diff mbox series

[4.4,289/312] ravb: Add missing free_irq() call to ravb_close()

Message ID 20200508123144.711327872@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH May 8, 2020, 12:34 p.m. UTC
From: Geert Uytterhoeven <geert+renesas@glider.be>

commit 7fa816b92c52e2c304f2ff6401e0d51e1d229ca5 upstream.

When reopening the network device on ra7795/salvator-x, e.g. after a
DHCP timeout:

    IP-Config: Reopening network devices...
    genirq: Flags mismatch irq 139. 00000000 (eth0:ch24:emac) vs. 00000000 (eth0:ch24:emac)
    ravb e6800000.ethernet eth0: cannot request IRQ eth0:ch24:emac
    IP-Config: Failed to open eth0
    IP-Config: No network devices available

The "mismatch" is due to requesting an IRQ that is already in use,
while IRQF_PROBE_SHARED wasn't set.

However, the real cause is that ravb_close() doesn't release the R-Car
Gen3-specific secondary IRQ.

Add the missing free_irq() call to fix this.

Fixes: 22d4df8ff3a3cc72 ("ravb: Add support for r8a7795 SoC")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/ethernet/renesas/ravb_main.c |    2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1528,6 +1528,8 @@  static int ravb_close(struct net_device
 		priv->phydev = NULL;
 	}
 
+	if (priv->chip_id == RCAR_GEN3)
+		free_irq(priv->emac_irq, ndev);
 	free_irq(ndev->irq, ndev);
 
 	napi_disable(&priv->napi[RAVB_NC]);