@@ -204,6 +204,24 @@ struct stfsm {
uint32_t fifo_dir_delay;
};
+struct stfsm_seq {
+ uint32_t data_size;
+ uint32_t addr1;
+ uint32_t addr2;
+ uint32_t addr_cfg;
+ uint32_t seq_opc[5];
+ uint32_t mode;
+ uint32_t dummy;
+ uint32_t status;
+ uint8_t seq[16];
+ uint32_t seq_cfg;
+} __packed __aligned(4);
+
+static inline int stfsm_is_idle(struct stfsm *fsm)
+{
+ return readl(fsm->base + SPI_FAST_SEQ_STA) & 0x10;
+}
+
static inline uint32_t stfsm_fifo_available(struct stfsm *fsm)
{
return (readl(fsm->base + SPI_FAST_SEQ_STA) >> 5) & 0x7f;
@@ -225,6 +243,37 @@ static void stfsm_clear_fifo(struct stfsm *fsm)
}
}
+static inline void stfsm_load_seq(struct stfsm *fsm,
+ const struct stfsm_seq *seq)
+{
+ void __iomem *dst = fsm->base + SPI_FAST_SEQ_TRANSFER_SIZE;
+ const uint32_t *src = (const uint32_t *)seq;
+ int words = sizeof(*seq) / sizeof(*src);
+
+ BUG_ON(!stfsm_is_idle(fsm));
+
+ while (words--) {
+ writel(*src, dst);
+ src++;
+ dst += 4;
+ }
+}
+
+static void stfsm_wait_seq(struct stfsm *fsm)
+{
+ unsigned long timeo = jiffies + HZ;
+
+ while (time_before(jiffies, timeo)) {
+ if (stfsm_is_idle(fsm))
+ return;
+
+ cond_resched();
+ }
+
+ if (!stfsm_is_idle(fsm))
+ dev_err(fsm->dev, "timeout on sequence completion\n");
+}
+
static int stfsm_set_mode(struct stfsm *fsm, uint32_t mode)
{
int ret, timeout = 10;
The FSM hardware works by setting a predetermined sequence of register writes. Rather than open coding them inside each functional block we're going to define them in a series of formatted 'sequence structures'. This patch provides the framework which shall be used for every action. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/mtd/devices/st_spi_fsm.c | 49 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)