD_B5 */
- <STM32_PINMUX('B', 8, AF14)>, /* LCD_B6 */
- <STM32_PINMUX('D', 8, AF14)>; /* LCD_B7 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- ltdc_pins_sleep_a: ltdc-a-1 {
- pins {
- pinmux = <STM32_PINMUX('G', 7, ANALOG)>, /* LCD_CLK */
- <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 9, ANALOG)>, /* LCD_VSYNC */
- <STM32_PINMUX('F', 10, ANALOG)>, /* LCD_DE */
- <STM32_PINMUX('H', 2, ANALOG)>, /* LCD_R0 */
- <STM32_PINMUX('H', 3, ANALOG)>, /* LCD_R1 */
- <STM32_PINMUX('H', 8, ANALOG)>, /* LCD_R2 */
- <STM32_PINMUX('H', 9, ANALOG)>, /* LCD_R3 */
- <STM32_PINMUX('H', 10, ANALOG)>, /* LCD_R4 */
- <STM32_PINMUX('C', 0, ANALOG)>, /* LCD_R5 */
- <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
- <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
- <STM32_PINMUX('E', 5, ANALOG)>, /* LCD_G0 */
- <STM32_PINMUX('E', 6, ANALOG)>, /* LCD_G1 */
- <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
- <STM32_PINMUX('H', 14, ANALOG)>, /* LCD_G3 */
- <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
- <STM32_PINMUX('I', 0, ANALOG)>, /* LCD_G5 */
- <STM32_PINMUX('I', 1, ANALOG)>, /* LCD_G6 */
- <STM32_PINMUX('I', 2, ANALOG)>, /* LCD_G7 */
- <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_B0 */
- <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
- <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
- <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
- <STM32_PINMUX('I', 4, ANALOG)>, /* LCD_B4 */
- <STM32_PINMUX('A', 3, ANALOG)>, /* LCD_B5 */
- <STM32_PINMUX('B', 8, ANALOG)>, /* LCD_B6 */
- <STM32_PINMUX('D', 8, ANALOG)>; /* LCD_B7 */
- };
- };
-
- ltdc_pins_b: ltdc-b-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
- <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 13, AF14)>, /* LCD_VSYNC */
- <STM32_PINMUX('K', 7, AF14)>, /* LCD_DE */
- <STM32_PINMUX('I', 15, AF14)>, /* LCD_R0 */
- <STM32_PINMUX('J', 0, AF14)>, /* LCD_R1 */
- <STM32_PINMUX('J', 1, AF14)>, /* LCD_R2 */
- <STM32_PINMUX('J', 2, AF14)>, /* LCD_R3 */
- <STM32_PINMUX('J', 3, AF14)>, /* LCD_R4 */
- <STM32_PINMUX('J', 4, AF14)>, /* LCD_R5 */
- <STM32_PINMUX('J', 5, AF14)>, /* LCD_R6 */
- <STM32_PINMUX('J', 6, AF14)>, /* LCD_R7 */
- <STM32_PINMUX('J', 7, AF14)>, /* LCD_G0 */
- <STM32_PINMUX('J', 8, AF14)>, /* LCD_G1 */
- <STM32_PINMUX('J', 9, AF14)>, /* LCD_G2 */
- <STM32_PINMUX('J', 10, AF14)>, /* LCD_G3 */
- <STM32_PINMUX('J', 11, AF14)>, /* LCD_G4 */
- <STM32_PINMUX('K', 0, AF14)>, /* LCD_G5 */
- <STM32_PINMUX('K', 1, AF14)>, /* LCD_G6 */
- <STM32_PINMUX('K', 2, AF14)>, /* LCD_G7 */
- <STM32_PINMUX('J', 12, AF14)>, /* LCD_B0 */
- <STM32_PINMUX('J', 13, AF14)>, /* LCD_B1 */
- <STM32_PINMUX('J', 14, AF14)>, /* LCD_B2 */
- <STM32_PINMUX('J', 15, AF14)>, /* LCD_B3 */
- <STM32_PINMUX('K', 3, AF14)>, /* LCD_B4 */
- <STM32_PINMUX('K', 4, AF14)>, /* LCD_B5 */
- <STM32_PINMUX('K', 5, AF14)>, /* LCD_B6 */
- <STM32_PINMUX('K', 6, AF14)>; /* LCD_B7 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- ltdc_pins_sleep_b: ltdc-b-1 {
- pins {
- pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
- <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
- <STM32_PINMUX('I', 13, ANALOG)>, /* LCD_VSYNC */
- <STM32_PINMUX('K', 7, ANALOG)>, /* LCD_DE */
- <STM32_PINMUX('I', 15, ANALOG)>, /* LCD_R0 */
- <STM32_PINMUX('J', 0, ANALOG)>, /* LCD_R1 */
- <STM32_PINMUX('J', 1, ANALOG)>, /* LCD_R2 */
- <STM32_PINMUX('J', 2, ANALOG)>, /* LCD_R3 */
- <STM32_PINMUX('J', 3, ANALOG)>, /* LCD_R4 */
- <STM32_PINMUX('J', 4, ANALOG)>, /* LCD_R5 */
- <STM32_PINMUX('J', 5, ANALOG)>, /* LCD_R6 */
- <STM32_PINMUX('J', 6, ANALOG)>, /* LCD_R7 */
- <STM32_PINMUX('J', 7, ANALOG)>, /* LCD_G0 */
- <STM32_PINMUX('J', 8, ANALOG)>, /* LCD_G1 */
- <STM32_PINMUX('J', 9, ANALOG)>, /* LCD_G2 */
- <STM32_PINMUX('J', 10, ANALOG)>, /* LCD_G3 */
- <STM32_PINMUX('J', 11, ANALOG)>, /* LCD_G4 */
- <STM32_PINMUX('K', 0, ANALOG)>, /* LCD_G5 */
- <STM32_PINMUX('K', 1, ANALOG)>, /* LCD_G6 */
- <STM32_PINMUX('K', 2, ANALOG)>, /* LCD_G7 */
- <STM32_PINMUX('J', 12, ANALOG)>, /* LCD_B0 */
- <STM32_PINMUX('J', 13, ANALOG)>, /* LCD_B1 */
- <STM32_PINMUX('J', 14, ANALOG)>, /* LCD_B2 */
- <STM32_PINMUX('J', 15, ANALOG)>, /* LCD_B3 */
- <STM32_PINMUX('K', 3, ANALOG)>, /* LCD_B4 */
- <STM32_PINMUX('K', 4, ANALOG)>, /* LCD_B5 */
- <STM32_PINMUX('K', 5, ANALOG)>, /* LCD_B6 */
- <STM32_PINMUX('K', 6, ANALOG)>; /* LCD_B7 */
- };
- };
-
- m_can1_pins_a: m-can1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
- slew-rate = <1>;
- drive-push-pull;
- bias-disable;
- };
- pins2 {
- pinmux = <STM32_PINMUX('I', 9, AF9)>; /* CAN1_RX */
- bias-disable;
- };
- };
-
- m_can1_sleep_pins_a: m_can1-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* CAN1_TX */
- <STM32_PINMUX('I', 9, ANALOG)>; /* CAN1_RX */
- };
- };
-
- pwm2_pins_a: pwm2-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 3, AF1)>; /* TIM2_CH4 */
- bias-pull-down;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- pwm8_pins_a: pwm8-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
- bias-pull-down;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- pwm12_pins_a: pwm12-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 6, AF2)>; /* TIM12_CH1 */
- bias-pull-down;
- drive-push-pull;
- slew-rate = <0>;
- };
- };
-
- qspi_clk_pins_a: qspi-clk-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- };
-
- qspi_clk_sleep_pins_a: qspi-clk-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */
- };
- };
-
- qspi_bk1_pins_a: qspi-bk1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */
- <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */
- <STM32_PINMUX('F', 7, AF9)>, /* QSPI_BK1_IO2 */
