diff mbox series

[net-next,04/15] igc: Enable NFC rules based source MAC address

Message ID 20200521072758.440264-5-jeffrey.t.kirsher@intel.com
State New
Headers show
Series 1GbE Intel Wired LAN Driver Updates 2020-05-20 | expand

Commit Message

Jeff Kirsher May 21, 2020, 7:27 a.m. UTC
From: Andre Guedes <andre.guedes@intel.com>

This patch adds support for Network Flow Classification (NFC) rules
based on source MAC address. Note that the controller doesn't support
rules with both source and destination addresses set, so this special
case is checked in igc_add_ethtool_nfc_entry().

Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 32 ++++++++++++++------
 1 file changed, 22 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 6c27046a852d..42ecb493c1a2 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1188,16 +1188,8 @@  static int igc_set_rss_hash_opt(struct igc_adapter *adapter,
 
 int igc_add_filter(struct igc_adapter *adapter, struct igc_nfc_filter *input)
 {
-	struct igc_hw *hw = &adapter->hw;
 	int err = -EINVAL;
 
-	if (hw->mac.type == igc_i225 &&
-	    !(input->filter.match_flags & ~IGC_FILTER_FLAG_SRC_MAC_ADDR)) {
-		netdev_err(adapter->netdev,
-			   "i225 doesn't support flow classification rules specifying only source addresses\n");
-		return -EOPNOTSUPP;
-	}
-
 	if (input->filter.match_flags & IGC_FILTER_FLAG_ETHER_TYPE) {
 		u16 etype = ntohs(input->filter.etype);
 
@@ -1206,6 +1198,14 @@  int igc_add_filter(struct igc_adapter *adapter, struct igc_nfc_filter *input)
 			return err;
 	}
 
+	if (input->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR) {
+		err = igc_add_mac_filter(adapter, IGC_MAC_FILTER_TYPE_SRC,
+					 input->filter.src_addr,
+					 input->action);
+		if (err)
+			return err;
+	}
+
 	if (input->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR) {
 		err = igc_add_mac_filter(adapter, IGC_MAC_FILTER_TYPE_DST,
 					 input->filter.dst_addr,
@@ -1239,6 +1239,10 @@  int igc_erase_filter(struct igc_adapter *adapter, struct igc_nfc_filter *input)
 		igc_del_vlan_prio_filter(adapter, prio);
 	}
 
+	if (input->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR)
+		igc_del_mac_filter(adapter, IGC_MAC_FILTER_TYPE_SRC,
+				   input->filter.src_addr);
+
 	if (input->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR)
 		igc_del_mac_filter(adapter, IGC_MAC_FILTER_TYPE_DST,
 				   input->filter.dst_addr);
@@ -1334,20 +1338,28 @@  static int igc_add_ethtool_nfc_entry(struct igc_adapter *adapter,
 		input->filter.match_flags = IGC_FILTER_FLAG_ETHER_TYPE;
 	}
 
-	/* Only support matching addresses by the full mask */
+	/* Both source and destination address filters only support the full
+	 * mask.
+	 */
 	if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_source)) {
 		input->filter.match_flags |= IGC_FILTER_FLAG_SRC_MAC_ADDR;
 		ether_addr_copy(input->filter.src_addr,
 				fsp->h_u.ether_spec.h_source);
 	}
 
-	/* Only support matching addresses by the full mask */
 	if (is_broadcast_ether_addr(fsp->m_u.ether_spec.h_dest)) {
 		input->filter.match_flags |= IGC_FILTER_FLAG_DST_MAC_ADDR;
 		ether_addr_copy(input->filter.dst_addr,
 				fsp->h_u.ether_spec.h_dest);
 	}
 
+	if (input->filter.match_flags & IGC_FILTER_FLAG_DST_MAC_ADDR &&
+	    input->filter.match_flags & IGC_FILTER_FLAG_SRC_MAC_ADDR) {
+		netdev_dbg(netdev, "Filters with both dst and src are not supported\n");
+		err = -EOPNOTSUPP;
+		goto err_out;
+	}
+
 	if ((fsp->flow_type & FLOW_EXT) && fsp->m_ext.vlan_tci) {
 		if (fsp->m_ext.vlan_tci != htons(VLAN_PRIO_MASK)) {
 			netdev_dbg(netdev, "VLAN mask not supported\n");