@@ -19,7 +19,7 @@ config VIDEO_IR_I2C
In doubt, say Y.
#
-# Encoder / Decoder module configuration
+# V4L2 I2C drivers that aren't related with Camera support
#
comment "I2C drivers hidden by 'Autoselect ancillary drivers'"
@@ -28,6 +28,10 @@ comment "I2C drivers hidden by 'Autoselect ancillary drivers'"
menu "I2C Encoders, decoders, sensors and other helper chips"
visible if !MEDIA_HIDE_ANCILLARY_SUBDRV
+#
+# Encoder / Decoder module configuration
+#
+
comment "Audio decoders, processors and mixers"
config VIDEO_TVAUDIO
@@ -62,11 +66,13 @@ config VIDEO_TDA9840
config VIDEO_TDA1997X
tristate "NXP TDA1997x HDMI receiver"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
depends on SND_SOC
select HDMI
select SND_PCM
select V4L2_FWNODE
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
V4L2 subdevice driver for the NXP TDA1997x HDMI receivers.
@@ -204,7 +210,9 @@ comment "Video decoders"
config VIDEO_ADV7180
tristate "Analog Devices ADV7180 decoder"
- depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on GPIOLIB && VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
Support for the Analog Devices ADV7180 video decoder.
@@ -223,8 +231,10 @@ config VIDEO_ADV7183
config VIDEO_ADV748X
tristate "Analog Devices ADV748x decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
depends on OF
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
select V4L2_FWNODE
help
@@ -236,8 +246,10 @@ config VIDEO_ADV748X
config VIDEO_ADV7604
tristate "Analog Devices ADV7604 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
depends on GPIOLIB || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
select HDMI
select V4L2_FWNODE
@@ -260,7 +272,9 @@ config VIDEO_ADV7604_CEC
config VIDEO_ADV7842
tristate "Analog Devices ADV7842 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select HDMI
help
Support for the Analog Devices ADV7842 video decoder.
@@ -347,7 +361,9 @@ config VIDEO_SAA711X
config VIDEO_TC358743
tristate "Toshiba TC358743 decoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select HDMI
select V4L2_FWNODE
help
@@ -515,8 +531,10 @@ config VIDEO_ADV7393
config VIDEO_ADV7511
tristate "Analog Devices ADV7511 encoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
depends on DRM_I2C_ADV7511=n || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select HDMI
help
Support for the Analog Devices ADV7511 video encoder.
@@ -536,7 +554,10 @@ config VIDEO_ADV7511_CEC
config VIDEO_AD9389B
tristate "Analog Devices AD9389B encoder"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
+
help
Support for the Analog Devices AD9389B video encoder.
@@ -568,12 +589,17 @@ config VIDEO_APTINA_PLL
config VIDEO_SMIAPP_PLL
tristate
+#
+# All drivers that are related to Media Camera Support should be here
+#
+
if MEDIA_CAMERA_SUPPORT
config VIDEO_HI556
tristate "Hynix Hi-556 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CONTROLLER
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the Hynix
@@ -584,8 +610,10 @@ config VIDEO_HI556
config VIDEO_IMX214
tristate "Sony IMX214 sensor support"
- depends on GPIOLIB && I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on GPIOLIB && I2C && VIDEO_V4L2
depends on V4L2_FWNODE
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
help
This is a Video4Linux2 sensor driver for the Sony
@@ -596,7 +624,9 @@ config VIDEO_IMX214
config VIDEO_IMX219
tristate "Sony IMX219 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the Sony
@@ -607,7 +637,9 @@ config VIDEO_IMX219
config VIDEO_IMX258
tristate "Sony IMX258 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a Video4Linux2 sensor driver for the Sony
IMX258 camera.
@@ -617,7 +649,9 @@ config VIDEO_IMX258
config VIDEO_IMX274
tristate "Sony IMX274 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
help
This is a V4L2 sensor driver for the Sony IMX274
@@ -625,7 +659,9 @@ config VIDEO_IMX274
config VIDEO_IMX290
tristate "Sony IMX290 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
select V4L2_FWNODE
help
@@ -637,7 +673,9 @@ config VIDEO_IMX290
config VIDEO_IMX319
tristate "Sony IMX319 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a Video4Linux2 sensor driver for the Sony
IMX319 camera.
