@@ -238,6 +238,16 @@ static void xenon_voltage_switch(struct
{
/* Wait for 5ms after set 1.8V signal enable bit */
usleep_range(5000, 5500);
+
+ /*
+ * For some reason the controller's Host Control2 register reports
+ * the bit representing 1.8V signaling as 0 when read after it was
+ * written as 1. Subsequent read reports 1.
+ *
+ * Since this may cause some issues, do an empty read of the Host
+ * Control2 register here to circumvent this.
+ */
+ sdhci_readw(host, SDHCI_HOST_CONTROL2);
}
static const struct sdhci_ops sdhci_xenon_ops = {