@@ -23,7 +23,7 @@ aliases {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 0>;
+ pwms = <&pwm 0 50000 PWM_POLARITY_NORMAL>;
brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>;
default-brightness-level = <2>;
enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */
@@ -21,7 +21,7 @@ aliases {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm 0 50000 0>;
+ pwms = <&pwm 0 50000 PWM_POLARITY_NORMAL>;
power-supply = <®_dcdc1>;
brightness-levels = <0 5 7 10 14 20 28 40 56 80 112>;
default-brightness-level = <5>;
@@ -356,7 +356,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ab 0 30518 0>; /* PWM_A at 32.768KHz */
+ /* PWM_A at 32.768KHz */
+ pwms = <&pwm_ab 0 30518 PWM_POLARITY_NORMAL>;
};
};
@@ -10,6 +10,7 @@
#include <dt-bindings/gpio/meson-axg-gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h>
#include <dt-bindings/reset/amlogic,meson-axg-reset.h>
@@ -9,6 +9,7 @@
#include <dt-bindings/clock/g12a-aoclkc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/reset/amlogic,meson-g12a-reset.h>
#include <dt-bindings/thermal/thermal.h>
@@ -141,7 +141,7 @@ vddcpu: regulator-vddcpu {
vin-supply = <&dc_in>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -176,7 +176,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sound {
@@ -141,7 +141,7 @@ vddcpu: regulator-vddcpu {
vin-supply = <&main_12v>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -141,7 +141,7 @@ vddcpu: regulator-vddcpu {
vin-supply = <&dc_in>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -232,7 +232,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
};
@@ -20,7 +20,7 @@ vddcpu_a: regulator-vddcpu-a {
vin-supply = <&dc_in>;
- pwms = <&pwm_ab 0 1250 0>;
+ pwms = <&pwm_ab 0 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -39,7 +39,7 @@ vddcpu_b: regulator-vddcpu-b {
vin-supply = <&vsys_3v3>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -127,7 +127,7 @@ vddcpu_a: regulator-vddcpu-a {
vin-supply = <&main_12v>;
- pwms = <&pwm_ab 0 1250 0>;
+ pwms = <&pwm_ab 0 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -146,7 +146,7 @@ vddcpu_b: regulator-vddcpu-b {
vin-supply = <&main_12v>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -109,7 +109,7 @@ vddcpu_a: regulator-vddcpu-a {
vin-supply = <&main_12v>;
- pwms = <&pwm_ab 0 1250 0>;
+ pwms = <&pwm_ab 0 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -128,7 +128,7 @@ vddcpu_b: regulator-vddcpu-b {
vin-supply = <&main_12v>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -282,7 +282,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
};
@@ -72,7 +72,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -12,6 +12,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
interrupt-parent = <&gic>;
@@ -79,7 +79,8 @@ wifi_32k: wifi-32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -109,7 +109,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -83,7 +83,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -77,7 +77,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
hdmi-connector {
@@ -82,7 +82,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -93,7 +93,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -72,7 +72,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -47,7 +47,7 @@ pwmleds {
power {
label = "vim:red:power";
- pwms = <&pwm_AO_ab 1 7812500 0>;
+ pwms = <&pwm_AO_ab 1 7812500 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
@@ -72,7 +72,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -76,7 +76,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -87,7 +87,7 @@ pwmleds {
power {
label = "vim:red:power";
- pwms = <&pwm_AO_ab 1 7812500 0>;
+ pwms = <&pwm_AO_ab 1 7812500 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
};
@@ -187,7 +187,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
};
@@ -81,7 +81,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -7,6 +7,7 @@
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include <dt-bindings/pwm/pwm.h>