@@ -647,7 +685,9 @@ config VIDEO_IMX319
config VIDEO_IMX355
tristate "Sony IMX355 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a Video4Linux2 sensor driver for the Sony
IMX355 camera.
@@ -678,7 +718,8 @@ config VIDEO_OV2659
config VIDEO_OV2680
tristate "OmniVision OV2680 sensor support"
- depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
+ depends on VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -689,7 +730,8 @@ config VIDEO_OV2680
config VIDEO_OV2685
tristate "OmniVision OV2685 sensor support"
- depends on VIDEO_V4L2 && I2C && MEDIA_CONTROLLER
+ depends on VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -701,7 +743,9 @@ config VIDEO_OV2685
config VIDEO_OV5640
tristate "OmniVision OV5640 sensor support"
depends on OF
- depends on GPIOLIB && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on GPIOLIB && VIDEO_V4L2 && I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the Omnivision
@@ -710,7 +754,9 @@ config VIDEO_OV5640
config VIDEO_OV5645
tristate "OmniVision OV5645 sensor support"
depends on OF
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -721,7 +767,9 @@ config VIDEO_OV5645
config VIDEO_OV5647
tristate "OmniVision OV5647 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -742,8 +790,9 @@ config VIDEO_OV6650
config VIDEO_OV5670
tristate "OmniVision OV5670 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CONTROLLER
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -754,8 +803,9 @@ config VIDEO_OV5670
config VIDEO_OV5675
tristate "OmniVision OV5675 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CONTROLLER
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -777,7 +827,9 @@ config VIDEO_OV5695
config VIDEO_OV7251
tristate "OmniVision OV7251 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -826,7 +878,9 @@ config VIDEO_OV7740
config VIDEO_OV8856
tristate "OmniVision OV8856 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -844,7 +898,9 @@ config VIDEO_OV9640
config VIDEO_OV9650
tristate "OmniVision OV9650/OV9652 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_SCCB
help
This is a V4L2 sensor driver for the Omnivision
@@ -852,7 +908,9 @@ config VIDEO_OV9650
config VIDEO_OV13858
tristate "OmniVision OV13858 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a Video4Linux2 sensor driver for the OmniVision
@@ -870,14 +928,18 @@ config VIDEO_VS6624
config VIDEO_MT9M001
tristate "mt9m001 support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This driver supports MT9M001 cameras from Micron, monochrome
and colour models.
config VIDEO_MT9M032
tristate "MT9M032 camera sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEO_APTINA_PLL
help
This driver supports MT9M032 camera sensors from Aptina, monochrome
@@ -893,7 +955,9 @@ config VIDEO_MT9M111
config VIDEO_MT9P031
tristate "Aptina MT9P031 support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEO_APTINA_PLL
help
This is a Video4Linux2 sensor driver for the Aptina
@@ -901,7 +965,9 @@ config VIDEO_MT9P031
config VIDEO_MT9T001
tristate "Aptina MT9T001 support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a Video4Linux2 sensor driver for the Aptina
(Micron) mt0t001 3 Mpixel camera.
@@ -926,7 +992,9 @@ config VIDEO_MT9V011
config VIDEO_MT9V032
tristate "Micron MT9V032 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP_I2C
select V4L2_FWNODE
help
@@ -951,7 +1019,9 @@ config VIDEO_SR030PC30
config VIDEO_NOON010PC30
tristate "Siliconfile NOON010PC30 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This driver supports NOON010PC30 CIF camera from Siliconfile
@@ -969,21 +1039,27 @@ config VIDEO_RJ54N1
config VIDEO_S5K6AA
tristate "Samsung S5K6AAFX sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a V4L2 sensor driver for Samsung S5K6AA(FX) 1.3M
camera sensor with an embedded SoC image signal processor.
