diff mbox series

[4.9,070/171] cpufreq: Register drivers only after CPU devices have been registered

Message ID 20200102220556.622524885@linuxfoundation.org
State Superseded
Headers show
Series None | expand

Commit Message

Greg Kroah-Hartman Jan. 2, 2020, 10:06 p.m. UTC
From: Viresh Kumar <viresh.kumar@linaro.org>

[ Upstream commit 46770be0cf94149ca48be87719bda1d951066644 ]

The cpufreq core heavily depends on the availability of the struct
device for CPUs and if they aren't available at the time cpufreq driver
is registered, we will never succeed in making cpufreq work.

This happens due to following sequence of events:

- cpufreq_register_driver()
  - subsys_interface_register()
  - return 0; //successful registration of driver

... at a later point of time

- register_cpu();
  - device_register();
    - bus_probe_device();
      - sif->add_dev();
	- cpufreq_add_dev();
	  - get_cpu_device(); //FAILS
  - per_cpu(cpu_sys_devices, num) = &cpu->dev; //used by get_cpu_device()
  - return 0; //CPU registered successfully

Because the per-cpu variable cpu_sys_devices is set only after the CPU
device is regsitered, cpufreq will never be able to get it when
cpufreq_add_dev() is called.

This patch avoids this failure by making sure device structure of at
least CPU0 is available when the cpufreq driver is registered, else
return -EPROBE_DEFER.

Reported-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/cpufreq/cpufreq.c | 7 +++++++
 1 file changed, 7 insertions(+)
diff mbox series

Patch

diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 063ce77df619..86d48f8c6a2e 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -2449,6 +2449,13 @@  int cpufreq_register_driver(struct cpufreq_driver *driver_data)
 	if (cpufreq_disabled())
 		return -ENODEV;
 
+	/*
+	 * The cpufreq core depends heavily on the availability of device
+	 * structure, make sure they are available before proceeding further.
+	 */
+	if (!get_cpu_device(0))
+		return -EPROBE_DEFER;
+
 	if (!driver_data || !driver_data->verify || !driver_data->init ||
 	    !(driver_data->setpolicy || driver_data->target_index ||
 		    driver_data->target) ||