diff mbox series

[5.4,110/314] clk: meson: meson8b: Dont rely on u-boot to init all GP_PLL registers

Message ID 20200623195344.114396450@linuxfoundation.org
State New
Headers show
Series None | expand

Commit Message

Greg KH June 23, 2020, 7:55 p.m. UTC 
From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit a29ae8600d50ece1856b062a39ed296b8b952259 ]

Not all u-boot versions initialize the HHI_GP_PLL_CNTL[2-5] registers.
In that case all HHI_GPLL_PLL_CNTL[1-5] registers are 0x0 and when
booting Linux the PLL fails to lock.
The initialization sequence from u-boot is:
- put the PLL into reset
- write 0x59C88000 to HHI_GP_PLL_CNTL2
- write 0xCA463823 to HHI_GP_PLL_CNTL3
- write 0x0286A027 to HHI_GP_PLL_CNTL4
- write 0x00003000 to HHI_GP_PLL_CNTL5
- set M, N, OD and the enable bit
- take the PLL out of reset
- check if it has locked
- disable the PLL

In Linux we already initialize M, N, OD, the enable and the reset bits.
Also the HHI_GP_PLL_CNTL[2-5] registers with these magic values (the
exact meaning is unknown) so the PLL can lock when the vendor u-boot did
not initialize these registers yet.

Fixes: b882964b376f21 ("clk: meson: meson8b: add support for the GP_PLL clock on Meson8m2")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200501215717.735393-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/clk/meson/meson8b.c | 9 +++++++++
 drivers/clk/meson/meson8b.h | 4 ++++
 2 files changed, 13 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 4f9b79ed79d7d..082178a0f41a3 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -1910,6 +1910,13 @@  static struct clk_regmap meson8b_mali = {
 	},
 };
 
+static const struct reg_sequence meson8m2_gp_pll_init_regs[] = {
+	{ .reg = HHI_GP_PLL_CNTL2,	.def = 0x59c88000 },
+	{ .reg = HHI_GP_PLL_CNTL3,	.def = 0xca463823 },
+	{ .reg = HHI_GP_PLL_CNTL4,	.def = 0x0286a027 },
+	{ .reg = HHI_GP_PLL_CNTL5,	.def = 0x00003000 },
+};
+
 static const struct pll_params_table meson8m2_gp_pll_params_table[] = {
 	PLL_PARAMS(182, 3),
 	{ /* sentinel */ },
@@ -1943,6 +1950,8 @@  static struct clk_regmap meson8m2_gp_pll_dco = {
 			.width   = 1,
 		},
 		.table = meson8m2_gp_pll_params_table,
+		.init_regs = meson8m2_gp_pll_init_regs,
+		.init_count = ARRAY_SIZE(meson8m2_gp_pll_init_regs),
 	},
 	.hw.init = &(struct clk_init_data){
 		.name = "gp_pll_dco",
diff --git a/drivers/clk/meson/meson8b.h b/drivers/clk/meson/meson8b.h
index c889fbeec30f0..c91fb07fcb657 100644
--- a/drivers/clk/meson/meson8b.h
+++ b/drivers/clk/meson/meson8b.h
@@ -20,6 +20,10 @@ 
  * [0] http://dn.odroid.com/S805/Datasheet/S805_Datasheet%20V0.8%2020150126.pdf
  */
 #define HHI_GP_PLL_CNTL			0x40  /* 0x10 offset in data sheet */
+#define HHI_GP_PLL_CNTL2		0x44  /* 0x11 offset in data sheet */
+#define HHI_GP_PLL_CNTL3		0x48  /* 0x12 offset in data sheet */
+#define HHI_GP_PLL_CNTL4		0x4C  /* 0x13 offset in data sheet */
+#define HHI_GP_PLL_CNTL5		0x50  /* 0x14 offset in data sheet */
 #define HHI_VIID_CLK_DIV		0x128 /* 0x4a offset in data sheet */
 #define HHI_VIID_CLK_CNTL		0x12c /* 0x4b offset in data sheet */
 #define HHI_GCLK_MPEG0			0x140 /* 0x50 offset in data sheet */