@@ -2,6 +2,8 @@
/* Copyright(c) 2018-2019 Realtek Corporation
*/
+#include <linux/iopoll.h>
+
#include "main.h"
#include "coex.h"
#include "fw.h"
@@ -193,8 +195,8 @@ static void rtw_fw_send_h2c_command(struct rtw_dev *rtwdev,
u8 box;
u8 box_state;
u32 box_reg, box_ex_reg;
- u32 h2c_wait;
int idx;
+ int ret;
rtw_dbg(rtwdev, RTW_DBG_FW,
"send H2C content %02x%02x%02x%02x %02x%02x%02x%02x\n",
@@ -226,12 +228,10 @@ static void rtw_fw_send_h2c_command(struct rtw_dev *rtwdev,
goto out;
}
- h2c_wait = 20;
- do {
- box_state = rtw_read8(rtwdev, REG_HMETFR);
- } while ((box_state >> box) & 0x1 && --h2c_wait > 0);
+ ret = readx_poll_timeout(rr8, REG_HMETFR, box_state,
+ !((box_state >> box) & 0x1), 100, 3000);
- if (!h2c_wait) {
+ if (ret) {
rtw_err(rtwdev, "failed to send h2c command\n");
goto out;
}
@@ -253,6 +253,10 @@ rtw_write8_mask(struct rtw_dev *rtwdev, u32 addr, u32 mask, u8 data)
rtw_write8(rtwdev, addr, set);
}
+#define rr8(addr) rtw_read8(rtwdev, addr)
+#define rr16(addr) rtw_read16(rtwdev, addr)
+#define rr32(addr) rtw_read32(rtwdev, addr)
+
static inline enum rtw_hci_type rtw_hci_type(struct rtw_dev *rtwdev)
{
return rtwdev->hci.type;
On some systems we can constanly see rtw88 complains: [39584.721375] rtw_pci 0000:03:00.0: failed to send h2c command Increase interval of each check to wait the status bit really changes. While at it, add some helpers so we can use standarized readx_poll_timeout() macro. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> --- drivers/net/wireless/realtek/rtw88/fw.c | 12 ++++++------ drivers/net/wireless/realtek/rtw88/hci.h | 4 ++++ 2 files changed, 10 insertions(+), 6 deletions(-)