/ {
model = "Khadas VIM3";
@@ -167,7 +168,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
};
@@ -25,7 +25,7 @@ vddcpu: regulator-vddcpu {
vin-supply = <&vsys_3v3>;
- pwms = <&pwm_AO_cd 1 1250 0>;
+ pwms = <&pwm_AO_cd 1 1250 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -116,7 +116,7 @@ pwmleds {
power {
label = "sei610:red:power";
- pwms = <&pwm_AO_ab 0 30518 0>;
+ pwms = <&pwm_AO_ab 0 30518 PWM_POLARITY_NORMAL>;
max-brightness = <255>;
linux,default-trigger = "default-on";
active-low;
@@ -187,7 +187,7 @@ vddcpu: regulator-vddcpu {
vin-supply = <&dc_in>;
- pwms = <&pwm_AO_cd 1 1500 0>;
+ pwms = <&pwm_AO_cd 1 1500 PWM_POLARITY_NORMAL>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
@@ -336,7 +336,8 @@ wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ /* PWM_E at 32.768KHz */
+ pwms = <&pwm_ef 0 30518 PWM_POLARITY_NORMAL>;
};
};
@@ -14,6 +14,7 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sound/samsung-i2s.h>
/ {
@@ -913,7 +914,7 @@ charger_reg: CHARGER {
haptic: max77843-haptic {
compatible = "maxim,max77843-haptic";
haptic-supply = <&ldo38_reg>;
- pwms = <&pwm 0 33670 0>;
+ pwms = <&pwm 0 33670 PWM_POLARITY_NORMAL>;
pwm-names = "haptic";
};
};
@@ -57,7 +57,7 @@ vol-up-key {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm1 0 25000 0>;
+ pwms = <&pwm1 0 25000 PWM_POLARITY_NORMAL>;
power-supply = <&vcc3v3_lcd>;
};
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/px30-power.h>
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
#include <dt-bindings/thermal/thermal.h>
@@ -22,7 +22,7 @@ ir_rx {
ir_tx {
compatible = "pwm-ir-tx";
- pwms = <&pwm5 0 25000 0>;
+ pwms = <&pwm5 0 25000 PWM_POLARITY_NORMAL>;
};
leds {
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/soc/rockchip,boot-mode.h>
#include <dt-bindings/thermal/thermal.h>
@@ -47,7 +47,7 @@ backlight: backlight {
240 241 242 243 244 245 246 247
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
- pwms = <&pwm0 0 25000 0>;
+ pwms = <&pwm0 0 25000 PWM_POLARITY_NORMAL>;
};
edp_panel: edp-panel {
@@ -72,7 +72,7 @@ clkin_gmac: external-gmac-clock {
vdd_center: vdd-center {
compatible = "pwm-regulator";
- pwms = <&pwm3 0 25000 0>;
+ pwms = <&pwm3 0 25000 PWM_POLARITY_NORMAL>;
regulator-name = "vdd_center";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
@@ -20,7 +20,7 @@ chosen {
backlight: backlight {
compatible = "pwm-backlight";
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm0 0 25000 0>;
+ pwms = <&pwm0 0 25000 PWM_POLARITY_NORMAL>;
brightness-levels = <
0 1 2 3 4 5 6 7
8 9 10 11 12 13 14 15
@@ -50,7 +50,7 @@ ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
compatible = "pwm-regulator";
regulator-name = "ppvar_centerlogic_pwm";
- pwms = <&pwm3 0 3337 0>;
+ pwms = <&pwm3 0 3337 PWM_POLARITY_NORMAL>;
pwm-supply = <&ppvar_sys>;
pwm-dutycycle-range = <100 0>;
pwm-dutycycle-unit = <100>;
@@ -164,7 +164,7 @@ backlight: backlight {
enable-gpios = <&gpio4 21 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&bl_en>;
- pwms = <&pwm1 0 1000000 0>;
+ pwms = <&pwm1 0 1000000 PWM_POLARITY_NORMAL>;
pwm-delay-us = <10000>;
};
@@ -217,7 +217,7 @@ &ppvar_bigcpu {
&ppvar_bigcpu_pwm {
/* On scarlet ppvar big cpu use pwm3 */
- pwms = <&pwm3 0 3337 0>;
+ pwms = <&pwm3 0 3337 PWM_POLARITY_NORMAL>;
regulator-min-microvolt = <800074>;
regulator-max-microvolt = <1299226>;
};
@@ -101,7 +101,7 @@ ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
compatible = "pwm-regulator";
regulator-name = "ppvar_bigcpu_pwm";
- pwms = <&pwm1 0 3337 0>;
+ pwms = <&pwm1 0 3337 PWM_POLARITY_NORMAL>;
pwm-supply = <&ppvar_sys>;
pwm-dutycycle-range = <100 0>;
pwm-dutycycle-unit = <100>;
@@ -130,7 +130,7 @@ ppvar_litcpu_pwm: ppvar-litcpu-pwm {
compatible = "pwm-regulator";
regulator-name = "ppvar_litcpu_pwm";
- pwms = <&pwm2 0 3337 0>;
+ pwms = <&pwm2 0 3337 PWM_POLARITY_NORMAL>;
pwm-supply = <&ppvar_sys>;
pwm-dutycycle-range = <100 0>;
pwm-dutycycle-unit = <100>;
