| Message ID | 1386854770-2173-3-git-send-email-mporter@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
On Thu, Dec 12, 2013 at 08:26:03AM -0500, Matt Porter wrote: > dwc2/s3c-hsotg require a single clock to be specified and optionally > a generic phy. On the s3c-hsotg driver old style USB phy support is > present as a fallback so the generic phy properties are optional. > > Signed-off-by: Matt Porter <mporter@linaro.org> > Acked-by: Kishon Vijay Abraham I <kishon@ti.com> Here I need Acked-by from any of the DT folks. It's pretty obvious patch, so I woudln't expect to have any issues.
diff --git a/Documentation/devicetree/bindings/staging/dwc2.txt b/Documentation/devicetree/bindings/staging/dwc2.txt index 1a1b7cf..a1753ed 100644 --- a/Documentation/devicetree/bindings/staging/dwc2.txt +++ b/Documentation/devicetree/bindings/staging/dwc2.txt @@ -5,6 +5,14 @@ Required properties: - compatible : "snps,dwc2" - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt +- clocks: clock provider specifier +- clock-names: shall be "otg" +Refer to clk/clock-bindings.txt for generic clock consumer properties + +Optional properties: +- phys: phy provider specifier +- phy-names: shall be "device" +Refer to phy/phy-bindings.txt for generic phy consumer properties Example: @@ -12,4 +20,8 @@ Example: compatible = "ralink,rt3050-usb, snps,dwc2"; reg = <0x101c0000 40000>; interrupts = <18>; + clocks = <&usb_otg_ahb_clk>; + clock-names = "otg"; + phys = <&usbphy>; + phy-names = "usb2-phy"; };