config VIDEO_S5K6A3
tristate "Samsung S5K6A3 sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a V4L2 sensor driver for Samsung S5K6A3 raw
camera sensor.
config VIDEO_S5K4ECGX
tristate "Samsung S5K4ECGX sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select CRC32
help
This is a V4L2 sensor driver for Samsung S5K4ECGX 5M
@@ -991,7 +1067,9 @@ config VIDEO_S5K4ECGX
config VIDEO_S5K5BAF
tristate "Samsung S5K5BAF sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a V4L2 sensor driver for Samsung S5K5BAF 2M
@@ -1002,28 +1080,29 @@ source "drivers/media/i2c/et8ek8/Kconfig"
config VIDEO_S5C73M3
tristate "Samsung S5C73M3 sensor support"
- depends on I2C && SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && SPI && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a V4L2 sensor driver for Samsung S5C73M3
8 Mpixel camera.
-endif
comment "Lens drivers"
-if MEDIA_CAMERA_SUPPORT
-
config VIDEO_AD5820
tristate "AD5820 lens voice coil support"
- depends on GPIOLIB && I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on GPIOLIB && I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
help
This is a driver for the AD5820 camera lens voice coil.
It is used for example in Nokia N900 (RX-51).
config VIDEO_AK7375
tristate "AK7375 lens voice coil support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a driver for the AK7375 camera lens voice coil.
AK7375 is a 12 bit DAC with 120mA output current sink
@@ -1032,8 +1111,9 @@ config VIDEO_AK7375
config VIDEO_DW9714
tristate "DW9714 lens voice coil support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a driver for the DW9714 camera lens voice coil.
DW9714 is a 10 bit DAC with 120mA output current sink
@@ -1042,30 +1122,30 @@ config VIDEO_DW9714
config VIDEO_DW9807_VCM
tristate "DW9807 lens voice coil support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This is a driver for the DW9807 camera lens voice coil.
DW9807 is a 10 bit DAC with 100mA output current sink
capability. This is designed for linear control of
voice coil motors, controlled via I2C serial interface.
-endif
comment "Flash devices"
-if MEDIA_CAMERA_SUPPORT
-
config VIDEO_ADP1653
tristate "ADP1653 flash support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
help
This is a driver for the ADP1653 flash controller. It is used for
example in Nokia N900.
config VIDEO_LM3560
tristate "LM3560 dual flash driver support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
select REGMAP_I2C
help
This is a driver for the lm3560 dual flash controllers. It controls
@@ -1073,13 +1153,18 @@ config VIDEO_LM3560
config VIDEO_LM3646
tristate "LM3646 dual flash driver support"
- depends on I2C && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
select REGMAP_I2C
help
This is a driver for the lm3646 dual flash controllers. It controls
flash, torch LEDs.
-endif
+endif # MEDIA_CAMERA_SUPPORT
+
+#
+# Other V4L2 drivers that aren't related with Camera support
+#
comment "Video improvement chips"
@@ -1168,8 +1253,9 @@ config VIDEO_I2C
config VIDEO_ST_MIPID02
tristate "STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
Support for STMicroelectronics MIPID02 CSI-2 to PARALLEL bridge.
