@@ -154,10 +154,10 @@ struct s3c24xx_uart_port {
#define portaddrl(port, reg) \
((unsigned long *)(unsigned long)((port)->membase + (reg)))
-#define rd_regb(port, reg) (readb_relaxed(portaddr(port, reg)))
+#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
#define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
-#define wr_regb(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
+#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
#define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
/* Byte-order aware bit setting/clearing functions. */
@@ -714,7 +714,7 @@ static void s3c24xx_serial_rx_drain_fifo(struct s3c24xx_uart_port *ourport)
fifocnt--;
uerstat = rd_regl(port, S3C2410_UERSTAT);
- ch = rd_regb(port, S3C2410_URXH);
+ ch = rd_reg(port, S3C2410_URXH);
if (port->flags & UPF_CONS_FLOW) {
int txe = s3c24xx_serial_txempty_nofifo(port);
@@ -826,7 +826,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
}
if (port->x_char) {
- wr_regb(port, S3C2410_UTXH, port->x_char);
+ wr_reg(port, S3C2410_UTXH, port->x_char);
port->icount.tx++;
port->x_char = 0;
goto out;
@@ -852,7 +852,7 @@ static irqreturn_t s3c24xx_serial_tx_chars(int irq, void *id)
if (rd_regl(port, S3C2410_UFSTAT) & ourport->info->tx_fifofull)
break;
- wr_regb(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
+ wr_reg(port, S3C2410_UTXH, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
count--;
@@ -916,7 +916,7 @@ static unsigned int s3c24xx_serial_tx_empty(struct uart_port *port)
/* no modem control lines */
static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
{
- unsigned int umstat = rd_regb(port, S3C2410_UMSTAT);
+ unsigned int umstat = rd_reg(port, S3C2410_UMSTAT);
if (umstat & S3C2410_UMSTAT_CTS)
return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
@@ -2185,7 +2185,7 @@ static int s3c24xx_serial_get_poll_char(struct uart_port *port)
if (s3c24xx_serial_rx_fifocnt(ourport, ufstat) == 0)
return NO_POLL_CHAR;
- return rd_regb(port, S3C2410_URXH);
+ return rd_reg(port, S3C2410_URXH);
}
static void s3c24xx_serial_put_poll_char(struct uart_port *port,
@@ -2200,7 +2200,7 @@ static void s3c24xx_serial_put_poll_char(struct uart_port *port,
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(port, S3C2410_UTXH, c);
+ wr_reg(port, S3C2410_UTXH, c);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -2212,7 +2212,7 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
while (!s3c24xx_serial_console_txrdy(port, ufcon))
cpu_relax();
- wr_regb(port, S3C2410_UTXH, ch);
+ wr_reg(port, S3C2410_UTXH, ch);
}
static void
This patch change the name of macro for general usage. Signed-off-by: Hyunki Koo <hyunki00.koo@samsung.com> --- drivers/tty/serial/samsung_tty.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)