@@ -20,6 +20,8 @@ struct phy_device;
int ethnl_cable_test_alloc(struct phy_device *phydev);
void ethnl_cable_test_free(struct phy_device *phydev);
void ethnl_cable_test_finished(struct phy_device *phydev);
+int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u16 result);
+int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm);
#else
static inline int ethnl_cable_test_alloc(struct phy_device *phydev)
{
@@ -33,5 +35,16 @@ static inline void ethnl_cable_test_free(struct phy_device *phydev)
static inline void ethnl_cable_test_finished(struct phy_device *phydev)
{
}
+static inline int ethnl_cable_test_result(struct phy_device *phydev, u8 pair,
+ u16 result)
+{
+ return -ENOTSUPP;
+}
+
+static inline int ethnl_cable_test_fault_length(struct phy_device *phydev,
+ u8 pair, u16 cm)
+{
+ return -ENOTSUPP;
+}
#endif /* IS_ENABLED(ETHTOOL_NETLINK) */
#endif /* _LINUX_ETHTOOL_NETLINK_H_ */
@@ -1229,6 +1229,10 @@ int phy_start_cable_test(struct phy_device *phydev,
}
#endif
+int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result);
+int phy_cable_test_fault_length(struct phy_device *phydev, u8 pair,
+ u16 cm);
+
static inline void phy_device_reset(struct phy_device *phydev, int value)
{
mdio_device_reset(&phydev->mdio, value);
@@ -114,3 +114,50 @@ void ethnl_cable_test_finished(struct phy_device *phydev)
ethnl_multicast(phydev->skb, phydev->attached_dev);
}
EXPORT_SYMBOL_GPL(ethnl_cable_test_finished);
+
+int ethnl_cable_test_result(struct phy_device *phydev, u8 pair, u16 result)
+{
+ struct nlattr *nest;
+ int ret = -EMSGSIZE;
+
+ nest = nla_nest_start(phydev->skb, ETHTOOL_A_CABLE_TEST_NTF_RESULT);
+ if (!nest)
+ return -EMSGSIZE;
+
+ if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_PAIR, pair))
+ goto err;
+ if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_RESULT_CODE, result))
+ goto err;
+
+ nla_nest_end(phydev->skb, nest);
+ return 0;
+
+err:
+ nla_nest_cancel(phydev->skb, nest);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_result);
+
+int ethnl_cable_test_fault_length(struct phy_device *phydev, u8 pair, u32 cm)
+{
+ struct nlattr *nest;
+ int ret = -EMSGSIZE;
+
+ nest = nla_nest_start(phydev->skb,
+ ETHTOOL_A_CABLE_TEST_NTF_FAULT_LENGTH);
+ if (!nest)
+ return -EMSGSIZE;
+
+ if (nla_put_u8(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_PAIR, pair))
+ goto err;
+ if (nla_put_u16(phydev->skb, ETHTOOL_A_CABLE_FAULT_LENGTH_CM, cm))
+ goto err;
+
+ nla_nest_end(phydev->skb, nest);
+ return 0;
+
+err:
+ nla_nest_cancel(phydev->skb, nest);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ethnl_cable_test_fault_length);
The PHY drivers can use these helpers for reporting the results. The results get translated into netlink attributes which are added to the pre-allocated skbuf. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- include/linux/ethtool_netlink.h | 13 +++++++++ include/linux/phy.h | 4 +++ net/ethtool/cabletest.c | 47 +++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+)