diff mbox series

[net-next,3/9] net: phy: clean up get_phy_c45_ids() failure handling

Message ID E1jlurP-0004jn-08@rmk-PC.armlinux.org.uk
State Superseded
Headers show
Series [net-next,1/9] net: phy: clean up cortina workaround | expand

Commit Message

Russell King (Oracle) June 18, 2020, 1:45 p.m. UTC 
When we decide that a PHY is not present, we do not need to go through
the hoops of setting *phy_id to 0xffffffff, and then return zero to
make get_phy_device() fail - we can return -ENODEV which will have the
same effect.

Doing so means we no longer have to pass a pointer to phy_id in, and
we can then clean up the clause 22 path in a similar way.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phy_device.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index a351eabe772f..e8dc9fcf188e 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -697,16 +697,16 @@  static int get_phy_c45_devs_in_pkg(struct mii_bus *bus, int addr, int dev_addr,
  * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs.
  * @bus: the target MII bus
  * @addr: PHY address on the MII bus
- * @phy_id: where to store the ID retrieved.
  * @c45_ids: where to store the c45 ID information.
  *
- *   If the PHY devices-in-package appears to be valid, it and the
- *   corresponding identifiers are stored in @c45_ids, zero is stored
- *   in @phy_id.  Otherwise 0xffffffff is stored in @phy_id.  Returns
- *   zero on success.
+ * Read the PHY "devices in package". If this appears to be valid, read
+ * the PHY identifiers for each device. Return the "devices in package"
+ * and identifiers in @c45_ids.
  *
+ * Returns zero on success, %-EIO on bus access error, or %-ENODEV if
+ * the "devices in package" is invalid.
  */
-static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
+static int get_phy_c45_ids(struct mii_bus *bus, int addr,
 			   struct phy_c45_device_ids *c45_ids)
 {
 	const int num_ids = ARRAY_SIZE(c45_ids->device_ids);
@@ -732,10 +732,8 @@  static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 			return -EIO;
 
 		/* no device there, let's get out of here */
-		if ((*devs & 0x1fffffff) == 0x1fffffff) {
-			*phy_id = 0xffffffff;
-			return 0;
-		}
+		if ((*devs & 0x1fffffff) == 0x1fffffff)
+			return -ENODEV;
 	}
 
 	/* Now probe Device Identifiers for each device present. */
@@ -753,7 +751,7 @@  static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id,
 			return -EIO;
 		c45_ids->device_ids[i] |= phy_reg;
 	}
-	*phy_id = 0;
+
 	return 0;
 }
 
@@ -809,7 +807,7 @@  struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
 	memset(c45_ids.device_ids, 0xff, sizeof(c45_ids.device_ids));
 
 	if (is_c45)
-		r = get_phy_c45_ids(bus, addr, &phy_id, &c45_ids);
+		r = get_phy_c45_ids(bus, addr, &c45_ids);
 	else
 		r = get_phy_c22_id(bus, addr, &phy_id);