@@ -16,12 +16,6 @@
#include <sdhci.h>
#include <dm.h>
-#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
-void *aligned_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
-#else
-void *aligned_buffer;
-#endif
-
static void sdhci_reset(struct sdhci_host *host, u8 mask)
{
unsigned long timeout;
@@ -149,9 +143,10 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
(host->start_addr & 0x7) != 0x0) {
*is_aligned = 0;
- host->start_addr = (unsigned long)aligned_buffer;
+ host->start_addr = (unsigned long)host->align_buffer;
if (data->flags != MMC_DATA_READ)
- memcpy(aligned_buffer, data->src, trans_bytes);
+ memcpy(host->align_buffer, data->src,
+ trans_bytes);
}
#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
@@ -160,9 +155,9 @@ static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
* CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is defined
*/
*is_aligned = 0;
- host->start_addr = (unsigned long)aligned_buffer;
+ host->start_addr = (unsigned long)host->align_buffer;
if (data->flags != MMC_DATA_READ)
- memcpy(aligned_buffer, data->src, trans_bytes);
+ memcpy(host->align_buffer, data->src, trans_bytes);
#endif
sdhci_writel(host, host->start_addr, SDHCI_DMA_ADDRESS);
@@ -381,7 +376,7 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd,
if (!ret) {
if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
!is_aligned && (data->flags == MMC_DATA_READ))
- memcpy(data->dest, aligned_buffer, trans_bytes);
+ memcpy(data->dest, host->align_buffer, trans_bytes);
return 0;
}
@@ -630,14 +625,18 @@ static int sdhci_init(struct mmc *mmc)
sdhci_reset(host, SDHCI_RESET_ALL);
- if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
- aligned_buffer = memalign(8, 512*1024);
- if (!aligned_buffer) {
+#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
+ host->align_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
+#else
+ if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) {
+ host->align_buffer = memalign(8, 512 * 1024);
+ if (!host->align_buffer) {
printf("%s: Aligned buffer alloc failed!!!\n",
__func__);
return -ENOMEM;
}
}
+#endif
sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
@@ -321,6 +321,7 @@ struct sdhci_host {
uint voltages;
struct mmc_config cfg;
+ void *align_buffer;
dma_addr_t start_addr;
int flags;
#define USE_SDMA (0x1 << 0)
Using the global variable does not look nice. Add a new field sthci::align_buffer to point to the bounce buffer. Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com> --- drivers/mmc/sdhci.c | 27 +++++++++++++-------------- include/sdhci.h | 1 + 2 files changed, 14 insertions(+), 14 deletions(-)