new file mode 100644
@@ -0,0 +1,93 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Intel Ethernet Common Module
+========================
+
+The Intel Ethernet Common Module is meant to serve as an abstraction layer
+between device specific implementation details and common net device driver
+flows. This library provides several function hooks which allow a device driver
+to specify register addresses, control queue communications, and other device
+specific functionality. Some functions are required to be implemented while
+others have a default implementation that is used when none is supplied by the
+device driver. Doing this, a device driver can be written to take advantage
+of existing code while also giving the flexibility to implement device specific
+features.
+
+The common use case for this library is for a network device driver that wants
+specify its own device specific details but also leverage the more common
+code flows found in network device drivers.
+
+Sections in this document:
+ Entry Point
+ Exit Point
+ Register Operations API
+ Virtchnl Operations API
+
+Entry Point
+~~~~~~~~~~~
+The primary entry point to the library is the iecm_probe function. Prior to
+calling this, device drivers must have allocated an iecm_adapter struct and
+initialized it with the required API functions. The adapter struct, along with
+the pci_dev struct and the pci_device_id struct, is provided to iecm_probe
+which finalizes device initialization and prepares the device for open.
+
+The iecm_dev_ops struct within the iecm_adapter struct is the primary vehicle
+for passing information from device drivers to the common module. A dependent
+module must define and assign a reg_ops_init function which will assign the
+respective function pointers to initialize register values (see iecm_reg_ops
+struct). These are required to be provided by the dependent device driver as
+no suitable default can be assumed for register addresses.
+
+The vc_ops_init function pointer and the related iecm_virtchnl_ops struct are
+optional and should only be necessary for device drivers which use a different
+method/timing for communicating across a mailbox to the hardware. Within iecm
+is a default interface provided in the case where one is not provided by the
+device driver.
+
+Exit Point
+~~~~~~~~~~
+When the device driver is being prepared to be removed through the pci_driver
+remove callback, it is required for the device driver to call iecm_remove with
+the pci_dev struct provided. This is required to ensure all resources are
+properly freed and returned to the operating system.
+
+Register Operations API
+~~~~~~~~~~~~~~~~~~~~~~~
+iecm_reg_ops contains three different function pointers relating to initializing
+registers for the specific net device using the library.
+
+ctlq_reg_init relates specifically to setting up registers related to control
+queue/mailbox communications. Registers that should be defined include: head,
+tail, len, bah, bal, len_mask, len_ena_mask, and head_mask.
+
+vportq_reg_init relates to setting up queue registers. The tail registers to
+be assigned to the iecm_queue struct for each RX/TX queue.
+
+intr_reg_init relates to any registers needed to setup interrupts. These
+include registers needed to enable the interrupt and change ITR settings.
+
+If the initialization function finds that one or more required function
+pointers were not provided, an error will be issued and the device will be
+inoperable.
+
+
+Virtchnl Operations API
+~~~~~~~~~~~~~~~~~~~~~~~
+The virtchnl is a conduit between driver and hardware that allows device
+drivers to send and receive control messages to/from hardware. This is
+optional to be specified as there is a general interface that can be assumed
+when using this library. However, if a device deviates in some way to
+communicate across the mailbox correctly, this interface is provided to allow
+that.
+
+If vc_ops_init is set in the dev_ops field of the iecm_adapter struct, then it
+is assumed the device driver is using providing it's own interface to do
+virtchnl communications. While providing vc_ops_init is optional, if it is
+provided, it is required that the device driver provide function pointers for
+those functions in vc_ops, with exception for the enable_vport, disable_vport,
+and destroy_vport functions which may not be required for all devices.
+
+If the initialization function finds that vc_ops_init was defined but one or
+more required function pointers were not provided, an error will be issued and
+the device will be inoperable.
@@ -8654,6 +8654,7 @@ F: Documentation/networking/device_drivers/intel/fm10k.rst
F: Documentation/networking/device_drivers/intel/i40e.rst
F: Documentation/networking/device_drivers/intel/iavf.rst
F: Documentation/networking/device_drivers/intel/ice.rst
+F: Documentation/networking/device_drivers/intel/iecm.rst
F: Documentation/networking/device_drivers/intel/igb.rst
F: Documentation/networking/device_drivers/intel/igbvf.rst
F: Documentation/networking/device_drivers/intel/ixgb.rst
@@ -8662,6 +8663,7 @@ F: Documentation/networking/device_drivers/intel/ixgbevf.rst
F: drivers/net/ethernet/intel/
F: drivers/net/ethernet/intel/*/
F: include/linux/avf/virtchnl.h
+F: include/linux/net/intel/
INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
M: Maik Broemme <mbroemme@libmpq.org>
@@ -342,4 +342,11 @@ config IGC
To compile this driver as a module, choose M here. The module
will be called igc.
+config IECM
+ tristate "Intel(R) Ethernet Common Module Support"
+ default n
+ depends on PCI
+ help
+ To compile this driver as a module, choose M here. The module
+ will be called iecm. MSI-X interrupt support is required
endif # NET_VENDOR_INTEL
@@ -16,3 +16,4 @@ obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IAVF) += iavf/
obj-$(CONFIG_FM10K) += fm10k/
obj-$(CONFIG_ICE) += ice/
+obj-$(CONFIG_IECM) += iecm/
new file mode 100644
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0-only
+# Copyright (C) 2020 Intel Corporation
+
+#
+# Makefile for the Intel(R) Ethernet Common Module
+#
+
+obj-$(CONFIG_IECM) += iecm.o
+
+iecm-y := \
+ iecm_lib.o \
+ iecm_virtchnl.o \
+ iecm_txrx.o \
+ iecm_singleq_txrx.o \
+ iecm_ethtool.o \
+ iecm_controlq.o \
+ iecm_osdep.o \
+ iecm_controlq_setup.o \
+ iecm_main.o