- <STM32_PINMUX('F', 6, AF9)>; /* QSPI_BK1_IO3 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 6, AF10)>; /* QSPI_BK1_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */
- <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */
- <STM32_PINMUX('F', 7, ANALOG)>, /* QSPI_BK1_IO2 */
- <STM32_PINMUX('F', 6, ANALOG)>, /* QSPI_BK1_IO3 */
- <STM32_PINMUX('B', 6, ANALOG)>; /* QSPI_BK1_NCS */
- };
- };
-
- qspi_bk2_pins_a: qspi-bk2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('H', 2, AF9)>, /* QSPI_BK2_IO0 */
- <STM32_PINMUX('H', 3, AF9)>, /* QSPI_BK2_IO1 */
- <STM32_PINMUX('G', 10, AF11)>, /* QSPI_BK2_IO2 */
- <STM32_PINMUX('G', 7, AF11)>; /* QSPI_BK2_IO3 */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 0, AF10)>; /* QSPI_BK2_NCS */
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
- };
-
- qspi_bk2_sleep_pins_a: qspi-bk2-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* QSPI_BK2_IO0 */
- <STM32_PINMUX('H', 3, ANALOG)>, /* QSPI_BK2_IO1 */
- <STM32_PINMUX('G', 10, ANALOG)>, /* QSPI_BK2_IO2 */
- <STM32_PINMUX('G', 7, ANALOG)>, /* QSPI_BK2_IO3 */
- <STM32_PINMUX('C', 0, ANALOG)>; /* QSPI_BK2_NCS */
- };
- };
-
- sai2a_pins_a: sai2a-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 5, AF10)>, /* SAI2_SCK_A */
- <STM32_PINMUX('I', 6, AF10)>, /* SAI2_SD_A */
- <STM32_PINMUX('I', 7, AF10)>, /* SAI2_FS_A */
- <STM32_PINMUX('E', 0, AF10)>; /* SAI2_MCLK_A */
- slew-rate = <0>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sai2a_sleep_pins_a: sai2a-1 {
- pins {
- pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
- <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
- <STM32_PINMUX('I', 7, ANALOG)>, /* SAI2_FS_A */
- <STM32_PINMUX('E', 0, ANALOG)>; /* SAI2_MCLK_A */
- };
- };
-
- sai2b_pins_a: sai2b-0 {
- pins1 {
- pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
- <STM32_PINMUX('E', 13, AF10)>, /* SAI2_FS_B */
- <STM32_PINMUX('E', 14, AF10)>; /* SAI2_MCLK_B */
- slew-rate = <0>;
- drive-push-pull;
- bias-disable;
- };
- pins2 {
- pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
- bias-disable;
- };
- };
-
- sai2b_sleep_pins_a: sai2b-1 {
- pins {
- pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
- <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
- <STM32_PINMUX('E', 13, ANALOG)>, /* SAI2_FS_B */
- <STM32_PINMUX('E', 14, ANALOG)>; /* SAI2_MCLK_B */
- };
- };
-
- sai2b_pins_b: sai2b-2 {
- pins {
- pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
- bias-disable;
- };
- };
-
- sai2b_sleep_pins_b: sai2b-3 {
- pins {
- pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
- };
- };
-
- sai4a_pins_a: sai4a-0 {
- pins {
- pinmux = <STM32_PINMUX('B', 5, AF10)>; /* SAI4_SD_A */
- slew-rate = <0>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sai4a_sleep_pins_a: sai4a-1 {
- pins {
- pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
- };
- };
-
- sdmmc1_b4_pins_a: sdmmc1-b4-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- };
-
- sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 {
- pins1 {
- pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, AF12)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, AF12)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, AF12)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */
- slew-rate = <3>;
- drive-push-pull;
- bias-disable;
- };
- pins2{
- pinmux = <STM32_PINMUX('D', 2, AF12)>; /* SDMMC1_CMD */
- slew-rate = <3>;
- drive-open-drain;
- bias-disable;
- };
- };
-
- sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */
- <STM32_PINMUX('C', 9, ANALOG)>, /* SDMMC1_D1 */
- <STM32_PINMUX('C', 10, ANALOG)>, /* SDMMC1_D2 */
- <STM32_PINMUX('C', 11, ANALOG)>, /* SDMMC1_D3 */
- <STM32_PINMUX('C', 12, ANALOG)>, /* SDMMC1_CK */
- <STM32_PINMUX('D', 2, ANALOG)>; /* SDMMC1_CMD */
- };
- };
-
- sdmmc1_dir_pins_a: sdmmc1-dir-0 {
- pins1 {
- pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, AF8)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
- slew-rate = <3>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2{
- pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
- bias-pull-up;
- };
- };
-
- sdmmc1_dir_sleep_pins_a: sdmmc1-dir-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
- <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC1_D123DIR */
- <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
- <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
- };
- };
-
- sdmmc2_b4_pins_a: sdmmc2-b4-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
- <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- slew-rate = <1>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
- slew-rate = <2>;
- drive-push-pull;
- bias-pull-up;
- };
- };
-
- sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 15, AF9)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
- slew-rate = <1>;
- drive-push-pull;
- bias-pull-up;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */
- slew-rate = <2>;
- drive-push-pull;
- bias-pull-up;
- };
- pins3 {
- pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- slew-rate = <1>;
- drive-open-drain;
- bias-pull-up;
- };
- };
-
- sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 15, ANALOG)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
- <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
- <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
- };
- };
-
- sdmmc2_d47_pins_a: sdmmc2-d47-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('E', 5, AF9)>, /* SDMMC2_D6 */
- <STM32_PINMUX('D', 3, AF9)>; /* SDMMC2_D7 */
- slew-rate = <1>;
- drive-push-pull;
- bias-pull-up;
- };
- };
-
- sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 {
- pins {
- pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
- <STM32_PINMUX('E', 5, ANALOG)>, /* SDMMC2_D6 */
- <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
- };
- };
-
- spdifrx_pins_a: spdifrx-0 {
- pins {
- pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
- bias-disable;
- };
- };
-
- spdifrx_sleep_pins_a: spdifrx-1 {
- pins {
- pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
- };
- };
-
- spi2_pins_a: spi2-0 {
- pins1 {
- pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */
- <STM32_PINMUX('I', 0, AF5)>, /* SPI2_NSS */
- <STM32_PINMUX('I', 3, AF5)>; /* SPI2_MOSI */
- bias-disable;
- drive-push-pull;
- slew-rate = <3>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI2_MISO */
- bias-disable;
- };
- };
-
- stusb1600_pins_a: stusb1600-0 {
- pins {
- pinmux = <STM32_PINMUX('I', 11, ANALOG)>;
- bias-pull-up;
- };
- };
-
- uart4_pins_a: uart4-0 {
- pins1 {
- pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- uart4_pins_b: uart4-1 {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF8)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-disable;
- };
- };
-
- uart7_pins_a: uart7-0 {
- pins1 {
- pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART4_RX */
- <STM32_PINMUX('E', 10, AF7)>, /* UART4_CTS */
- <STM32_PINMUX('E', 9, AF7)>; /* UART4_RTS */
- bias-disable;
- };
- };
- };
-
- pinctrl_z: pin-controller-z at 54004000 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "st,stm32mp157-z-pinctrl";
- ranges = <0 0x54004000 0x400>;
- pins-are-numbered;
- interrupt-parent = <&exti>;
- st,syscfg = <&exti 0x60 0xff>;
- hwlocks = <&hwspinlock 0>;
-
- gpioz: gpio at 54004000 {
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- reg = <0 0x400>;
- clocks = <&rcc GPIOZ>;
- st,bank-name = "GPIOZ";
- st,bank-ioport = <11>;
- status = "disabled";
- };
-
- i2c2_pins_b2: i2c2-0 {
- pins {
- pinmux = <STM32_PINMUX('Z', 0, AF3)>; /* I2C2_SCL */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c2_pins_sleep_b2: i2c2-1 {
- pins {
- pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
- };
- };
-
- i2c4_pins_a: i2c4-0 {
- pins {
- pinmux = <STM32_PINMUX('Z', 4, AF6)>, /* I2C4_SCL */
- <STM32_PINMUX('Z', 5, AF6)>; /* I2C4_SDA */
- bias-disable;
- drive-open-drain;
- slew-rate = <0>;
- };
- };
-
- i2c4_pins_sleep_a: i2c4-1 {
- pins {
- pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
- <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
- };
- };
-
- spi1_pins_a: spi1-0 {
- pins1 {
- pinmux = <STM32_PINMUX('Z', 0, AF5)>, /* SPI1_SCK */
- <STM32_PINMUX('Z', 2, AF5)>; /* SPI1_MOSI */
- bias-disable;
- drive-push-pull;
- slew-rate = <1>;
- };
-
- pins2 {
- pinmux = <STM32_PINMUX('Z', 1, AF5)>; /* SPI1_MISO */
- bias-disable;
- };
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+#include "stm32mp153.dtsi"
+
+/ {
+ soc {
+ gpu: gpu at 59000000 {
+ compatible = "vivante,gc";
+ reg = <0x59000000 0x800>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc GPU>, <&rcc GPU_K>;
+ clock-names = "bus" ,"core";
+ resets = <&rcc GPU_R>;
+ status = "disabled";
+ };
+
+ dsi: dsi at 5a000000 {
+ compatible = "st,stm32-dsi";
+ reg = <0x5a000000 0x800>;
+ clocks = <&rcc DSI_K>, <&clk_hse>, <&rcc DSI_PX>;
+ clock-names = "pclk", "ref", "px_clk";
+ resets = <&rcc DSI_R>;
+ reset-names = "apb";
+ status = "disabled";
+ };
+ };
+};
@@ -145,7 +145,10 @@
&sdmmc1_b4_pins_a {
u-boot,dm-spl;
- pins {
+ pins1 {
+ u-boot,dm-spl;
+ };
+ pins2 {
u-boot,dm-spl;
};
};
@@ -196,7 +199,3 @@
u-boot,force-b-session-valid;
hnp-srp-disable;
};
-
-&v3v3 {
- regulator-always-on;
-};
@@ -6,8 +6,9 @@
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
@@ -164,7 +164,10 @@
&sdmmc1_b4_pins_a {
u-boot,dm-spl;
- pins {
+ pins1 {
+ u-boot,dm-spl;
+ };
+ pins2 {
u-boot,dm-spl;
};
};
@@ -6,10 +6,10 @@
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157A-DK1 Discovery Board";
@@ -23,537 +23,4 @@
chosen {
stdout-path = "serial0:115200n8";
};
-
- memory at c0000000 {
- device_type = "memory";
- reg = <0xc0000000 0x20000000>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- mcuram2: mcuram2 at 10000000 {
- compatible = "shared-dma-pool";
- reg = <0x10000000 0x40000>;
- no-map;
- };
-
- vdev0vring0: vdev0vring0 at 10040000 {
- compatible = "shared-dma-pool";
- reg = <0x10040000 0x1000>;
- no-map;
- };
-
- vdev0vring1: vdev0vring1 at 10041000 {
- compatible = "shared-dma-pool";
- reg = <0x10041000 0x1000>;
- no-map;
- };
-
- vdev0buffer: vdev0buffer at 10042000 {
- compatible = "shared-dma-pool";
- reg = <0x10042000 0x4000>;
- no-map;
- };
-
- mcuram: mcuram at 30000000 {
- compatible = "shared-dma-pool";
- reg = <0x30000000 0x40000>;
- no-map;
- };
-
- retram: retram at 38000000 {
- compatible = "shared-dma-pool";
- reg = <0x38000000 0x10000>;
- no-map;
- };
-
- gpu_reserved: gpu at d4000000 {
- reg = <0xd4000000 0x4000000>;
- no-map;
- };
- };
-
- led {
- compatible = "gpio-leds";
- blue {
- label = "heartbeat";
- gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- default-state = "off";
- };
- };
-
- sound {
- compatible = "audio-graph-card";
- label = "STM32MP1-DK";
- routing =
- "Playback" , "MCLK",
- "Capture" , "MCLK",
- "MICL" , "Mic Bias";
- dais = <&sai2a_port &sai2b_port &i2s2_port>;
- status = "okay";
- };
-};
-
-&adc {
- pinctrl-names = "default";
- pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
- vdd-supply = <&vdd>;
- vdda-supply = <&vdd>;
- vref-supply = <&vrefbuf>;
- status = "disabled";
- adc1: adc at 0 {
- /*
- * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
- * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
- * 5 * (56 + 47kOhms) * 5pF => 2.5us.
- * Use arbitrary margin here (e.g. 5us).
