@@ -87,6 +87,10 @@ struct iavf_vsi {
#define IAVF_HLUT_ARRAY_SIZE ((IAVF_VFQF_HLUT_MAX_INDEX + 1) * 4)
#define IAVF_MBPS_DIVISOR 125000 /* divisor to convert to Mbps */
+#define IAVF_VIRTCHNL_VF_RESOURCE_SIZE (sizeof(struct virtchnl_vf_resource) + \
+ (IAVF_MAX_VF_VSI * \
+ sizeof(struct virtchnl_vsi_resource)))
+
/* MAX_MSIX_Q_VECTORS of these are allocated,
* but we only use one per queue-specific vector.
*/
@@ -306,6 +310,14 @@ struct iavf_adapter {
bool netdev_registered;
bool link_up;
enum virtchnl_link_speed link_speed;
+ /* This is only populated if the VIRTCHNL_VF_CAP_ADV_LINK_SPEED is set
+ * in vf_res->vf_cap_flags. Use ADV_LINK_SUPPORT macro to determine if
+ * this field is valid. This field should be used going forward and the
+ * enum virtchnl_link_speed above should be considered the legacy way of
+ * storing/communicating link speeds.
+ */
+ u32 link_speed_mbps;
+
enum virtchnl_ops current_op;
#define CLIENT_ALLOWED(_a) ((_a)->vf_res ? \
(_a)->vf_res->vf_cap_flags & \
@@ -322,6 +334,8 @@ struct iavf_adapter {
VIRTCHNL_VF_OFFLOAD_RSS_PF)))
#define VLAN_ALLOWED(_a) ((_a)->vf_res->vf_cap_flags & \
VIRTCHNL_VF_OFFLOAD_VLAN)
+#define ADV_LINK_SUPPORT(_a) ((_a)->vf_res->vf_cap_flags & \
+ VIRTCHNL_VF_CAP_ADV_LINK_SPEED)
struct virtchnl_vf_resource *vf_res; /* incl. all VSIs */
struct virtchnl_vsi_resource *vsi_res; /* our LAN VSI */
struct virtchnl_version_info pf_version;
@@ -278,7 +278,18 @@ static int iavf_get_link_ksettings(struct net_device *netdev,
ethtool_link_ksettings_zero_link_mode(cmd, supported);
cmd->base.autoneg = AUTONEG_DISABLE;
cmd->base.port = PORT_NONE;
- /* Set speed and duplex */
+ cmd->base.duplex = DUPLEX_FULL;
+
+ if (ADV_LINK_SUPPORT(adapter)) {
+ if (adapter->link_speed_mbps &&
+ adapter->link_speed_mbps < U32_MAX)
+ cmd->base.speed = adapter->link_speed_mbps;
+ else
+ cmd->base.speed = SPEED_UNKNOWN;
+
+ return 0;
+ }
+
switch (adapter->link_speed) {
case IAVF_LINK_SPEED_40GB:
cmd->base.speed = SPEED_40000;
@@ -306,7 +317,6 @@ static int iavf_get_link_ksettings(struct net_device *netdev,
default:
break;
}
- cmd->base.duplex = DUPLEX_FULL;
return 0;
}
@@ -1756,17 +1756,17 @@ static int iavf_init_get_resources(struct iavf_adapter *adapter)
struct net_device *netdev = adapter->netdev;
struct pci_dev *pdev = adapter->pdev;
struct iavf_hw *hw = &adapter->hw;
- int err = 0, bufsz;
+ int err;
WARN_ON(adapter->state != __IAVF_INIT_GET_RESOURCES);
/* aq msg sent, awaiting reply */
if (!adapter->vf_res) {
- bufsz = sizeof(struct virtchnl_vf_resource) +
- (IAVF_MAX_VF_VSI *
- sizeof(struct virtchnl_vsi_resource));
- adapter->vf_res = kzalloc(bufsz, GFP_KERNEL);
