@@ -190,6 +190,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
.uart_pin_workaround = true,
.tx_stats_over_pktlog = false,
.bmi_large_size_download = true,
+ .start_retry = ATH10K_START_RETRY,
},
{
.id = QCA6174_HW_2_1_VERSION,
@@ -82,6 +82,8 @@
/* Default Airtime weight multipler (Tuned for multiclient performance) */
#define ATH10K_AIRTIME_WEIGHT_MULTIPLIER 4
+#define ATH10K_START_RETRY 10
+
struct ath10k;
static inline const char *ath10k_bus_str(enum ath10k_bus bus)
@@ -623,6 +623,8 @@ struct ath10k_hw_params {
/* tx stats support over pktlog */
bool tx_stats_over_pktlog;
+
+ u32 start_retry;
};
struct htt_rx_desc;
@@ -4814,7 +4814,7 @@ int ath10k_mac_rfkill_enable_radio(struct ath10k *ar, bool enable)
return 0;
}
-static int ath10k_start(struct ieee80211_hw *hw)
+static int __ath10k_start(struct ieee80211_hw *hw)
{
struct ath10k *ar = hw->priv;
u32 param;
@@ -5030,6 +5030,27 @@ static int ath10k_start(struct ieee80211_hw *hw)
return ret;
}
+static int ath10k_start(struct ieee80211_hw *hw)
+{
+ struct ath10k *ar = hw->priv;
+ int ret, loop = ar->hw_params.start_retry + 1;
+ enum ath10k_state state = ar->state;
+
+ while (loop != 0) {
+ ar->state = state;
+ ret = __ath10k_start(hw);
+ loop--;
+
+ if (ret)
+ ath10k_warn(ar, "failed to start, loops: %d, ret: %d\n",
+ loop, ret);
+ else
+ break;
+ }
+
+ return ret;
+}
+
static void ath10k_stop(struct ieee80211_hw *hw)
{
struct ath10k *ar = hw->priv;
When simulate random transfer fail for sdio write and read, it happened "Could not init core: -110" and then wlan up fail. Test steps: 1. Add config and update kernel: CONFIG_FAIL_MMC_REQUEST=y CONFIG_FAULT_INJECTION=y CONFIG_FAULT_INJECTION_DEBUG_FS=y 2. Run simulate fail: cd /sys/kernel/debug/mmc1/fail_mmc_request echo 100 > probability echo 1000 > interval echo 1 > times && enter system suspend press power button to wakeup system 3. It happened Could not init core: -110. [ 66.432068] ath10k_sdio mmc1:0001:1: unable to send the bmi data to the device: -110 [ 66.440012] ath10k_sdio mmc1:0001:1: unable to write to the device [ 66.453375] ath10k_sdio mmc1:0001:1: Could not init core: -110 [ 66.653371] Hardware became unavailable upon resume. This could be a software issue prior to suspend or a hardware issue. [ 66.999651] Workqueue: events_unbound async_run_entry_fn [ 67.004965] pstate: 60000005 (nZCv daif -PAN -UAO) [ 67.009799] pc : ieee80211_reconfig+0x630/0x19a4 [mac80211] [ 67.015413] lr : ieee80211_reconfig+0x630/0x19a4 [mac80211] [ 67.020979] sp : ffffff800d593bb0 [ 67.024290] x29: ffffff800d593c30 x28: ffffff9169a11f80 [ 67.029602] x27: ffffff91696d2018 x26: 0000000000000001 [ 67.034915] x25: 00000000ffffff92 x24: ffffff9169a11f80 [ 67.040228] x23: 0000000000000010 x22: ffffff91696d2018 [ 67.045540] x21: ffffff9169a11f80 x20: 0000000000000000 [ 67.050853] x19: ffffffc9aeaa0800 x18: 0000000000000000 [ 67.056165] x17: 000000000000003c x16: ffffff91691b970c [ 67.061477] x15: 0000000000000006 x14: ffff001000000600 [ 67.066790] x13: 000000000001a28e x12: 0000000000000000 [ 67.072102] x11: 0000000000000000 x10: 0000000000000000 [ 67.077415] x9 : c7b378ecef004f00 x8 : c7b378ecef004f00 [ 67.082728] x7 : 0000000000000000 x6 : ffffff9169b66d2a [ 