- */
- st,min-sample-time-nsecs = <5000>;
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 6 13 18 19>;
- status = "okay";
- };
- adc2: adc at 100 {
- /* AIN connector, USB Type-C CC1 & CC2 */
- st,adc-channels = <0 1 2 6 18 19>;
- st,min-sample-time-nsecs = <5000>;
- status = "okay";
- };
-};
-
-&cec {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&cec_pins_b>;
- pinctrl-1 = <&cec_pins_sleep_b>;
- status = "okay";
-};
-
-ðernet0 {
- status = "okay";
- pinctrl-0 = <ðernet0_rgmii_pins_a>;
- pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
- pinctrl-names = "default", "sleep";
- phy-mode = "rgmii-id";
- max-speed = <1000>;
- phy-handle = <&phy0>;
-
- mdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "snps,dwmac-mdio";
- phy0: ethernet-phy at 0 {
- reg = <0>;
- };
- };
-};
-
-&gpu {
- contiguous-area = <&gpu_reserved>;
- status = "okay";
-};
-
-&i2c1 {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2c1_pins_a>;
- pinctrl-1 = <&i2c1_pins_sleep_a>;
- i2c-scl-rising-time-ns = <100>;
- i2c-scl-falling-time-ns = <7>;
- status = "okay";
- /delete-property/dmas;
- /delete-property/dma-names;
-
- hdmi-transmitter at 39 {
- compatible = "sil,sii9022";
- reg = <0x39>;
- iovcc-supply = <&v3v3_hdmi>;
- cvcc12-supply = <&v1v2_hdmi>;
- reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
- interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpiog>;
- #sound-dai-cells = <0>;
- status = "okay";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port at 0 {
- reg = <0>;
- sii9022_in: endpoint {
- remote-endpoint = <<dc_ep0_out>;
- };
- };
-
- port at 3 {
- reg = <3>;
- sii9022_tx_endpoint: endpoint {
- remote-endpoint = <&i2s2_endpoint>;
- };
- };
- };
- };
-
- cs42l51: cs42l51 at 4a {
- compatible = "cirrus,cs42l51";
- reg = <0x4a>;
- #sound-dai-cells = <0>;
- VL-supply = <&v3v3>;
- VD-supply = <&v1v8_audio>;
- VA-supply = <&v1v8_audio>;
- VAHP-supply = <&v1v8_audio>;
- reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
- clocks = <&sai2a>;
- clock-names = "MCLK";
- status = "okay";
-
- cs42l51_port: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cs42l51_tx_endpoint: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&sai2a_endpoint>;
- frame-master;
- bitclock-master;
- };
-
- cs42l51_rx_endpoint: endpoint at 1 {
- reg = <1>;
- remote-endpoint = <&sai2b_endpoint>;
- frame-master;
- bitclock-master;
- };
- };
- };
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins_a>;
- i2c-scl-rising-time-ns = <185>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
- /* spare dmas for other usage */
- /delete-property/dmas;
- /delete-property/dma-names;
-
- typec: stusb1600 at 28 {
- compatible = "st,stusb1600";
- reg = <0x28>;
- interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
- interrupt-parent = <&gpioi>;
- pinctrl-names = "default";
- pinctrl-0 = <&stusb1600_pins_a>;
-
- status = "okay";
-
- typec_con: connector {
- compatible = "usb-c-connector";
- label = "USB-C";
- power-role = "sink";
- power-opmode = "default";
- };
- };
-
- pmic: stpmic at 33 {
- compatible = "st,stpmic1";
- reg = <0x33>;
- interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
- interrupt-controller;
- #interrupt-cells = <2>;
- status = "okay";
-
- regulators {
- compatible = "st,stpmic1-regulators";
- ldo1-supply = <&v3v3>;
- ldo3-supply = <&vdd_ddr>;
- ldo6-supply = <&v3v3>;
- pwr_sw1-supply = <&bst_out>;
- pwr_sw2-supply = <&bst_out>;
-
- vddcore: buck1 {
- regulator-name = "vddcore";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd_ddr: buck2 {
- regulator-name = "vdd_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- vdd: buck3 {
- regulator-name = "vdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- st,mask-reset;
- regulator-initial-mode = <0>;
- regulator-over-current-protection;
- };
-
- v3v3: buck4 {
- regulator-name = "v3v3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-over-current-protection;
- regulator-initial-mode = <0>;
- };
-
- v1v8_audio: ldo1 {
- regulator-name = "v1v8_audio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO1 0>;
- };
-
- v3v3_hdmi: ldo2 {
- regulator-name = "v3v3_hdmi";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO2 0>;
- };
-
- vtt_ddr: ldo3 {
- regulator-name = "vtt_ddr";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <750000>;
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- vdd_usb: ldo4 {
- regulator-name = "vdd_usb";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- interrupts = <IT_CURLIM_LDO4 0>;
- };
-
- vdda: ldo5 {
- regulator-name = "vdda";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- interrupts = <IT_CURLIM_LDO5 0>;
- regulator-boot-on;
- };
-
- v1v2_hdmi: ldo6 {
- regulator-name = "v1v2_hdmi";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- interrupts = <IT_CURLIM_LDO6 0>;
- };
-
- vref_ddr: vref_ddr {
- regulator-name = "vref_ddr";
- regulator-always-on;
- regulator-over-current-protection;
- };
-
- bst_out: boost {
- regulator-name = "bst_out";
- interrupts = <IT_OCP_BOOST 0>;
- };
-
- vbus_otg: pwr_sw1 {
- regulator-name = "vbus_otg";
- interrupts = <IT_OCP_OTG 0>;
- };
-
- vbus_sw: pwr_sw2 {
- regulator-name = "vbus_sw";
- interrupts = <IT_OCP_SWOUT 0>;
- regulator-active-discharge = <1>;
- };
- };
-
- onkey {
- compatible = "st,stpmic1-onkey";
- interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
- interrupt-names = "onkey-falling", "onkey-rising";
- power-off-time-sec = <10>;
- status = "okay";
- };
-
- watchdog {
- compatible = "st,stpmic1-wdt";
- status = "disabled";
- };
- };
-};
-
-&i2s2 {
- clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "i2sclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&i2s2_pins_a>;
- pinctrl-1 = <&i2s2_pins_sleep_a>;
- status = "okay";
-
- i2s2_port: port {
- i2s2_endpoint: endpoint {
- remote-endpoint = <&sii9022_tx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- };
- };
-};
-
-&ipcc {
- status = "okay";
-};
-
-&iwdg2 {
- timeout-sec = <32>;
- status = "okay";
-};
-
-<dc {
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <<dc_pins_a>;
- pinctrl-1 = <<dc_pins_sleep_a>;
- status = "okay";
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ltdc_ep0_out: endpoint at 0 {
- reg = <0>;
- remote-endpoint = <&sii9022_in>;
- };
- };
-};
-
-&m4_rproc {
- memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
- <&vdev0vring1>, <&vdev0buffer>;
- mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
- mbox-names = "vq0", "vq1", "shutdown";
- interrupt-parent = <&exti>;
- interrupts = <68 1>;
- status = "okay";
-};
-
-&pwr_regulators {
- vdd-supply = <&vdd>;
- vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
- status = "okay";
-};
-
-&rtc {
- status = "okay";
-};
-
-&sai2 {
- clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
- clock-names = "pclk", "x8k", "x11k";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
- pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
- status = "okay";
-
- sai2a: audio-controller at 4400b004 {
- #clock-cells = <0>;
- dma-names = "tx";
- clocks = <&rcc SAI2_K>;
- clock-names = "sai_ck";
- status = "okay";
-
- sai2a_port: port {
- sai2a_endpoint: endpoint {
- remote-endpoint = <&cs42l51_tx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
- };
- };
-
- sai2b: audio-controller at 4400b024 {
- dma-names = "rx";
- st,sync = <&sai2a 2>;
- clocks = <&rcc SAI2_K>, <&sai2a>;
- clock-names = "sai_ck", "MCLK";
- status = "okay";
-
- sai2b_port: port {
- sai2b_endpoint: endpoint {
- remote-endpoint = <&cs42l51_rx_endpoint>;
- format = "i2s";
- mclk-fs = <256>;
- dai-tdm-slot-num = <2>;
- dai-tdm-slot-width = <32>;
- };
- };
- };
-};
-
-&sdmmc1 {
- pinctrl-names = "default", "opendrain", "sleep";
- pinctrl-0 = <&sdmmc1_b4_pins_a>;
- pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
- pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
- broken-cd;
- st,neg-edge;
- bus-width = <4>;
- vmmc-supply = <&v3v3>;
- status = "okay";
-};
-
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_pins_a>;
- status = "okay";
-};
-
-&usbh_ehci {
- phys = <&usbphyc_port0>;
- phy-names = "usb";
- status = "okay";
-};
-
-&usbotg_hs {
- dr_mode = "peripheral";
- phys = <&usbphyc_port1 0>;
- phy-names = "usb2-phy";
- status = "okay";
-};
-
-&usbphyc {
- status = "okay";
-};
-
-&usbphyc_port0 {
- phy-supply = <&vdd_usb>;
-};
-
-&usbphyc_port1 {
- phy-supply = <&vdd_usb>;
-};
-
-&vrefbuf {
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- vdda-supply = <&vdd>;
- status = "okay";
};
@@ -4,9 +4,3 @@
*/
#include "stm32mp157a-dk1-u-boot.dtsi"
-
-&i2c1 {
- hdmi-transmitter at 39 {
- reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
- };
-};
@@ -6,11 +6,24 @@
/dts-v1/;
-#include "stm32mp157a-dk1.dts"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include "stm32mp15xx-dkx.dtsi"
/ {
model = "STMicroelectronics STM32MP157C-DK2 Discovery Board";
compatible = "st,stm32mp157c-dk2", "st,stm32mp157";
+
+ aliases {
+ ethernet0 = ðernet0;
+ serial0 = &uart4;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
};
&dsi {
@@ -161,7 +161,10 @@
&sdmmc1_b4_pins_a {
u-boot,dm-spl;
- pins {
+ pins1 {
+ u-boot,dm-spl;
+ };
+ pins2 {
u-boot,dm-spl;
};
};
@@ -5,8 +5,10 @@
*/
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xaa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
@@ -89,6 +91,22 @@
};
};
+&adc {
+ /* ANA0, ANA1 are dedicated pins and don't need pinctrl: only in6. */
+ pinctrl-0 = <&adc1_in6_pins_a>;
+ pinctrl-names = "default";
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdda>;
+ vref-supply = <&vdda>;
+ status = "disabled";
+ adc1: adc at 0 {
+ st,adc-channels = <0 1 6>;
+ /* 16.5 ck_cycles sampling time */
+ st,min-sample-time-nsecs = <400>;
+ status = "okay";
+ };
+};
+
&dac {
pinctrl-names = "default";
pinctrl-0 = <&dac_ch1_pins_a &dac_ch2_pins_a>;
@@ -182,8 +182,6 @@
ov5640: camera at 3c {
compatible = "ovti,ov5640";
- pinctrl-names = "default";
- pinctrl-0 = <&ov5640_pins>;
reg = <0x3c>;
clocks = <&clk_ext_camera>;
clock-names = "xclk";
@@ -224,12 +222,6 @@
pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
bias-pull-down;
};
-
- ov5640_pins: camera {
- pins = "agpio2", "agpio3"; /* stmfx pins 18 & 19 */
- drive-push-pull;
- output-low;
- };
};
};
};
@@ -291,6 +283,18 @@
};
};
+&sdmmc3 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc3_b4_pins_a>;
+ pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "disabled";
+};
+
&spi1 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_pins_a>;
@@ -304,7 +308,8 @@
status = "disabled";
pwm {
pinctrl-0 = <&pwm2_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm2_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer at 1 {
@@ -318,7 +323,8 @@
status = "disabled";
pwm {
pinctrl-0 = <&pwm8_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm8_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer at 7 {
@@ -332,7 +338,8 @@
status = "disabled";
pwm {
pinctrl-0 = <&pwm12_pins_a>;
- pinctrl-names = "default";
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
status = "okay";
};
timer at 11 {
@@ -348,6 +355,7 @@
&usbotg_hs {
dr_mode = "peripheral";
phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
status = "okay";
};
deleted file mode 100644
@@ -1,90 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue at st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller at 50002000 {
- st,package = <STM32MP_PKG_AA>;
-
- gpioa: gpio at 50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio at 50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio at 50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio at 50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio at 50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio at 50007000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- };
-
- gpiog: gpio at 50008000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- };
-
- gpioh: gpio at 50009000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- };
-
- gpioi: gpio at 5000a000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 128 16>;
- };
-
- gpioj: gpio at 5000b000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 144 16>;
- };
-
- gpiok: gpio at 5000c000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl 0 160 8>;
- };
- };
-
- pinctrl_z: pin-controller-z at 54004000 {
- st,package = <STM32MP_PKG_AA>;
-
- gpioz: gpio at 54004000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- };
- };
- };
-};
deleted file mode 100644
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue at st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller at 50002000 {
- st,package = <STM32MP_PKG_AB>;
-
- gpioa: gpio at 50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio at 50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio at 50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio at 50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio at 50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio at 50007000 {
- status = "okay";
- ngpios = <6>;
- gpio-ranges = <&pinctrl 6 86 6>;
- };
-
- gpiog: gpio at 50008000 {
- status = "okay";
- ngpios = <10>;
- gpio-ranges = <&pinctrl 6 102 10>;
- };
-
- gpioh: gpio at 50009000 {
- status = "okay";
- ngpios = <2>;
