==================
=== after fix ====
root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0
/dev/mmcblk0:
Timing buffered disk reads: 408 MB in 3.00 seconds = 135.94 MB/sec
==================
Fixes: f928a4a377e4 ("ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
arch/arm/boot/dts/imx7-colibri.dtsi | 1 -
1 file changed, 1 deletion(-)
@@ -336,7 +336,6 @@
assigned-clock-rates = <400000000>;
bus-width = <8>;
fsl,tuning-step = <2>;
- max-frequency = <100000000>;
vmmc-supply = <®_module_3v3>;
vqmmc-supply = <®_DCDC3>;
non-removable;
From: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> commit 2773fe1d31c42ffae2a9cb9a6055d99dd86e2fee upstream. SD/MMC on Colibri iMX7S/D modules successfully support 200Mhz frequency in HS200 mode. Removing the unnecessary max-frequency limit significantly increases the performance: == before fix ==== root@colibri-imx7-emmc:~# hdparm -t /dev/mmcblk0 /dev/mmcblk0: Timing buffered disk reads: 252 MB in 3.02 seconds = 83.54 MB/sec