@@ -413,8 +413,8 @@ static inline void acerhdf_enable_kernelmode(void)
* the temperature and the fan.
* disabled: the BIOS takes control of the fan.
*/
-static int acerhdf_set_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode mode)
+static int acerhdf_change_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
{
if (mode == THERMAL_DEVICE_DISABLED && kernelmode)
acerhdf_revert_to_bios_mode();
@@ -473,7 +473,7 @@ static struct thermal_zone_device_ops acerhdf_dev_ops = {
.bind = acerhdf_bind,
.unbind = acerhdf_unbind,
.get_temp = acerhdf_get_ec_temp,
- .set_mode = acerhdf_set_mode,
+ .change_mode = acerhdf_change_mode,
.get_trip_type = acerhdf_get_trip_type,
.get_trip_hyst = acerhdf_get_trip_hyst,
.get_trip_temp = acerhdf_get_trip_temp,
@@ -330,8 +330,8 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
return 0;
}
-static int imx_set_mode(struct thermal_zone_device *tz,
- enum thermal_device_mode mode)
+static int imx_change_mode(struct thermal_zone_device *tz,
+ enum thermal_device_mode mode)
{
struct imx_thermal_data *data = tz->devdata;
struct regmap *map = data->tempmon;
@@ -447,7 +447,7 @@ static struct thermal_zone_device_ops imx_tz_ops = {
.bind = imx_bind,
.unbind = imx_unbind,
.get_temp = imx_get_temp,
- .set_mode = imx_set_mode,
+ .change_mode = imx_change_mode,
.get_trip_type = imx_get_trip_type,
.get_trip_temp = imx_get_trip_temp,
.get_crit_temp = imx_get_crit_temp,
@@ -860,7 +860,7 @@ static int __maybe_unused imx_thermal_suspend(struct device *dev)
* Need to disable thermal sensor, otherwise, when thermal core
* try to get temperature before thermal sensor resume, a wrong
* temperature will be read as the thermal sensor is powered
- * down. This is done in set_mode() operation called from
+ * down. This is done in change_mode() operation called from
* thermal_zone_device_disable()
*/
ret = thermal_zone_device_disable(data->tz);
@@ -377,8 +377,8 @@ static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
return 0;
}
-static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
- enum thermal_device_mode mode)
+static int int3400_thermal_change_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
{
struct int3400_thermal_priv *priv = thermal->devdata;
int result = 0;
@@ -399,7 +399,7 @@ static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
static struct thermal_zone_device_ops int3400_thermal_ops = {
.get_temp = int3400_thermal_get_temp,
- .set_mode = int3400_thermal_set_mode,
+ .change_mode = int3400_thermal_change_mode,
};
static struct thermal_zone_params int3400_thermal_params = {
@@ -298,8 +298,8 @@ static int sys_get_curr_temp(struct thermal_zone_device *tzd,
return 0;
}
-static int sys_set_mode(struct thermal_zone_device *tzd,
- enum thermal_device_mode mode)
+static int sys_change_mode(struct thermal_zone_device *tzd,
+ enum thermal_device_mode mode)
{
int ret;
@@ -319,7 +319,7 @@ static struct thermal_zone_device_ops tzone_ops = {
.get_trip_type = sys_get_trip_type,
.set_trip_temp = sys_set_trip_temp,
.get_crit_temp = sys_get_crit_temp,
- .set_mode = sys_set_mode,
+ .change_mode = sys_change_mode,
};
static void free_soc_dts(struct soc_sensor_entry *aux_entry)
@@ -482,8 +482,8 @@ int thermal_zone_device_set_mode(struct thermal_zone_device *tz,
return ret;
}
- if (tz->ops->set_mode)
- ret = tz->ops->set_mode(tz, mode);
+ if (tz->ops->change_mode)
+ ret = tz->ops->change_mode(tz, mode);
if (!ret)
tz->mode = mode;
@@ -76,7 +76,7 @@ struct thermal_zone_device_ops {
struct thermal_cooling_device *);
int (*get_temp) (struct thermal_zone_device *, int *);
int (*set_trips) (struct thermal_zone_device *, int, int);
- int (*set_mode) (struct thermal_zone_device *,
+ int (*change_mode) (struct thermal_zone_device *,
enum thermal_device_mode);
int (*get_trip_type) (struct thermal_zone_device *, int,
enum thermal_trip_type *);
set_mode() is only called when tzd's mode is about to change. Actual setting is performed in thermal_core, in thermal_zone_device_set_mode(). The meaning of set_mode() callback is actually to notify the driver about the mode being changed and giving the driver a chance to oppose such change. To better reflect the purpose of the method rename it to change_mode() Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> --- drivers/platform/x86/acerhdf.c | 6 +++--- drivers/thermal/imx_thermal.c | 8 ++++---- drivers/thermal/intel/int340x_thermal/int3400_thermal.c | 6 +++--- drivers/thermal/intel/intel_quark_dts_thermal.c | 6 +++--- drivers/thermal/thermal_core.c | 4 ++-- include/linux/thermal.h | 2 +- 6 files changed, 16 insertions(+), 16 deletions(-)