- gpio-ranges = <&pinctrl 0 112 2>;
- };
- };
- };
-};
deleted file mode 100644
@@ -1,78 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue at st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller at 50002000 {
- st,package = <STM32MP_PKG_AC>;
-
- gpioa: gpio at 50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio at 50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio at 50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio at 50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio at 50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio at 50007000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 80 16>;
- };
-
- gpiog: gpio at 50008000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 96 16>;
- };
-
- gpioh: gpio at 50009000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 112 16>;
- };
-
- gpioi: gpio at 5000a000 {
- status = "okay";
- ngpios = <12>;
- gpio-ranges = <&pinctrl 0 128 12>;
- };
- };
-
- pinctrl_z: pin-controller-z at 54004000 {
- st,package = <STM32MP_PKG_AC>;
-
- gpioz: gpio at 54004000 {
- status = "okay";
- ngpios = <8>;
- gpio-ranges = <&pinctrl_z 0 400 8>;
- };
- };
- };
-};
deleted file mode 100644
@@ -1,62 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
-/*
- * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
- * Author: Alexandre Torgue <alexandre.torgue at st.com>
- */
-
-#include "stm32mp157-pinctrl.dtsi"
-/ {
- soc {
- pinctrl: pin-controller at 50002000 {
- st,package = <STM32MP_PKG_AD>;
-
- gpioa: gpio at 50002000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 0 16>;
- };
-
- gpiob: gpio at 50003000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 16 16>;
- };
-
- gpioc: gpio at 50004000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 32 16>;
- };
-
- gpiod: gpio at 50005000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 48 16>;
- };
-
- gpioe: gpio at 50006000 {
- status = "okay";
- ngpios = <16>;
- gpio-ranges = <&pinctrl 0 64 16>;
- };
-
- gpiof: gpio at 50007000 {
- status = "okay";
- ngpios = <6>;
- gpio-ranges = <&pinctrl 6 86 6>;
- };
-
- gpiog: gpio at 50008000 {
- status = "okay";
- ngpios = <10>;
- gpio-ranges = <&pinctrl 6 102 10>;
- };
-
- gpioh: gpio at 50009000 {
- status = "okay";
- ngpios = <2>;
- gpio-ranges = <&pinctrl 0 112 2>;
- };
- };
- };
-};
new file mode 100644
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+/ {
+ soc {
+ cryp1: cryp at 54001000 {
+ compatible = "st,stm32mp1-cryp";
+ reg = <0x54001000 0x400>;
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&rcc CRYP1>;
+ resets = <&rcc CRYP1_R>;
+ status = "disabled";
+ };
+ };
+};
@@ -196,7 +196,10 @@
&sdmmc1_b4_pins_a {
u-boot,dm-spl;
- pins {
+ pins1 {
+ u-boot,dm-spl;
+ };
+ pins2 {
u-boot,dm-spl;
};
};
@@ -4,8 +4,10 @@
*/
/dts-v1/;
-#include "stm32mp157c.dtsi"
-#include "stm32mp157xaa-pinctrl.dtsi"
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxaa-pinctrl.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/mfd/st,stpmic1.h>
new file mode 100644
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+ memory at c0000000 {
+ device_type = "memory";
+ reg = <0xc0000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ mcuram2: mcuram2 at 10000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10000000 0x40000>;
+ no-map;
+ };
+
+ vdev0vring0: vdev0vring0 at 10040000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10040000 0x1000>;
+ no-map;
+ };
+
+ vdev0vring1: vdev0vring1 at 10041000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10041000 0x1000>;
+ no-map;
+ };
+
+ vdev0buffer: vdev0buffer at 10042000 {
+ compatible = "shared-dma-pool";
+ reg = <0x10042000 0x4000>;
+ no-map;
+ };
+
+ mcuram: mcuram at 30000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x30000000 0x40000>;
+ no-map;
+ };
+
+ retram: retram at 38000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x38000000 0x10000>;
+ no-map;
+ };
+
+ gpu_reserved: gpu at d4000000 {
+ reg = <0xd4000000 0x4000000>;
+ no-map;
+ };
+ };
+
+ led {
+ compatible = "gpio-leds";
+ blue {
+ label = "heartbeat";
+ gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+ };
+
+ sound {
+ compatible = "audio-graph-card";
+ label = "STM32MP1-DK";
+ routing =
+ "Playback" , "MCLK",
+ "Capture" , "MCLK",
+ "MICL" , "Mic Bias";
+ dais = <&sai2a_port &sai2b_port &i2s2_port>;
+ status = "okay";
+ };
+};
+
+&adc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&adc12_ain_pins_a>, <&adc12_usb_cc_pins_a>;
+ vdd-supply = <&vdd>;
+ vdda-supply = <&vdd>;
+ vref-supply = <&vrefbuf>;
+ status = "disabled";
+ adc1: adc at 0 {
+ /*
+ * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in18 & in19.
+ * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C:
+ * 5 * (56 + 47kOhms) * 5pF => 2.5us.
+ * Use arbitrary margin here (e.g. 5us).
+ */
+ st,min-sample-time-nsecs = <5000>;
+ /* AIN connector, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 6 13 18 19>;
+ status = "okay";
+ };
+ adc2: adc at 100 {
+ /* AIN connector, USB Type-C CC1 & CC2 */
+ st,adc-channels = <0 1 2 6 18 19>;
+ st,min-sample-time-nsecs = <5000>;
+ status = "okay";
+ };
+};
+
+&cec {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cec_pins_b>;
+ pinctrl-1 = <&cec_pins_sleep_b>;
+ status = "okay";
+};
+
+ðernet0 {
+ status = "okay";
+ pinctrl-0 = <ðernet0_rgmii_pins_a>;
+ pinctrl-1 = <ðernet0_rgmii_pins_sleep_a>;
+ pinctrl-names = "default", "sleep";
+ phy-mode = "rgmii-id";
+ max-speed = <1000>;
+ phy-handle = <&phy0>;
+
+ mdio0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ phy0: ethernet-phy at 0 {
+ reg = <0>;
+ };
+ };
+};
+
+&gpu {
+ contiguous-area = <&gpu_reserved>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_pins_a>;
+ pinctrl-1 = <&i2c1_pins_sleep_a>;
+ i2c-scl-rising-time-ns = <100>;
+ i2c-scl-falling-time-ns = <7>;
+ status = "okay";
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ hdmi-transmitter at 39 {
+ compatible = "sil,sii9022";
+ reg = <0x39>;
+ iovcc-supply = <&v3v3_hdmi>;
+ cvcc12-supply = <&v1v2_hdmi>;
+ reset-gpios = <&gpioa 10 GPIO_ACTIVE_LOW>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpiog>;
+ #sound-dai-cells = <0>;
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ sii9022_in: endpoint {
+ remote-endpoint = <<dc_ep0_out>;
+ };
+ };
+
+ port at 3 {
+ reg = <3>;
+ sii9022_tx_endpoint: endpoint {
+ remote-endpoint = <&i2s2_endpoint>;
+ };
+ };
+ };
+ };
+
+ cs42l51: cs42l51 at 4a {
+ compatible = "cirrus,cs42l51";
+ reg = <0x4a>;
+ #sound-dai-cells = <0>;
+ VL-supply = <&v3v3>;
+ VD-supply = <&v1v8_audio>;
+ VA-supply = <&v1v8_audio>;
+ VAHP-supply = <&v1v8_audio>;