- if (!adapter->vf_res)
+ adapter->vf_res = kzalloc(IAVF_VIRTCHNL_VF_RESOURCE_SIZE,
+ GFP_KERNEL);
+ if (!adapter->vf_res) {
+ err = -ENOMEM;
goto err;
+ }
}
err = iavf_get_vf_config(adapter);
if (err == IAVF_ERR_ADMIN_QUEUE_NO_WORK) {
@@ -2036,7 +2036,7 @@ static void iavf_disable_vf(struct iavf_adapter *adapter)
iavf_reset_interrupt_capability(adapter);
iavf_free_queues(adapter);
iavf_free_q_vectors(adapter);
- kfree(adapter->vf_res);
+ memset(adapter->vf_res, 0, IAVF_VIRTCHNL_VF_RESOURCE_SIZE);
iavf_shutdown_adminq(&adapter->hw);
adapter->netdev->flags &= ~IFF_UP;
clear_bit(__IAVF_IN_CRITICAL_TASK, &adapter->crit_section);
@@ -2487,6 +2487,16 @@ static int iavf_validate_tx_bandwidth(struct iavf_adapter *adapter,
{
int speed = 0, ret = 0;
+ if (ADV_LINK_SUPPORT(adapter)) {
+ if (adapter->link_speed_mbps < U32_MAX) {
+ speed = adapter->link_speed_mbps;
+ goto validate_bw;
+ } else {
+ dev_err(&adapter->pdev->dev, "Unknown link speed\n");
+ return -EINVAL;
+ }
+ }
+
switch (adapter->link_speed) {
case IAVF_LINK_SPEED_40GB:
speed = 40000;
@@ -2510,6 +2520,7 @@ static int iavf_validate_tx_bandwidth(struct iavf_adapter *adapter,
break;
}
+validate_bw:
if (max_tx_rate > speed) {
dev_err(&adapter->pdev->dev,
"Invalid tx rate specified\n");
@@ -139,7 +139,8 @@ int iavf_send_vf_config_msg(struct iavf_adapter *adapter)
VIRTCHNL_VF_OFFLOAD_ENCAP |
VIRTCHNL_VF_OFFLOAD_ENCAP_CSUM |
VIRTCHNL_VF_OFFLOAD_REQ_QUEUES |
- VIRTCHNL_VF_OFFLOAD_ADQ;
+ VIRTCHNL_VF_OFFLOAD_ADQ |
+ VIRTCHNL_VF_CAP_ADV_LINK_SPEED;
adapter->current_op = VIRTCHNL_OP_GET_VF_RESOURCES;
adapter->aq_required &= ~IAVF_FLAG_AQ_GET_CONFIG;
@@ -918,6 +919,8 @@ void iavf_disable_vlan_stripping(struct iavf_adapter *adapter)
iavf_send_pf_msg(adapter, VIRTCHNL_OP_DISABLE_VLAN_STRIPPING, NULL, 0);
}
+#define IAVF_MAX_SPEED_STRLEN 13
+
/**
* iavf_print_link_message - print link up or down
* @adapter: adapter structure
@@ -927,37 +930,99 @@ void iavf_disable_vlan_stripping(struct iavf_adapter *adapter)
static void iavf_print_link_message(struct iavf_adapter *adapter)
{
struct net_device *netdev = adapter->netdev;
- char *speed = "Unknown ";
+ int link_speed_mbps;
+ char *speed;
if (!adapter->link_up) {
netdev_info(netdev, "NIC Link is Down\n");
return;
}
+ speed = kcalloc(1, IAVF_MAX_SPEED_STRLEN, GFP_KERNEL);
+ if (!speed)
+ return;
+
+ if (ADV_LINK_SUPPORT(adapter)) {
+ link_speed_mbps = adapter->link_speed_mbps;
+ goto print_link_msg;
+ }
+
switch (adapter->link_speed) {
case IAVF_LINK_SPEED_40GB:
- speed = "40 G";
+ link_speed_mbps = SPEED_40000;
break;
case IAVF_LINK_SPEED_25GB:
- speed = "25 G";
