@@ -502,20 +502,27 @@ config SERIAL_IMX
can enable its onboard serial port by enabling this option.
config SERIAL_IMX_CONSOLE
- bool "Console on IMX serial port"
- depends on SERIAL_IMX=y
+ tristate "Console on IMX serial port"
+ depends on SERIAL_IMX
select SERIAL_CORE_CONSOLE
- select SERIAL_EARLYCON if OF
help
If you have enabled the serial port on the Freescale IMX
- CPU you can make it the console by answering Y to this option.
+ CPU you can make it the console by answering Y/M to this option.
- Even if you say Y here, the currently visible virtual console
+ Even if you say Y/M here, the currently visible virtual console
(/dev/tty0) will still be used as the system console by default, but
you can alter that using a kernel command line option such as
"console=ttymxc0". (Try "man bootparam" or see the documentation of
your bootloader about how to pass options to the kernel at boot time.)
+config SERIAL_IMX_EARLYCON
+ bool "Earlycon on IMX serial port"
+ depends OF
+ select SERIAL_EARLYCON if OF
+ help
+ If you have enabled the earlycon on the Freescale IMX
+ CPU you can make it the earlycon by answering Y to this option.
+
config SERIAL_UARTLITE
tristate "Xilinx uartlite serial port support"
depends on HAS_IOMEM
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
obj-$(CONFIG_SERIAL_IMX) += imx.o
+obj-$(CONFIG_SERIAL_IMX_EARLYCON) += imx_earlycon.o
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
obj-$(CONFIG_SERIAL_ICOM) += icom.o
obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
@@ -361,7 +361,7 @@ static inline int imx_uart_is_imx6q(struct imx_port *sport)
/*
* Save and restore functions for UCR1, UCR2 and UCR3 registers
*/
-#if defined(CONFIG_SERIAL_IMX_CONSOLE)
+#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE)
static void imx_uart_ucrs_save(struct imx_port *sport,
struct imx_port_ucrs *ucr)
{
@@ -1913,7 +1913,7 @@ static const struct uart_ops imx_uart_pops = {
static struct imx_port *imx_uart_ports[UART_NR];
-#ifdef CONFIG_SERIAL_IMX_CONSOLE
+#if IS_ENABLED(CONFIG_SERIAL_IMX_CONSOLE)
static void imx_uart_console_putchar(struct uart_port *port, int ch)
{
struct imx_port *sport = (struct imx_port *)port;
@@ -2110,39 +2110,6 @@ static struct console imx_uart_console = {
#define IMX_CONSOLE &imx_uart_console
-#ifdef CONFIG_OF
-static void imx_uart_console_early_putchar(struct uart_port *port, int ch)
-{
- struct imx_port *sport = (struct imx_port *)port;
-
- while (imx_uart_readl(sport, IMX21_UTS) & UTS_TXFULL)
- cpu_relax();
-
- imx_uart_writel(sport, ch, URTX0);
-}
-
-static void imx_uart_console_early_write(struct console *con, const char *s,
- unsigned count)
-{
- struct earlycon_device *dev = con->data;
-
- uart_console_write(&dev->port, s, count, imx_uart_console_early_putchar);
-}
-
-static int __init
-imx_console_early_setup(struct earlycon_device *dev, const char *opt)
-{
- if (!dev->port.membase)
- return -ENODEV;
-
- dev->con->write = imx_uart_console_early_write;
-
- return 0;
-}
-OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup);
-OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup);
-#endif
-
#else
#define IMX_CONSOLE NULL
#endif
new file mode 100644
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2020 NXP
+ */
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/io.h>
+
+#define URTX0 0x40 /* Transmitter Register */
+#define UTS_TXFULL (1<<4) /* TxFIFO full */
+#define IMX21_UTS 0xb4 /* UART Test Register on all other i.mx*/
+
+static void imx_uart_console_early_putchar(struct uart_port *port, int ch)
+{
+ while (readl_relaxed(port->membase + IMX21_UTS) & UTS_TXFULL)
+ cpu_relax();
+
+ writel_relaxed(ch, port->membase + URTX0);
+}
+
+static void imx_uart_console_early_write(struct console *con, const char *s,
+ unsigned count)
+{
+ struct earlycon_device *dev = con->data;
+
+ uart_console_write(&dev->port, s, count, imx_uart_console_early_putchar);
+}
+
+static int __init
+imx_console_early_setup(struct earlycon_device *dev, const char *opt)
+{
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ dev->con->write = imx_uart_console_early_write;
+
+ return 0;
+}
+OF_EARLYCON_DECLARE(ec_imx6q, "fsl,imx6q-uart", imx_console_early_setup);
+OF_EARLYCON_DECLARE(ec_imx21, "fsl,imx21-uart", imx_console_early_setup);
+
+MODULE_AUTHOR("NXP");
+MODULE_DESCRIPTION("IMX earlycon driver");
+MODULE_LICENSE("GPL");
GKI kernel requires drivers built as modules including console driver, so add the support that imx serial console driver can be built as module. The changes of the patch: - imx console driver can be built as module. - move out earlycon code to separated driver like imx_earlycon.c, and imx earlycon driver only support build-in. Signed-off-by: Fugang Duan <fugang.duan@nxp.com> --- drivers/tty/serial/Kconfig | 17 +++++++---- drivers/tty/serial/Makefile | 1 + drivers/tty/serial/imx.c | 37 ++--------------------- drivers/tty/serial/imx_earlycon.c | 50 +++++++++++++++++++++++++++++++ 4 files changed, 65 insertions(+), 40 deletions(-)