@@ -1181,4 +1267,4 @@ config VIDEO_ST_MIPID02
endmenu
-endif
+endif # VIDEO_V4L2
@@ -1,7 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_ET8EK8
tristate "ET8EK8 camera sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
@@ -1,7 +1,8 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_M5MOLS
tristate "Fujitsu M-5MOLS 8MP sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
This driver supports Fujitsu M-5MOLS camera sensor with ISP
@@ -1,8 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_SMIAPP
tristate "SMIA++/SMIA sensor support"
- depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAVE_CLK
- depends on MEDIA_CAMERA_SUPPORT
+ depends on I2C && VIDEO_V4L2 && HAVE_CLK
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEO_SMIAPP_PLL
select V4L2_FWNODE
help
@@ -1,11 +1,13 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_COBALT
tristate "Cisco Cobalt support"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
depends on PCI_MSI && MTD_COMPLEX_MAPPINGS
depends on (GPIOLIB && DRM_I2C_ADV7511=n) || COMPILE_TEST
depends on SND
depends on MTD
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select I2C_ALGOBIT
select SND_PCM
select VIDEO_ADV7604
@@ -2,9 +2,9 @@
config VIDEO_IPU3_CIO2
tristate "Intel ipu3-cio2 driver"
depends on VIDEO_V4L2 && PCI
- depends on VIDEO_V4L2_SUBDEV_API
depends on (X86 && ACPI) || COMPILE_TEST
- depends on MEDIA_CONTROLLER
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
select VIDEOBUF2_DMA_SG
@@ -1,12 +1,12 @@
# SPDX-License-Identifier: GPL-2.0-only
config STA2X11_VIP
tristate "STA2X11 VIP Video For Linux"
+ depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS && I2C
depends on STA2X11 || COMPILE_TEST
select VIDEO_ADV7180 if MEDIA_SUBDRV_AUTOSELECT
select VIDEOBUF2_DMA_CONTIG
- depends on PCI && VIDEO_V4L2 && VIRT_TO_BUS
- depends on VIDEO_V4L2_SUBDEV_API
- depends on I2C
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
Say Y for support for STA2X11 VIP (Video Input Port) capture
device.
@@ -63,7 +63,9 @@ config VIDEO_VIU
config VIDEO_MUX
tristate "Video Multiplexer"
select MULTIPLEXER
- depends on VIDEO_V4L2 && OF && VIDEO_V4L2_SUBDEV_API && MEDIA_CONTROLLER
+ depends on VIDEO_V4L2 && OF
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select REGMAP
select V4L2_FWNODE
help
@@ -71,10 +73,12 @@ config VIDEO_MUX
config VIDEO_OMAP3
tristate "OMAP 3 Camera support"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && I2C
depends on (ARCH_OMAP3 && OMAP_IOMMU) || COMPILE_TEST
depends on COMMON_CLK && OF
select ARM_DMA_USE_IOMMU if OMAP_IOMMU
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select MFD_SYSCON
select V4L2_FWNODE
@@ -99,16 +103,19 @@ config VIDEO_PXA27x
config VIDEO_QCOM_CAMSS
tristate "Qualcomm V4L2 Camera Subsystem driver"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2
depends on (ARCH_QCOM && IOMMU_DMA) || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_SG
select V4L2_FWNODE
config VIDEO_S3C_CAMIF
tristate "Samsung S3C24XX/S3C64XX SoC Camera Interface driver"
- depends on VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API
- depends on PM
+ depends on VIDEO_V4L2 && I2C && PM
depends on ARCH_S3C64XX || PLAT_S3C24XX || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
help
This is a v4l2 driver for s3c24xx and s3c64xx SoC series camera
@@ -119,9 +126,10 @@ config VIDEO_S3C_CAMIF
config VIDEO_STM32_DCMI
tristate "STM32 Digital Camera Memory Interface (DCMI) support"
- depends on VIDEO_V4L2 && OF && MEDIA_CONTROLLER
+ depends on VIDEO_V4L2 && OF
depends on ARCH_STM32 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
+ select MEDIA_CONTROLLER
select V4L2_FWNODE
help
This module makes the STM32 Digital Camera Memory Interface (DCMI)
@@ -148,7 +156,9 @@ source "drivers/media/platform/sunxi/Kconfig"
config VIDEO_TI_CAL
tristate "TI CAL (Camera Adaptation Layer) driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_DEV && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
depends on SOC_DRA7XX || ARCH_K3 || COMPILE_TEST
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
@@ -432,9 +442,11 @@ config VIDEO_RENESAS_FCP
config VIDEO_RENESAS_VSP1
tristate "Renesas VSP1 Video Processing Engine"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2
depends on ARCH_RENESAS || COMPILE_TEST
depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
help
@@ -1,8 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_AM437X_VPFE
tristate "TI AM437x VPFE video capture driver"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2
depends on SOC_AM43XX || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
@@ -1,8 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_ATMEL_ISC
tristate "ATMEL Image Sensor Controller (ISC) support"
- depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && COMMON_CLK
depends on ARCH_AT91 || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select REGMAP_MMIO
select V4L2_FWNODE
@@ -13,8 +13,8 @@ if VIDEO_CADENCE
config VIDEO_CADENCE_CSI2RX
tristate "Cadence MIPI-CSI2 RX Controller"
depends on VIDEO_V4L2
- depends on MEDIA_CONTROLLER
- depends on VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
Support for the Cadence MIPI CSI2 Receiver controller.