67.088041] x5 : 0000000000000000 x4 : 0000000000000000 [ 67.093353] x3 : 00000000000188a2 x2 : ffffffc9bff05918 [ 67.098666] x1 : ffffffc9bfefca08 x0 : 000000000000006d [ 67.103979] Call trace: [ 67.106470] ieee80211_reconfig+0x630/0x19a4 [mac80211] [ 67.111736] ieee80211_resume+0x34/0x68 [mac80211] [ 67.116586] wiphy_resume+0x118/0x1d4 [cfg80211] [ 67.121205] dpm_run_callback+0xe8/0x1e4 [ 67.125128] device_resume+0x1f4/0x228 [ 67.128876] async_resume+0x28/0x58 [ 67.132362] async_run_entry_fn+0x48/0xf8 [ 67.136374] process_one_work+0x210/0x410 [ 67.140382] worker_thread+0x234/0x3dc [ 67.144132] kthread+0x120/0x130 [ 67.147361] ret_from_fork+0x10/0x18 [ 67.150933] ---[ end trace 65dc48ed6f2300f6 ]--- [ 67.156216] ------------[ cut here ]------------ [ 67.160881] wlan0: Failed check-sdata-in-driver check, flags: 0x0 [ 67.167222] WARNING: CPU: 5 PID: 991 at /mnt/host/source/src/third_party/kernel/v4.19/net/mac80211/driver-ops.h:19 drv_remove_interface+0x1a8/0x1c0 [mac80211] [ 67.251884] zram cfg80211 joydev [ 67.255206] CPU: 5 PID: 991 Comm: kworker/u16:3 Tainted: G W 4.19.86 #67 [ 67.263201] Hardware name: MediaTek krane sku0 board (DT) [ 67.268606] Workqueue: events_unbound async_run_entry_fn [ 67.273914] pstate: 60000005 (nZCv daif -PAN -UAO) [ 67.278720] pc : drv_remove_interface+0x1a8/0x1c0 [mac80211] [ 67.284394] lr : drv_remove_interface+0x1a8/0x1c0 [mac80211] [ 67.290045] sp : ffffff800d593990 [ 67.293353] x29: ffffff800d5939c0 x28: 0000000000000030 [ 67.298660] x27: ffffffc9ae8fd4a8 x26: 0000000000000000 [ 67.303967] x25: 0000000000000000 x24: ffffffc9aeaa0c48 [ 67.309274] x23: 0000000000000000 x22: ffffffc9aeaa1348 [ 67.314581] x21: ffffffc9aeaa07a0 x20: ffffffc9ae8fc900 [ 67.319887] x19: ffffffc9aeaa0800 x18: 0000000000000000 [ 67.325194] x17: 000000000000003c x16: ffffff91691b970c [ 67.330501] x15: 0000000000000006 x14: ffff001000000600 [ 67.335808] x13: 000000000001a2bc x12: 0000000000000000 [ 67.341114] x11: 0000000000000000 x10: 0000000000000000 [ 67.346420] x9 : c7b378ecef004f00 x8 : c7b378ecef004f00 [ 67.351727] x7 : 0000000000000000 x6 : ffffff9169b66d1e [ 67.357033] x5 : 0000000000000000 x4 : 0000000000000000 [ 67.362339] x3 : 0000000000017285 x2 : ffffffc9bff65918 [ 67.367645] x1 : ffffffc9bff5ca08 x0 : 0000000000000036 [ 67.372953] Call trace: [ 67.375417] drv_remove_interface+0x1a8/0x1c0 [mac80211] [ 67.380749] ieee80211_do_stop+0x620/0x6f8 [mac80211] [ 67.385822] ieee80211_stop+0x20/0x30 [mac80211] [ 67.390439] __dev_close_many+0xb8/0x11c [ 67.394357] dev_close_many+0x70/0x100 [ 67.398101] dev_close+0x4c/0x80 [ 67.401354] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211] [ 67.407554] ieee80211_handle_reconfig_failure+0x90/0x9c [mac80211] [ 67.413839] ieee80211_reconfig+0x18dc/0x19a4 [mac80211] [ 67.419171] ieee80211_resume+0x34/0x68 [mac80211] [ 67.423974] wiphy_resume+0x118/0x1d4 [cfg80211] [ 67.428590] dpm_run_callback+0xe8/0x1e4 [ 67.432509] device_resume+0x1f4/0x228 [ 67.436253] async_resume+0x28/0x58 [ 67.439735] async_run_entry_fn+0x48/0xf8 [ 67.443742] process_one_work+0x210/0x410 [ 67.447746] worker_thread+0x234/0x3dc [ 67.451489] kthread+0x120/0x130 [ 67.454716] ret_from_fork+0x10/0x18 [ 67.458286] ---[ end trace 