@@ -159,7 +159,7 @@ ppvar_gpu_pwm: ppvar-gpu-pwm {
compatible = "pwm-regulator";
regulator-name = "ppvar_gpu_pwm";
- pwms = <&pwm0 0 3337 0>;
+ pwms = <&pwm0 0 3337 PWM_POLARITY_NORMAL>;
pwm-supply = <&ppvar_sys>;
pwm-dutycycle-range = <100 0>;
pwm-dutycycle-unit = <100>;
@@ -161,7 +161,7 @@ fan: pwm-fan {
cooling-levels = <0 150 200 255>;
#cooling-cells = <2>;
fan-supply = <&vsys_5v0>;
- pwms = <&pwm0 0 40000 0>;
+ pwms = <&pwm0 0 40000 PWM_POLARITY_NORMAL>;
};
};
@@ -62,7 +62,7 @@ fan: pwm-fan {
cooling-levels = <0 12 18 255>;
#cooling-cells = <2>;
fan-supply = <&vcc12v0_sys>;
- pwms = <&pwm1 0 50000 0>;
+ pwms = <&pwm1 0 50000 PWM_POLARITY_NORMAL>;
};
};
@@ -19,7 +19,7 @@ chosen {
backlight: backlight {
compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 0>;
+ pwms = <&pwm0 0 25000 PWM_POLARITY_NORMAL>;
};
clkin_gmac: external-gmac-clock {
@@ -58,7 +58,7 @@ fan: pwm-fan {
compatible = "pwm-fan";
#cooling-cells = <2>;
fan-supply = <&vcc12v_dcin>;
- pwms = <&pwm1 0 50000 0>;
+ pwms = <&pwm1 0 50000 PWM_POLARITY_NORMAL>;
};
sdio_pwrseq: sdio-pwrseq {
@@ -79,7 +79,7 @@ backlight: backlight {
248 249 250 251 252 253 254 255>;
default-brightness-level = <200>;
enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm0 0 25000 0>;
+ pwms = <&pwm0 0 25000 PWM_POLARITY_NORMAL>;
status = "okay";
};
@@ -9,6 +9,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/power/rk3399-power.h>
+#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/thermal/thermal.h>
/ {
There is the PWM_POLARITY_NORMAL defined and describled in <dt-bindings/pwm/pwm.h> and used by pwm drivers. This patch converts all '0' constant in pwms parameters into PWM_POLARITY_NORMAL. Replace with sed regexp: 's/(pwms = <&[a-zA-Z_0-9]+ [0-9]+ [0-9]+) 0>/\1 PWM_POLARITY_NORMAL>/' Then: - include pwm.h in some dts/dtsi to fix building errors about undefined symbols. - fix the patman warnings about the code format; Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> --- arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 2 +- arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 3 ++- arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 1 + arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 1 + arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 5 +++-- arch/arm64/boot/dts/amlogic/meson-g12a-u200.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 5 +++-- arch/arm64/boot/dts/amlogic/meson-g12b-khadas-vim3.dtsi | 4 ++-- arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 4 ++-- arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 7 ++++--- arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi | 3 ++- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 1 + arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxl-s805x-p241.dts | 3 ++- .../boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts | 2 +- .../arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi | 3 ++- arch/arm64/boot/dts/amlogic/meson-gxm-khadas-vim2.dts | 5 +++-- arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 3 ++- arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi | 4 +++- arch/arm64/boot/dts/amlogic/meson-sm1-khadas-vim3l.dts | 2 +- arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 7 ++++--- arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 3 ++- arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +- arch/arm64/boot/dts/rockchip/px30.dtsi | 1 + arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 1 + arch/arm64/boot/dts/rockchip/rk3399-evb.dts | 4 ++-- arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-gru-chromebook.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-gru-scarlet.dtsi | 4 ++-- arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-nanopc-t4.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts | 2 +- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 1 + 44 files changed, 77 insertions(+), 51 deletions(-)