@@ -25,8 +25,8 @@ config VIDEO_CADENCE_CSI2RX
config VIDEO_CADENCE_CSI2TX
tristate "Cadence MIPI-CSI2 TX Controller"
depends on VIDEO_V4L2
- depends on MEDIA_CONTROLLER
- depends on VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
Support for the Cadence MIPI CSI2 Transceiver controller.
@@ -2,9 +2,10 @@
config VIDEO_SAMSUNG_EXYNOS4_IS
tristate "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && OF && COMMON_CLK
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- depends on OF && COMMON_CLK
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select V4L2_FWNODE
help
Say Y here to enable camera host interface devices for
@@ -1,8 +1,10 @@
# SPDX-License-Identifier: GPL-2.0
config VIDEO_RCAR_CSI2
tristate "R-Car MIPI CSI-2 Receiver"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF
+ depends on VIDEO_V4L2 && OF
depends on ARCH_RENESAS || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select RESET_CONTROLLER
select V4L2_FWNODE
help
@@ -14,8 +16,10 @@ config VIDEO_RCAR_CSI2
config VIDEO_RCAR_VIN
tristate "R-Car Video Input (VIN) Driver"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && MEDIA_CONTROLLER
+ depends on VIDEO_V4L2 && OF
depends on ARCH_RENESAS || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
@@ -1,7 +1,9 @@
config VIDEO_SUN4I_CSI
tristate "Allwinner A10 CMOS Sensor Interface Support"
- depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA
+ depends on VIDEO_V4L2 && COMMON_CLK && HAS_DMA
depends on ARCH_SUNXI || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
@@ -1,8 +1,10 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_SUN6I_CSI
tristate "Allwinner V3s Camera Sensor Interface driver"
- depends on VIDEO_V4L2 && COMMON_CLK && VIDEO_V4L2_SUBDEV_API && HAS_DMA
+ depends on VIDEO_V4L2 && COMMON_CLK && HAS_DMA
depends on ARCH_SUNXI || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select REGMAP_MMIO
select V4L2_FWNODE
@@ -2,7 +2,9 @@
config VIDEO_XILINX
tristate "Xilinx Video IP (EXPERIMENTAL)"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && OF && HAS_DMA
+ depends on VIDEO_V4L2 && OF && HAS_DMA
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
help
@@ -9,7 +9,9 @@ menu "SPI helper chips"
config VIDEO_GS1662
tristate "Gennum Serializers video"
- depends on SPI && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on SPI && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
help
Enable the GS1662 driver which serializes video streams.
