| Message ID | 20200505130618.554-5-wan.ahmad.zainie.wan.mohamad@intel.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | spi: dw: Add support for Intel Keem Bay SPI | expand |
diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt index 3ed08ee9feba..2ead46b633ea 100644 --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -2,7 +2,7 @@ Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. Required properties: - compatible : "snps,dw-apb-ssi" or "mscc,<soc>-spi", where soc is "ocelot" or - "jaguar2", or "amazon,alpine-dw-apb-ssi" + "jaguar2", or "amazon,alpine-dw-apb-ssi", or "snps,dwc-ssi-1.01a" - reg : The register base for the controller. For "mscc,<soc>-spi", a second register set is required (named ICPU_CFG:SPI_MST) - interrupts : One interrupt, used by the controller.
This patch adds compatible string "snps,dwc-ssi-1.01a" to the above DT binding document, to provide support for DesignWare DWC_ssi IP [1]. Current driver supports DW_apb_ssi IP [2]. References: [1] https://www.synopsys.com/dw/ipdir.php?c=dwc_ssi [2] https://www.synopsys.com/dw/ipdir.php?c=DW_apb_ssi Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com> --- Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)