+ reset-gpios = <&gpiog 9 GPIO_ACTIVE_LOW>;
+ clocks = <&sai2a>;
+ clock-names = "MCLK";
+ status = "okay";
+
+ cs42l51_port: port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cs42l51_tx_endpoint: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&sai2a_endpoint>;
+ frame-master;
+ bitclock-master;
+ };
+
+ cs42l51_rx_endpoint: endpoint at 1 {
+ reg = <1>;
+ remote-endpoint = <&sai2b_endpoint>;
+ frame-master;
+ bitclock-master;
+ };
+ };
+ };
+};
+
+&i2c4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_pins_a>;
+ i2c-scl-rising-time-ns = <185>;
+ i2c-scl-falling-time-ns = <20>;
+ status = "okay";
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+
+ typec: stusb1600 at 28 {
+ compatible = "st,stusb1600";
+ reg = <0x28>;
+ interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpioi>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stusb1600_pins_a>;
+
+ status = "okay";
+
+ typec_con: connector {
+ compatible = "usb-c-connector";
+ label = "USB-C";
+ power-role = "sink";
+ power-opmode = "default";
+ };
+ };
+
+ pmic: stpmic at 33 {
+ compatible = "st,stpmic1";
+ reg = <0x33>;
+ interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "okay";
+
+ regulators {
+ compatible = "st,stpmic1-regulators";
+ ldo1-supply = <&v3v3>;
+ ldo3-supply = <&vdd_ddr>;
+ ldo6-supply = <&v3v3>;
+ pwr_sw1-supply = <&bst_out>;
+ pwr_sw2-supply = <&bst_out>;
+
+ vddcore: buck1 {
+ regulator-name = "vddcore";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd_ddr: buck2 {
+ regulator-name = "vdd_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ vdd: buck3 {
+ regulator-name = "vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ st,mask-reset;
+ regulator-initial-mode = <0>;
+ regulator-over-current-protection;
+ };
+
+ v3v3: buck4 {
+ regulator-name = "v3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ regulator-initial-mode = <0>;
+ };
+
+ v1v8_audio: ldo1 {
+ regulator-name = "v1v8_audio";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO1 0>;
+ };
+
+ v3v3_hdmi: ldo2 {
+ regulator-name = "v3v3_hdmi";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO2 0>;
+ };
+
+ vtt_ddr: ldo3 {
+ regulator-name = "vtt_ddr";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <750000>;
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ vdd_usb: ldo4 {
+ regulator-name = "vdd_usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ interrupts = <IT_CURLIM_LDO4 0>;
+ };
+
+ vdda: ldo5 {
+ regulator-name = "vdda";
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <2900000>;
+ interrupts = <IT_CURLIM_LDO5 0>;
+ regulator-boot-on;
+ };
+
+ v1v2_hdmi: ldo6 {
+ regulator-name = "v1v2_hdmi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ interrupts = <IT_CURLIM_LDO6 0>;
+ };
+
+ vref_ddr: vref_ddr {
+ regulator-name = "vref_ddr";
+ regulator-always-on;
+ regulator-over-current-protection;
+ };
+
+ bst_out: boost {
+ regulator-name = "bst_out";
+ interrupts = <IT_OCP_BOOST 0>;
+ };
+
+ vbus_otg: pwr_sw1 {
+ regulator-name = "vbus_otg";
+ interrupts = <IT_OCP_OTG 0>;
+ };
+
+ vbus_sw: pwr_sw2 {
+ regulator-name = "vbus_sw";
+ interrupts = <IT_OCP_SWOUT 0>;
+ regulator-active-discharge = <1>;
+ };
+ };
+
+ onkey {
+ compatible = "st,stpmic1-onkey";
+ interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
+ interrupt-names = "onkey-falling", "onkey-rising";
+ power-off-time-sec = <10>;
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "st,stpmic1-wdt";
+ status = "disabled";
+ };
+ };
+};
+
+&i2s2 {
+ clocks = <&rcc SPI2>, <&rcc SPI2_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+ clock-names = "pclk", "i2sclk", "x8k", "x11k";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2s2_pins_a>;
+ pinctrl-1 = <&i2s2_pins_sleep_a>;
+ status = "okay";
+
+ i2s2_port: port {
+ i2s2_endpoint: endpoint {
+ remote-endpoint = <&sii9022_tx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ };
+ };
+};
+
+&ipcc {
+ status = "okay";
+};
+
+&iwdg2 {
+ timeout-sec = <32>;
+ status = "okay";
+};
+
+<dc {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <<dc_pins_a>;
+ pinctrl-1 = <<dc_pins_sleep_a>;
+ status = "okay";
+
+ port {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ltdc_ep0_out: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&sii9022_in>;
+ };
+ };
+};
+
+&m4_rproc {
+ memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+ <&vdev0vring1>, <&vdev0buffer>;
+ mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+ mbox-names = "vq0", "vq1", "shutdown";
+ interrupt-parent = <&exti>;
+ interrupts = <68 1>;
+ status = "okay";
+};
+
+&pwr_regulators {
+ vdd-supply = <&vdd>;
+ vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+ status = "okay";
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sai2 {
+ clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+ clock-names = "pclk", "x8k", "x11k";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sai2a_pins_a>, <&sai2b_pins_b>;
+ pinctrl-1 = <&sai2a_sleep_pins_a>, <&sai2b_sleep_pins_b>;
+ status = "okay";
+
+ sai2a: audio-controller at 4400b004 {
+ #clock-cells = <0>;
+ dma-names = "tx";
+ clocks = <&rcc SAI2_K>;
+ clock-names = "sai_ck";
+ status = "okay";
+
+ sai2a_port: port {
+ sai2a_endpoint: endpoint {
+ remote-endpoint = <&cs42l51_tx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
+ };
+
+ sai2b: audio-controller at 4400b024 {
+ dma-names = "rx";
+ st,sync = <&sai2a 2>;
+ clocks = <&rcc SAI2_K>, <&sai2a>;
+ clock-names = "sai_ck", "MCLK";
+ status = "okay";
+
+ sai2b_port: port {
+ sai2b_endpoint: endpoint {
+ remote-endpoint = <&cs42l51_rx_endpoint>;
+ format = "i2s";
+ mclk-fs = <256>;
+ dai-tdm-slot-num = <2>;
+ dai-tdm-slot-width = <32>;
+ };
+ };
+ };
+};
+
+&sdmmc1 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc1_b4_pins_a>;
+ pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "okay";
+};
+
+&sdmmc3 {
+ pinctrl-names = "default", "opendrain", "sleep";
+ pinctrl-0 = <&sdmmc3_b4_pins_a>;
+ pinctrl-1 = <&sdmmc3_b4_od_pins_a>;
+ pinctrl-2 = <&sdmmc3_b4_sleep_pins_a>;
+ broken-cd;
+ st,neg-edge;
+ bus-width = <4>;
+ vmmc-supply = <&v3v3>;
+ status = "disabled";
+};
+
+&timers1 {
+ /* spare dmas for other usage */
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm1_pins_a>;
+ pinctrl-1 = <&pwm1_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer at 0 {
+ status = "okay";
+ };
+};
+
+&timers3 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm3_pins_a>;
+ pinctrl-1 = <&pwm3_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer at 2 {
+ status = "okay";
+ };
+};
+
+&timers4 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm4_pins_a &pwm4_pins_b>;