+ link_speed_mbps = SPEED_25000;
break;
case IAVF_LINK_SPEED_20GB:
- speed = "20 G";
+ link_speed_mbps = SPEED_20000;
break;
case IAVF_LINK_SPEED_10GB:
- speed = "10 G";
+ link_speed_mbps = SPEED_10000;
break;
case IAVF_LINK_SPEED_1GB:
- speed = "1000 M";
+ link_speed_mbps = SPEED_1000;
break;
case IAVF_LINK_SPEED_100MB:
- speed = "100 M";
+ link_speed_mbps = SPEED_100;
break;
default:
+ link_speed_mbps = SPEED_UNKNOWN;
break;
}
- netdev_info(netdev, "NIC Link is Up %sbps Full Duplex\n", speed);
+print_link_msg:
+ if (link_speed_mbps > SPEED_1000) {
+ if (link_speed_mbps == SPEED_2500)
+ snprintf(speed, IAVF_MAX_SPEED_STRLEN, "2.5 Gbps");
+ else
+ /* convert to Gbps inline */
+ snprintf(speed, IAVF_MAX_SPEED_STRLEN, "%d %s",
+ link_speed_mbps / 1000, "Gbps");
+ } else if (link_speed_mbps == SPEED_UNKNOWN) {
+ snprintf(speed, IAVF_MAX_SPEED_STRLEN, "%s", "Unknown Mbps");
+ } else {
+ snprintf(speed, IAVF_MAX_SPEED_STRLEN, "%u %s",
+ link_speed_mbps, "Mbps");
+ }
+
+ netdev_info(netdev, "NIC Link is Up Speed is %s Full Duplex\n", speed);
+ kfree(speed);
+}
+
+/**
+ * iavf_get_vpe_link_status
+ * @adapter: adapter structure
+ * @vpe: virtchnl_pf_event structure
+ *
+ * Helper function for determining the link status
+ **/
+static bool
+iavf_get_vpe_link_status(struct iavf_adapter *adapter,
+ struct virtchnl_pf_event *vpe)
+{
+ if (ADV_LINK_SUPPORT(adapter))
+ return vpe->event_data.link_event_adv.link_status;
+ else
+ return vpe->event_data.link_event.link_status;
+}
+
+/**
+ * iavf_set_adapter_link_speed_from_vpe
+ * @adapter: adapter structure for which we are setting the link speed
+ * @vpe: virtchnl_pf_event structure that contains the link speed we are setting
+ *
+ * Helper function for setting iavf_adapter link speed
+ **/
+static void
+iavf_set_adapter_link_speed_from_vpe(struct iavf_adapter *adapter,
+ struct virtchnl_pf_event *vpe)
+{
+ if (ADV_LINK_SUPPORT(adapter))
+ adapter->link_speed_mbps =
+ vpe->event_data.link_event_adv.link_speed;
+ else
+ adapter->link_speed = vpe->event_data.link_event.link_speed;
}
/**
@@ -1187,12 +1252,11 @@ void iavf_virtchnl_completion(struct iavf_adapter *adapter,
if (v_opcode == VIRTCHNL_OP_EVENT) {
struct virtchnl_pf_event *vpe =
(struct virtchnl_pf_event *)msg;
- bool link_up = vpe->event_data.link_event.link_status;
+ bool link_up = iavf_get_vpe_link_status(adapter, vpe);
switch (vpe->event) {
case VIRTCHNL_EVENT_LINK_CHANGE:
- adapter->link_speed =
- vpe->event_data.link_event.link_speed;
+ iavf_set_adapter_link_speed_from_vpe(adapter, vpe);
/* we've already got the right link status, bail */
if (adapter->link_up == link_up)