@@ -1,7 +1,9 @@
# SPDX-License-Identifier: GPL-2.0-only
config VIDEO_VIMC
tristate "Virtual Media Controller Driver (VIMC)"
- depends on VIDEO_DEV && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_DEV && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_VMALLOC
select VIDEO_V4L2_TPG
help
@@ -2,8 +2,9 @@
config VIDEO_HANTRO
tristate "Hantro VPU driver"
depends on ARCH_ROCKCHIP || COMPILE_TEST
- depends on VIDEO_DEV && VIDEO_V4L2 && MEDIA_CONTROLLER
- depends on MEDIA_CONTROLLER_REQUEST_API
+ depends on VIDEO_DEV && VIDEO_V4L2
+ select MEDIA_CONTROLLER
+ select MEDIA_CONTROLLER_REQUEST_API
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
select V4L2_MEM2MEM_DEV
@@ -2,8 +2,9 @@
config VIDEO_IMX_MEDIA
tristate "i.MX5/6 V4L2 media core driver"
depends on ARCH_MXC || COMPILE_TEST
- depends on MEDIA_CONTROLLER && VIDEO_V4L2 && IMX_IPUV3_CORE
- depends on VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2 && IMX_IPUV3_CORE
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_FWNODE
@@ -2,8 +2,9 @@
config VIDEO_IPU3_IMGU
tristate "Intel ipu3-imgu driver"
depends on PCI && VIDEO_V4L2
- depends on MEDIA_CONTROLLER && VIDEO_V4L2_SUBDEV_API
depends on X86
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select IOMMU_IOVA
select VIDEOBUF2_DMA_SG
help
@@ -2,8 +2,10 @@
config VIDEO_OMAP4
tristate "OMAP 4 Camera support"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C
+ depends on VIDEO_V4L2 && I2C
depends on ARCH_OMAP4 || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select MFD_SYSCON
select VIDEOBUF2_DMA_CONTIG
help
@@ -2,8 +2,10 @@
config VIDEO_ROCKCHIP_ISP1
tristate "Rockchip Image Signal Processing v1 Unit driver"
- depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+ depends on VIDEO_V4L2
depends on ARCH_ROCKCHIP || COMPILE_TEST
+ select MEDIA_CONTROLLER
+ select VIDEO_V4L2_SUBDEV_API
select VIDEOBUF2_DMA_CONTIG
select VIDEOBUF2_VMALLOC
select V4L2_FWNODE
@@ -1,10 +1,11 @@
# SPDX-License-Identifier: GPL-2.0
config VIDEO_SUNXI_CEDRUS
tristate "Allwinner Cedrus VPU driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && MEDIA_CONTROLLER
+ depends on VIDEO_DEV && VIDEO_V4L2
depends on HAS_DMA
depends on OF
- depends on MEDIA_CONTROLLER_REQUEST_API
+ select MEDIA_CONTROLLER
+ select MEDIA_CONTROLLER_REQUEST_API
select SUNXI_SRAM
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
There are lots of drivers that only work when the media controller and/or the V4L2 subdev APIs are present. Right now, someone need to first enable those APIs before using those drivers. Well, ideally, drivers, should, instead *optionally* depend on it, in order for PC camera drivers to be able to use them, but nowadays most drivers are UVC cameras, with don't require a sensor driver. So, be it. Let's instead make them select the MEDIA_CONTROLLER and the SUBDEV API, in order to make easier for people to be able of enabling them. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- drivers/media/i2c/Kconfig | 210 ++++++++++++------ drivers/media/i2c/et8ek8/Kconfig | 4 +- drivers/media/i2c/m5mols/Kconfig | 5 +- drivers/media/i2c/smiapp/Kconfig | 5 +- drivers/media/pci/cobalt/Kconfig | 4 +- drivers/media/pci/intel/ipu3/Kconfig | 4 +- drivers/media/pci/sta2x11/Kconfig | 6 +- drivers/media/platform/Kconfig | 28 ++- drivers/media/platform/am437x/Kconfig | 4 +- drivers/media/platform/atmel/Kconfig | 4 +- drivers/media/platform/cadence/Kconfig | 8 +- drivers/media/platform/exynos4-is/Kconfig | 5 +- drivers/media/platform/rcar-vin/Kconfig | 8 +- .../media/platform/sunxi/sun4i-csi/Kconfig | 4 +- .../media/platform/sunxi/sun6i-csi/Kconfig | 4 +- drivers/media/platform/xilinx/Kconfig | 4 +- drivers/media/spi/Kconfig | 4 +- drivers/media/test_drivers/vimc/Kconfig | 4 +- drivers/staging/media/hantro/Kconfig | 5 +- drivers/staging/media/imx/Kconfig | 5 +- drivers/staging/media/ipu3/Kconfig | 3 +- drivers/staging/media/omap4iss/Kconfig | 4 +- drivers/staging/media/rkisp1/Kconfig | 4 +- drivers/staging/media/sunxi/cedrus/Kconfig | 5 +- 24 files changed, 236 insertions(+), 105 deletions(-)