+ pinctrl-1 = <&pwm4_sleep_pins_a &pwm4_sleep_pins_b>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer at 3 {
+ status = "okay";
+ };
+};
+
+&timers5 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm5_pins_a>;
+ pinctrl-1 = <&pwm5_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer at 4 {
+ status = "okay";
+ };
+};
+
+&timers6 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ timer at 5 {
+ status = "okay";
+ };
+};
+
+&timers12 {
+ /delete-property/dmas;
+ /delete-property/dma-names;
+ status = "disabled";
+ pwm {
+ pinctrl-0 = <&pwm12_pins_a>;
+ pinctrl-1 = <&pwm12_sleep_pins_a>;
+ pinctrl-names = "default", "sleep";
+ status = "okay";
+ };
+ timer at 11 {
+ status = "okay";
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+};
+
+&usbh_ehci {
+ phys = <&usbphyc_port0>;
+ status = "okay";
+};
+
+&usbotg_hs {
+ dr_mode = "peripheral";
+ phys = <&usbphyc_port1 0>;
+ phy-names = "usb2-phy";
+ status = "okay";
+};
+
+&usbphyc {
+ status = "okay";
+};
+
+&usbphyc_port0 {
+ phy-supply = <&vdd_usb>;
+};
+
+&usbphyc_port1 {
+ phy-supply = <&vdd_usb>;
+};
+
+&vrefbuf {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ vdda-supply = <&vdd>;
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioa: gpio at 50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio at 50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio at 50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio at 5000a000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 128 16>;
+ };
+
+ gpioj: gpio at 5000b000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 144 16>;
+ };
+
+ gpiok: gpio at 5000c000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl 0 160 8>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AA>;
+
+ gpioz: gpio at 54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AB>;
+
+ gpioa: gpio at 50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio at 50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio at 50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
new file mode 100644
@@ -0,0 +1,73 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioa: gpio at 50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 50007000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 80 16>;
+ };
+
+ gpiog: gpio at 50008000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 96 16>;
+ };
+
+ gpioh: gpio at 50009000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 112 16>;
+ };
+
+ gpioi: gpio at 5000a000 {
+ status = "okay";
+ ngpios = <12>;
+ gpio-ranges = <&pinctrl 0 128 12>;
+ };
+};
+
+&pinctrl_z {
+ st,package = <STM32MP_PKG_AC>;
+
+ gpioz: gpio at 54004000 {
+ status = "okay";
+ ngpios = <8>;
+ gpio-ranges = <&pinctrl_z 0 400 8>;
+ };
+};
new file mode 100644
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (C) STMicroelectronics 2019 - All Rights Reserved
+ * Author: Alexandre Torgue <alexandre.torgue at st.com> for STMicroelectronics.
+ */
+
+&pinctrl {
+ st,package = <STM32MP_PKG_AD>;
+
+ gpioa: gpio at 50002000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 0 16>;
+ };
+
+ gpiob: gpio at 50003000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 16 16>;
+ };
+
+ gpioc: gpio at 50004000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 32 16>;
+ };
+
+ gpiod: gpio at 50005000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 48 16>;
+ };
+
+ gpioe: gpio at 50006000 {
+ status = "okay";
+ ngpios = <16>;
+ gpio-ranges = <&pinctrl 0 64 16>;
+ };
+
+ gpiof: gpio at 50007000 {
+ status = "okay";
+ ngpios = <6>;
+ gpio-ranges = <&pinctrl 6 86 6>;
+ };
+
+ gpiog: gpio at 50008000 {
+ status = "okay";
+ ngpios = <10>;
+ gpio-ranges = <&pinctrl 6 102 10>;
+ };
+
+ gpioh: gpio at 50009000 {
+ status = "okay";
+ ngpios = <2>;
+ gpio-ranges = <&pinctrl 0 112 2>;
+ };
+};
This commit manages diversity for STM32M15x SOCs with: - dedicated files to support all STM32MP15 SOCs family. The differences between those SOCs are: -STM32MP151 [1]: common file. -STM32MP153 [2]: STM32MP151 + CANs + a second CortexA7-CPU. -STM32MP157 [3]: STM32MP153 + DSI + GPU. - new files to manage security diversity on STM32MP15x SOCs. On STM32MP15xY, "Y" gives information: -Y = A means no cryp IP and no secure boot. -Y = C means cryp IP + secure boot. - stm32mp157 pinctrl files to better manage package diversity. Signed-off-by: Patrick Delaunay <patrick.delaunay at st.com> --- arch/arm/dts/stm32mp15-pinctrl.dtsi | 1114 +++++++++++++++++ .../dts/{stm32mp157c.dtsi => stm32mp151.dtsi} | 274 ++-- arch/arm/dts/stm32mp153.dtsi | 45 + arch/arm/dts/stm32mp157-pinctrl.dtsi | 1057 ---------------- arch/arm/dts/stm32mp157.dtsi | 31 + .../arm/dts/stm32mp157a-avenger96-u-boot.dtsi | 9 +- arch/arm/dts/stm32mp157a-avenger96.dts | 5 +- arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 5 +- arch/arm/dts/stm32mp157a-dk1.dts | 541 +------- arch/arm/dts/stm32mp157c-dk2-u-boot.dtsi | 6 - arch/arm/dts/stm32mp157c-dk2.dts | 15 +- arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 5 +- arch/arm/dts/stm32mp157c-ed1.dts | 22 +- arch/arm/dts/stm32mp157c-ev1.dts | 30 +- arch/arm/dts/stm32mp157xaa-pinctrl.dtsi | 90 -- arch/arm/dts/stm32mp157xab-pinctrl.dtsi | 62 - arch/arm/dts/stm32mp157xac-pinctrl.dtsi | 78 -- arch/arm/dts/stm32mp157xad-pinctrl.dtsi | 62 - arch/arm/dts/stm32mp15xc.dtsi | 18 + arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi | 5 +- arch/arm/dts/stm32mp15xx-dhcom.dtsi | 6 +- arch/arm/dts/stm32mp15xx-dkx.dtsi | 639 ++++++++++ arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi | 85 ++ arch/arm/dts/stm32mp15xxab-pinctrl.dtsi | 57 + arch/arm/dts/stm32mp15xxac-pinctrl.dtsi | 73 ++ arch/arm/dts/stm32mp15xxad-pinctrl.dtsi | 57 + 26 files changed, 2402 insertions(+), 1989 deletions(-) create mode 100644 arch/arm/dts/stm32mp15-pinctrl.dtsi rename arch/arm/dts/{stm32mp157c.dtsi => stm32mp151.dtsi} (89%) create mode 100644 arch/arm/dts/stm32mp153.dtsi delete mode 100644 arch/arm/dts/stm32mp157-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp157.dtsi delete mode 100644 arch/arm/dts/stm32mp157xaa-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157xab-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157xac-pinctrl.dtsi delete mode 100644 arch/arm/dts/stm32mp157xad-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xc.dtsi create mode 100644 arch/arm/dts/stm32mp15xx-dkx.dtsi create mode 100644 arch/arm/dts/stm32mp15xxaa-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xxab-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xxac-pinctrl.dtsi create mode 100644 arch/arm/dts/stm32mp15xxad-pinctrl.dtsi