65dc48ed6f2300f7 ]--- [ 67.462952] ------------[ cut here ]------------ [ 67.467648] WARNING: CPU: 5 PID: 991 at /mnt/host/source/src/third_party/kernel/v4.19/net/mac80211/driver-ops.c:39 drv_stop+0x1cc/0x1e4 [mac80211] [ 67.554573] CPU: 5 PID: 991 Comm: kworker/u16:3 Tainted: G W 4.19.86 #67 [ 67.562566] Hardware name: MediaTek krane sku0 board (DT) [ 67.567959] Workqueue: events_unbound async_run_entry_fn [ 67.573266] pstate: 60000005 (nZCv daif -PAN -UAO) [ 67.578071] pc : drv_stop+0x1cc/0x1e4 [mac80211] [ 67.582704] lr : drv_stop+0x1cc/0x1e4 [mac80211] [ 67.587313] sp : ffffff800d593970 [ 67.590620] x29: ffffff800d5939a0 x28: 0000000000000030 [ 67.595927] x27: ffffffc9ae8fd4a8 x26: 0000000000000000 [ 67.601233] x25: 0000000000000000 x24: ffffffc9aeaa0c48 [ 67.606540] x23: 0000000000000000 x22: ffffffc9aeaa1348 [ 67.611846] x21: ffffffc9aeaa07a0 x20: ffffffc9ae8fc900 [ 67.617153] x19: ffffffc9aeaa0800 x18: 0000000000000000 [ 67.622460] x17: 000000000000003c x16: ffffff91691b970c [ 67.627767] x15: 0000000000000006 x14: ffff001000000600 [ 67.633074] x13: 000000000001a358 x12: 0000000000000000 [ 67.638380] x11: 0000000000000000 x10: 0000000000000000 [ 67.643686] x9 : c7b378ecef004f00 x8 : c7b378ecef004f00 [ 67.648992] x7 : 0000000000000000 x6 : ffffff9169b66d0c [ 67.654300] x5 : 0000000000000000 x4 : 0000000000000000 [ 67.659606] x3 : 0000000000016529 x2 : ffffffc9bff65918 [ 67.664913] x1 : ffffffc9bff5ca08 x0 : 0000000000000024 [ 67.670219] Call trace: [ 67.672681] drv_stop+0x1cc/0x1e4 [mac80211] [ 67.676971] ieee80211_stop_device+0x48/0x54 [mac80211] [ 67.682215] ieee80211_do_stop+0x678/0x6f8 [mac80211] [ 67.687286] ieee80211_stop+0x20/0x30 [mac80211] [ 67.691898] __dev_close_many+0xb8/0x11c [ 67.695816] dev_close_many+0x70/0x100 [ 67.699559] dev_close+0x4c/0x80 [ 67.702798] cfg80211_shutdown_all_interfaces+0x50/0xcc [cfg80211] [ 67.708997] ieee80211_handle_reconfig_failure+0x90/0x9c [mac80211] [ 67.715283] ieee80211_reconfig+0x18dc/0x19a4 [mac80211] [ 67.720615] ieee80211_resume+0x34/0x68 [mac80211] [ 67.725417] wiphy_resume+0x118/0x1d4 [cfg80211] [ 67.730030] dpm_run_callback+0xe8/0x1e4 [ 67.733947] device_resume+0x1f4/0x228 [ 67.737690] async_resume+0x28/0x58 [ 67.741173] async_run_entry_fn+0x48/0xf8 [ 67.745178] process_one_work+0x210/0x410 [ 67.749183] worker_thread+0x234/0x3dc [ 67.752925] kthread+0x120/0x130 [ 67.756149] ret_from_fork+0x10/0x18 [ 67.759717] ---[ end trace 65dc48ed6f2300f8 ]--- [ 67.767629] dpm_run_callback(): wiphy_resume+0x0/0x1d4 [cfg80211] returns -110 [ 67.774896] ieee80211 phy0: wiphy_resume+0x0/0x1d4 [cfg80211] returned -110 after 1777898 usecs Add retry mechanism for ath10k_start to make sure wlan up success. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00029. Tested with QCA6174 PCIe with firmware WLAN.RM.4.4.1-00110-QCARMSWP-1. Tested with QCA9984 PCIe with firmware 10.4-3.9.0.2-00046. Tested with QCA9988 PCIe with firmware 10.4-3.9.0.2-00070. Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 1 + drivers/net/wireless/ath/ath10k/core.h | 2 ++ drivers/net/wireless/ath/ath10k/hw.h | 2 ++ drivers/net/wireless/ath/ath10k/mac.c | 23 ++++++++++++++++++++++- 4 files changed, 27 insertions(+), 1 deletion(-)